* new classe p3zcNatAssist
* moved some common ZeroConf functions / definitions around.
* moved virtual tick() to parent class: pqiNetAssist
* added zcNetAssist section to makefiles. (active for OSX build)
* setup switch between p3zcNatAssist & upnphandler in rsinit.cc
NOTE: Still to test network restart, etc, and correct exchange of external Ip Address.
git-svn-id: http://svn.code.sf.net/p/retroshare/code/trunk@4800 b45a01b8-16f6-495d-af2f-9b41ad6348cc
Changes to support Relays.
* added p3BitDht::addKnownNode() so that DhtIds can be used instead of SslIds.
* switched from bdStdDht() functions to use bdModDht().
* made DhtFunctions a class variable.
* added function to modify NodePerBucket() parameter.
* Bugfix for LinkType. peerConnectAddress.flags was not initialised.
* Extra debugging of LinkType data (use LINKMGR_DEBUG_LINKTYPE).
* cleaned up udprelay output.
* Added Compile Rules to libretroshare.pro for building LocalNet Testing Version. (testnetwork)
* Added NumQueryNodes() function to bdDhtFunctions.
* Switched bdquery.cc to use bdNumQueryNodes().
* Extended bdStdDht class to bdModDht to allow NodesPerBucket to be modified.
* Fixed up Connection Fail Callback for Relay Servers.
* Added Extra debugging for Proxy Connections.
git-svn-id: http://svn.code.sf.net/p/retroshare/code/trunk@4796 b45a01b8-16f6-495d-af2f-9b41ad6348cc
* added p3BitDht::addKnownNode() so that DhtIds can be used instead of SslIds.
* switched from bdStdDht() functions to use bdModDht().
* made DhtFunctions a class variable.
* added function to modify NodePerBucket() parameter.
* Bugfix for LinkType. peerConnectAddress.flags was not initialised.
* Extra debugging of LinkType data (use LINKMGR_DEBUG_LINKTYPE).
* cleaned up udprelay output.
* Added Compile Rules to libretroshare.pro for building LocalNet Testing Version. (testnetwork)
git-svn-id: http://svn.code.sf.net/p/retroshare/code/branches/v0.5-dhtmods@4795 b45a01b8-16f6-495d-af2f-9b41ad6348cc
Merging Dht Relay improvements into the trunk. These changes should finally make relays functional.
There are still some service changes required to reduce the traffic over relays.
Summary of Changes
---------------------
* Changed the way proxy/relay peers are selected in bdConnection. (needs more work).
* Added LinkType to peer info in p3LinkMgr & rspeers.h interface.
* Added getConnectionType() to p3PeerMgr. This defaults to FRIEND for the moment.
* Provide information about Bandwidth, Transport and Peer Type via LinkType().
* Added RateCap() to limit traffic over Relay connections.
* Set Internal Rate to 75% of Relay Limit to account for transport overhead.
* Added various #include "util/rswin.h" to fix compile errors with standard ssl package.
* Removed Local variables (mConnectProxyAddr, etc) which were hiding Class Variables.
* Cleaned up bits in pqissl.cc and p3linkmgr.cc
* Increased UDP Relay Packet size (max transport of 1400 bytes per UDP packet)
* Modified checkRelay() to use Low Pass Filter to calculate Relay Bandwidth.
* Improved udprelay debugging.
* increased (x2) Relay Lifetimes - this is so that enough useful data can be transported (1meg).
* Added LOCALNET_TESTING code to rsinit.cc. This allows Port Restrictions to simulate firewalls.
* more debugging and minor bugfixes.
git-svn-id: http://svn.code.sf.net/p/retroshare/code/trunk@4780 b45a01b8-16f6-495d-af2f-9b41ad6348cc
of the overhead associated with TCP and Relay connections:
* The Internal rate is calculated based on transmitted data (a reliable stream).
* The Relay rate is calculated at UDP packet level and is x1.1 - x1.2 higher than internal rate.
The Relay will drop the connection if peers exceed specified level - so best to leave some head room.
git-svn-id: http://svn.code.sf.net/p/retroshare/code/branches/v0.5-dhtmods@4773 b45a01b8-16f6-495d-af2f-9b41ad6348cc
* Added LinkType to p3LinkMgr => exposed via rspeers.h
* Added ConnectionType to p3PeerMgr. This is dummy default to FRIEND at the moment.
* Flag bandwidth limited Relay links as such.
* Switched DNS Address connect to in front of historical addresses.
* Reverted Flags in p3LinkMgr to what they were.
* Added LinkType Flags to rspeers.h
* removed getConnectFlags() as it was a bad way to do things.
git-svn-id: http://svn.code.sf.net/p/retroshare/code/branches/v0.5-dhtmods@4769 b45a01b8-16f6-495d-af2f-9b41ad6348cc
* Adding more detailed flags to each connection.
* Cleaned up unneeded stuff from p3LinkMgr.
* Added rswin.h includes before openssl - allows compilation using std Win OpenSSL.
* Added getConnectFlags() to Net Base.
* removed net_attempt and associated obsolete variables from pqissl
* Made NetBinInterface protected in pqiperson (is this okay?)
git-svn-id: http://svn.code.sf.net/p/retroshare/code/branches/v0.5-dhtmods@4767 b45a01b8-16f6-495d-af2f-9b41ad6348cc
- registers oneself, browses and resolves services.
- Lots still TODO:
- parse TxtRecords.
- Track peers.
- feedback to libretroshare
- etc, etc.
Enabled ZeroConf in libretroshare.pro & rsinit.cc. Compiles and runs on OSX.
Added RelayHandler to Dht, to enable external control of Relays.
Marked pqiAssist Interface for changes... will be revamped with ZeroConf.
git-svn-id: http://svn.code.sf.net/p/retroshare/code/branches/v0.5-dhtmods@4727 b45a01b8-16f6-495d-af2f-9b41ad6348cc
Fixed small hangs of RetroShare by removing the core lock in RsServer::ConfigGetDataRates. Is that needed?
git-svn-id: http://svn.code.sf.net/p/retroshare/code/trunk@4725 b45a01b8-16f6-495d-af2f-9b41ad6348cc
Summary Of Changes:
* Reduced Default DHT Message rate from (50msg/sec) => (5msg/sec)
- Searches now take longer, but it should make crappy firewalls happy.
* Added Interface to allow this rate to be dynamically changed.
* Bugfixes for p3BanList: removed internal IPs from Lists, fixed AddBanPeer() logic bug.
* Disabled p3Dsdv, after brief test.
git-svn-id: http://svn.code.sf.net/p/retroshare/code/trunk@4705 b45a01b8-16f6-495d-af2f-9b41ad6348cc
Full Changes can be extracted from logs associated with the following checkins:
r4674 r4678 r4679 r4680 r4681 r4684 r4686 r4687 r4697 r4698 r4699
Summary of changes:
DHT Improvements:
Added knowledge of Friends / FoFs and Relays to DHT.
Added bdFriendList class to store this information.
Added Checks against known Peer:IP information to detect bad peers.
Bad Peer Checking is in Test Mode Only for the moment,
New Interfaces to exchange above information with libretroshare
Cleaned up various compiler warnings.
libretroshare Improvements:
Added p3BanList Service and DataTypes to exchange Bad Peer information.
Added Plumbing to get info from network to DHT and back.
Supply Friend List from p3LinkMgr
Supply Friend of Friend List from p3Disc.
Added p3Dsdv Service and DataTypes for NetworkWide Routing (Testing Mode).
