onionshare/docs/source/locale/it/LC_MESSAGES/tor.po

# SOME DESCRIPTIVE TITLE.
# Copyright (C) Micah Lee, et al.
# This file is distributed under the same license as the OnionShare package.
# FIRST AUTHOR <EMAIL@ADDRESS>, 2020.
#
msgid ""
msgstr ""
"Project-Id-Version: OnionShare 2.3\n"
"Report-Msgid-Bugs-To: onionshare-dev@lists.riseup.net\n"
"POT-Creation-Date: 2022-07-04 17:16-0400\n"
"PO-Revision-Date: 2022-01-20 11:57+0000\n"
"Last-Translator: albanobattistella <albano_battistella@hotmail.com>\n"
"Language: it\n"
"Language-Team: it <LL@li.org>\n"
"Plural-Forms: nplurals=2; plural=n != 1;\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=utf-8\n"
"Content-Transfer-Encoding: 8bit\n"
"Generated-By: Babel 2.10.3\n"

#: ../../source/tor.rst:2
msgid "Connecting to Tor"
msgstr "Connessione a Tor in corso"

#: ../../source/tor.rst:4
msgid ""
"When OnionShare starts, it will show you a screen asking you to connect "
"to the Tor network."
msgstr ""

#: ../../source/tor.rst:8
msgid ""
"You can toggle on the switch \"Connect to Tor automatically\" before "
"clicking \"Connect to Tor\". This means that next time OnionShare starts,"
" it will automatically connect with its Tor connection settings from the "
"last session, instead of presenting you with the connection options. If "
"the connection fails, you can still try bridges or reconfigure Tor via "
"the \"Network Settings\" button."
msgstr ""

#: ../../source/tor.rst:11
msgid ""
"You can click \"Connect to Tor\" to begin the connection process. If "
"there are no problems with your network, including any attempts to block "
"your access to the Tor network, this should hopefully work the first "
"time."
msgstr ""

#: ../../source/tor.rst:13
msgid ""
"Or, if you want to manually configure Bridges or other Tor settings "
"before you connect, you can click \"Network Settings\"."
msgstr ""

#: ../../source/tor.rst:16
msgid "Automatic censorship circumvention"
msgstr ""

#: ../../source/tor.rst:18
msgid ""
"When you click \"Connect to Tor\", if OnionShare fails to connect, it "
"might be because Tor is censored in your country or on your local "
"network."
msgstr ""

#: ../../source/tor.rst:20
msgid "If this occurs, you will have these choices:"
msgstr ""

#: ../../source/tor.rst:22
msgid "Try again without a bridge"
msgstr ""

#: ../../source/tor.rst:23
msgid "Automatically determine my country from my IP address for bridge settings"
msgstr ""

#: ../../source/tor.rst:24
msgid "Manually select my country for bridge settings"
msgstr ""

#: ../../source/tor.rst:28
msgid ""
"If you choose the \"Try again without a bridge\" option, OnionShare will "
"retry connecting to Tor like normal, without attempting to bypass "
"censorship."
msgstr ""

#: ../../source/tor.rst:30
msgid ""
"The other two options will attempt to automatically bypass censorship "
"using Tor bridges. If your network provider is blocking access to the Tor"
" network, you can hopefully still connect to a Tor bridge, which will "
"then connect you to the Tor network, circumventing the censorship. Both "
"of these options use the Tor Project's Censorship Circumvention API to "
"provide you with bridge settings that should work for you. OnionShare "
"will temporarily use the `Meek "
"<https://gitlab.torproject.org/legacy/trac/-/wikis/doc/meek/>`_ domain-"
"fronting proxy to make a non-Tor connection from your computer to Tor's "
"Censorship Circumvention API. The Meek proxy hides the fact that you are "
"trying to find a way to connect to Tor."
msgstr ""

#: ../../source/tor.rst:36
msgid ""
"If you choose \"Automatically determine my country from my IP address for"
" bridge settings\", the Censorship Circumvention API will consider your "
"IP address (yes, your real IP address) to determine what country you "
"might reside in. Based on the country information, the API will try to "
"automatically find bridges that suit your location."
msgstr ""

#: ../../source/tor.rst:41
msgid ""
"If you choose \"Manually select my country for bridge settings\", the "
"Censorship API will find the bridges that suit the country that you "
"specified."
msgstr ""

