mirror of
https://github.com/markqvist/RNode_Firmware.git
synced 2024-12-25 07:29:41 -05:00
Added support for T3S3 boards with SX127x modems
This commit is contained in:
Mark Qvist
parent
1ac3a6c2c8
commit
9556f0b91b
28
Boards.h
28
Boards.h
@ -41,11 +41,11 @@
|
||||
#define MODEL_A2 0xA2 // RNode v2.1, 433 MHz
|
||||
#define MODEL_A7 0xA7 // RNode v2.1, 868 MHz
|
||||
|
||||
#define BOARD_RNODE_NG_22 0x42 // RNode hardware revision v2.2
|
||||
#define BOARD_RNODE_NG_22 0x42 // RNode hardware revision v2.2 (T3S3)
|
||||
#define MODEL_A1 0xA1 // RNode v2.2, 433 MHz with SX1268
|
||||
#define MODEL_A5 0xA1 // RNode v2.2, 433 MHz with SX1278
|
||||
#define MODEL_A5 0xA5 // RNode v2.2, 433 MHz with SX1278
|
||||
#define MODEL_A6 0xA6 // RNode v2.2, 868 MHz with SX1262
|
||||
#define MODEL_AA 0xA6 // RNode v2.2, 868 MHz with SX1276
|
||||
#define MODEL_AA 0xAA // RNode v2.2, 868 MHz with SX1276
|
||||
|
||||
#define PRODUCT_TBEAM 0xE0 // T-Beam devices
|
||||
#define BOARD_TBEAM 0x33
|
||||
@ -396,11 +396,6 @@
|
||||
|
||||
#elif BOARD_MODEL == BOARD_RNODE_NG_22
|
||||
#define IS_ESP32S3 true
|
||||
#define MODEM SX1262
|
||||
#define DIO2_AS_RF_SWITCH true
|
||||
#define HAS_BUSY true
|
||||
#define HAS_TCXO true
|
||||
|
||||
#define HAS_DISPLAY true
|
||||
#define HAS_CONSOLE false
|
||||
#define HAS_BLUETOOTH false
|
||||
@ -414,8 +409,6 @@
|
||||
#define HAS_SLEEP true
|
||||
#define PIN_WAKEUP GPIO_NUM_0
|
||||
#define WAKEUP_LEVEL 0
|
||||
// #define PIN_DISP_SLEEP 21
|
||||
// #define DISP_SLEEP_LEVEL HIGH
|
||||
const int pin_btn_usr1 = 0;
|
||||
|
||||
const int pin_cs = 7;
|
||||
@ -423,10 +416,16 @@
|
||||
const int pin_sclk = 5;
|
||||
const int pin_mosi = 6;
|
||||
const int pin_miso = 3;
|
||||
const int pin_tcxo_enable = -1;
|
||||
|
||||
const int pin_dio = 33;
|
||||
const int pin_busy = 34;
|
||||
const int pin_dio = 9;
|
||||
|
||||
#if MODEM == SX1262
|
||||
#define DIO2_AS_RF_SWITCH true
|
||||
#define HAS_BUSY true
|
||||
#define HAS_TCXO true
|
||||
const int pin_busy = 34;
|
||||
const int pin_dio = 33;
|
||||
const int pin_tcxo_enable = -1;
|
||||
#endif
|
||||
|
||||
const int pin_np = 38;
|
||||
const int pin_dac = 25;
|
||||
@ -436,6 +435,7 @@
|
||||
const int SD_MOSI = 11;
|
||||
const int SD_CLK = 14;
|
||||
const int SD_CS = 13;
|
||||
|
||||
#if HAS_NP == false
|
||||
#if defined(EXTERNAL_LEDS)
|
||||
const int pin_led_rx = 37;
|
||||
|
||||
2
Config.h
2
Config.h
@ -20,7 +20,7 @@
|
||||
#define CONFIG_H
|
||||
|
||||
#define MAJ_VERS 0x01
|
||||
#define MIN_VERS 0x4b
|
||||
#define MIN_VERS 0x4c
|
||||
|
||||
#define MODE_HOST 0x11
|
||||
#define MODE_TNC 0x12
|
||||
|
||||
36
Makefile
36
Makefile
@ -76,7 +76,10 @@ firmware-tbeam_sx126x: check_bt_buffers
|
||||
arduino-cli compile --log --fqbn esp32:esp32:t-beam -e --build-property "build.partitions=no_ota" --build-property "upload.maximum_size=2097152" --build-property "compiler.cpp.extra_flags=\"-DBOARD_MODEL=0x33\" \"-DMODEM=0x03\""
|
||||
|
||||
firmware-t3s3:
|
||||