Various BugFixes.
Patch Manual Forward mode to preserve user selected Port.
git-svn-id: http://svn.code.sf.net/p/retroshare/code/trunk@4700 b45a01b8-16f6-495d-af2f-9b41ad6348cc
* Added p3BanList as a service.
* Added interfaces to communicate addresses.
* Added debug to p3BanList.
* Fixed several bugs in the AddEntry/Condense
* Fixed Mutex deadlocks.
Improvements to Dsdv code too.
* Added p3Dsdv as a service.
* Added Function to create a TEST service for routing.
git-svn-id: http://svn.code.sf.net/p/retroshare/code/branches/v0.5-dhtmods@4687 b45a01b8-16f6-495d-af2f-9b41ad6348cc
- Added missing Mutex protection in p3BitDht.
- Added p3BitDht::addKnownPeer() to communicate with libbitdht.
- Disabled placeholder versions (addFriend/AddFriendOfFriend)
- Added netAssistKnownPeer() libretroshare interface.
- Added calls to netAssistKnownPeer() from p3disc and p3NetMgr.
- Check for NULL ptr in p3NetMgr before calling p3PeerMgr.
- Added FIX to maintain MANUAL FORWARD port (untested!)
- Removed some compiler warnings.
git-svn-id: http://svn.code.sf.net/p/retroshare/code/branches/v0.5-dhtmods@4681 b45a01b8-16f6-495d-af2f-9b41ad6348cc
Now the history is saved encrypted. Please delete all files with "chat*.xml" in your profile folder.
Added new config p3HistoryMgr and interface p3History.
Added new option to limit the count of the saved history items.
Added new simple html optimizer "RsHtml::optimizeHtml" to reduce the size of the html strings.
git-svn-id: http://svn.code.sf.net/p/retroshare/code/trunk@4623 b45a01b8-16f6-495d-af2f-9b41ad6348cc
Added new buttons to SecurityItem to add/remove the peer and view peer details.
Added new call to notifyListChange with NOTIFY_LIST_FRIENDS in AuthGPGimpl::AllowConnection.
Fixed german language.
git-svn-id: http://svn.code.sf.net/p/retroshare/code/trunk@4572 b45a01b8-16f6-495d-af2f-9b41ad6348cc
I've reduced the frequency, and increased the age for removal.
* Cleared every 31 minutes, first cleaning after 1 hour.
* old peer is no contact for 90 days.
git-svn-id: http://svn.code.sf.net/p/retroshare/code/trunk@4547 b45a01b8-16f6-495d-af2f-9b41ad6348cc
=> Giving new peers a chance to connect.
* Fixed missing return in p3PeerMgr::removeUnusedLocations()
* moved RTT defines to top of file, and increased to 150 results.
git-svn-id: http://svn.code.sf.net/p/retroshare/code/trunk@4546 b45a01b8-16f6-495d-af2f-9b41ad6348cc
the periodical call of cleanupUsedLocation, which was reloading all the GPG Keys - for each cleanup Key.
This required cleaning up various bits (AuthGPG, rsPeers, p3Disc).
* moved rsPeer::cleanUnusedLocations => p3PeerMgr::removeUnusedLocations();
- made the function light-weight, no loading of GPG Keys.
* moved getSSLCertsFromGPG() fn from rsPeers => p3PeerMgr
* added p3PeerMgr::removeAllFriendLocations() to cleanup when removing a GPG Friend.
* cleaned up rsPeers, made addFriend() / removeFriend() universal functions.
* remove bool p3Peers::setAcceptToConnectGPGCertificate(const std::string &gpg_id, bool acceptance)
* removed all Dummy SSL Ids. - There is no need for this!
* Major changes to p3disc to correct FLAWED logic. (needs more testing).
* removed as many dependancies on retroshare/rspeer.h as possible.
* changed p3turtle dependancy on rsPeers ==> mLinkMgr.
* added p3LinkMgr::getPeerName() and p3PeerMgr::getPeerName()
* added return 1 to pqissllistener::closeConnection().
* removed unused code from AuthGPG().
* removed storeAllKeys() calls in AuthGPG::AllowConnection().
git-svn-id: http://svn.code.sf.net/p/retroshare/code/trunk@4542 b45a01b8-16f6-495d-af2f-9b41ad6348cc
* log p3disc::sendHeartbeat(), successful p3linkmgr::connectAttempt()
* log reason for each pqissl::reset().
* log linkmgr & peermgr addFriend() and removeFriend().
* log pqiperson::connect(), p3PeerMgr::cleanUnusedLocations().
* Modify timing of cleanUnusedLocations (=>8min) & NETSTATE_PARAM_TIMEOUT (=>15min) (see if it has an effect).
git-svn-id: http://svn.code.sf.net/p/retroshare/code/trunk@4539 b45a01b8-16f6-495d-af2f-9b41ad6348cc
* SSL_Peek is called on new connections, and we only accept it when there is data.
* This should stop some of the unstable connections caused by wrong IP:Ports
git-svn-id: http://svn.code.sf.net/p/retroshare/code/trunk@4533 b45a01b8-16f6-495d-af2f-9b41ad6348cc
It was using the same port as the DHT, and switching to a Random one, on its own.
* Added debugging for net reset.
* Added further debugging for ssl (reset + killing existing connections)
git-svn-id: http://svn.code.sf.net/p/retroshare/code/trunk@4530 b45a01b8-16f6-495d-af2f-9b41ad6348cc
* extract external address from DhtStunner if possible.
* added p3PeerMgr::UpdateOwnAddress(), which should only be called by p3netmgr.
git-svn-id: http://svn.code.sf.net/p/retroshare/code/trunk@4512 b45a01b8-16f6-495d-af2f-9b41ad6348cc
* set PortForward in NetStateBox when the Network has been setup.
* add GeneralConfig to rsConfig external interface.
* enabled ADVANCED configuration option.
git-svn-id: http://svn.code.sf.net/p/retroshare/code/trunk@4500 b45a01b8-16f6-495d-af2f-9b41ad6348cc
- p3peermgr now uses RS_NET_MODE_XXXX instead of RS_NET_MODE_TRY_XXXX
- p3netmgr maintains both TRY and ACTUAL mode.
- actual mode is not visible through old interface (TO FIX).
- added default to UPNP mode.
* Added debug to show changes to peer->VisState.
- It seems that this is never updated by p3disc. BUG, (TO FIX).
* disabled extra debug in rsdiscitems.
git-svn-id: http://svn.code.sf.net/p/retroshare/code/trunk@4498 b45a01b8-16f6-495d-af2f-9b41ad6348cc
* Increased Timeout Periods for UDP connections - this was stopping half of them from succeeding.
* The other bug (Heartbeat / stream issues) has not been solved.
* Fixed up initialisation of p3BitDht data.
* add DropPeers() as NON-ACTIVE (this allows peers which aren't VISIBLE to still try and connect)
* export AddFriends/FOF/Others to LinkMgr to allow further SSL IDs to be added to p3BitDht.
* Export UDP Addresses to DhtWindow.
* switch off lots of debugging.
git-svn-id: http://svn.code.sf.net/p/retroshare/code/trunk@4469 b45a01b8-16f6-495d-af2f-9b41ad6348cc
* changed PeerConnectStateBox::getNetState() to calcNetState() to provide up-to-date info (internal mNetState can be stale!)
* Added "bool addrChangeLikely" parameter to ReleaseProxyExclusiveLock() - this parameter is determined by whether we actually started a UDP connection.