#: ../../source/tor.rst:46
msgid "How automatic censorship circumvention works"
msgstr ""

#: ../../source/tor.rst:48
msgid ""
"If the Censorship Circumvention API finds bridges that it believes will "
"suit you, OnionShare will try to reconnect to Tor using those bridges. If"
" the API does not find any bridges for your location, OnionShare will ask"
" the API for \"fallback\" options, and then try to reconnect using those."
msgstr ""

#: ../../source/tor.rst:50
msgid ""
"If for some reason OnionShare fails to connect to the Censorship API "
"itself, or if the API returns an error message, OnionShare will attempt "
"to use the obfs4 built-in bridges."
msgstr ""

#: ../../source/tor.rst:52
msgid ""
"It's important to note that the requests to the Censorship Circumvention "
"API do not go over the Tor network (because if you could connect to Tor "
"already, you wouldn't need to connect to the API)."
msgstr ""

#: ../../source/tor.rst:54
msgid ""
"Even though it's hard for an adversary to discover where the Meek request"
" is going, this may still be risky for some users. Therefore, it is an "
"opt-in feature. The use of Meek and non-torified network requests are "
"limited only to making one or two requests to the Censorship "
"Circumvention API. Then Meek is stopped, and all further network requests"
" happen over the Tor network."
msgstr ""

#: ../../source/tor.rst:56
msgid ""
"If you are uncomfortable with making a request that doesn't go over the "
"Tor network, you can click \"Network Settings\" (or the Settings icon in "
"the bottom right corner, followed by the Tor Settings tab in the screen "
"that appears), and manually configure bridges. After you save any bridge "
"settings, OnionShare will try to reconnect using those bridges."
msgstr ""

#: ../../source/tor.rst:59
msgid "Manually configure Tor settings"
msgstr ""

#: ../../source/tor.rst:61
msgid ""
"You can get to the Tor settings by clicking \"Network Settings\" on the "
"welcome screen, or by clicking the \"⚙\" icon in the bottom-right corner "
"of the application, and then switch to the Tor Settings tab in the screen"
" that appears."
msgstr ""

#: ../../source/tor.rst:65
msgid ""
"Here are the different ways you can configure OnionShare to connect to "
"Tor:"
msgstr ""

#: ../../source/tor.rst:68
msgid "Use the Tor version built into OnionShare"
msgstr "Usa la versione Tor integrata in OnionShare"

#: ../../source/tor.rst:70
msgid ""
"This is the default, simplest and most reliable way that OnionShare "
"connects to Tor. For this reason, it's recommended for most users."
msgstr ""
"Questo è il modo predefinito, più semplice e affidabile in cui OnionShare"
" si connette a Tor. Per questo motivo, è consigliato per la maggior parte"
" degli utenti."

#: ../../source/tor.rst:73
msgid ""
"When you open OnionShare, it launches an already configured ``tor`` "
"process in the background for OnionShare to use. It doesn't interfere "
"with other ``tor`` processes on your computer, so you can use the Tor "
"Browser or the system ``tor`` on their own."
msgstr ""
"Quando apri OnionShare, si avvia un processo ``tor`` già configurato in "
"background da far utilizzare ad OnionShare. Non interferisce con altri "
"processi ``tor`` sul tuo computer, quindi puoi usare il Tor Browser o il "
"sistema ``tor`` da soli."

#: ../../source/tor.rst:76
msgid "**Using bridges**"
msgstr ""

#: ../../source/tor.rst:78
#, fuzzy
msgid ""
"To use a bridge, you must select \"Use the Tor version built into "
"OnionShare\" and check the \"Use a bridge\" checkbox."
msgstr ""
"Per utilizzare un bridge, apri la scheda Impostazioni Tor. Devi "
"selezionare \"Usa la versione Tor incorporata in OnionShare\" e "
"selezionare la casella \"Usa un bridge\"."

#: ../../source/tor.rst:80
msgid ""
"Try using a built-in bridge first. Using `obfs4` or `snowflake` bridges "
"is recommended over using `meek-azure`."
msgstr ""
"Prova prima a usare un bridge integrato. Si consiglia di utilizzare i "
"bridge `obfs4` o `snowflake` rispetto a `meek-azure`."

