mirror of
https://github.com/tillitis/tillitis-key1.git
synced 2024-12-26 16:09:42 -05:00
31 lines
864 B
Markdown
31 lines
864 B
Markdown
# CH552 USB-to-Serial firmware
|
|
|
|
## Toolchain setup
|
|
|
|
SDCC:
|
|
|
|
sudo apt install build-essential sdcc
|
|
|
|
chprog (for flashing the firmware to a device):
|
|
|
|
cd ~
|
|
sudo apt install libusb-1.0-0-dev
|
|
git clone https://github.com/ole00/chprog.git
|
|
cd chprog
|
|
./build_linux.sh
|
|
sudo cp chprog /usr/local/bin
|
|
|
|
## Usage
|
|
|
|
Build the firmware using a default serial number:
|
|
|
|
make
|
|
|
|
Flash the firmware to a device:
|
|
|
|
make flash_patched
|
|
|
|
## Re-programming the firmware
|
|
|
|
By design, once the USB to serial firmware is loaded onto the chip, there isn't an intended way to reflash it using only software. However, if 3.3V is applied to the D+ line through a 10K resistor during power-up, then the CH552 will enter bootloader mode, and a new firmware can be programmed onto the chip. Note that the CH552 flash is only guaranteed for a few hundred flash cycles.
|