Commit Graph

148 Commits

Author SHA1 Message Date
furrtek
6e7b2c751f Added wav file viewer
Fileman open now allows going into subdirectories
Updated binary
2017-10-15 15:53:40 +01:00
furrtek
950bc2b1d2 AFSK RX works (only Bell202 for now)
AFSK RX always logs to file
Removed frequency and bw settings from modem setup view
Updated binary
Bugfix: Binary display shifted one bit
Bugfix: Frequency manager views freezing if SD card not present
Bugfix: Menuview blinking arrow not showing up at the right position
Bugfix: Freeze if console written to while it's hidden
Broken: LCR TX, needs UI update
2017-09-02 08:28:29 +01:00
furrtek
160359166a Added tabs to RDS tx app
Fixed callsign not updating in ADSB tx
2017-08-16 07:46:28 +01:00
furrtek
728bb64543 BW setting in TX view should now be used everywhere
Jammer center and width value editing bugfix
2017-08-12 19:28:57 +01:00
furrtek
81eb96f870 Updated firmware binary 2017-08-12 17:51:52 +01:00
furrtek
7f97a090e4 Fixed ADSB TX frame rotation 2017-08-12 09:54:58 +01:00
furrtek
fba5b507ad Made a GeoPos widget for lon/lat/alt entry and display (APRS...)
Cleaned up the GeoMap view, can be used as input
2017-08-03 19:06:59 +01:00
furrtek
0cbf9cd386 Added velocity/bearing ADS-B frame for tx
Added compass widget
Manchester encoder
2017-07-25 08:30:12 +01:00
furrtek
5a67a7080a ADS-B TX works well enough for dump1090 and gr-air-modes
Hooked ADS-B RX to baseband instead of debug IQ file, not tested
2017-07-23 12:20:32 +01:00
furrtek
b57b41753f Added map display view (GeoMapView)
SigGen duration bugfix
2017-07-22 19:30:20 +01:00
furrtek
46515ebb05 Replay buffer size and samplerate adjustment 2017-06-24 18:42:41 +01:00
furrtek
33a2df9d2a OutputStream (file M0 -> M4 radio) now works
Disabled numbers station for now (too buggy, low priority)
2017-06-23 08:40:22 +01:00
furrtek
abd154b3c7 Merge remote-tracking branch 'upstream/master'
Base class for text entry
2017-06-21 03:25:27 +01:00
Jared Boone
748e5a4f5f Init: Boot to HackRF mode if PortaPack CPLD not found.
Worst case, customers can always pull off the PortaPack to get back to a working HackRF.
2017-06-13 22:16:00 -07:00
furrtek
61be221432 Frequency manager lists
Scanner approximately 6.3% less buggy with wide ranges
2017-06-12 03:55:36 +01:00
furrtek
8e99bccd41 Started work on APRS (AX25) 2017-05-25 21:08:33 +01:00
furrtek
38e14b1e30 Scanner: Added last locked frequencies list
Added back squelch to NFM receiver
Scanner: cleanup
Widgets: VU-meter cleanup
2017-05-18 11:06:11 +01:00
furrtek
bebec9ccf7 More ADS-B TX experimentation
Lots of junk added in Numbers Station regarding voice files
Removed warnings caused by unfinished ADS-B function
2017-05-01 10:42:09 +01:00
Jared Boone
17ba51d7eb Move PortaPack IO init to earlier -- with other IO init.
Was causing trouble with performing audio codec reset.
2017-05-01 10:33:16 +01:00
furrtek
8c680ff893 Simplified LCR code a bit
Split modem into modem and serializer
Frequency string formatter
2017-04-24 18:15:57 +01:00
furrtek
40b49e2072 POCSAG address filter now ignores alpha messages
Experimenting with FIFOs for replay...