* disabled ForceRestun in UdpStunner if addrChange is unlikely.
* Reduced Stunner Period Slow from 3 minutes to 2 minutes - exact value will only be known after real-world testing.
* More debugging.
git-svn-id: http://svn.code.sf.net/p/retroshare/code/branches/v0.5-netupgrade@4458 b45a01b8-16f6-495d-af2f-9b41ad6348cc
* Forgot that RELAY connections need extra parameters.
* Added proxyAddr, srcAddr and Bandwidth parameters to connection attempts.
* Completed UDP connection callouts from p3bitdht.
* Added TCP connection attempt initiation from p3bitdht.
* Added PASSIVE / ACTIVE determination in p3bitdht.
* completed UDP connection logic in pqissludp.
* enabled UDPSTUN_ALLOW_LOCALNET for testing.
* added CONSTs for TOU Receiver Indices.
git-svn-id: http://svn.code.sf.net/p/retroshare/code/branches/v0.5-netupgrade@4446 b45a01b8-16f6-495d-af2f-9b41ad6348cc
Infact, it doesn't use these two classes at all (so you could pass void in the init function)...
- It should actually update p3PeerMgr when it detects a Net Address change (TODO).
This means that there is potentially no need for a dummy object - p3NetMgrIMPL can be used almost as is!
* changed p3PeerMgrIMPL & p3LinkMgrIMPL pointers back to p3PeerMgr and p3LinkMgr pointers.
git-svn-id: http://svn.code.sf.net/p/retroshare/code/branches/v0.5-netupgrade@4445 b45a01b8-16f6-495d-af2f-9b41ad6348cc
* Added ConnectionFeedback fn to NetAssistConnect & p3BitDht.
* Added TYPE definitions to pqiassist.h
* added extra parameters to p3LinkMgr::connectAttempt() (flags which will be used to pass DIRECT/PROXY/DIRECT + PASSIVE/ACTIVE)
* Added callback from p3LinkMgr to NetMgr::netAssistStatusUpdate() => Dht::ConnectionFeedback.
* updated peerConnectRequest to trigger either TCP attempt (first) or UDP connection.
* updated parameters for p3LinkMgrIMPL::tryConnectUDP()
* added p3LinkMgrIMPL::locked_ConnectAttempt_SpecificAddress() for DHT => TCP attempt.
* added extra parameter to addAddressIfUnique... bool addFront => DHT attempts get pushed to front of Queue due to timing requirements.
* added extra parameter (flags) to pqiperson::connect() - matches extra parameters to p3LinkMgr::connectAttempt().
* added p3NetMgr::netAssistStatusUpdate()
* added mConnectFlags to pqissludp
git-svn-id: http://svn.code.sf.net/p/retroshare/code/branches/v0.5-netupgrade@4443 b45a01b8-16f6-495d-af2f-9b41ad6348cc
Shifted real functionality to p3LinkMgrIMPL, p3NetMgrIMPL p3PeerMgrIMPL
This allows us to test most objects with dummy objects (i.e. no need for full AuthSSL/AuthGPG objects)
git-svn-id: http://svn.code.sf.net/p/retroshare/code/branches/v0.5-netupgrade@4441 b45a01b8-16f6-495d-af2f-9b41ad6348cc
* added DETERMINISTIC_SYMMETRIC NAT to retroshare/rsconfig and NetStateBox.
* added ExclusiveMode to udpStunner.
* Tweaked UdpStunner ping logic.
* added TCP_WAIT to Connect Logic.
NB: This stuff is still to be tested!
git-svn-id: http://svn.code.sf.net/p/retroshare/code/branches/v0.5-netupgrade@4440 b45a01b8-16f6-495d-af2f-9b41ad6348cc
* Added tick() and setRefreshPeriod() to pqiAddrAssist
* Fixed up NETSTATE #defines, all refer to retroshare/rsconfig.h
* added #define => string translations for NETSTATEs
* Added NetStateBox as an independent Network State determination (has no effect on existing code).
* added slowTick() to p3NetMgr.
* connected p3NetMgr::getNet... to NetStateBox.
* piped network state into NetStateBox.
* added p3NetMgr check for changes in NatType. (to update Stun Rate / Attach Mode (TODO))
* added NetStateBox.reset()
* tweaked lots of debugging.
* added Default Stun Period (pass -1 to setRefreshPeriod())
git-svn-id: http://svn.code.sf.net/p/retroshare/code/branches/v0.5-netupgrade@4435 b45a01b8-16f6-495d-af2f-9b41ad6348cc
* added OthersList to p3linkmgr. this is important so we can send ACTIONS for removed Peers.
* added missing mStatusChanged when adding Friend.
* added printPeerLists to PeerMgr and LinkMgr.
* tweaked debugging.
git-svn-id: http://svn.code.sf.net/p/retroshare/code/branches/v0.5-netupgrade@4427 b45a01b8-16f6-495d-af2f-9b41ad6348cc
* Catch Failed Connections, and add to NewsFeed for GUI notifications.
* outgoing connections are captured via pqissl::FailedCertificate() functions.
* incoming connections are captured at certificate verification.
* Certs are passed to AuthSSL, which calls the notification system.
* Additional types have been added to rsnotify to handle these cases.
git-svn-id: http://svn.code.sf.net/p/retroshare/code/branches/v0.5-netupgrade@4425 b45a01b8-16f6-495d-af2f-9b41ad6348cc
* switched off lots of debugging, and removed "common" messages, so we can focus on the actions.
* Added extra debugging focused on the connections.
* Removed "lastconnect" from p3LinkMgr.
* added p3PeerMgr::updateLastConnect() fn, so this parameter will be stored.
* added calls from p3LinkMgr at connect and disconnect.
git-svn-id: http://svn.code.sf.net/p/retroshare/code/branches/v0.5-netupgrade@4424 b45a01b8-16f6-495d-af2f-9b41ad6348cc
* Split p3bitdht_peers.cc debugging in two. Hid Id Translation debug (that code is fine)
* Added initialisation of p3bitdht peer data structure (using values from peernet).
* Added BITDHT_QFLAGS_UPDATES flag.
* Added Tick() interface to NetAssistConnect interface, tick it from p3NetMgr.
* FIXED OLD BUG: netAssistFriend was not being called from p3LinkMgr::connectResult() this meant all peers where being searched for.
git-svn-id: http://svn.code.sf.net/p/retroshare/code/branches/v0.5-netupgrade@4423 b45a01b8-16f6-495d-af2f-9b41ad6348cc
* Improved debugging messages for p3linkmgr & p3netmgr, switched on debugging.
* added ids to p3bitdht peers.
* added datatypes to RsDht peers data structure, and translate the data.
* add const to PeerConnectStateBox::connectState().
* cleaned up p3LinkMgr::locked_ConnectAttempt_AddDynDNS() a bit.
* filled in friend data types in p3LinkMgr (allows connections now!)