#: ../../source/tor.rst:84
msgid ""
"If using a built-in bridge doesn't work, you can request a bridge from "
"torproject.org. You will have to solve a CAPTCHA in order to request a "
"bridge. (This makes it more difficult for governments or ISPs to block "
"access to Tor bridges.)"
msgstr ""
"Se l'utilizzo di un bridge integrato non funziona, puoi richiedere un "
"bridge da torproject.org. Dovrai risolvere un CAPTCHA per richiedere un "
"bridge. (Ciò rende più difficile per i governi o gli ISP bloccare "
"l'accesso ai bridge Tor.)"

#: ../../source/tor.rst:88
msgid ""
"You also have the option of using a bridge that you learned about from a "
"trusted source."
msgstr ""
"Hai anche la possibilità di utilizzare un bridge che hai appreso da una "
"fonte attendibile."

#: ../../source/tor.rst:91
msgid "Attempt auto-configuration with Tor Browser"
msgstr "Tenta la configurazione automatica con il Browser Tor"

#: ../../source/tor.rst:93
msgid ""
"If you have `downloaded the Tor Browser <https://www.torproject.org>`_ "
"and don't want two ``tor`` processes running, you can use the ``tor`` "
"process from the Tor Browser. Keep in mind you need to keep Tor Browser "
"open in the background while you're using OnionShare for this to work."
msgstr ""
"Se hai `scaricato il Browser Tor <https://www.torproject.org/it/>`_ e non"
" vuoi che due processi ``tor`` siano in esecuzione, puoi usare il "
"processo `` tor`` dal Browser Tor. Tieni presente che devi tenere il "
"Browser Tor aperto in background mentre usi OnionShare affinché funzioni."

#: ../../source/tor.rst:97
msgid "Using a system ``tor`` in Windows"
msgstr "Utilizzando un sistema ``tor`` su Windows"

#: ../../source/tor.rst:99
msgid ""
"This is fairly advanced. You'll need to know how edit plaintext files and"
" do stuff as an administrator."
msgstr ""
"Questo è abbastanza avanzato. Avrai bisogno di sapere come modificare i "
"file di testo in chiaro e fare cose come amministratore."

#: ../../source/tor.rst:101
msgid ""
"Download the Tor Windows Expert Bundle `from "
"<https://www.torproject.org/download/tor/>`_. Extract the compressed file"
" and copy the extracted folder to ``C:\\Program Files (x86)\\`` Rename "
"the extracted folder with ``Data`` and ``Tor`` in it to ``tor-win32``."
msgstr ""
"Scarica il Tor Windows Expert Bundle `da "
"<https://www.torproject.org/download/tor/>`_. Estrai il file compresso e "
"copia la cartella estratta in ``C:\\Program Files (x86)\\`` Rinomina le "
"cartella all'interno che hanno il nome ``Data`` e ``Tor`` in ``tor-"
"win32``."

#: ../../source/tor.rst:105
msgid ""
"Make up a control port password. (Using 7 words in a sequence like "
"``comprised stumble rummage work avenging construct volatile`` is a good "
"idea for a password.) Now open a command prompt (``cmd``) as an "
"administrator, and use ``tor.exe --hash-password`` to generate a hash of "
"your password. For example::"
msgstr ""
"Crea una password per la porta di controllo. (Usare 7 parole in una "
"sequenza come ``comprised stumble rummage work avenging construct "
"volatile`` è una buona idea per una password.) Ora apri un prompt dei "
"comandi (``cmd``) come amministratore e usa ``tor. exe --hash-password`` "
"per generare un hash della tua password. Per esempio::"

#: ../../source/tor.rst:112
msgid ""
"The hashed password output is displayed after some warnings (which you "
"can ignore). In the case of the above example, it is "
"``16:00322E903D96DE986058BB9ABDA91E010D7A863768635AC38E213FDBEF``."
msgstr ""
"L'output della password con l'hash viene visualizzato dopo alcuni avvisi "
"(che è possibile ignorare). Nel caso dell'esempio precedente, è "
"``16:00322E903D96DE986058BB9ABDA91E010D7A863768635AC38E213FDBEF``."