2017-04-19 22:05:16 +01:00
furrtek
fbc054ca75 Coaster pager address scan
Merged tone setups
2017-04-11 08:42:31 +01:00
furrtek
b61869f1c0 Started adding coaster pager/EZRadioPro TX
BHT XY TX sequencer
2017-04-07 06:20:24 +01:00
furrtek
685e4c6e4b Added more SSTV modes
A bit more work done on Replay (still not enabled)
2017-03-23 21:28:21 +00:00
furrtek
6a0bcb9cca SSTV transmit beta (320x256 24bpp Scottie 2 only) 2017-03-23 04:29:58 +00:00
furrtek
16acb9db28 Added roger beep option in mic TX 2017-03-14 08:20:13 +00:00
furrtek
69b0ef9a40 Microphone tx is mostly working, Voice activation, PTT, CTCSS...
Transmit bandwidth bugfix
TX LED is now only lit when using rf amp
VU-meter widget
Added gain parameter for baseband audio TX
2017-03-13 04:09:21 +00:00
furrtek
0ba05fea5e Morse special chars and tx duration indication 2017-02-15 04:27:51 +00:00
furrtek
0642c57041 Utility: CW generator 2017-02-15 03:05:38 +00:00
furrtek
6c86ad1b72 Morse TX foxhunt codes are working 2017-02-13 23:24:42 +00:00
furrtek
d12cd0d8af "Labels" widget 2017-02-12 07:23:31 +00:00
furrtek
3efffca1b7 Save before cleanup 2017-02-11 22:17:02 +00:00
furrtek
c72b490d49 Encoders, Nuoptix DTMF and RDS transmitters now use TransmitterView
Bigger buttons in AlphanumView, 3 pages
Scary yellow stripes around TransmitterView
2017-02-07 22:12:20 +00:00
furrtek
dc7fcbc6c3 POCSAG TX (with fixed message for testing) 2017-02-07 17:48:17 +00:00
furrtek
98f89a84bb Improved POCSAG receiver reliability 2017-02-05 20:57:20 +00:00
furrtek
84be3a363c Added categories for Frequency Manager
Very bad memory leak fix in MenuView
2017-02-03 15:10:27 +00:00
furrtek
c352458114 Jammer manual set range 2 & 3 bugfix
Menu capture/replay confusion bugfix
2017-02-03 06:26:42 +00:00
furrtek
394331ebd2 POCSAG RX now runs at 3.072MHz, like NFM audio 2017-02-01 11:40:01 +00:00
furrtek
064e097bc3 Symfield widget auto-inits
ADS-B emergency frame
2017-02-01 00:21:13 +00:00
furrtek
688a012443 Transmitter config widget
Frequency manager duplicate alert
Tone sets
2017-01-30 13:10:30 +00:00
furrtek
693a2533b5 Reverted to original CPLD data 2017-01-29 06:50:48 +00:00
furrtek
f0fbc356ad Jammer bugfix: now produces all the right channels 2017-01-17 14:27:37 +00:00
furrtek
7cb38f858e Udpdated jammer baseband code, should work again 2017-01-17 08:42:35 +00:00
furrtek
b10c88e271 POCSAG bitrate selection and logging toggle
Small checkboxes
2017-01-16 13:36:28 +00:00
furrtek
12aeae3a82 Commit replay stuff before sync 2017-01-10 19:45:40 +00:00
furrtek
3ec725c172 Added SD card wiper tool
Frequency manager now creates FREQMAN.TXT if not found
Moved graphics files
2017-01-10 18:40:33 +00:00
furrtek
a0c248d567 Added waveform widget and a frequency field in encoders tx 2017-01-09 02:45:29 +00:00
furrtek
c0909fa298 Pretty icons 2016-12-26 20:33:38 +01:00
furrtek
1e34a48be9 Fixed proc_tones skipping last tone
Split ui_bht to bht
2016-12-26 16:15:54 +01:00
furrtek
f033782d4b Playdead default sequence and validity check 2016-12-26 13:49:23 +01:00