Commit Graph

1796 Commits

Author SHA1 Message Date
Maescool
920b98f7c9 Upstream merge to make new revision of PortaPack work (#206)
* Power: Turn off additional peripheral clock branches.

* Update schematic with new symbol table and KiCad standard symbols.
Fix up wires.

* Schematic: Update power net labels.

* Schematic: Update footprint names to match library changes.

* Schematic: Update header vendor and part numbers.

* Schematic: Specify (arbitrary) value for PDN# net.

* Schematic: Remove fourth fiducial. Not standard practice, and was taking up valuable board space.

* Schematic: Add reference oscillator -- options for clipped sine or HCMOS output.

* Schematic: Update copyright year.

* Schematic: Remove CLKOUT to CPLD. It was a half-baked idea.

* Schematic: Add (experimental) GPS circuit.
Add note about charging circuit.
Update date and revision to match PCB.

* PCB: Update from schematic change: now revision 20180819.
Diff was extensive due to net renumbering...

* PCB: Fix GPS courtyard to accommodate crazy solder paste recommendation in integration manual.
PCB: Address DRC clearance violation between via and oscillator pad.

* PCB: Update copyright on drawing.

* Update schematic and PCB date and revision.

* gitignore: Sublime Text editor project/workspace files

* Power: Power up or power down peripheral clock at appropriate times, so firmware doesn't freeze...

* Clocking: Fix incorrect shift for CGU IDIVx_CTRL.PD field.

* LPC43xx: Add CGU IDIVx struct/union type.

* Power: Switch off unused IDIV dividers. Make note of active IDIVs and their use.

* HackRF Mode: Upgrade firmware to 2018.01.1 (API 1.02)

* MAX V CPLD: Refactor class to look more like Xilinx CoolRunner II CPLD class.

* MAX V CPLD: Add BYPASS, SAMPLE support.
Rename enter_isp -> enable, exit_isp -> disable.
Use SAMPLE at start of flash process, which somehow addresses the problem where CFM wouldn't load into SRAM (and become the active bitstream) after flashing.

* MAX V CPLD: Reverse verify data checking logic to make it a little faster.

* CPLD: After reprogramming flash, immediately clamp I/O signals, load to SRAM, and "execute" the new bitstream.

* Si5351: Refactor code, make one of the registers more type-safe.
Clock Manager: Track selected reference clock source for later use in user interface.

* Clock Manager: Add note about PPM only affecting Si5351C PLLA, which always runs from the HackRF 25MHz crystal.
It is assumed an external clock does not need adjustment, though I am open to being convinced otherwise...

* PPM UI: Show "EXT" when showing PPM adjustment and reference clock is external.

* CPLD: Add pins and logic for new PortaPack hardware feature(s).

* CPLD: Bitstream to support new hardware features.

* Clock Generator: Add a couple more setter methods for ClockControl registers.

* Clock Manager: Use shared MCU CLKIN clock control configuration constant.

* Clock Manager: Reduce MCU CLKIN driver current. 2mA should be plenty.

* Clock Manager: Remove redundant clock generator output enable.

* Bootstrap: Remove unnecessary ldscript hack to locate SPIFI mode change code in RAM.

* Bootstrap: Get CPU operating at max frequency as soon as possible.
Update SPIFI speed comment.
Make some more LPC43xx types into unions with uint32_t.

* Bootstrap: Explicitly configure IDIVB for SPIFI, despite LPC43xx bootloader setting it.

* Clock Manager: Init peripherals before CPLD reconfig. Do the clock generator setup after, so we can check presence of PortaPack reference clock with the help of the latest CPLD bitstream.

* Clock Manager: Reverse sense of conditional that determines crystal or non-crystal reference source. This is for an expected upcoming change where multiple external options can be differentiated.

* Bootstrap: Consolidate clock configuration, update SPIFI rate comment.

* Clock Manager: Use IDIVA for clock source for all peripherals, instead of PLL1. Should make switching easier going forward.
Don't use IRC as clock during initial clock manager configuration. Until we switch to GP_CLKIN, we should go flat out...

* ChibiOS M0: Change default clock speed to 204MHz, since bootstrap now maxes out clock speed before starting M0 execution.

* PortaPack IO: Expose method to set reference oscillator enable pin.

* Pin configuration: Do SPIFI pin config with other pins, in preparation for eliminating separate bootloader.

* Pin configuration: Disable input buffers on pins that are never read.

* Revert "ChibiOS M0: Change default clock speed to 204MHz, since bootstrap now maxes out clock speed before starting M0 execution."

This reverts commit c0e2bb6cc4cc656769323bdbb8ee5a16d2d5bb03.

* Remove unused board files.

* Add LPC43xx functions.

* chibios: Replace code with per-peripheral structs defining clocks, interrupts, and reset bits.