#: ../../source/tor.rst:114
msgid ""
"Now create a new text file at ``C:\\Program Files (x86)\\tor-"
"win32\\torrc`` and put your hashed password output in it, replacing the "
"``HashedControlPassword`` with the one you just generated::"
msgstr ""
"Ora crea un nuovo file di testo in ``C:\\Programmi(x86)\\tor-win32\\torrc"
" '' e inseriscici l'output della password con l'hash, sostituendo "
"``HashedControlPassword`` con quello appena generato:"

#: ../../source/tor.rst:119
msgid ""
"In your administrator command prompt, install ``tor`` as a service using "
"the appropriate ``torrc`` file you just created (as described in "
"`<https://2019.www.torproject.org/docs/faq.html.en#NTService>`_). Like "
"this::"
msgstr ""
"Nel prompt dei comandi dell'amministratore, installa ``tor`` come "
"servizio utilizzando il file ``torrc`` appropriato appena creato (come "
"descritto in "
"`<https://2019.www.torproject.org/docs/faq.html.en#NTService>`_). Come "
"questo::"

#: ../../source/tor.rst:123
msgid "You are now running a system ``tor`` process in Windows!"
msgstr "Ora stai eseguendo un processo di sistema ``tor`` su Windows!"

#: ../../source/tor.rst:125
#, fuzzy
msgid ""
"Open OnionShare, click the \"⚙\" icon in it, and switch to the Tor "
"Settings tab. Under \"How should OnionShare connect to Tor?\" choose "
"\"Connect using control port\", and set \"Control port\" to ``127.0.0.1``"
" and \"Port\" to ``9051``. Under \"Tor authentication settings\" choose "
"\"Password\" and set the password to the control port password you picked"
" above. Click the \"Test Connection to Tor\" button. If all goes well, "
"you should see \"Connected to the Tor controller\"."
msgstr ""
"Apri OnionShare e fai clic sull'icona \"⚙\" al suo interno. In \"Come "
"dovrebbe OnionShare connettersi a Tor?\" scegli \"Connetti usando la "
"porta di controllo\" e imposta \"Porta di controllo\" su ``127.0.0.1`` e "
"\"Porta\" su ``9051``. In \"Impostazioni di autenticazione Tor\" scegli "
"\"Password\" e imposta la password sulla password della porta di "
"controllo che hai scelto sopra. Fai clic sul pulsante \"Test connessione "
"a Tor\". Se tutto va bene, dovresti vedere \"Connesso al controller "
"Tor\"."

#: ../../source/tor.rst:134
msgid "Using a system ``tor`` in macOS"
msgstr "Utilizzando un sistema ``tor`` su macOS"

#: ../../source/tor.rst:136
msgid ""
"First, install `Homebrew <https://brew.sh/>`_ if you don't already have "
"it, and then install Tor::"
msgstr ""
"Innanzitutto, installa `Homebrew <https://brew.sh/index_it>`_ se non lo "
"hai già. Quindi, installa Tor::"

#: ../../source/tor.rst:140
msgid "Now configure Tor to allow connections from OnionShare::"
msgstr "Ora configura Tor per consentire le connessioni da OnionShare::"

#: ../../source/tor.rst:147
msgid "And start the system Tor service::"
msgstr "E avvia il servizio di sistema Tor:"

#: ../../source/tor.rst:151
#, fuzzy
msgid ""
"Open OnionShare, click the \"⚙\" icon in it, and switch to the Tor "
"Settings tab. Under \"How should OnionShare connect to Tor?\" choose "
"\"Connect using socket file\", and set the socket file to be "
"``/usr/local/var/run/tor/control.socket``. Under \"Tor authentication "
"settings\" choose \"No authentication, or cookie authentication\". Click "
"the \"Test Connection to Tor\" button."
msgstr ""
"Apri OnionShare e fai clic sull'icona \"⚙\" al suo interno. In \"Come "
"dovrebbe OnionShare connettersi a Tor?\" scegli \"Connetti usando il file"
" socket\" e imposta il file socket come "
"``/usr/local/var/run/tor/control.socket``. In \"Impostazioni di "
"autenticazione di Tor\" scegli \"Nessuna autenticazione o autenticazione "
"cookie\". Fai clic sul pulsante \"Prova connessione a Tor\"."

#: ../../source/tor.rst:157 ../../source/tor.rst:177
msgid "If all goes well, you should see \"Connected to the Tor controller\"."
msgstr "Se tutto va bene, dovresti vedere \"Connesso al controller di Tor\"."

