* Added support for extracting firmware from TAR file (with apps)
* Added tar to usb cdc firmware command.
* Serial flash tar
* Show error on bad tar
* Check tar for valid filenames
- Recon repeat delay, range: from 0s to 254s, timer is played before each TX
- fixed missing '<' '>' around button names for DELETE and REMOVE name to indicate that they can also be used to skip in the list
- added missing pmem recon dump entries
* UI for Recon Repeater config
* persistent recon repeat settings
* record_view: added possibility to force keep the provided record filename
* working auto record to same file
* Recon TX
* added Repeater type
* adding yellow coloring on Repeater config+a modal, comments in the code
* default repeater values
* Initial commit - wip
* Half part of the transition of baseband processor.
* More SGD
* WIP, Weather refactor, UI improv
* Rename
* Added 4msps, and fixes
* Fixes
* princeton working
* Renamed proc_weather, bc now multifunctional
* Proto: bett
* FPS_CAME = 4,
FPS_PRASTEL = 5,
FPS_AIRFORCE = 6,
* Came Atomo, fixes
* Separate weather and sgd, bc of baseband size limit
* Fix display
* Save space
* More protos
* Dooya proto added
* More protos
* add protos
* More protos
* Move weather to ext app
* nw
* Revert "Move weather to ext app"
This reverts commit 8a84aac2f5.
* revert
* Fix merge
* Better naming
* More protos
* More protos
* Add protos
* Fix warning
* Add NeroRadio
* more protos
* more protos
* More protos
* Shrink a bit
* fixes
* More protos
* Nicer code
* Fix naming
* Fix format
* Remove unused
* Fix some protos, that needs a LOOOONG part with the same lo/high
* Modify key calculation
* WIP on add to save list
* Added rewriting existing lines and appending new to same file.
* format
* not looking on new file.
* Added temp list due to some issue of recent being updated during save
I was receiving a system halt and this seems to fix it. Needs more testing though.
* clang format
* Stored entries backward. Fix.
* Update file working, need to replace temp file though.
* support for a sdcard speed option
* trying to link sdio_cclk_set from file
* changed io to IO in checkbox text
* changed order so high speed option is read after pmem is restored from sd
* test button
* took out unneeded comment
* force behavior of test button
---------
Co-authored-by: GullCode <gullradriel@hotmail.com>
* Add files via upload
* Add files via upload
* Add files via upload
* Add files via upload
* Clang
* Clang
* Tweak position of field on screen
* Reverted text on Write button per reviewer feedback
* Initial BLE Comm commit.
* SCAN_RSP MAC was reversed.
* Added Auto Channel Hop.
* Improvements to Tx to better handle timers.
* Auto channel and more work on timers.
* more advertisement numbers.
* Showing highest dB first
* Including namestring in search
* Using replace seems to work better.
* bletx cleanup
* removing pop
* pop is needed on this view.
* cleanup switching
* reduce to 1 entry list
* Setting to use the name of BLE with a toggle checkbox.
* Removed &nav reference.
* Removing const
* Fixed issue with memory being run out when switching from a previous app
* Fixed not setting updated progressbar for each new packet.
* Running simple state machine to better catch in between buffers.
* Fixed buffer size 2048 was too large for a decimated before only containing 512 (2048/4 Decimation) Bytes.
* attempt at trying to minimize uncleared str buffers
* fixed bug not fully displaying rx packet
* added sending selected packet
* setting packet count to 100 as 1 is too aggressive for speed > 2
* setting limit to 50 as 50 does not bog down UI at speed 5.
* fix tx channel getting out of sync with freq
* Added parsing for ble name added focus for ble tx play button.
* Added sort by name
* Fixed issue where we were pushing too early before pop was finished.
* Fix ordering
* Fix field location.
* truncating entries to stop memory overflow
* Added Number of Hits.
* Limiting number of hits to uint16_t, as any higher would overflow screen
* Limiting number of hits to uint16_t due to possible screen overflow.
* Stop creating a log every time app starts. Cluttering log folder.
* Cleanup of BLE Rx naming and added switching between the two.
Fixed bug in packet count not resetting when opening new file in BLE Tx
* Bug fix and color change.
* Changed some buttons name and fixed blank output if typed
* code format
---------
Co-authored-by: Gull Ra Driel <gull@NiloreaDevLaptop.home>
Co-authored-by: gullradriel <gull@nomail.net>
* First BLE work
* Adding new fsk proc WIP
* Reverting ble stuff
* Initial compile working
* more work.
* Adding waterfall for debug
* more edits to debug
* Work to get widgets to show.
* cleanup before attempting diff fsk modulation method
* Temporary debug to learn how decimation scales.
* Tab view for console and spectrum. Spectrum still not working right.
* Fixed spectrum offset.
* Added audio sampling rate increments to freqman
* Added overriding range for frequency field and working off deviation
* BLE cleanup. Got PDU parsing.
* Parsing CRC
* forgot :
* Removing AA again because cluttering UI
* fix compile
* attempt at throttling.