* LPC43xx: Add MCPWM peripheral struct.

* clock generator: Use recommended PLL reset register value.

Datasheet recommends a value. AN619 is quiet on the topic, claims the low nibble is default 0b0000.

* GPIO: Tweak masking of SCU function.

I don't remember why I thought this was necessary...

* HAL: Explicitly turn on timer peripheral clocks used as systicks, during init.

* SCU: Add struct to hold pin configuration.

* PAL: Add functions to address The Glitch.

https://greatscottgadgets.com/2018/02-28-we-fixed-the-glitch/

* PAL/board: New IO initialization code

Declare initial state for SCU pin config, GPIOs. Apply initial state during PAL init. Perform VAA slow turn-on to address The Glitch.

* Merge M0 and M4 to eliminate need for bootstrap firmware

During _early_init, detect if we're running on the M4 or M0.
If M4: do M4-specific core initialization, reset peripherals, speed up SPIFI clock, start M0, go to sleep.
If M0: do all the other things.

* Pins: Miscellaneous SCU configuration tweaks.

* Little code clarity improvement.

* bootstrap: Remove, not necessary.

* Clock Manager: Large re-working to support external references.

* Fix merge conflicts
2019-01-11 06:56:21 +00:00
furrtek
bbb5dc3c12 Merge branch 'master' of https://github.com/furrtek/portapack-havoc 2018-12-18 16:25:43 +00:00
furrtek
1d13389b5a Bias-T now works in capture mode
Simplified soundboard app, still some work to do
Merge remote-tracking branch 'upstream/master'
2018-12-18 16:25:21 +00:00
NotPike
4d98491448 Update README.md (#197)
Spelling. :D
2018-08-22 00:57:02 +01:00
Jared Boone
8feb79c710 Constrain enum type to address warning about underlying type conversion. 2018-08-05 15:17:48 -07:00
Jared Boone
f08e80e156 Application: Fix uninitalized fmt_pcm_t field warning 2018-08-05 15:07:12 -07:00
Jared Boone
17e5f6a1d7 ChibiOS/CMSIS: Patch to address C++1z warnings about "register" keyword. 2018-08-05 15:00:45 -07:00
Jared Boone
01bad2805c Merge branch 'external_clock' 2018-08-05 14:12:12 -07:00
Jared Boone
5fc1bde6bd CMake: Switch to C++17, because it's 2018, and I'm a modern man. 2018-08-05 14:11:08 -07:00
Jared Boone
88afee26d7 Clock Manager: Detect Si5351 CLKIN present, measure frequency, and use if approximately 10MHz. 2018-08-05 14:06:57 -07:00
Jared Boone
30f2bc4149 Clock Manager: Add API to measure LPC43xx clock inputs against IRC oscillator. 2018-08-05 14:06:45 -07:00
Jared Boone
804ebd25aa PortaPack H1 case updated for four-hole design, new vendor. 2018-06-22 17:29:38 -07:00
Furrtek
d7ee7f97a4 Ext clock detect bugfix attempt 2018-06-15 03:16:24 +01:00
furrtek
a82dc19639 Merge branch 'master' of https://github.com/furrtek/portapack-havoc 2018-06-12 07:55:30 +01:00
furrtek
609235b19f Testing external clock detection and auto-switch
Simplified audio spectrum computation and transfer
ACARS RX in debug mode
Disabled ABI warnings
Updated binary
2018-06-12 07:55:12 +01:00
furrtek
dc5d6fef70 Started work on ACARS RX
Added ACARS frequencies file
Moved non-implemented apps menu items down
2018-06-10 10:15:43 +01:00
dhoetger
e978848c3a #183 disables PIL decompression bomb protection to allow large ADSB map to be sliced (#184) 2018-06-04 00:13:43 +01:00
furrtek
5c1ba9b90d Added cursor to audio spectrum view 2018-05-22 04:43:04 +01:00
furrtek
63c4a60cf7 Fixed scrolling/FFT view glitch when going back to analog audio rx 2018-05-21 20:56:04 +01:00
furrtek
0222b60b30 Updated freqman files and max entries per file 2018-05-21 19:10:39 +01:00
furrtek
b813b32593 Added an audio FFT view in Wideband FM receive
Tried speeding up fill_rectangle for clearing the waveform widget
2018-05-21 18:46:48 +01:00
furrtek
b11c3c94b6 Added tone key mix ratio in Settings -> Audio
Renamed Setup to Settings
Updated binary
2018-05-16 09:45:13 +01:00
furrtek
96828262d7 SD card files cleanup 2018-05-15 23:47:08 +01:00
furrtek
86a2790716 Removed numbers station samples 2018-05-15 23:37:26 +01:00
furrtek
b29c1d9749 Finally found what was eating all the RAM :D
Re-enabled the tone key selector in Soundboard
Soundboard now uses OutputStream, like Replay
Constexpr'd a bunch of consts which were going to BSS section
Exiting an app now goes back to main menu
Cleaned up Message array
2018-05-15 23:35:30 +01:00
NotPike
2d3a6313cc Touchtunes Update (#173)
* Update ui_touchtunes.hpp