arduino-cli compile --log --fqbn "esp32:esp32:esp32s3:CDCOnBoot=cdc" -e --build-property "build.partitions=no_ota" --build-property "upload.maximum_size=2097152" --build-property "compiler.cpp.extra_flags=\"-DBOARD_MODEL=0x42\""
|
||||
arduino-cli compile --log --fqbn "esp32:esp32:esp32s3:CDCOnBoot=cdc" -e --build-property "build.partitions=no_ota" --build-property "upload.maximum_size=2097152" --build-property "compiler.cpp.extra_flags=\"-DBOARD_MODEL=0x42\" \"-DMODEM=0x03\""
|
||||
|
||||
firmware-t3s3_sx127x:
|
||||
arduino-cli compile --log --fqbn "esp32:esp32:esp32s3:CDCOnBoot=cdc" -e --build-property "build.partitions=no_ota" --build-property "upload.maximum_size=2097152" --build-property "compiler.cpp.extra_flags=\"-DBOARD_MODEL=0x42\" \"-DMODEM=0x01\""
|
||||
|
||||
firmware-tdeck:
|
||||
arduino-cli compile --log --fqbn "esp32:esp32:esp32s3:CDCOnBoot=cdc" -e --build-property "build.partitions=no_ota" --build-property "upload.maximum_size=2097152" --build-property "compiler.cpp.extra_flags=\"-DBOARD_MODEL=0x3B\""
|
||||
@ -206,8 +209,8 @@ upload-t3s3:
|
||||
arduino-cli upload -p /dev/ttyACM0 --fqbn esp32:esp32:esp32s3
|
||||
@sleep 1
|
||||
rnodeconf /dev/ttyACM0 --firmware-hash $$(./partition_hashes ./build/esp32.esp32.esp32s3/RNode_Firmware.ino.bin)
|
||||
@sleep 3
|
||||
python ./Release/esptool/esptool.py --chip esp32s3 --port /dev/ttyACM0 --baud 921600 --before default_reset --after hard_reset write_flash -z --flash_mode dio --flash_freq 80m --flash_size 4MB 0x210000 ./Release/console_image.bin
|
||||
#@sleep 3
|
||||
#python ./Release/esptool/esptool.py --chip esp32s3 --port /dev/ttyACM0 --baud 921600 --before default_reset --after hard_reset write_flash -z --flash_mode dio --flash_freq 80m --flash_size 4MB 0x210000 ./Release/console_image.bin
|
||||
|
||||
upload-featheresp32:
|
||||
arduino-cli upload -p /dev/ttyUSB0 --fqbn esp32:esp32:featheresp32
|
||||
@ -368,6 +371,33 @@ release-t3s3:
|
||||
zip --junk-paths ./Release/rnode_firmware_t3s3.zip ./Release/esptool/esptool.py ./Release/console_image.bin build/rnode_firmware_t3s3.boot_app0 build/rnode_firmware_t3s3.bin build/rnode_firmware_t3s3.bootloader build/rnode_firmware_t3s3.partitions
|
||||
rm -r build
|
||||
|
||||
release-t3s3_sx127x:
|
||||
arduino-cli compile --fqbn "esp32:esp32:esp32s3:CDCOnBoot=cdc" -e --build-property "build.partitions=no_ota" --build-property "upload.maximum_size=2097152" --build-property "compiler.cpp.extra_flags=\"-DBOARD_MODEL=0x42\" \"-DMODEM=0x01\""
|
||||
cp ~/.arduino15/packages/esp32/hardware/esp32/$(ARDUINO_ESP_CORE_VER)/tools/partitions/boot_app0.bin build/rnode_firmware_t3s3_sx127x.boot_app0
|
||||
cp build/esp32.esp32.esp32s3/RNode_Firmware.ino.bin build/rnode_firmware_t3s3_sx127x.bin
|
||||
cp build/esp32.esp32.esp32s3/RNode_Firmware.ino.bootloader.bin build/rnode_firmware_t3s3_sx127x.bootloader
|
||||
cp build/esp32.esp32.esp32s3/RNode_Firmware.ino.partitions.bin build/rnode_firmware_t3s3_sx127x.partitions
|
||||