* WIP changes.
* Decimating by 4 to handle issue with overloading.
* Attempt to parse MAC still needs work.
* Small fixes. MAC still wrong.
* Fixed invalid indexing on Symbols.
* List view of BLE Mac Addresses
* Added Channel Option and improved GUI header.
* renaming to dB and fixing some warnings.
* Advertisements only.
* Initial cut of BLE Advertisement scan app.
* Copyrights
* formatting correctly in association to clang13
* Fixing warning and hiding fsk rx.
* spacing
* Removing some cmake install files that weren't suppose to be there.
* missed some.
* Added name to about.
* Edits for PR review pt.1
* Refactor ORing with 0 doesn't make sense.
* remove parenthesis
* More PR Review changes.
* Fix compiler error.
* PR Review edits.
* PR review changes.
* Fixes.
* Unneeded ;
* Update ui_about_simple.cpp
* Disabling frequency stepping.
* removing unused label
* Fixing something that got messed up in merge?
* removing file that got added.
* editing labels.
* Added sort functionality.
* removed unused code.
---------
Co-authored-by: jLynx <admin@jlynx.net>
* First BLE work
* Adding new fsk proc WIP
* Reverting ble stuff
* Initial compile working
* more work.
* Adding waterfall for debug
* more edits to debug
* Work to get widgets to show.
* cleanup before attempting diff fsk modulation method
* Temporary debug to learn how decimation scales.
* Tab view for console and spectrum. Spectrum still not working right.
* Fixed spectrum offset.
* Added audio sampling rate increments to freqman
* Added overriding range for frequency field and working off deviation
* BLE cleanup. Got PDU parsing.
* Parsing CRC
* forgot :
* Removing AA again because cluttering UI
* fix compile
* attempt at throttling.
* WIP changes.
* Decimating by 4 to handle issue with overloading.
* Attempt to parse MAC still needs work.
* Small fixes. MAC still wrong.
* Fixed invalid indexing on Symbols.
* List view of BLE Mac Addresses
* Added Channel Option and improved GUI header.
* renaming to dB and fixing some warnings.
* Advertisements only.
* Initial cut of BLE Advertisement scan app.
* Copyrights
* formatting correctly in association to clang13
* Fixing warning and hiding fsk rx.
* spacing
* Removing some cmake install files that weren't suppose to be there.
* missed some.
* Added name to about.
* Edits for PR review pt.1
* Refactor ORing with 0 doesn't make sense.
* remove parenthesis
* More PR Review changes.
* Fix compiler error.
* PR Review edits.
* PR review changes.
* Fixes.
* Unneeded ;
* Update ui_about_simple.cpp
---------
Co-authored-by: jLynx <admin@jlynx.net>
* Add files via upload
* Add files via upload
* Add files via upload
* Add files via upload
* Add files via upload
* Add files via upload
* Add files via upload
* Add files via upload
* Add files via upload
* Added trim icon
* Added trim icon
* Added Trim button to FileMan
* Added Trim button to FileMan
* Added Trim button to FileMan
* Added Trim button to FileMan
* Activating TX Low Pass Filter in Second IF IC
* solving PR conversation revisions
* Final TX LPF decision for ADSB_TX
* Small comments correction.
* Added set TX LPF also in APRS, BurgerPgr,Jammer
* Alpha order sub-menus
* WIP Getting Remote types outlined
* WIP building UI
* WIP adding RemoteButton control
* WIP Fix build
* WIP Basic editing support
* Border on the active button
* Make TxView2 sane
* Add easier RGB color creation from uint32
* Center some button icons
* WIP Remote - main UI
* WIP main UI mostly working, can send
* Add 'join' utility
* WIP save/load
* Pre-alloc buttons to prevent focus dangling
* Alpha order settings/debug pages
* Add UI for picking capture and set frequency
* WIP Getting really close now
* Fix path for init name
* Some fit & finish
* Force console scroll area to be multiple of line height. Tons of comments.
* Resize POCSAG console to fill height.
* Make scoll behavior comment clearer
* WIP Refactoring
* WordExtractor building
* Fix buffer sizes and squelch execute
* Move impls to cpp file
* Baud indicator
* WIP new bit extractor
* New approach for bit extraction.
* Code fit and finish
* Fix case on button
* Cleanup
* Adjust rate miss threshold
* Fix count bits error calculation.
