72 commits

Author	SHA1	Message	Date
Mark Qvist	6b21940e59	Improved Heltec v4 LNA gain-value threshold parameter	2025-11-21 16:00:40 +01:00
Mark Qvist	121f9e79e8	Added support for handling noise floor calculations on devices with LNA gain variance during LNA recalibration. Fixed potential incoming packet buffer corruption on split packet reception at high bitrates.	2025-11-19 14:40:34 +01:00
Mark Qvist	2319813a65	Added support for connecting ESP32S3 RNodes over WiFi	2025-11-17 16:41:25 +01:00
markqvist	1e9654012f	Merge pull request #116 from Am0g-us/patch-1 ... Fix generic esp32 reset pin	2025-11-10 11:43:06 +01:00
Mark Qvist	d06ec065de	Implemented support for Heltec V4 with PA	2025-11-07 19:13:29 +01:00
Mark Qvist	2947df3349	Added Heltec v4 board defines and scaffold	2025-11-01 15:33:24 +01:00
Am0g-us	3eae317cdf	Fix generic esp32 reset pin ... Fix for critical Issue: GPIO 36 on the ESP32 is an input-only pin (part of the ADC1 group along with GPIO 34, 35, and 39). This is a hardware limitation of the ESP32 microcontroller. These pins cannot be configured as outputs. This means the current pin assignment in the firmware will not work correctly for the reset functionality, as pinMode(_reset, OUTPUT) and digitalWrite(_reset, LOW/HIGH) calls will fail to actually drive the pin. The reset pin for a generic ESP32 board should be reassigned to a GPIO that supports output mode (any GPIO that is not 34, 35, 36, or 39). This appears to be a configuration error in the board definition that would prevent proper initialization of the SX1278 LoRa module on these board configurations.	2025-10-19 01:30:57 +00:00
Mark Qvist	eab0284700	Lowered OCP limits to counteract brownout crash when sending at high TX power on some boards	2025-07-17 19:44:54 +02:00
Mark Qvist	9d2da569c9	Cleanup	2025-04-13 01:28:19 +02:00
Mark Qvist	7d868b4db6	Support for XIAO ESP32S3	2025-04-13 00:11:21 +02:00
Kevin Brosius	cbedd72993	Seeed ESP32S3 - enable button sleep, stopRadio at sleep ... to sleep sx1262 also.	2025-02-23 18:52:17 -05:00
Kevin Brosius	c3fe3713b0	Seeed ESP32S3 - Enable user button, tied to yellow LED on ... ESP32S3 board. Can be shared, but configure as button input only for now. Top LED for TX indication.	2025-02-23 16:57:36 -05:00
Kevin Brosius	bc97e513e8	Initial support for Seeed ESP32S3 with Wio-SX1262 ... Work in progress Status: Boots, display works on Xiao espansion base, radio is recognized Todo: PMU Firmware hash fails even if generated and then written Radio testing Buttons / LEDs other?	2025-02-23 06:52:27 -05:00
Mark Qvist	ea33f0cba7	T-Echo pin definitions	2025-01-15 21:10:01 +01:00
Mark Qvist	2d2d90847a	Initial T-Echo support	2025-01-15 18:38:14 +01:00
Mark Qvist	2119d381b3	Refactored T3S3 board name variable	2025-01-15 10:21:15 +01:00
Mark Qvist	8cf6e9cb40	Added battery support to Heltec T114	2025-01-13 18:05:35 +01:00
Mark Qvist	71e73580f7	Cleanup	2025-01-09 18:41:35 +01:00
Mark Qvist	218a38adb7	Optimise packet handling for SX1280 fast data rates	2025-01-09 00:01:49 +01:00
Mark Qvist	254225e917	Cleanup	2025-01-08 16:50:29 +01:00
Mark Qvist	5ec063c939	Reworked CSMA algorithm	2025-01-07 20:15:26 +01:00
Mark Qvist	08651f92f7	Reworked SX1262 LoRa carrier detection	2025-01-07 15:14:44 +01:00
Mark Qvist	217db4bcd3	Update release builds to include T3S3 SX1280 PA	2025-01-04 20:20:35 +01:00
Mark Qvist	6bf06ca94e	T3S3 SX1280 support	2025-01-03 19:16:19 +01:00
Mark Qvist	315bcb02a0	SX1280 EEPROM checks	2025-01-03 12:52:01 +01:00
Mark Qvist	470f4f4d09	Merge branch 'master' of github.com:markqvist/RNode_Firmware	2025-01-03 12:01:33 +01:00
Mark Qvist	9174dbd34a	Board defines for T3S3-SX1280	2025-01-03 11:54:48 +01:00
liamcottle	abde6561b5	use neopixel on heltec t114	2025-01-02 23:39:54 +13:00
liamcottle	6a43bf51ef	remove unused rx switch	2025-01-02 15:28:10 +13:00
liamcottle	f9234733e2	add support for heltec t114	2025-01-02 15:14:18 +13:00
Mark Qvist	2263b20b81	Set default OCP	2024-12-10 18:42:13 +01:00
Mark Qvist	d599109562	Set default OCP	2024-12-10 16:37:55 +01:00
Mark Qvist	aba9a317dd	Set default OCP	2024-12-10 16:05:08 +01:00
Mark Qvist	d88f231332	Added ability to specify per-board transceiver OCP limit	2024-12-10 15:35:29 +01:00
Mark Qvist	94215c4bce	Added input button and sleep config to T-Beam and Heltec v2 boards	2024-10-05 22:20:34 +02:00
Mark Qvist	bfc215b2a3	Fix T3S3 SX1262 dio pin and build config	2024-10-05 20:55:48 +02:00
liamcottle	e4deac3060	add support for user button on rak wismesh pocket which uses RAK4630 internally	2024-10-05 19:12:26 +13:00
liamcottle	49a524e8d5	add support for rak1921 oled display on rak4631 boards	2024-10-05 16:07:22 +13:00
Mark Qvist	9556f0b91b	Added support for T3S3 boards with SX127x modems	2024-10-05 02:47:54 +02:00
Mark Qvist	1ac3a6c2c8	Remove boot-mode/reset requirements for T3S3 flashing	2024-10-05 01:07:44 +02:00
Mark Qvist	6974a50d10	Added T-Beam Supreme support	2024-10-05 00:42:19 +02:00
Mark Qvist	bd887f7de2	Disable T-Deck display until functional	2024-10-03 02:53:11 +02:00
Mark Qvist	fef27b194c	Basic T-Deck display support	2024-10-03 02:51:54 +02:00
Mark Qvist	8bdd85e648	Added T-Deck support	2024-10-03 00:38:49 +02:00
Mark Qvist	304cdd2968	Cleanup	2024-09-30 19:18:30 +02:00
Mark Qvist	d2133ba5e0	Added battery status and console support to Heltec V3	2024-09-27 00:28:37 +02:00
markqvist	30fb26e1a8	Merge branch 'master' into master	2024-05-18 10:26:10 +02:00
Mark Qvist	f19ccf7078	Added deep sleep support on T3S3	2024-05-18 01:07:38 +02:00
jacob.eva	cda32c405f	Fix RAK4631 antenna switch utilisation	2024-05-17 07:44:00 +01:00
jacob.eva	94828d825b	Add firmware hash calculation to RAK4631 + more	2024-05-13 22:25:24 +01:00