App is embedded in firmware and is loaded into app RAM when firmware
starts.
App continuously calls SET_LED syscalls.
Simulation: `make tb_application_fpga_irqpoc_c_example`
Allow FW RAM access only in the following execution contexts:
- Firmware mode
- IRQ_SYSCALL_HI
Input port `system_mode` of the `fw_ram` module is replaced with an
enable port. Since access to FW RAM not longer depend only on
system_mode
Adds a basic example firmware that copies an app to app RAM. The app
triggers syscall interrupts and tries to execute ROM code from app mode.
A make target (`tb_application_fpga_irqpoc_with_app`) that simulates a
Tkey running the firmware is added.
A proof-of-concept of enabling PicoRV32 interrupts. Two interrupt
sources, which can be triggered by writes to memory addresses, are
added. The design has only been simulated, not run on hardware.
Synthesis:
Ice40 LC utilization is 93% (4934/5280) when built using tkey-builder:4
Simulation:
A `tb_application_fpga_irqpoc` target is added. Running `make
tb_application_fpga_irqpoc` creates `tb_application_fpga_sim.fst` which
can be inspected in GTKWave or Surfer.
Firmware:
A simple firmware is added in `fw/irqpoc`. It enables both interrupts
and triggers each interrupt once.
Custom PicoRV32 instructions are located in `custom_ops.S`. It is
imported from upstream PicoRV32 commit:
70f3c33ac8
This removes the possibility to configure the bit rate, data bits and
stop bits at runtime from the API. This reduces the
usage of LCs with ~4%.
It is still possible to configure the core before building.
Update digest of application_fpga.bin.sha256
- The API changes name from `_SWITCH_APP` to `_SYSTEM_MODE_CTRL`.
- The registers and wires changes name to `system_mode_*`, instead of a
mix of `switch_app_*` and `fw_app_mode`.
- Remove the define `NOCONSOLE`, add define `QEMU_CONSOLE`
- Inverse the use of it, add the define to have QEMU debug output in fw.
- Add a make target `qemu_firmware.elf` which builds the firmware with
QEMU console enabled.
Co-authored-by: Mikael Ågren <mikael@tillitis.se>
Add API address to trigger system reset.
When written to will send system_reset signal
to the reset generator, which then perform a complete
reset cycle of the FPGA system.
Signed-off-by: Joachim Strömbergson <joachim@assured.se>
Update:
- README
- testbench
- Symbolic names and variables in fw
- registers
- port name and wires
- Update fpga and fw digests
Signed-off-by: Joachim Strömbergson <joachim@assured.se>
- Remove all text about other software than firmware.
- Remove the Reset section.
- Include a diagram and detailed explanation about the state machine
in close vicinity.
- Describe the test firmware.
Co-authored-by: Joachim Strömbergson <joachim@assured.se>
The RAM address and data scrambling API was called twice, once before filling
RAM with random values, and once after. Since moving to a significantly
better PRNG (xorwow) this is now deemed unnecessary. See issue #225.
This changes both FPGA and firmware hashes.
Modify the loop to zeroise the FW-RAM instead of the
RAM. RAM is filled with random data at the start of main().
Changes firmware and bitstream digests.
Signed-off-by: Joachim Strömbergson <joachim@assured.se>
- NOTE: This is an optional feature, not built by default. Not included
in the tk1 for sale at Tillitis shop.
- This makes it possible to interface the SPI flash onboard TKey.
- To include the SPI master in the build, use `make application_fpga.bin
YOSYS_FLAG=-DINCLUDE_SPI_MASTER`.
Signed-off-by: Joachim Strömbergson <joachim@assured.se>
xorwow provides significantly better random data, compared to previously
used function. Making it harder to predict what data RAM is filled with.
It adds a startup time of approx 80 ms, but can be compensated with
optimising other parts of the startup routine.
This changes both firmware and fpga hashes.
Signed-off-by: Joachim Strömbergson <joachim@assured.se>
The memset() responsible for the zeroisation of the secure_ctx under
the compute_cdi() function in FW's main.c, was optimised away by the
compiler. Instead of using memset(), secure_wipe() is introduced
which uses a volatile keyword to prevent the compiler to try to
optimise it. Secure_wipe() is now used on all locations handling
removal of sensitive data.
Use _RAM_ADDR_RAND instead of _RAM_ASLR since this is not OS-level
ASLR we're talking about. It's address randomization as seen from
outside of the CPU, not from the process running inside it. Ordinary
ASLR is visible from the CPU.
This file is also included in at least qemu (GPL-2.0-or-later) besides
tillitis-key1 (GPL-2.0-only) and tkey-libs (GPL-2.0-only) so it's
licensed as GPL v2 or later even if the rest of the project is -only.
Instead of putting memory constant into an enum we use defines.
Use the direct memory address instead of ORing constants together to
compute the address.
An enum in ISO C is a signed int. Some of are memory addresses are to
large to fit in a signed int. This is not a problem since we're not
using ISO C (-std=gnu99) but it doesn't look very nice if you turn on
pedantic warnings. Also, if someone would use another compiler which
at least supports the inline assembly we use, but possible not other
GNU extensions, things would probably break.
Instead of putting memory constant into an enum we use defines.
Use the direct memory address instead of ORing constants together to
compute the address.
An enum in ISO C is a signed int. Some of are memory addresses are to
large to fit in a signed int. This is not a problem since we're not
using ISO C (-std=gnu99) but it doesn't look very nice if you turn on
pedantic warnings. Also, if someone would use another compiler which
at least supports the inline assembly we use, but possible not other
GNU extensions, things would probably break.
Since UDS is not byte-readable we copy it by word to local_uds. Now
UDS lives for a short while in local_uds on the stack in FW_RAM and in
the internal buffer of the blake2s context (also in FW_RAM) but is
very soon overwritten.
Add clang-tidy and splint static analytics check. For now, we use only
the cert-* warnings on clang-tidy and run splint with a lot of flags
to allow more things.
Changes to silence these analytics:
- Stop returning stuff from our debug print functions. We don't check
them anyway and we don't have any way of detecting transmission
failure.
- Declare more things static that isn't used outside of a file.
- Change types to be more consistent, typically to size_t or
something or to uint32_t.
