furrtek
abd154b3c7
Merge remote-tracking branch 'upstream/master'
...
Base class for text entry
2017-06-21 03:25:27 +01:00
Jared Boone
748e5a4f5f
Init: Boot to HackRF mode if PortaPack CPLD not found.
...
Worst case, customers can always pull off the PortaPack to get back to a working HackRF.
2017-06-13 22:16:00 -07:00
furrtek
61be221432
Frequency manager lists
...
Scanner approximately 6.3% less buggy with wide ranges
2017-06-12 03:55:36 +01:00
furrtek
8e99bccd41
Started work on APRS (AX25)
2017-05-25 21:08:33 +01:00
furrtek
38e14b1e30
Scanner: Added last locked frequencies list
...
Added back squelch to NFM receiver
Scanner: cleanup
Widgets: VU-meter cleanup
2017-05-18 11:06:11 +01:00
furrtek
bebec9ccf7
More ADS-B TX experimentation
...
Lots of junk added in Numbers Station regarding voice files
Removed warnings caused by unfinished ADS-B function
2017-05-01 10:42:09 +01:00
Jared Boone
17ba51d7eb
Move PortaPack IO init to earlier -- with other IO init.
...
Was causing trouble with performing audio codec reset.
2017-05-01 10:33:16 +01:00
furrtek
8c680ff893
Simplified LCR code a bit
...
Split modem into modem and serializer
Frequency string formatter
2017-04-24 18:15:57 +01:00
furrtek
40b49e2072
POCSAG address filter now ignores alpha messages
...
Experimenting with FIFOs for replay...
2017-04-19 22:05:16 +01:00
furrtek
fbc054ca75
Coaster pager address scan
...
Merged tone setups
2017-04-11 08:42:31 +01:00
furrtek
b61869f1c0
Started adding coaster pager/EZRadioPro TX
...
BHT XY TX sequencer
2017-04-07 06:20:24 +01:00
furrtek
685e4c6e4b
Added more SSTV modes
...
A bit more work done on Replay (still not enabled)
2017-03-23 21:28:21 +00:00
furrtek
6a0bcb9cca
SSTV transmit beta (320x256 24bpp Scottie 2 only)
2017-03-23 04:29:58 +00:00
furrtek
16acb9db28
Added roger beep option in mic TX
2017-03-14 08:20:13 +00:00
furrtek
69b0ef9a40
Microphone tx is mostly working, Voice activation, PTT, CTCSS...
...
Transmit bandwidth bugfix
TX LED is now only lit when using rf amp
VU-meter widget
Added gain parameter for baseband audio TX
2017-03-13 04:09:21 +00:00
furrtek
0ba05fea5e
Morse special chars and tx duration indication
2017-02-15 04:27:51 +00:00
furrtek
0642c57041
Utility: CW generator
2017-02-15 03:05:38 +00:00
furrtek
6c86ad1b72
Morse TX foxhunt codes are working
2017-02-13 23:24:42 +00:00
furrtek
d12cd0d8af
"Labels" widget
2017-02-12 07:23:31 +00:00
furrtek
3efffca1b7
Save before cleanup
2017-02-11 22:17:02 +00:00
furrtek
c72b490d49
Encoders, Nuoptix DTMF and RDS transmitters now use TransmitterView
...
Bigger buttons in AlphanumView, 3 pages
Scary yellow stripes around TransmitterView
2017-02-07 22:12:20 +00:00
furrtek
dc7fcbc6c3
POCSAG TX (with fixed message for testing)
2017-02-07 17:48:17 +00:00
furrtek
98f89a84bb
Improved POCSAG receiver reliability
2017-02-05 20:57:20 +00:00
furrtek
84be3a363c
Added categories for Frequency Manager
...
Very bad memory leak fix in MenuView
2017-02-03 15:10:27 +00:00
furrtek
c352458114
Jammer manual set range 2 & 3 bugfix
...
Menu capture/replay confusion bugfix
2017-02-03 06:26:42 +00:00
furrtek
394331ebd2
POCSAG RX now runs at 3.072MHz, like NFM audio
2017-02-01 11:40:01 +00:00
furrtek
064e097bc3
Symfield widget auto-inits
...
