Jared Boone
5469a3a31d
Get ui::Console to a working state.
2015-11-06 09:39:59 -08:00
Jared Boone
8f7e26b5c1
Break out BasebandStatsView, add main, RSSI threads.
2015-10-14 10:59:32 -07:00
furrtek
ff96464efe
Added AFSK BW and repeat parameters
2015-09-16 15:43:43 +02:00
furrtek
00ee78f533
Play dead init
2015-09-15 22:34:36 +02:00
furrtek
9a7657fb38
Play dead actually works, fixed 7bit AFSK, AFSK repeat, started whistle mode
2015-09-10 20:36:39 +02:00
furrtek
f1166205b0
Checkboxes, more AFSK options
2015-09-05 20:17:43 +02:00
furrtek
30531a20f2
Splash screen and Play Dead functionality
2015-09-04 20:37:27 +02:00
furrtek
ec26f587f1
Started adding AFSK modulator options, cleaning up LCR TX
2015-09-03 06:34:00 +02:00
Jared Boone
aa733b1b61
Remove FSK from receiver menu. It doesn't do anything (yet).
2015-09-02 18:55:00 -07:00
Jared Boone
f91f17b9fb
Increase touch sensitivity a bit.
2015-09-02 18:48:51 -07:00
Jared Boone
9a3454d695
Touch code cleanup, stop scanning when no touch.
...
No need to change voltages on touch panel when no touch is detected. This should reduce noise a bit.
2015-09-02 18:48:38 -07:00
Jared Boone
f1ca3fe5bb
Switch RFFC5072, MAX2837 back to 40MHz reference.
...
Turns out the MAX2837 can't tune the necessary range when given a 50MHz reference. Oops.
2015-09-02 17:45:19 -07:00
Jared Boone
687e627dae
Mechanism to clear waterfall when switching modulations.
2015-09-01 21:04:27 -07:00
Jared Boone
d4c85bd786
Move receiver "back" button to separate row.
2015-09-01 20:38:59 -07:00
Jared Boone
24e398ca62
Add HackRF mode explanation text.
2015-09-01 20:23:11 -07:00
furrtek
0e0261f813
LCR in TEDI 1200/2400 AFSK transmit
2015-08-28 20:50:42 +02:00
Jared Boone
b13081696d
Simplify MessageQueue pop() usage.
2015-08-27 14:35:17 -07:00
Jared Boone
d8b3b4cb6b
Check queue empty only once when reading messages.
...
There was a second is_empty() call hidden in the pop() call, so the while(condition) was redundant.
2015-08-27 14:27:29 -07:00
Jared Boone
5d9079f87f
Stop streaming when changing baseband configuration.
...
Without, the baseband would get confused.
2015-08-27 14:07:15 -07:00
Jared Boone
e751e10e45
Add wideband spectrum processor.
2015-08-27 13:57:31 -07:00
Jared Boone
4974774f82
Simplify PLL math when correcting for PPM.
2015-08-25 17:56:03 -07:00
Jared Boone
98773cb62a
Make GIT_REVISION value available within code.
...
Addresses issue #59 .
No idea what it'll do if the commit is also tagged as a release...
2015-08-25 16:33:52 -07:00
Jared Boone
8f326e2d8e
Use PPB correction to adjust clock generator XTAL PLLA frequency.
...
Addresses issue #40 .
2015-08-24 12:11:33 -07:00
Jared Boone
fe7dcdc613
Function to adjust clock generator XTAL PLL frequency.
...
Needed to switch PLLA to operate in fractional mode.
2015-08-24 12:09:11 -07:00
furrtek
8e0210f944
Savestate ! RDS (only PSN) tx
2015-08-23 05:08:38 +02:00
Jared Boone
11561659b4
Reset the M0 after the M4 is running HackRF firmware.
2015-08-20 20:26:36 -07:00
Jared Boone
690c3c98db
Add Shutdown message, plumbing to send and handle.
2015-08-20 18:03:49 -07:00
Jared Boone
2efbd337bd
Provide a way to exit application event loop.