* added printConnectState() in p3LinkMgr
git-svn-id: http://svn.code.sf.net/p/retroshare/code/branches/v0.5-netupgrade@4421 b45a01b8-16f6-495d-af2f-9b41ad6348cc
- Added configuration saving for plugin manager and serialization methods
- added a list of accepted plugin hashes
- added plugin widget for each plugin in settings, to allow enabling/disabling plugins
- updated LinkCloud plugin to new rsPlugin class
- put the addconfiguration for plugin manager in rsinit.cc a bit earlier to allow to load
the list of accepted hashes early enough
- added icon for disabled plugins
git-svn-id: http://svn.code.sf.net/p/retroshare/code/trunk@4393 b45a01b8-16f6-495d-af2f-9b41ad6348cc
You can enable the debugging of the waiting time for a lock of RsMutex in rsthreads.h with
#define RSMUTEX_DEBUG 300
That means all locks waiting longer than 300ms are logged into the stderr.
git-svn-id: http://svn.code.sf.net/p/retroshare/code/trunk@4392 b45a01b8-16f6-495d-af2f-9b41ad6348cc
Major changes are:
* Improvements to tcponudp library to allow multiple UdpStacks / ports, with alternative recievers.
* Resurrected the UdpStunner code, and improved it.
* Added UdpRelay code.
* Modified startup code and ssludp code to use the new tcponudp and add a stunner.
* fixed buggy rs_inet_ntoa
* fixed a bunch of apple gcc warnings. mainly for(;;); => for(;;) ;
These changes shouldn't affect libretroshare stability... those changes will follow!
git-svn-id: http://svn.code.sf.net/p/retroshare/code/trunk@4359 b45a01b8-16f6-495d-af2f-9b41ad6348cc
- ported LinksCloud to a new plugin, and removed it from main sources
Next moves:
- add gui for managing plugins
- handle windows compilation
git-svn-id: http://svn.code.sf.net/p/retroshare/code/trunk@4275 b45a01b8-16f6-495d-af2f-9b41ad6348cc
Removed extra "/" of the filename (e.g. "E://") of the hashed file when sharing a whole drive.
Recompile of the gui needed.
git-svn-id: http://svn.code.sf.net/p/retroshare/code/trunk@4200 b45a01b8-16f6-495d-af2f-9b41ad6348cc
Added new button in ConnectFriendWizard for cleaning the certificate.
Fixed cleaning:
- added blank line after the armor header
- moved the checksum to a new line
Recompile of the GUI needed.
git-svn-id: http://svn.code.sf.net/p/retroshare/code/trunk@4134 b45a01b8-16f6-495d-af2f-9b41ad6348cc
so RS ended up with 200+ zombie child processes. This prevented gpg from being called.
The fix was to add waitpid() calls to cleanup the zombies.
* added cleanupZombies() to authgpg.cc (OSX only).
* updated OSX gpgme libraries to 1.3.0 (added libassuan to RetroShare.pro).
git-svn-id: http://svn.code.sf.net/p/retroshare/code/trunk@3974 b45a01b8-16f6-495d-af2f-9b41ad6348cc
- authssl would call OPENSSL_malloc without OPENSSL_free
- pqistore was not deleting items in pqiSSLStore when BIN_FLAGS_NO_DELETE is not here
- rsdir/rsinit were calling opendir withoug closedir (which might eat FDs, in addition)
- udplayer was not freeing it's 16KB buffer at end of loop.
git-svn-id: http://svn.code.sf.net/p/retroshare/code/trunk@3948 b45a01b8-16f6-495d-af2f-9b41ad6348cc
Changed the usage of RsPeerDetails.validLvl to RsPeerDetails.trustLvl for the display in the column "Did I authenticated peer" in NetworkDialog.
Added an icon to the MessageBox of the NotifySysMessage.
Fixed german language.
git-svn-id: http://svn.code.sf.net/p/retroshare/code/trunk@3926 b45a01b8-16f6-495d-af2f-9b41ad6348cc
* shifted dht stats call outside of p3connmgr's mtx.
NB: As Dht callback functions hold DHT lock, then lock p3ConnectMgr...
we cannot have any opposite locks (p3connmgr, then DHT) or we have
potential for a deadlock.
git-svn-id: http://svn.code.sf.net/p/retroshare/code/trunk@3861 b45a01b8-16f6-495d-af2f-9b41ad6348cc
* new uniform #define DEBUG_TRANSFERS to switch on packet timings.
* switched off by default.
* enabled BinData printing again.
git-svn-id: http://svn.code.sf.net/p/retroshare/code/trunk@3785 b45a01b8-16f6-495d-af2f-9b41ad6348cc
* print packet size and time - when actually sending it.
* print reason for stopping to read or send packets.
git-svn-id: http://svn.code.sf.net/p/retroshare/code/trunk@3780 b45a01b8-16f6-495d-af2f-9b41ad6348cc
Reload all gpg keys in AuthGPGimpl::LoadCertificateFromString, when new signatures are added - not only the key was imported.
Changed parameters of RsPeers and AuthGPG from "std::string" to "const std::string&"
Recompile of the GUI needed.
git-svn-id: http://svn.code.sf.net/p/retroshare/code/trunk@3753 b45a01b8-16f6-495d-af2f-9b41ad6348cc
* Plumbed stats through the the retroshare interface.
* Also changed Channel store period back to 10 minutes.... (Reduce overall file count).
This must be done some time before the any changes are made to Channels periods.
git-svn-id: http://svn.code.sf.net/p/retroshare/code/trunk@3721 b45a01b8-16f6-495d-af2f-9b41ad6348cc
- FAIL if too old.
- FAIL if invalid address.
- FAIL if on BannedIpList (=1.0.0.0)
- ACCEPT if extAddress.
- ACCEPT if !extAddress && sameNet(localAddr).
- FAIL all the rest.
* Test Results are printed if CONN_DEBUG is switched on.
git-svn-id: http://svn.code.sf.net/p/retroshare/code/trunk@3705 b45a01b8-16f6-495d-af2f-9b41ad6348cc
Problem:
RetroShare connects to all ssl's at once. In Windows XP there is a build-in connection limit of concurrent incomplete connections.
Quote:
"The TCP/IP stack in Windows XP with Service Pack 2 (SP2) installed limits the number of concurrent, incomplete outbound TCP connection attempts. When the limit is reached, subsequent connection attempts are put in a queue and resolved at a fixed rate so that there are only a limited number of connections in the incomplete state."
This results in a high usage of the nonepaged pool and when it runs over the limit it results in the following error in the system log:
German: "TCP/IP hat das Sicherheitslimit erreicht, das für die Anzahl gleichzeitiger TCP-Verbindungsversuche festgelegt wurde."
English: "TCP/IP has reached the security limit imposed on the number of concurrent (incomplete) TCP connect attempts."
After a longer runtime of RetroShare and a very high usage of the nonepaged pool all connections of all running programs are lost and no new connections can be made. At the end it can cause a blue screen.
git-svn-id: http://svn.code.sf.net/p/retroshare/code/trunk@3631 b45a01b8-16f6-495d-af2f-9b41ad6348cc
* NOTE about how to correctly implement Peer filtering.
* added peerConnectRequest() when PeerCallback(success) happens... starts UDP connection.
* Split the p3conmgr::tryConnect() functions into sub functions.
* added p3ConnMgr functions for UDP connections.
* Added AddifUnique(conect_address), to ConnMgr, this should reduce the number of connection attempts, by removing dups.
* Disabled bitdht in libretroshare.pro for the moment.
git-svn-id: http://svn.code.sf.net/p/retroshare/code/trunk@3605 b45a01b8-16f6-495d-af2f-9b41ad6348cc
Added second mutex for the gpg engine.
Now the call to the gpg engine (for example AuthGPGimpl::LoadCertificateFromString) doesn't block the GUI.