zip --junk-paths ./Release/rnode_firmware_t3s3_sx127x.zip ./Release/esptool/esptool.py ./Release/console_image.bin build/rnode_firmware_t3s3_sx127x.boot_app0 build/rnode_firmware_t3s3_sx127x.bin build/rnode_firmware_t3s3_sx127x.bootloader build/rnode_firmware_t3s3_sx127x.partitions
|
||||
rm -r build
|
||||
|
||||
release-tdeck:
|
||||
arduino-cli compile --fqbn "esp32:esp32:esp32s3:CDCOnBoot=cdc" -e --build-property "build.partitions=no_ota" --build-property "upload.maximum_size=2097152" --build-property "compiler.cpp.extra_flags=\"-DBOARD_MODEL=0x3B\""
|
||||
cp ~/.arduino15/packages/esp32/hardware/esp32/$(ARDUINO_ESP_CORE_VER)/tools/partitions/boot_app0.bin build/rnode_firmware_tdeck.boot_app0
|
||||
cp build/esp32.esp32.esp32s3/RNode_Firmware.ino.bin build/rnode_firmware_tdeck.bin
|
||||
cp build/esp32.esp32.esp32s3/RNode_Firmware.ino.bootloader.bin build/rnode_firmware_tdeck.bootloader
|
||||
cp build/esp32.esp32.esp32s3/RNode_Firmware.ino.partitions.bin build/rnode_firmware_tdeck.partitions
|
||||
zip --junk-paths ./Release/rnode_firmware_tdeck.zip ./Release/esptool/esptool.py ./Release/console_image.bin build/rnode_firmware_tdeck.boot_app0 build/rnode_firmware_tdeck.bin build/rnode_firmware_tdeck.bootloader build/rnode_firmware_tdeck.partitions
|
||||
rm -r build
|
||||
|
||||
release-tbeam_supreme:
|
||||
arduino-cli compile --fqbn "esp32:esp32:esp32s3:CDCOnBoot=cdc" -e --build-property "build.partitions=no_ota" --build-property "upload.maximum_size=2097152" --build-property "compiler.cpp.extra_flags=\"-DBOARD_MODEL=0x3D\""
|
||||
cp ~/.arduino15/packages/esp32/hardware/esp32/$(ARDUINO_ESP_CORE_VER)/tools/partitions/boot_app0.bin build/rnode_firmware_tbeam_supreme.boot_app0
|
||||
cp build/esp32.esp32.esp32s3/RNode_Firmware.ino.bin build/rnode_firmware_tbeam_supreme.bin
|
||||
cp build/esp32.esp32.esp32s3/RNode_Firmware.ino.bootloader.bin build/rnode_firmware_tbeam_supreme.bootloader
|
||||
cp build/esp32.esp32.esp32s3/RNode_Firmware.ino.partitions.bin build/rnode_firmware_tbeam_supreme.partitions
|
||||
zip --junk-paths ./Release/rnode_firmware_tbeam_supreme.zip ./Release/esptool/esptool.py ./Release/console_image.bin build/rnode_firmware_tbeam_supreme.boot_app0 build/rnode_firmware_tbeam_supreme.bin build/rnode_firmware_tbeam_supreme.bootloader build/rnode_firmware_tbeam_supreme.partitions
|
||||
rm -r build
|
||||
|
||||
release-featheresp32: check_bt_buffers
|
||||
arduino-cli compile --fqbn esp32:esp32:featheresp32 -e --build-property "build.partitions=no_ota" --build-property "upload.maximum_size=2097152" --build-property "compiler.cpp.extra_flags=\"-DBOARD_MODEL=0x34\""
|
||||
cp ~/.arduino15/packages/esp32/hardware/esp32/$(ARDUINO_ESP_CORE_VER)/tools/partitions/boot_app0.bin build/rnode_firmware_featheresp32.boot_app0
|
||||
|
||||
@ -1206,6 +1206,7 @@ void validate_status() {
|
||||
}
|
||||
} else {
|
||||
hw_ready = false;
|
||||
Serial.write("Invalid EEPROM checksum\r\n");
|
||||
#if HAS_DISPLAY
|
||||
if (disp_ready) {
|
||||
device_init_done = true;
|
||||
@ -1215,7 +1216,7 @@ void validate_status() {
|
||||
}
|
||||
} else {
|
||||
hw_ready = false;
|
||||
// Serial.write("Invalid EEPROM configuration\r\n");