* Reset color for well-formed message fragments
* better colors
* Fix POGSAG decode state machine
* Invert is_message to make more clear
* Use new escape string constants
* Run ECC twice, better diagnostics
* center status icon
---------
Co-authored-by: kallanreed <kallanreed@noreply.github.com>
* Color strings
* Color strings
* Color strings
* Color strings
* Color strings
* Color strings & fix first group scrolling off screen
* Color strings
* Color strings
* Clang
* Clang
* Clang attempt #3
* Update ui_painter.cpp
* Update ui_widget.cpp
* Clang test
* Clang
* Clang test
* Update ui_about_simple.cpp
* Update lge_app.cpp
* Set bandwidth_filter in pogsac
* WIP pocsag UI revamp
* Settings UI, better console, UI Revamp
* Add baud rate to error messages
* Reset last_addr in error cases
* Show malformed messages as different color vs hiding
* Use light grey to indicate low quality decode
---------
Co-authored-by: kallanreed <kallanreed@noreply.github.com>
* Use new settings in recon
* Trim on string value read, remove dupe entry
* Check update_range flag when setting values
* Add a few saved settings to scanner
* Add copywrite note
* Fixed behavior of auto update m-ranges, added min and max to sd load and save if option not used
* changing xor swap by std::swap
* Fixed consecutive green color
* Non-empty directory check
* Non-empty directory check
* Display error when attempting to delete non-empty directory
* Clang
Delete white-space that the friggin editor added
* is_empty_directory
* is_empty_directory
* is_empty_directory
* Now need to check if it's a directory first
* Default frequency
* Default frequency
* Use sample rate from .ini file if present
* Eliminate unneeded sampling_rate variable
* Eliminate unneeded sampling_rate variable
* Attempt to fix Capture startup hang
* Pump baseband_queue on M4 startup
* Synchronization experiment
* Moved SpectrumCapture member, better hang detection for M0
* Prevent execute from working on members until class has been initialized.
* Formatting
* Remove workaround.
* Rebase on next
* C8 conversion
* C8 conversion
* C8 support
* C8 support
* C8 support
* C8 support
* Don't auto-convert GPS C8 files
* C8 support
* C8 support
* C8 support
* Remove hang workaround (different PR)
* Comment change
* Clang
* Clang
* Clang
* Merged change from PR #1287
* C8 support
* C8 support
* Improve bandwidth display
* Merged minor optimization from PR 1289
* Merge change from PR 1289
* Use complex types for C8/C16 conversion
* C8 support
* C8 support
* C8 support
* C8 support
* Roll back changes
* Roll back C8 changes
* C8 support
* C8 support
* C8 support
* C8 support
* C8 support
* Don't transmit samples past EOF
* Don't transmit samples past EOF
* Clang
* Clang attempt
* Clang attempt
* C8 support
* Clang
* No need to scale progress now that widget is fixed
* Use memcpy vs byte copy, elim progress scaling, correct comments
* Minor optimization in C16->C8 conversion
* Only copy bytes actually read from file
* WIP new edit UI
* Fix textfield highlight
* WIP new edit
* Wrap up first pass of freqman edit
* Fix indexing of options
---------
Co-authored-by: kallanreed <kallanreed@noreply.github.com>
* Support showing invalid entries in Freqman and allow minor edits
* Use light_grey instead of grey
* Fix comment
* Fix null in description bug
* Fix spacing in delete entry dialog
* trim in delete modal
* FreqmanDB direct file
* Clear UI for short lists
* Final touches on freqlist UI.
* Support vertical alignment in NewButton
* New buttons in FreqMan
* Wiring up UI to filewrapper actions
* Work around empty file
* WIP freqman changes/memory perf/stash
* Split ui tone_key function out for testing.
* Add more tests and fix bugs.
* Use default max_entries in recond
* Set limit back to 90 for now
* Added fonts viewer (debug) app
* Added fonts viewer (debug) app
* Clang
* Use degree symbol vs asterisk for latitude/longitude degrees
* Save a few bytes by not overriding on_key
* Save a few bytes by not overriding on_key
* Clang
* Use filesystem::path type vs string for BMP file name
* Use filesystem::path type vs string for BMP files
* Use a global const file path string for "/splash.bmp"
* Support for viewing BMP files and setting as Splash screen
* Support for viewing BMP files and setting as Splash screen
* Support for viewing BMP files and setting as Splash screen
* Update ui_ss_viewer.cpp
* Update ui_ss_viewer.hpp
* WIP RadioState init
* TX/RX cleanup
* Update all apps using RadioState and setting modulation mode
* Set apps to use AM mode
* Don't push modulation update in RadioState.
* Support passing overrides to Audio and MicTX
* Support set_nearest on OptionsField, fix recon step
* Fix audio, typo
---------
Co-authored-by: kallanreed <kylereed@manzana.lan>
Co-authored-by: kallanreed <kallanreed@noreply.github.com>
* Generate CTCSS messages at fixed rate regardless of tone freq
* Generate CTCSS messages at fixed rate regardless of tone freq
* Function for generating CTCSS description strings
* Function for generating CTCSS description strings
* Increase width of CTCSS text to include tone freq
* Increase width of CTCSS text field to include frequency
* Use CTCSS tone freq when saving HAM freqs to freq file
* Use function in tone_key.cpp for displaying CTCSS string
* Use function in tone_key.cpp for CTCSS descr strings
* Use function in tone_key.cpp for CTCSS descr strings
* Clang test
* Clang
* Clang
* Support for reading CTCSS tones from FreqMan file
* Clang
* Clean up and eliminate floating point
* Clean up and eliminate floating point
* Corrected CTCSS field length
* Corrected CTCSS field length
* Clang