The existing problem is still the call of AuthGPGimpl::storeAllKeys every minute before access the gpg data.
git-svn-id: http://svn.code.sf.net/p/retroshare/code/trunk@3555 b45a01b8-16f6-495d-af2f-9b41ad6348cc
- added "mStatusChanged = true" on disconnect of a peer - the statusChange was not notified in time
MessengerWindow
- removed unused method updatePeersAvatar
Changes in status service:
- removed unused method statusAvailable
- new notifier for status change
- enabled the tick for receiving items
- always up to date status map
- no huge memory usage, if no list is visible who call getStatus and processed the received items
- send notify on status change
- renamed getStatus to getStatusList and created a new method getStatus to get status of one peer
- fixed: send status directly after the connect of a peer
Now the frame around the avatar in private chat changes when the peer change the state.
git-svn-id: http://svn.code.sf.net/p/retroshare/code/trunk@3380 b45a01b8-16f6-495d-af2f-9b41ad6348cc
libretroshare/src/retroshare/
All the relevant headers have been modified to reflect that change.
This allows installation of libretroshare on a system, headers will
be put in $WHEREVER/retroshare/ and we keep the ability to compile
against them, be it on the system or in the SVN tree.
git-svn-id: http://svn.code.sf.net/p/retroshare/code/trunk@3342 b45a01b8-16f6-495d-af2f-9b41ad6348cc
* OSX Bug: doesn't like classes in C files. switched to void * pointer.
* A little extra debugging in pqissl on disconnects.
* switched on bitdht by default in libretroshare.pro
git-svn-id: http://svn.code.sf.net/p/retroshare/code/trunk@3334 b45a01b8-16f6-495d-af2f-9b41ad6348cc
- replaced the findItems() call into a hand-written search (this was causing a rare bug in displaying downloads)
git-svn-id: http://svn.code.sf.net/p/retroshare/code/trunk@3318 b45a01b8-16f6-495d-af2f-9b41ad6348cc
* Added TS check to SSL_RETURN_ZERO code.
- Existing code was dependent on tick rate. (could kill connection in 2-3 seconds)
- If nothing is received within 15 seconds - the connection will be killed.
* Removed "No send if RETURN_ZERO" check.
- This causes deadlocks and kills connections.
git-svn-id: http://svn.code.sf.net/p/retroshare/code/trunk@3287 b45a01b8-16f6-495d-af2f-9b41ad6348cc
sslfns.h: test for existing function with #ifdef doesn't work, used OPENSSL_VERSION_NUMBER instead - please test
git-svn-id: http://svn.code.sf.net/p/retroshare/code/trunk@3284 b45a01b8-16f6-495d-af2f-9b41ad6348cc
* Added thread-safe rs_inet_ntoa function (util/rsnet.cc)
* Switched all calls to this function (most of the changes)
* Modified getLocalInterfaces() and getPreferredInterface() to avoid string conversions.
- NB: Modified windows functions too, but unable to test (hope it compiles!)
Also:
* Added EVP_CIPHER_CTX_rand_key() replacement function for old versions of SSL (pre 0.9.8) (for OSX 10.5)
- NB: This code should be reworked to remove these calls anyway.
* Updated tests/pqi to handle above changes.
git-svn-id: http://svn.code.sf.net/p/retroshare/code/trunk@3281 b45a01b8-16f6-495d-af2f-9b41ad6348cc
* Changed calls from AuthSSL to AuthGPG and tested. looks like it works!
* added extra connect addresses in p3connmgr (current[local/server]addr)
* added mConnMgr->addFriend() call to pqissllistener to add unknown ssl certs.
git-svn-id: http://svn.code.sf.net/p/retroshare/code/trunk@3253 b45a01b8-16f6-495d-af2f-9b41ad6348cc
* Bugfix in correctly adding ipList.
* restored setLocal/Ext calls from peer.
* Added extra debugging in p3disc.
* Cleaned up debugging in p3connmgr.
* switched off debugging in rsdiscitems.
* reorder ipList (most recent first).
* removed DEBUG switches in libretroshare.pro
git-svn-id: http://svn.code.sf.net/p/retroshare/code/trunk@3252 b45a01b8-16f6-495d-af2f-9b41ad6348cc
* Corrected mLocal -> mExt in ipset.cc
* Added pqiipset_test
* added both Ext and Local address to GUI display.
* p3connmgr: Ip Addresses only updated if we connected (otherwise port is wrong).
* p3connmgr: update external address when we get it.
git-svn-id: http://svn.code.sf.net/p/retroshare/code/trunk@3251 b45a01b8-16f6-495d-af2f-9b41ad6348cc
(Sorry for the ridiculously large check-in, wants to fix lots of stuff.)
Other Changes:
* Added SSL Test Harness. (authssltest)
* Added GPG Test Harness. (authssltest)
* Reworked SSL/GPG startup to enable test harnesses
* pqiperson: added notify of FAIL if connection method unavailable.
* added p3tunnel to pqissltunnel init.
* pqimonitor: added ipHistory to connect callback.
p3ConnectMgr Changes:
* removed STUN system - wasn't operating correctly anyway without DHT.
* switched to new IpAddress history data types. (removed lots of code)
* Added Addr history for both Local and Ext addresses.
* removed p3tunnel references in p3connmgr
* fixed up mUseTunnelConnection flags (now used!)
* fixed up mUseExtFinder flags (now used!)
* added improved Net Status.
* corrected UPNP / EXT / UDP startup. (was always UPNP).
* fixed netReset() and netStartup().
* removed unnecessary DEBUG code.
* added UPNP timeout code (600 secs - why does it take so long?)
* added improved netExtCheck().
* removed wierd netConsistencyCheck() ... to rework.
* corrected connect / reconnect code.
* removed DHT notify code.
git-svn-id: http://svn.code.sf.net/p/retroshare/code/trunk@3247 b45a01b8-16f6-495d-af2f-9b41ad6348cc
Every call to RsInit::LoadCertificates() now creates a file:
~/.retroshare/xxxxxxxxxxxxxxxxxxxx/lock
which is then bound to a system lock (fcntl F_SETLK).
If the lock request fails, it means another instance is already
running with the same profile.
git-svn-id: http://svn.code.sf.net/p/retroshare/code/trunk@3241 b45a01b8-16f6-495d-af2f-9b41ad6348cc
Rework of AuthSSL: cleanup and split up.
* Split out independent SSL functions into sslfns.h / sslfns.cc
* Reworked SSL certificate storage.
* Reworked SignDataBin / VerifyDataBin (fixed memory leaks).
* Removed funny code: /* cert->cert_info->key->pkey is NULL */
- just use X509_get_pubkey() instead.
* Removed lots of old code.
* Fixed up Mutex usage in AuthSSL - which was random.
* Removed certificates from tlvSignature serialiser obj.
* removed certificates from p3distrib messages.
* Starting removing "unused parameter" compiler warnings.
* Various related changes to make libretroshare compile.
git-svn-id: http://svn.code.sf.net/p/retroshare/code/trunk@3222 b45a01b8-16f6-495d-af2f-9b41ad6348cc
* restored AuthSSL::Failed/CheckCertificate() calls.
* removed mConnMgr->isConnected() checks. These should be elsewhere.
* enabled exit(1) call if cannot open listening socket.
git-svn-id: http://svn.code.sf.net/p/retroshare/code/trunk@3218 b45a01b8-16f6-495d-af2f-9b41ad6348cc
p3connmgr: This needs major help... and will be revisited.
Only changes to get code compiling for now.