|
||||
Serial.write("Invalid EEPROM configuration\r\n");
|
||||
#if HAS_DISPLAY
|
||||
if (disp_ready) {
|
||||
device_init_done = true;
|
||||
@ -1225,7 +1226,7 @@ void validate_status() {
|
||||
}
|
||||
} else {
|
||||
hw_ready = false;
|
||||
// Serial.write("Device unprovisioned, no device configuration found in EEPROM\r\n");
|
||||
Serial.write("Device unprovisioned, no device configuration found in EEPROM\r\n");
|
||||
#if HAS_DISPLAY
|
||||
if (disp_ready) {
|
||||
device_init_done = true;
|
||||
|
||||
14
Utilities.h
14
Utilities.h
@ -1095,10 +1095,12 @@ void setTXPower() {
|
||||
if (model == MODEL_A2) LoRa->setTxPower(lora_txp, PA_OUTPUT_PA_BOOST_PIN);
|
||||
if (model == MODEL_A3) LoRa->setTxPower(lora_txp, PA_OUTPUT_RFO_PIN);
|
||||
if (model == MODEL_A4) LoRa->setTxPower(lora_txp, PA_OUTPUT_RFO_PIN);
|
||||
if (model == MODEL_A5) LoRa->setTxPower(lora_txp, PA_OUTPUT_PA_BOOST_PIN);
|
||||
if (model == MODEL_A6) LoRa->setTxPower(lora_txp, PA_OUTPUT_PA_BOOST_PIN);
|
||||
if (model == MODEL_A7) LoRa->setTxPower(lora_txp, PA_OUTPUT_PA_BOOST_PIN);
|
||||
if (model == MODEL_A8) LoRa->setTxPower(lora_txp, PA_OUTPUT_PA_BOOST_PIN);
|
||||
if (model == MODEL_A9) LoRa->setTxPower(lora_txp, PA_OUTPUT_PA_BOOST_PIN);
|
||||
if (model == MODEL_AA) LoRa->setTxPower(lora_txp, PA_OUTPUT_PA_BOOST_PIN);
|
||||
|
||||
if (model == MODEL_B3) LoRa->setTxPower(lora_txp, PA_OUTPUT_PA_BOOST_PIN);
|
||||
if (model == MODEL_B4) LoRa->setTxPower(lora_txp, PA_OUTPUT_PA_BOOST_PIN);
|
||||
@ -1326,11 +1328,11 @@ bool eeprom_lock_set() {
|
||||
}
|
||||
|
||||
bool eeprom_product_valid() {
|
||||
#if HAS_EEPROM
|
||||
uint8_t rval = EEPROM.read(eeprom_addr(ADDR_PRODUCT));
|
||||
#elif MCU_VARIANT == MCU_NRF52
|
||||
uint8_t rval = eeprom_read(eeprom_addr(ADDR_PRODUCT));
|
||||
#endif
|
||||
#if HAS_EEPROM
|
||||
uint8_t rval = EEPROM.read(eeprom_addr(ADDR_PRODUCT));
|
||||
#elif MCU_VARIANT == MCU_NRF52
|
||||
uint8_t rval = eeprom_read(eeprom_addr(ADDR_PRODUCT));
|
||||
#endif
|
||||
|
||||
#if PLATFORM == PLATFORM_AVR
|
||||
if (rval == PRODUCT_RNODE || rval == PRODUCT_HMBRW) {
|
||||
@ -1360,7 +1362,7 @@ bool eeprom_model_valid() {
|
||||
#elif BOARD_MODEL == BOARD_RNODE_NG_21
|
||||
if (model == MODEL_A2 || model == MODEL_A7) {
|
||||
#elif BOARD_MODEL == BOARD_RNODE_NG_22
|
||||
if (model == MODEL_A1 || model == MODEL_A6) {
|
||||
if (model == MODEL_A1 || model == MODEL_A6 || model == MODEL_A5 || model == MODEL_AA) {
|
||||
#elif BOARD_MODEL == BOARD_HMBRW
|
||||
if (model == MODEL_FF || model == MODEL_FE) {
|
||||
#elif BOARD_MODEL == BOARD_TBEAM
|
||||
|
||||
@ -106,7 +106,12 @@ void sx127x::flush() { }
|
||||
bool sx127x::preInit() {
|
||||
pinMode(_ss, OUTPUT);
|
||||
digitalWrite(_ss, HIGH);
|
||||
SPI.begin();
|
||||
|
||||
#if BOARD_MODEL == BOARD_RNODE_NG_22
|
||||
SPI.begin(pin_sclk, pin_miso, pin_mosi, pin_cs);
|
||||
#else
|
||||
SPI.begin();
|
||||
#endif
|
||||
|
||||
// Check modem version
|
||||
uint8_t version;
|
||||
|
||||
Loading…
Reference in New Issue
Block a user