2015-08-20 17:56:47 -07:00
Jared Boone
1c3e45917c
Rework to make use of declared memory map regions.
2015-08-20 17:11:08 -07:00
Jared Boone
4126f1ab1f
Change IPC to exchange data, not pointers.
2015-08-20 13:13:12 -07:00
Jared Boone
f99016d78f
Tweak cast to C++ style.
2015-08-15 15:40:55 -07:00
Clayton Smith
25c2e612c0
Fix a narrowing conversion warning.
2015-08-15 17:56:30 -04:00
Jared Boone
f2cabadf60
Review application initialization order.
...
Group related things together.
2015-08-14 22:28:28 -07:00
Jared Boone
49b91d9c5d
Move event loop into EventDispatcher.
2015-08-14 22:01:20 -07:00
Jared Boone
d5ebb9ef1e
Remove more dead code and comments.
2015-08-14 21:58:54 -07:00
Jared Boone
aa801ada60
Move code comments to project Wiki.
2015-08-14 21:54:03 -07:00
Jared Boone
b1a4418f06
Push more widget painting code into ui::Painter
...
Hide knowledge of damage tracking strategy.
2015-08-14 21:36:51 -07:00
Jared Boone
2ebb41c0e6
Remove dead, commented code.
2015-08-14 21:35:48 -07:00
Jared Boone
872c998ff1
Move widget tree painting to ui::Painter.
...
Still doesn't seem like the right place, but better than the event dispatcher!
2015-08-14 21:27:46 -07:00
Jared Boone
a9bb7c96e5
Move UI dirty tracking out of application main.cpp.
2015-08-14 21:17:23 -07:00
Jared Boone
fa465c14c4
Extract RTC interrupt handler into separate files.
2015-08-14 20:57:40 -07:00
Jared Boone
32312a6cfb
Can't use context() in ui::Widget constructor, move use elsewhere.
...
TODO: Seems like a design flaw to me... Either eliminate need for context(), or pass into constructors.
2015-08-14 17:52:29 -07:00
Jared Boone
a7226820d0
Hide implementation of MessageHandlerMap.
2015-08-14 17:31:23 -07:00
Jared Boone
2aa8ae0d1f
Move FSKPacket message handler to ReceiverView.
2015-08-14 16:46:32 -07:00
Jared Boone
c44357a16a
Remove dead, commented-out code.
2015-08-14 16:38:10 -07:00
Jared Boone
02aab9b4e2
Application main() refactoring to group relevant bits.
2015-08-14 15:52:11 -07:00
Jared Boone
1713c82841
Move ChibiOS init comments into Wiki.
2015-08-14 12:23:49 -07:00
Jared Boone
d855336985
Persist tuned frequency.
...
w00t!
2015-08-04 10:31:03 -07:00
Jared Boone
45d26abf10
Use correct memory region for persistent storage.
...
Turns out 0x10088000 - 0x10089fff is not the right place. It's 0x40041000, and is only 256 bytes!
Move PPM to correct place, change representation to PPB for finer control.
Reset PPB value to initial value if read value out of bounds.
Clip PPB value on write to permitted bounds.
Contributes to resolution of issue #11 .
2015-08-04 10:03:18 -07:00
Jared Boone
985cbb874c
Change default receiver frequency.
...
Remove comments.
2015-08-02 09:38:49 -07:00
Jared Boone
ddcb705a1e
Default LNA to off.
2015-08-02 09:37:42 -07:00
Jared Boone
b70f1d9506
Move RSSI/baseband/audio bars to receiver mode.
...
Addresses issue #38 .
Side effects: more room in receiver for fields and data. More room for global status indications in full bar of SystemStatusView.
2015-08-01 18:07:09 -07:00
Jared Boone
30d249df26
Remove dead code.
2015-08-01 15:20:44 -07:00
Jared Boone
e6a3cba14e
Move HackRF firmware launch out of portapack::shutdown
2015-08-01 14:43:48 -07:00
Jared Boone
96babc3e84
Shut down LCD during PortaPack shutdown.
2015-08-01 14:40:05 -07:00
Jared Boone
b5802aadda
Clean up HackRF firmware mode message.