#: ../../source/tor.rst:160
msgid "Using a system ``tor`` in Linux"
msgstr "Utilizzando un sistema ``tor`` su Linux"

#: ../../source/tor.rst:162
msgid ""
"First, install the ``tor`` package. If you're using Debian, Ubuntu, or a "
"similar Linux distro, It is recommended to use the Tor Project's "
"`official repository <https://support.torproject.org/apt/tor-deb-"
"repo/>`_."
msgstr ""
"Innanzitutto, installa il pacchetto ``tor``. Se stai usando Debian, "
"Ubuntu o una distribuzione Linux simile, si consiglia di utilizzare il "
"`repository ufficiale del progetto Tor "
"<https://support.torproject.org/it/apt/tor-deb-repo/>`_."

#: ../../source/tor.rst:164
msgid ""
"Next, add your user to the group that runs the ``tor`` process (in the "
"case of Debian and Ubuntu, ``debian-tor``) and configure OnionShare to "
"connect to your system ``tor``'s control socket file."
msgstr ""
"Successivamente, aggiungi il tuo utente al gruppo che esegue il processo "
"``tor`` (nel caso di Debian e Ubuntu, ``debian-tor``) e configura "
"OnionShare per connettersi al file socket di controllo del tuo sistema "
"``tor``."

#: ../../source/tor.rst:166
msgid ""
"Add your user to the ``debian-tor`` group by running this command "
"(replace ``username`` with your actual username)::"
msgstr ""
"Aggiungi il tuo utente al gruppo ``debian-tor`` eseguendo questo comando "
"(sostituisci ``username`` con il tuo nome utente effettivo):"

#: ../../source/tor.rst:170
#, fuzzy
msgid ""
"Reboot your computer. After it boots up again, open OnionShare, click the"
" \"⚙\" icon in it, and switch to the Tor Settings tab. Under \"How should"
" OnionShare connect to Tor?\" choose \"Connect using socket file\". Set "
"the socket file to be ``/var/run/tor/control``. Under \"Tor "
"authentication settings\" choose \"No authentication, or cookie "
"authentication\". Click the \"Test Connection to Tor\" button."
msgstr ""
"Riavvia il computer. Dopo il riavvio, apri OnionShare e fai clic "
"sull'icona \"⚙\" al suo interno. In \"Come dovrebbe OnionShare "
"connettersi a Tor?\" scegli \"Connetti tramite file socket\". Imposta il "
"file socket come ``/var/run/tor/control``. In \"Impostazioni di "
"autenticazione di Tor\" scegli \"Nessuna autenticazione o autenticazione "
"cookie\". Fai clic sul pulsante \"Prova connessione a Tor\"."

#~ msgid "Using a system Tor in Mac OS X"
#~ msgstr ""

#~ msgid ""
#~ "There are several options for how "
#~ "OnionShare should connect to Tor. You"
#~ " can change them in Settings, which"
#~ " you can get to by clicking the"
#~ " gear icon in the bottom-right "
#~ "of the window."
#~ msgstr ""

#~ msgid "Use Tor that is bundled with OnionShare"
#~ msgstr ""

#~ msgid ""
#~ "This is the default way that "
#~ "OnionShare connects to Tor, and it's "
#~ "also the simplest and most reliable "
#~ "way. For this reason, it's recommended"
#~ " for most users."
#~ msgstr ""

#~ msgid ""
#~ "When you open OnionShare, it will "
#~ "launch a Tor process in the "
#~ "background that's configured specifically for"
#~ " OnionShare to use. This Tor process"
#~ " won't interfere with other Tor "
#~ "processes on your computer, so you're"
#~ " free to run Tor Browser or use"
#~ " a system Tor in the background."
#~ msgstr ""

#~ msgid "Attempt automatic configuration with Tor Browser"
#~ msgstr ""

#~ msgid ""
#~ "You can configure OnionShare to connect"
#~ " to the Tor that comes with Tor"
#~ " Browser. First, `download Tor Browser "
#~ "<https://www.torproject.org>`_ here if you "
#~ "don't already have it. With this "
#~ "setting selected, you need to keep "
#~ "Tor Browser open in the background "
#~ "while you're using OnionShare."
#~ msgstr ""

#~ msgid "Using a system Tor in Windows"
#~ msgstr ""

#~ msgid ""
#~ "Download the Tor Windows Expert Bundle,"
#~ " which you can get `from here "
#~ "<https://www.torproject.org/download/tor/>`_. Extract the"
#~ " zip file and copy the extracted "
#~ "folder to ``C:\\Program Files (x86)\\``, "
#~ "and rename the folder to ``tor-"
#~ "win32``, so that inside that folder "
#~ "is the ``Data`` and ``Tor`` folders."
#~ msgstr ""