* Update ui_touchtunes.cpp
2018-04-25 07:19:35 +01:00
furrtek
3ddc6553ac Beta scanner app
ADSB TX frame index bugfix (OOB)
2018-04-19 20:50:32 +01:00
furrtek
5636764226 Added channel centering cursor in waterfall view
Added more samplerate choices in capture
Updated binary
2018-04-18 22:44:41 +01:00
furrtek
d0ce9610b5 Added some skeletons
Renamed "Scanner" to "Search"
Modified splash bitmap
Disabled Nuoptix TX
2018-03-27 12:52:07 +01:00
furrtek
8573f760be Added basic APRS transmit
Added goertzel algo
Updated binary
2018-02-23 20:21:24 +00:00
furrtek
7fd987a2b4 Added support for multiple sample rates in IQ record
Support for any sample rate <= 500k in IQ replay
Fixed bias-t power not activating in TX
Removed RSSI pitch output option (awful code)
Udated binary
2018-02-22 07:04:19 +00:00
Jared Boone
2121d1ef5c
Merge pull request #119 from RndmNmbr/patch-1
Update ui_widget.hpp
2018-02-03 11:16:23 -08:00
Jared Boone
b3cf24a575
Merge pull request #101 from dodgymike/master
Minor syntax error in the README file
2018-02-03 11:13:58 -08:00
RndmNmbr
36e5682406
Update ui_widget.hpp
Added include of <functional> to allow for a clean build with g++ 7.2.1 20170904
2018-02-03 13:41:40 -05:00
furrtek
57c759627d Fixed mic tx not working the first time it was entered
Fixed SD card FAT wipe (buffer size too big)
Cleared some warnings from ADSB rx
Updated binary
2018-02-01 11:17:51 +00:00
furrtek
441a266dc4 Added back scanning in BHT TX
Added file creation date display in File Manager
2018-01-09 21:12:19 +00:00
furrtek
aebd1757da Replay app loads original record frequency if available
Updated binary
2018-01-08 05:32:49 +00:00
ImDroided
444bfa1578 Added some more freq files (#152)
* Added Hampton Bay fan on and off.

* Add Chicago Police citywide freqs

* Add NOAA Weather Radio Frequencies

* Add CB channels 1-20

Credit to Pyr3x for this one

* Rename sdcard/NOAAWEATHER.TXT to sdcard/FREQMAN/NOAAWEATHER.TXT

Oops

* Update NOAAWEATHER.TXT

* Add CB channels 21-40

Credit to unixpunk for this file
2018-01-08 03:58:10 +00:00
furrtek
8f9c75d62e Merge branch 'master' of https://github.com/furrtek/portapack-havoc 2018-01-08 04:27:32 +00:00
furrtek
d6afd84c66 File load path bugfix 2018-01-08 04:27:16 +00:00
furrtek
d2ea631fe7 Merge branch 'master' of https://github.com/furrtek/portapack-havoc 2018-01-08 03:48:23 +00:00
furrtek
f0c912be2e Added Bias-T toggle confirmation
Backlight setting save bugfix
Updated binary
2018-01-08 03:47:37 +00:00
Furrtek
7acd8c1aaa
Update README.md 2018-01-08 03:09:51 +00:00
furrtek
3193c6ee99 Added bias-T status icon
Merged radio settings in one screen
2018-01-07 23:13:08 +00:00
ImDroided
587ef522f3 merge (#150)
* Added Hampton Bay fan on and off.

* Add Chicago Police citywide freqs

* Add NOAA Weather Radio Frequencies
2018-01-07 22:47:57 +00:00
Furrtek
8b9ecda1a0 Oops 0:) 2017-12-12 20:49:07 +01:00
Furrtek
951d3d8860 Updated and split Frequency files 2017-12-12 20:47:51 +01:00
furrtek
c9381f1418 Added loop option in Replay app
Updated binary
2017-12-11 04:14:54 +00:00
furrtek
70c7646743 Capped max entries per Freqman file to 30 due to RAM issue
Capped max files in Soundboard to 54 and removed CTCSS options due to
same issue
Splitted files for jammer ranges
Bugfix: Mismatch between filename and category name in Freqman
Bugfix: Freqman file parsing strstr()'s might have gone out of buffer
Updated binary
2017-12-11 02:40:43 +00:00
furrtek
2d01822cdb MenuView bugfix (again)
Updated binary
2017-12-10 03:34:11 +00:00