* revert peerStatus() function signatures (to match pqimonitor.h)
git-svn-id: http://svn.code.sf.net/p/retroshare/code/trunk@3217 b45a01b8-16f6-495d-af2f-9b41ad6348cc
This functionality might need to be restored later,
but should be done with list<> for both Local and Remote Addrs.
git-svn-id: http://svn.code.sf.net/p/retroshare/code/trunk@3215 b45a01b8-16f6-495d-af2f-9b41ad6348cc
AuthSSL / AuthGPG: Bits and pieces still need fixing up.
AuthSSL will be rechecked later ;)
* Mutex bug in authGPG (not very serious one).
* removed _locked() suffix from functions (as they do the locking now).
* added dummy FailedCertificate / CheckCertificate fns to AuthSSL
* removed last bits of awful SSL_ex_data hack.
git-svn-id: http://svn.code.sf.net/p/retroshare/code/trunk@3213 b45a01b8-16f6-495d-af2f-9b41ad6348cc
so I can properly document what is being changed!
Revert / Merge : pqissl / pqissludp code.
* restored original timeout system.
* removed weird testing code - should never have been here!
* switched extra checks to generate ALERT msgs - we want to know if they happen.
* removed quietShutdown (breaks TLS protocol - why was this added?)
* switched listening on all the time. (helps restore disconnects).
* restored common connect parameters (removed duplicates in ssludp).
* restored AuthSSL->Failed/CheckCertificate() calls ... useful.
git-svn-id: http://svn.code.sf.net/p/retroshare/code/trunk@3212 b45a01b8-16f6-495d-af2f-9b41ad6348cc
This used an unprotected singleton -> bad... Probably killed a lot of connections.
* removed mConnMgr tests in authssl
AuthSSL shouldn't use ConnectMgr. what happened to abstraction / seperation of function???
This code prevents quick reconnections.
* Disabled AuthSSL from adding new SSL peers.
This functionality is important... but should be handled elsewhere (p3connmgr or pqissl)
git-svn-id: http://svn.code.sf.net/p/retroshare/code/trunk@3200 b45a01b8-16f6-495d-af2f-9b41ad6348cc
use for handling the packet: RsItem::DATA_QUEUE for data and RsItem::CONTROL_QUEUE for
control packets, to be used in pqistreamer.
Up to now, File data chunks where the only packets that were going into the --less prioritized--
data queue. Now, the default in RsItem::queueType() being to return CONTROL_QUEUE, developpers can
choose which queue t use by simply overloading this method so that it returns a different value.
The first use of this was to make generic turtle tunnel packets use the data queue instead of
the control queuem, which restores a correct balance between turtle downloads and friends downloads.
git-svn-id: http://svn.code.sf.net/p/retroshare/code/trunk@3153 b45a01b8-16f6-495d-af2f-9b41ad6348cc
3148: modified the update system for address lists, so that the list is totally
replaced (and not merged) when it comes from the peer itself. This helps
cleaning wrong addresses
libretroshare/src/pqi/authssl.cc
libretroshare/src/pqi/p3connmgr.cc
libretroshare/src/pqi/p3connmgr.h
libretroshare/src/services/p3disc.cc
3149: removed uninitialized memory read
libretroshare/src/pqi/authgpg.cc
3151: corrected missed update of peer info when connected. Disabled setting
peer connexion IP from p3disc info (does not make sense, and leads to
errors)
libretroshare/src/services/p3disc.cc
git-svn-id: http://svn.code.sf.net/p/retroshare/code/trunk@3152 b45a01b8-16f6-495d-af2f-9b41ad6348cc
- memory leak -> "RsItem* item" was not freed, when "dynamic_cast<RsStatusItem*>" failed
- optimized return of std::list as parameter and not as return. return will copy the list and its not necessary
p3StatusService::getStatus
- memory leak -> items in "std::list<RsStatusItem* > status_items" was not freed
- potential crash, when receiving a status for an unknown peer
p3Peers::getPeerDetails
- optimized - call to "AuthSSL::getAuthSSL()->OwnId()" only once
- optimized - add ip addresses directly to "d.ipAddressList"
PeersDialog::insertPeers
- fixed possible crash, when ssl child has disappeared and was removed from tree, there was a missing continue
git-svn-id: http://svn.code.sf.net/p/retroshare/code/trunk@3125 b45a01b8-16f6-495d-af2f-9b41ad6348cc
- memory leaks in pqi/cleanupxpgp.cc , 2 new char[] => 2 delete[]
- reordering some constructors' initializing order
- char* myString = "foo" constructs must be prefixed by "const"
- using size_t for variable types when dealing with STL
git-svn-id: http://svn.code.sf.net/p/retroshare/code/trunk@3079 b45a01b8-16f6-495d-af2f-9b41ad6348cc
3068: added verification for file size computation (bug correction)
3069: set heartbeat values to intermediate values
3070: suppressed uninitialised memory read
3071: automatic removal of file lists from deleted peers, at restart (After
double check that this does not alter exchange of file lists in any way)
git-svn-id: http://svn.code.sf.net/p/retroshare/code/trunk@3072 b45a01b8-16f6-495d-af2f-9b41ad6348cc
This avoids that an attacker that captures a broadcast hash request can also ask for the file.
This needed to add back explicit sources in SearchDialog and private chat transfer. I dynamically search
for sources in file lists just before calling FileRequest.
When RS links anchorClick() will work properly with Qt, we can remove the search flag "EXTRA" from the
tunnel digging in p3turtle.cc, otherwise, people having this bug can't transfer files in private chat by
copy+paste of a RS link.
Also:
- added missing mutexes in search requests into fimonitor.cc
- suppressed some debug info in connect manager
- added check for write fails when dumping config files
git-svn-id: http://svn.code.sf.net/p/retroshare/code/trunk@3027 b45a01b8-16f6-495d-af2f-9b41ad6348cc
- added failure tests for fwrite. Some where missing.
- added a test against the IP 1.0.0.0, which pops up on MacOS (when the peer is not connected to the internet?)
- put some additional debug messages.
git-svn-id: http://svn.code.sf.net/p/retroshare/code/trunk@3018 b45a01b8-16f6-495d-af2f-9b41ad6348cc
2951: cleaned up some desastrous code in rsdiscitems.cc
2952: put back an exit when the local address+port are already in use.
Otherwise this corrupts file lists, config files etc.
git-svn-id: http://svn.code.sf.net/p/retroshare/code/trunk@2953 b45a01b8-16f6-495d-af2f-9b41ad6348cc
The problem was that libretroshare handles files in UTF-8 but Windows's ANSI/POSIX C functions automatically assume that the char* parameters are encoded with the system's code page. There is no way to set that code page as UTF-8. So now under Windows the code translates the file name to UTF-16 before feeding it to one of the Unicode functions (they are usually prefixed or suffixed by 'w'). Please note that it is not very efficient.
Furthermore, Windows does not provide a Unicode version of opendir/readdir/closedir, so it was necessary to use FindFirstFileW/FindNextFileW/FindClose which has a different behaviour as well as different structures. The FolderIterator class was created in order to mimic the Unix way of traversing folders contents. Hence the algorithm is unchanged and the systems differences masked.
As it was necessary to use some functions from the Windows API, <windows.h> had to be included in a few files were it didn't appear before, creating macros and #define conflicts. In order to solve them, util/rswin.h must be included first in a file (if necessary). Otherwise the preprocessor will fail on purpose to avoid the code being compiled with different _WIN32_WINNT values.
