Added T-Beam Supreme support

Boards.h

@@ -27,22 +27,78 @@
   #define MCU_ESP32           0x81
   #define MCU_NRF52           0x71
 
-  #define BOARD_RNODE         0x31
-  #define BOARD_HMBRW         0x32
+  // Products, boards and models ////
+  #define PRODUCT_RNODE       0x03 // RNode devices
+  #define BOARD_RNODE         0x31 // Original v1.0 RNode
+  #define MODEL_A4            0xA4 // RNode v1.0, 433 MHz
+  #define MODEL_A9            0xA9 // RNode v1.0, 868 MHz
+
+  #define BOARD_RNODE_NG_20   0x40 // RNode hardware revision v2.0
+  #define MODEL_A3            0xA3 // RNode v2.0, 433 MHz
+  #define MODEL_A8            0xA8 // RNode v2.0, 868 MHz
+
+  #define BOARD_RNODE_NG_21   0x41 // RNode hardware revision v2.1
+  #define MODEL_A2            0xA2 // RNode v2.1, 433 MHz
+  #define MODEL_A7            0xA7 // RNode v2.1, 868 MHz
+
+  #define BOARD_RNODE_NG_22   0x42 // RNode hardware revision v2.2
+  #define MODEL_A1            0xA1 // RNode v2.2, 433 MHz
+  #define MODEL_A6            0xA6 // RNode v2.2, 868 MHz
+
+  #define PRODUCT_TBEAM       0xE0 // T-Beam devices
   #define BOARD_TBEAM         0x33
+  #define MODEL_E4            0xE4 // T-Beam SX1278, 433 Mhz
+  #define MODEL_E9            0xE9 // T-Beam SX1276, 868 Mhz
+  #define MODEL_E3            0xE3 // T-Beam SX1268, 433 Mhz
+  #define MODEL_E8            0xE8 // T-Beam SX1262, 868 Mhz
+
+  #define PRODUCT_TDECK_V1    0xD0
+  #define BOARD_TDECK         0x3B
+  #define MODEL_D4            0xD4 // LilyGO T-Deck, 433 MHz
+  #define MODEL_D9            0xD9 // LilyGO T-Deck, 868 MHz
+
+  #define PRODUCT_TBEAM_S_V1  0xEA
+  #define BOARD_TBEAM_S_V1    0x3D
+  #define MODEL_DB            0xDB // LilyGO T-Beam Supreme, 433 MHz
+  #define MODEL_DC            0xDC // LilyGO T-Beam Supreme, 868 MHz
+
+  #define PRODUCT_T32_10      0xB2
+  #define BOARD_LORA32_V1_0   0x39
+  #define MODEL_BA            0xBA // LilyGO T3 v1.0, 433 MHz
+  #define MODEL_BB            0xBB // LilyGO T3 v1.0, 868 MHz
+
+  #define PRODUCT_T32_20      0xB0
+  #define BOARD_LORA32_V2_0   0x36
+  #define MODEL_B3            0xB3 // LilyGO T3 v2.0, 433 MHz
+  #define MODEL_B8            0xB8 // LilyGO T3 v2.0, 868 MHz
+
+  #define PRODUCT_T32_21      0xB1
+  #define BOARD_LORA32_V2_1   0x37
+  #define MODEL_B4            0xB4  // LilyGO T3 v2.1, 433 MHz
+  #define MODEL_B9            0xB9  // LilyGO T3 v2.1, 868 MHz
+
+  #define PRODUCT_H32_V2      0xC0  // Board code 0x38
+  #define BOARD_HELTEC32_V2   0x38
+  #define MODEL_C4            0xC4  // Heltec Lora32 v2, 433 MHz
+  #define MODEL_C9            0xC9  // Heltec Lora32 v2, 868 MHz
+
+  #define PRODUCT_H32_V3      0xC1
+  #define BOARD_HELTEC32_V3   0x3A
+  #define MODEL_C5            0xC5 // Heltec Lora32 v3, 433 MHz
+  #define MODEL_CA            0xCA // Heltec Lora32 v3, 868 MHz
+
+  #define PRODUCT_RAK4631     0x10
+  #define BOARD_RAK4631       0x51
+  #define MODEL_11            0x11 // RAK4631, 433 Mhz
+  #define MODEL_12            0x12 // RAK4631, 868 Mhz
+
+  #define PRODUCT_HMBRW       0xF0
+  #define BOARD_HMBRW         0x32
   #define BOARD_HUZZAH32      0x34
   #define BOARD_GENERIC_ESP32 0x35
-  #define BOARD_LORA32_V2_0   0x36
-  #define BOARD_LORA32_V2_1   0x37
-  #define BOARD_LORA32_V1_0   0x39
-  #define BOARD_HELTEC32_V2   0x38
-  #define BOARD_HELTEC32_V3   0x3A
-  #define BOARD_TDECK         0x3B
-  #define BOARD_RNODE_NG_20   0x40
-  #define BOARD_RNODE_NG_21   0x41
-  #define BOARD_RNODE_NG_22   0x42
   #define BOARD_GENERIC_NRF52 0x50
-  #define BOARD_RAK4631       0x51
+  #define MODEL_FE            0xFE // Homebrew board, max 17dBm output power
+  #define MODEL_FF            0xFF // Homebrew board, max 14dBm output power
 
   #if defined(__AVR_ATmega1284P__)
     #define PLATFORM PLATFORM_AVR
@@ -443,6 +499,57 @@
         #endif
       #endif
 
+    #elif BOARD_MODEL == BOARD_TBEAM_S_V1
+      #define IS_ESP32S3 true
+      #define MODEM SX1262
+      #define DIO2_AS_RF_SWITCH true
+      #define HAS_BUSY true
+      #define HAS_TCXO true
+
+      #define HAS_DISPLAY true
+      #define HAS_CONSOLE true
+      #define HAS_BLUETOOTH false
+      #define HAS_BLE true
+      #define HAS_PMU true
+      #define HAS_NP false
+      #define HAS_SD false
+      #define HAS_EEPROM true
+
+      #define HAS_INPUT true
+      #define HAS_SLEEP false
+      
+      #define PMU_IRQ 40
+      #define I2C_SCL 41
+      #define I2C_SDA 42
+
+      const int pin_btn_usr1 = 0;
+
+      const int pin_cs = 10;
+      const int pin_reset = 5;
+      const int pin_sclk = 12;
+      const int pin_mosi = 11;
+      const int pin_miso = 13;
+      const int pin_tcxo_enable = -1;
+      const int pin_dio = 1;
+      const int pin_busy = 4;
+      
+      const int SD_MISO = 37;
+      const int SD_MOSI = 35;
+      const int SD_CLK = 36;
+      const int SD_CS = 47;
+
+      const int IMU_CS = 34;
+
+      #if HAS_NP == false
+        #if defined(EXTERNAL_LEDS)
+          const int pin_led_rx = 43;
+          const int pin_led_tx = 43;
+        #else
+          const int pin_led_rx = 43;
+          const int pin_led_tx = 43;
+        #endif
+      #endif
+
     #else
       #error An unsupported ESP32 board was selected. Cannot compile RNode firmware.
     #endif