2015-08-01 14:32:22 -07:00
Jared Boone
65d5f68bfb
Move LCD display object to portapack namespace.
...
Globals are bad... Except in embedded development!
2015-08-01 14:31:51 -07:00
Jared Boone
fecbb7205e
Menu item to launch HackRF firmware.
2015-08-01 13:46:15 -07:00
Jared Boone
8797aa9758
Stop audio PLL if shutting down GP_CLKIN clock source.
2015-08-01 13:45:52 -07:00
Jared Boone
bfc73a6675
Move update_peripheral_clocks
...
Incorrect order of operations would hang execution if switching to IRC.
2015-08-01 13:44:52 -07:00
Jared Boone
c025a2bba2
Code to shut down ClockManager-controlled devices.
2015-08-01 13:43:58 -07:00
Jared Boone
1d16cd8aac
Consolidate peripheral declarations.
2015-08-01 13:42:27 -07:00
Jared Boone
b32f5e2239
Generalize method for executing SPI flash image in M4 RAM.
2015-07-30 09:41:33 -07:00
Jared Boone
d4c43044e0
Shuffle binaries in SPI flash image to insert HackRF firmware binary.
...
Bootstrap is now 64k @ 0x00000.
HackRF image is 64k @ 0x10000.
Baseband image is 128k @ 0x20000.
Application image is remainder of SPI flash, @ 0x40000.
2015-07-29 22:30:16 -07:00
Jared Boone
accf934a45
Remove vregmode debug field in receiver.
...
Resolves issue #37 .
2015-07-29 16:19:18 -07:00
Jared Boone
67976b73ba
UI plumbing for PPM adjust in receiver frequency options.
2015-07-29 16:09:00 -07:00
Jared Boone
9db54276c1
Expose reference PPM correction property on receiver model.
2015-07-29 15:59:05 -07:00
Clayton Smith
fd9bb13157
Add frequency correction to receiver screen (WIP).
2015-07-29 14:26:40 -07:00
Clayton Smith
3874c82d57
Store PPM in shared memory for now.
2015-07-29 14:26:40 -07:00
Clayton Smith
9dd41ed48d
Add frequency correction (WIP).
2015-07-29 14:26:39 -07:00
Jared Boone
9a8552eaeb
Draw spectrum frequency axis tick marks and labels.
...
Also removed horizontal separator bar, narrowed filter range band.
2015-07-20 21:55:51 -07:00
Jared Boone
6f2cbd1ac5
Partial refactor of channel filter frequency code.
...
Move channel filter frequency determination to baseband side, where the filtering is determined and performed.
Add useful accessor methods to BlockDecimator.
2015-07-18 16:49:40 -07:00
Jared Boone
ffc50785b7
specan: cleared up terminology, accounted for decimation.
...
Channel spectrum decimation now accounted for when computing filter frequencies.
Renamed a bunch of variables relating to channel spectrum bandwidth and filter frequencies.
2015-07-18 16:48:19 -07:00
Jared Boone
98bd9c54e4
Rework how spectrum and filter bandwidth is represented to UI.
...
Issue #13 .
2015-07-18 16:46:59 -07:00
Jared Boone
e571ca7f1c
Change reference initializations errors in GCC 4.8
...
Resolves issue #12 .
2015-07-17 12:07:38 -07:00
Jared Boone
92ba4d7fea
Fix line endings.
...
Addresses #21 .
2015-07-17 10:55:54 -07:00
Jared Boone
154b40d3c9
Extract baseband stats into separate widget
...
Also removed baseband saturation indication on red (TX) LED. A saturation indicator needs to live somewhere else, and be thought out a bit more...
2015-07-09 11:53:10 -07:00
Jared Boone
7c9fc62f5e
Move halt indication code to common place.
2015-07-08 16:28:57 -07:00
Jared Boone
f360c01ff3
Unify duplicated code between touch_adc.cpp and rssi.cpp.
...
Also remove comments and dead code.
2015-07-08 16:00:18 -07:00
Jared Boone
dc6fee8370
Initial firmware commit.
2015-07-08 08:39:24 -07:00
