Jared Boone
d9568f7f47
Update date code to 20150901.
2015-09-01 11:09:19 -07:00
Jared Boone
1c2b3b82ce
Update layers exported during PCB plot.
2015-09-01 10:17:30 -07:00
Jared Boone
73e9dabf72
Change default layer visibility.
2015-09-01 10:14:36 -07:00
Jared Boone
f3f5a9647b
Board stack-up drawing clean-up.
2015-09-01 10:13:51 -07:00
Jared Boone
e979b9b64d
Change drawing lines width to 0.1mm.
2015-09-01 10:02:07 -07:00
Jared Boone
968ec6d176
Change PCB stack-up for vendor.
2015-09-01 10:01:39 -07:00
Jared Boone
128dda23bb
Note about separate PTH and NPTH drill files.
2015-08-30 17:23:53 -07:00
Jared Boone
85f9b4cdc5
Add default dimension units note.
2015-08-30 17:18:14 -07:00
Jared Boone
c5cd3a4498
Add title block with copyright, license.
2015-08-30 17:12:32 -07:00
Jared Boone
d2436ca229
Add notes block.
2015-08-30 17:11:59 -07:00
Jared Boone
18b272bcab
Add PCB dimensions
2015-08-30 16:24:07 -07:00
Jared Boone
d3acd79df8
Add PCB stack data and diagram.
2015-08-30 16:23:55 -07:00
Jared Boone
375cf6f238
Tighten solder mask around LCD connector.
...
Shooting for 4mil mask web between pads.
2015-08-30 14:35:04 -07:00
Jared Boone
84b92365f9
Move and shrink copper layer legend.
...
Doesn't need to be visible after assembly. I think.
2015-08-30 10:14:36 -07:00
Jared Boone
ea2cfb7ad2
Center text in layer legend.
2015-08-30 09:42:47 -07:00
Jared Boone
732561d01c
Change vias to 13mil, 7mil annular ring.
...
Was 13.5mm, but why?!?
2015-08-29 22:31:29 -07:00
Jared Boone
1340991dba
Reduce solder mask margin on WM8731.
...
Trying to squeeze some mask web in there!
2015-08-29 18:14:23 -07:00
Jared Boone
56c7c31cbb
More footprint units cleanup.
2015-08-29 17:54:26 -07:00
Jared Boone
bda376df4b
KiCad added courtyard layers.
2015-08-29 17:20:41 -07:00
Jared Boone
436e6fd21b
Footprint cleanup
...
Remove courtyard lines from silkscreen.
Round coordinates/dimensions to correct values (KiCad's old units don't convert nicely to the new units).
Restore U3 refdes silkscreen visibility.
2015-08-29 17:14:06 -07:00
Jared Boone
c78b7fe196
Reduce mask margin on QFP pads.
2015-08-29 16:12:45 -07:00
Jared Boone
d61f3802cb
Remove line in/out components and traces, microphone.
...
Clean up traces and via stitching affected by removed components.
2015-08-27 16:54:38 -07:00
Jared Boone
29243a5fd1
Schematic and netlist from schematic modifications.
2015-08-27 16:54:38 -07:00
Jared Boone
70d7ecc51b
Clean up PCB net labels to match code, CPLD.
2015-08-27 16:54:38 -07:00
Jared Boone
75d9aa9c73
Remove extra CPLD code internal signals.
2015-08-27 16:54:38 -07:00
Jared Boone
19764ce693
Swap function of P2_8, P2_4 in schematic, firmware, CPLD.
...
gpio_unused: P2_4 -> P2_8
gpio_lcd_rd: P2_8 -> P2_4
P2_8 is a very long line, shared with DFU button.
Revise schematic to match CPLD signal names.
2015-08-27 16:54:38 -07:00
Jared Boone
b6e25692dc
Label 1V8 regulator bypass/adjust capacitor as DNI.
...
Was already DNI in assembly BOM. TCR2EF shows that pin as NC.
2015-08-27 16:54:38 -07:00
Jared Boone
1ca4f45d9e
Change VBAT capacitor to DNI.
...
HackRF One has 100nF capacitor on VBAT. Having 10uF capacitor on PortaPack VBAT may slowly drain the coin cell when in storage, and add a bit of leakage current when installed.
2015-08-27 16:54:38 -07:00
Jared Boone
8dfd68a6b3
Removed electret microphone.
2015-08-27 16:54:37 -07:00
Jared Boone
cd4840f1f9
Remove line in/out circuitry.
2015-08-27 16:54:37 -07:00
Jared Boone
84ffaaef33
Back-annotate CVPCB data into schematic.
...
Remove CVPCB .cmp file, since it's a deprecated by the KiCad project.
2015-08-27 16:54:37 -07:00
Jared Boone
bf4521bf35
Update schematic issue/copyright date.
...
KiCad also made some automatic tweaks for latest build (bzr 6109).
2015-08-27 16:54:37 -07:00
Jared Boone
3fea68d777
Adjust wideband specan gain to match other modes.
2015-08-27 14:57:05 -07:00
Jared Boone
b13081696d
Simplify MessageQueue pop() usage.
2015-08-27 14:35:17 -07:00
Jared Boone
d8b3b4cb6b
Check queue empty only once when reading messages.
...
There was a second is_empty() call hidden in the pop() call, so the while(condition) was redundant.
2015-08-27 14:27:29 -07:00
Jared Boone
5d9079f87f
Stop streaming when changing baseband configuration.
...
Without, the baseband would get confused.
2015-08-27 14:07:15 -07:00
Jared Boone
e751e10e45
Add wideband spectrum processor.
2015-08-27 13:57:31 -07:00
Jared Boone
23ac04ad56
Make channel spectrum members protected, not private.
2015-08-27 13:51:55 -07:00
Jared Boone
c7907e948c
Extract FSKProcessor into separate files.
2015-08-27 13:31:39 -07:00
Jared Boone
ffe829cf67
Extract WidebandFMAudio into separate files.
2015-08-27 13:19:34 -07:00
Jared Boone
7c5db55f8f
Extract NarrowbandFMAudio into separate files.
2015-08-27 13:14:45 -07:00
Jared Boone
e246ea2c39
Extract NarrowbandAMAudio class into separate files.
2015-08-27 13:07:07 -07:00
Jared Boone
6bf61cbe88
Extract BasebandProcessor into separate files.
2015-08-27 11:11:08 -07:00
Jared Boone
b0e9afe26c
Add missing #includes.
2015-08-27 11:10:44 -07:00
Jared Boone
04d05368c7
Push static variables and spectrum calc into BasebandProcessor.
2015-08-27 10:48:29 -07:00
Jared Boone
de0777f476
Extract FMSquelch into separate files.
2015-08-27 09:59:03 -07:00
Jared Boone
b904971ef2
Extract IIR filter configurations into separate file.
2015-08-27 09:58:37 -07:00
Jared Boone
c92bf12fbd
Extract ChannelDecimator into separate files.
2015-08-27 09:49:14 -07:00
Jared Boone
035ec84f04
Wrap MessageQueue.push() with mutex.
...
This addresses issue #61 , occasional FIFO/data corruption. With the mutex, any thread on one core can write to the FIFO. But still, only one thread on one core should read from the FIFO.
2015-08-26 14:18:03 -07:00
Jared Boone
7937ea7327
Enable DMB instruction at end of FIFO data copy.
...
Can't hurt to make sure FIFO and buffer state are flushed before returning to caller...
2015-08-26 14:13:51 -07:00