As another side-effect, rstlvutil.h and rstlvutil.cc have been removed from libretroshare.pro file. They are only used by testing units and include util/utest.h which defines a macro FAILED that already exists in <windows.h>. I don't know if unit tests are still in use and I don't plan on coding often on Windows, so I'll leave that as an exercise (hot potato?) to a motivated fellow Windows programmer.
git-svn-id: http://svn.code.sf.net/p/retroshare/code/trunk@2924 b45a01b8-16f6-495d-af2f-9b41ad6348cc
pqi/authgpg.cc:
- remove French comment (with nasty non-unicode characters)
- use std::cerr instead of fprintf
tcponudp/extaddrfinder.cc:
- initialize correctly the sockaddr_in, former code wouldn't pad sin_zero
(which is required by the standard)
git-svn-id: http://svn.code.sf.net/p/retroshare/code/trunk@2909 b45a01b8-16f6-495d-af2f-9b41ad6348cc
Now used in MainWindow.cpp, MessagesDialog.cpp and peerstatus.cpp
void p3Peers::getPeerCount (unsigned int *pnFriendCount, unsigned int *pnOnlineCount);
void p3Msgs::getMessageCount(unsigned int *pnInbox, unsigned int *pnInboxNew, unsigned int *pnOutbox, unsigned int *pnDraftbox, unsigned int *pnSentbox);
git-svn-id: http://svn.code.sf.net/p/retroshare/code/trunk@2898 b45a01b8-16f6-495d-af2f-9b41ad6348cc
- ftController::copyFile -> buffer and file pointer leaks in case of error
- PeersDialog::insertSendList -> new QTreeWidgetItem for all online peers, this function is not ready yet
- PeersDialog::insertPeers -> gpg_item = new QTreeWidgetItem(0); in case of no more accept connection
- pqissl::reset -> missing SSL_free of ssl_connection
Missing return:
- IntroPage::nextId
git-svn-id: http://svn.code.sf.net/p/retroshare/code/trunk@2891 b45a01b8-16f6-495d-af2f-9b41ad6348cc
RetroShare checks for locale gpg.exe and gpgme-w32spawn.exe and if exists, it starts as portable version.
Modified version of libgpgme-11.dll needed.
git-svn-id: http://svn.code.sf.net/p/retroshare/code/trunk@2815 b45a01b8-16f6-495d-af2f-9b41ad6348cc
- call back function did not pass prev_was_bad as parameter
to gui/qtnotify function which requests password
git-svn-id: http://svn.code.sf.net/p/retroshare/code/trunk@2738 b45a01b8-16f6-495d-af2f-9b41ad6348cc
- essentially if any part of the file saving procedure fails, there should be config files whose signatures/hash match up
git-svn-id: http://svn.code.sf.net/p/retroshare/code/trunk@2476 b45a01b8-16f6-495d-af2f-9b41ad6348cc
1) b64.c used c++ functions -> b64.cc
2) OSX will use miniupnpc for now -> modified #defines.
3) change in openssl fn signature?
4) updated build file for OSX.
git-svn-id: http://svn.code.sf.net/p/retroshare/code/trunk@2344 b45a01b8-16f6-495d-af2f-9b41ad6348cc
Redesign the udp connection
Remove the rsiface duplicates from retroshare-gui.
Add some randomness in timings for connect manager
Merge branch 'connectionTunneling'
Conflicts:
libretroshare/src/libretroshare.pro
libretroshare/src/pqi/p3connmgr.cc
retroshare-gui/src/RetroShare.pro
retroshare-gui/src/rsiface/rsfiles.h
retroshare-gui/src/rsiface/rstypes.h
git-svn-id: http://svn.code.sf.net/p/retroshare/code/trunk@1867 b45a01b8-16f6-495d-af2f-9b41ad6348cc
* Modified tlvitems to support future expansions.
* added random tlv test functios.
* added dummy Wide Directory functions to rsdir (for the future;)
* Fixed Mutex Bug in fimonitor.
* added netiface_test for hiberation / net change testing.
git-svn-id: http://svn.code.sf.net/p/retroshare/code/trunk@1620 b45a01b8-16f6-495d-af2f-9b41ad6348cc
- added a console in config->server->F2F routing to be able to visualize turtle routing statistics
WARNING: this is not complete yet. The fllowing still needs to be done:
- detect duplicates in search results between turtle and friends search
- RegExpr search does ot work with turtle (still to code).
- search does not search own files. Is this really needed after all ?
git-svn-id: http://svn.code.sf.net/p/retroshare/code/trunk@1540 b45a01b8-16f6-495d-af2f-9b41ad6348cc
* Modified bind calls to attach to 0.0.0.0:XXXX instead of specific
IP:Port combinations. This will help connectivity when RS chooses
the wrong interface.
* These changes are within #defines so they can be easily reverted.
git-svn-id: http://svn.code.sf.net/p/retroshare/code/trunk@1498 b45a01b8-16f6-495d-af2f-9b41ad6348cc
* Stun code now runs continually - to check external network state.
* Udpsorter controls DHT stun is on/off. (via p3ConnectMgr)
* added code to enable threads to join/restart
* enabled NetRestart for UDP and TCP.
* tweaked networking code for faster startup (now ~30 seconds - can still be improved).
* tweaked debug messages for testing networking
* Added test for checking external IP address determination.
git-svn-id: http://svn.code.sf.net/p/retroshare/code/trunk@1492 b45a01b8-16f6-495d-af2f-9b41ad6348cc
* supports Multiple Accounts on same computer.
* Enabled libretroshare tests using Makefiles.
* restructured RsInit functions: Config Data is now private.
* switch OpenPGP on by default (added #define to rsinit).
git-svn-id: http://svn.code.sf.net/p/retroshare/code/trunk@1451 b45a01b8-16f6-495d-af2f-9b41ad6348cc
* added rsinit.h include so PGPSSL flag is read. (enabling ISSUER sharing)
* extra debugging so we can see the certs being passed around.
git-svn-id: http://svn.code.sf.net/p/retroshare/code/trunk@1399 b45a01b8-16f6-495d-af2f-9b41ad6348cc
* p3disc now exchanges "Issuer" (pgp) certificates as well.
* additional types for rsdiscitems.h
* Bug Fix for NULL packet in p3service.cc
* allow unauthed SSL certificates to be added in AuthSSL - otherwise cant add new friends!
* only save authed SSL certificates.
* fixed ref/unref of PGP keys in AuthGPG
* added Mutex protection to AuthGPG
* added PGP reloading when key is imported, or signed.
* Fixed PGP key signing.
* added Additional field validLvl to RsPeerDetails.
git-svn-id: http://svn.code.sf.net/p/retroshare/code/trunk@1270 b45a01b8-16f6-495d-af2f-9b41ad6348cc
This is not enabled by default. Instructions to enable are at the end of msg.
This is 60% complete. Supports creation of certificates, adding friends and connections.
Parts still to do: pgpids, p3discovery, signing and trusting peers.
The main reason it is being commited is so that connections between peers can be
properly tested, and development on OSX and win can start.
This requires gpg and the gpgme.h development libraries, and no longer
requires the custom ssl libraries.