#~ msgid ""
#~ "Make up a control port password. "
#~ "I'm going to use ``comprised stumble "
#~ "rummage work avenging construct volatile`` "
#~ "as my password. Now open a command"
#~ " prompt as an administrator, and use"
#~ " ``tor.exe --hash-password`` to generate"
#~ " a hash of your password. For "
#~ "example::"
#~ msgstr ""

#~ msgid ""
#~ "The hashed password output is displayed"
#~ " after some warnings (which you can"
#~ " ignore). In my case, it was "
#~ "``16:00322E903D96DE986058BB9ABDA91E010D7A863768635AC38E213FDBEF``."
#~ msgstr ""

#~ msgid ""
#~ "Now create a new text file at "
#~ "``C:\\Program Files (x86)\\tor-win32\\torrc`` "
#~ "and put this in it, replacing the"
#~ " ``HashedControlPassword`` with the one you"
#~ " just generated::"
#~ msgstr ""

#~ msgid ""
#~ "In your administrator command prompt, "
#~ "install tor as a service using the"
#~ " appropriate ``torrc`` file you just "
#~ "created (see `here "
#~ "<https://2019.www.torproject.org/docs/faq.html.en#NTService>`_ "
#~ "for more information on doing this). "
#~ "Like this::"
#~ msgstr ""

#~ msgid "You're now running a system Tor in Windows!"
#~ msgstr ""

#~ msgid ""
#~ "Open OnionShare. Click the Settings "
#~ "icon. Under \"How should OnionShare "
#~ "connect to Tor?\" choose \"Connect using"
#~ " control port\", and set the control"
#~ " port host to ``127.0.0.1`` and the"
#~ " port to ``9051``. Under \"Tor "
#~ "authentication options\" choose \"Password\" "
#~ "and set the password to your "
#~ "password, in my case ``comprised stumble"
#~ " rummage work avenging construct "
#~ "volatile``. Click the \"Test Settings\" "
#~ "button. If all goes well, you "
#~ "should see successfully connected to "
#~ "tor."
#~ msgstr ""

#~ msgid "Using a system Tor in macOS"
#~ msgstr ""

#~ msgid ""
#~ "First, install `Homebrew <http://brew.sh/>`_ "
#~ "if you don't already have it. "
#~ "Then, install Tor::"
#~ msgstr ""

#~ msgid ""
#~ "Open OnionShare. Click the Settings "
#~ "icon. Under \"How should OnionShare "
#~ "connect to Tor?\" choose \"Connect using"
#~ " socket file\", and set the socket"
#~ " file to be "
#~ "``/usr/local/var/run/tor/control.socket``. Under \"Tor "
#~ "authentication options\" choose \"No "
#~ "authentication, or cookie authentication\". "
#~ "Click the \"Test Settings\" button. If"
#~ " all goes well, you should see "
#~ "successfully connected to tor."
#~ msgstr ""

#~ msgid "Using a system Tor in Linux"
#~ msgstr ""

#~ msgid ""
#~ "First, install the tor package. If "
#~ "you're using Debian, Ubuntu, or a "
#~ "similar Linux distro, I recommend you"
#~ " use Tor Project's `official repository "
#~ "<https://2019.www.torproject.org/docs/debian.html.en>`_. For "
#~ "example, in Ubuntu 20.04::"
#~ msgstr ""

#~ msgid ""
#~ "Next, add your user to the group"
#~ " that runs the Tor process (in "
#~ "the case of Debian and Ubuntu, "
#~ "``debian-tor``) and configure OnionShare to"
#~ " connect to your system Tor's control"
#~ " socket file."
#~ msgstr ""

#~ msgid ""
#~ "Reboot your computer. After it boots "
#~ "up again, open OnionShare. Click the "
#~ "Settings icon. Under \"How should "
#~ "OnionShare connect to Tor?\" choose "
#~ "\"Connect using socket file\", and set"
#~ " the socket file to be "
#~ "``/var/run/tor/control``. Under \"Tor authentication"
#~ " options\" choose \"No authentication, or"
#~ " cookie authentication\". Click the \"Test"
#~ " Settings\" button. If all goes well,"
#~ " you should see successfully connect "
#~ "to Tor."
#~ msgstr ""