ADS-B emergency frame
2017-02-01 00:21:13 +00:00
furrtek
688a012443
Transmitter config widget
...
Frequency manager duplicate alert
Tone sets
2017-01-30 13:10:30 +00:00
furrtek
693a2533b5
Reverted to original CPLD data
2017-01-29 06:50:48 +00:00
furrtek
f0fbc356ad
Jammer bugfix: now produces all the right channels
2017-01-17 14:27:37 +00:00
furrtek
7cb38f858e
Udpdated jammer baseband code, should work again
2017-01-17 08:42:35 +00:00
furrtek
b10c88e271
POCSAG bitrate selection and logging toggle
...
Small checkboxes
2017-01-16 13:36:28 +00:00
furrtek
12aeae3a82
Commit replay stuff before sync
2017-01-10 19:45:40 +00:00
furrtek
3ec725c172
Added SD card wiper tool
...
Frequency manager now creates FREQMAN.TXT if not found
Moved graphics files
2017-01-10 18:40:33 +00:00
furrtek
a0c248d567
Added waveform widget and a frequency field in encoders tx
2017-01-09 02:45:29 +00:00
furrtek
c0909fa298
Pretty icons
2016-12-26 20:33:38 +01:00
furrtek
1e34a48be9
Fixed proc_tones skipping last tone
...
Split ui_bht to bht
2016-12-26 16:15:54 +01:00
furrtek
f033782d4b
Playdead default sequence and validity check
2016-12-26 13:49:23 +01:00
furrtek
7df5987b3b
Added utilities > Frequency manager + load/save
2016-12-26 01:31:38 +01:00
furrtek
9470028308
Fixed messup after last squashed commits
2016-12-24 16:54:44 +01:00
furrtek
6bcb7dc1b1
# This is a combination of 2 commits.
...
# The first commit's message is:
Updated RDS transmitter: flags, PI and date/time
Merging baseband audio tone generators
Merging DTMF baseband with "tones" baseband
Added stealth transmit mode
App flash section bumped to 512k
RX and TX LEDs are now used
Play dead should work again, added login option
Morse frame gen. for letters and fox hunt codes
Merged EPAR with Xylos
Made EPAR use encoders for frame gen.
Moved OOK encoders data in encoders.hpp
Simplified about screen, ui_about_demo.* files are still there
BHT city DB, keywords removed
BHT cities DB, keywords removed
Update README.md
RDS radiotext and time group generators
# This is the 2nd commit message:
Update README.md
2016-12-24 11:52:11 +01:00
furrtek
28ea2179f4
Re-enabled closecall even if it's still not working well
...
RDS PSN works again but update issue (UI ?)
Moved CTCSS stuff to dedicated file
2016-12-23 18:31:02 +01:00
furrtek
1db138c27a
Wavfile class
2016-12-23 18:31:02 +01:00
furrtek
e56fa0f479
Numbers station works, very basic
...
Added utilities, whip antenna length calculator
Modal errors/abort
2016-12-23 18:31:02 +01:00
furrtek
d18b6d135d
Restoring jammer and RDS functionalities, please wait...
...
Started work on frequency manager and numbers station simulator
2016-12-23 18:31:01 +01:00
furrtek
bb6eefe2be
Started ADS-B TX UI and frame encoding
2016-11-30 07:41:55 +01:00
furrtek
f7e0f36bd9
Added Soundboard
...
file.cpp: scan_root_files
proc_audiotx.cpp: bandwidth setting
ui_widget.cpp: button on_focus
2016-08-26 08:11:24 +02:00
furrtek
0a549c8192
Manual frequency input in POCSAG RX
...
Changed firmware file name
2016-08-23 11:27:10 +02:00
furrtek
38e506a108
OOK transmit is mostly working, bit durations are wrong
...
Simplified messages carrying data (uses shared_memory instead)
Added SymField widget (bitfield, symbol field...)
Added some space for baseband code
BMP palette loading bugfix
2016-08-06 08:49:45 +02:00
furrtek
e2218a0f32
More AFSK options, scan lists,
2016-08-02 12:44:31 +02:00