#~ msgid ""
#~ "If your access to the internet is"
#~ " censored, you can configure OnionShare "
#~ "to connect to the Tor network "
#~ "using `Tor bridges "
#~ "<https://2019.www.torproject.org/docs/bridges.html.en>`_. If "
#~ "OnionShare successfully connects to Tor, "
#~ "you don't need to use a bridge."
#~ msgstr ""

#~ msgid "To configure bridges, open OnionShare settings."
#~ msgstr ""

#~ msgid ""
#~ "You can use the built-in obfs4 "
#~ "pluggable transports, the built-in "
#~ "meek_lite (Azure) pluggable transports, or "
#~ "custom bridges, which you can obtain "
#~ "from Tor's `BridgeDB "
#~ "<https://bridges.torproject.org/>`_. If you need "
#~ "to use a bridge, you should try"
#~ " the built-in obfs4 ones first."
#~ msgstr ""

#~ msgid ""
#~ "Download the Tor Windows Expert Bundle"
#~ " `from <https://www.torproject.org/download/tor/>`_. "
#~ "Extract the ZIP file and copy the"
#~ " extracted folder to ``C:\\Program Files"
#~ " (x86)\\`` Rename the extracted folder "
#~ "with ``Data`` and ``Tor`` in it to"
#~ " ``tor-win32``."
#~ msgstr ""
#~ "Scarica Tor Windows Expert Bundle `da"
#~ " <https://www.torproject.org/it/download/tor/>`_. Estrai "
#~ "il file ZIP e copia la cartella"
#~ " estratta in ``C:\\Programmi(x86)\\`` Rinomina"
#~ " la cartella estratta con ``Dati`` e"
#~ " `` Tor`` in ``tor-win32``."

#~ msgid "Use the ``tor`` bundled with OnionShare"
#~ msgstr "Usa ``tor`` fornito con OnionShare"

#~ msgid "Using Tor bridges"
#~ msgstr "Usare i bridge di Tor"

#~ msgid "To configure bridges, click the \"⚙\" icon in OnionShare."
#~ msgstr "Per configurare i bridge, fare clic sull'icona \"⚙\" in OnionShare."

#~ msgid ""
#~ "You can use the built-in obfs4 "
#~ "pluggable transports, the built-in "
#~ "meek_lite (Azure) pluggable transports, or "
#~ "custom bridges, which you can obtain "
#~ "from Tor's `BridgeDB "
#~ "<https://bridges.torproject.org/>`_. If you need "
#~ "to use a bridge, try the built-"
#~ "in obfs4 ones first."
#~ msgstr ""
#~ "È possibile utilizzare i trasporti "
#~ "collegabili obfs4 incorporati, i trasporti "
#~ "collegabili meek_lite (Azure) incorporati o"
#~ " bridge personalizzati, che è possibile "
#~ "ottenere da `BridgeDB "
#~ "<https://bridges.torproject.org/?lang=it>`_ di Tor. "
#~ "Se hai bisogno di usare un bridge,"
#~ " prova prima quelli incorporati obfs4."

#~ msgid ""
#~ "Pick a way to connect OnionShare "
#~ "to Tor by clicking Network Settings "
#~ "from the welcome screen, or the "
#~ "Tor onion icon in the bottom right"
#~ " of the OnionShare window to open "
#~ "the Tor Settings tab."
#~ msgstr ""
#~ "Scegli un modo per connettere OnionShare"
#~ " a Tor facendo clic sull'icona Tor"
#~ " onion in basso a destra nella "
#~ "finestra di OnionShare per aprire la "
#~ "scheda Impostazioni Tor."

#~ msgid "Getting Around Censorship"
#~ msgstr "Come aggirare la censura"

#~ msgid ""
#~ "If your access to the internet is"
#~ " censored, you can configure OnionShare "
#~ "to connect to the Tor network "
#~ "using `Tor bridges <https://tb-"
#~ "manual.torproject.org/bridges/>`_. If OnionShare "
#~ "connects to Tor without one, you "
#~ "don't need to use a bridge."
#~ msgstr ""
#~ "Se il tuo accesso a Internet è "
#~ "censurato, puoi configurare OnionShare per "
#~ "la connessione alla rete Tor usando "
#~ "`Tor bridges <https://tb-"
#~ "manual.torproject.org/bridges/>`_. Se OnionShare si"
#~ " connette a Tor senza uno, non "
#~ "è necessario utilizzare un bridge."