To compile it switch the configuration flags in scripts/config-linux.mk
To compile XPGP (v0.4.x) enable PQI_USE_XPGP:
#PQI_USE_SSLONLY = 1
PQI_USE_XPGP = 1
To compile SSL only, enable PQI_USE_SSLONLY:
PQI_USE_SSLONLY = 1
#PQI_USE_XPGP = 1
To compile OpenPGP, disable both:
#PQI_USE_SSLONLY = 1
#PQI_USE_XPGP = 1
and enable RS_USEPGPSSL in rsiface/rsinit.h
git-svn-id: http://svn.code.sf.net/p/retroshare/code/trunk@1265 b45a01b8-16f6-495d-af2f-9b41ad6348cc
RsItem Packets.... but used an alterative streamer similar to pqiarchive.
This will cause problems, and delete the configuration for those
who have upgraded in the last month .... but will maintain compatibility
with previous stable release.
git-svn-id: http://svn.code.sf.net/p/retroshare/code/trunk@1201 b45a01b8-16f6-495d-af2f-9b41ad6348cc
Once completed this will allow standard ssl authentication and provide the base for
the openpgp authenticator,
* Tweaks, and removed debug statements.
git-svn-id: http://svn.code.sf.net/p/retroshare/code/trunk@1140 b45a01b8-16f6-495d-af2f-9b41ad6348cc
- added a checkbox to control the use of external servers for ip determination.
- put back Network on the left
- put channels out of RS_RELEASE_VERSION, as it's not working yet.
- NetworkDialog:
- set the info in columns about trust to be more explicit
- changed dark green into light green to comply with colors in the trust matrix (it's also more readable in light green)
- corrected trust strings that appeared in the Last Contact column
- changed "generate certificate" in connect friends wizard into "export my certificate..." which is more appropriate
git-svn-id: http://svn.code.sf.net/p/retroshare/code/trunk@1113 b45a01b8-16f6-495d-af2f-9b41ad6348cc
additional functionality in other places, including:
* add Sign / Verify functions to authxpgp
* sign/verify messages, and control flags for p3distrib/p3forums.
* add authmgr to p3distrib etc.
* added AUTH flags to rsforums interface.
git-svn-id: http://svn.code.sf.net/p/retroshare/code/trunk@867 b45a01b8-16f6-495d-af2f-9b41ad6348cc
this provides the new GPG implementation
added API to store all GPG keys in a map
added APIs to get GPG certificate IDs
added APIs to get Details from the Certificates
git-svn-id: http://svn.code.sf.net/p/retroshare/code/trunk@839 b45a01b8-16f6-495d-af2f-9b41ad6348cc
* Fixed Online and Message Toaster to look bether .
* Update stylesheets for bold fonts for Subject,From,Date,To, Subject Text
* Set for From Text Label Blue font.
git-svn-id: http://svn.code.sf.net/p/retroshare/code/trunk@814 b45a01b8-16f6-495d-af2f-9b41ad6348cc
* Enabled config in p3file-startup.cc
* Enabled resumeTransfers
* Added new RsFileConfigItem to serialiser.
* extended ftFiMonitor to use Configuration.
* bug fix to add/remove Shared Dirs.
* Increased Channel/forum periods to 3/12 months.
git-svn-id: http://svn.code.sf.net/p/retroshare/code/trunk@806 b45a01b8-16f6-495d-af2f-9b41ad6348cc
build against a standard OpenSSL library...
Still lots to do (implement AuthSSL), compiles all but final gui.
use USE_XPGP flag in build script to control it.
git-svn-id: http://svn.code.sf.net/p/retroshare/code/trunk@796 b45a01b8-16f6-495d-af2f-9b41ad6348cc
NB: This is not yet working. so SVN is now officially broken :(
Hope to have the bugs ironed out soon.
git-svn-id: http://svn.code.sf.net/p/retroshare/code/trunk@782 b45a01b8-16f6-495d-af2f-9b41ad6348cc
* Added call to function when loading certificate from a string.
(ie when the user cut n pastes it).
* added return 1 call to pqipersongrp.cc
git-svn-id: http://svn.code.sf.net/p/retroshare/code/trunk@714 b45a01b8-16f6-495d-af2f-9b41ad6348cc
* Made ftTransferModule compile.
* bugfixes to make ftserver1test work.
* New P3Pipe / P3Hub ...
* Added Test Notes.
* First functions added to ftcontroller
* added isOnline to p3ConnectMgr.
git-svn-id: http://svn.code.sf.net/p/retroshare/code/trunk@698 b45a01b8-16f6-495d-af2f-9b41ad6348cc
* Created pqiNetAssist interfaces for DHT and UPnP.
* Created PQIHub etc for standalone testing (in ft/pqitestor.h for now).
* Add basics of first server test ... its not quite complete yet.
* Improvements to ftserver.
* Changes to many tests to match other mods.
git-svn-id: http://svn.code.sf.net/p/retroshare/code/trunk@689 b45a01b8-16f6-495d-af2f-9b41ad6348cc
* Switched off most of std::cerr output. (expect UPnP)
* moved pqi/pqidebug to util/rsdebug to allow greater usage.
* added Mutexes to logging.
* Downgraded many log messages to DEBUG.
* New Log messages for connections, dht and udp code.
* Added check for bad UDP socket.
* Added check for non-firewalled scenario.
* Increased Storage period from 1 Month to 6 Months for Links & Blog.
git-svn-id: http://svn.code.sf.net/p/retroshare/code/trunk@644 b45a01b8-16f6-495d-af2f-9b41ad6348cc
* Disabled newsFeed for failed connection and disconnect.
* Switched interface file_size to 64 bits for larger files.
* Flagged distrib groups as changed when subscribe request is processed.
git-svn-id: http://svn.code.sf.net/p/retroshare/code/trunk@634 b45a01b8-16f6-495d-af2f-9b41ad6348cc
* Addition of channels serialiser.
* New channels interface.
* Added Channels to startup code.
* New CFG Id for serialiser.
* Cleanup of old channels stuff from interfaces.
* Cleanup of messages as well.
* Changed file size to uint64_t
git-svn-id: http://svn.code.sf.net/p/retroshare/code/trunk@620 b45a01b8-16f6-495d-af2f-9b41ad6348cc
* added interface to rsnotify/p3notify/pqinotify
* added getForumInfo() to forum interface.
* added virtual functions to p3distrib for event feedback.
New NewsFeed Notification.
* Peer Connection/Disconnection.
* Failed Certificate connection.
* New/Updated Forums and Forum Msgs.
git-svn-id: http://svn.code.sf.net/p/retroshare/code/trunk@616 b45a01b8-16f6-495d-af2f-9b41ad6348cc
Various improvements to get p3distrib Messages working:
* Defensive programming in cachestrapper (forcing ownId on save).
* Changed CONFIG_CACHE_ID to last -> to force correct loading order at startup
This should be Config Files, Local Cache Files, then Remote Caches.
* Hack to maintain existing Cache Files.
* Improvments to forum_test.
Lots of work on p3distrib:
* fixed nextCacheSubId.
* Added new Msgs to Config Save.
* Fixed Cache reload issues.
* Overall: Enabled Forum Msg publication.
git-svn-id: http://svn.code.sf.net/p/retroshare/code/trunk@611 b45a01b8-16f6-495d-af2f-9b41ad6348cc
* Added Forum ID to configuration Manager.
* added proper startup for p3Forums.
* updated forums/distrib interfaces.
* Switch Auto-Login on by default.
* switched out lots of debugging.
* add RM libretroshare.a to top-level Makefile.
git-svn-id: http://svn.code.sf.net/p/retroshare/code/trunk@594 b45a01b8-16f6-495d-af2f-9b41ad6348cc
* implementation of p3config, cache functionality to p3Qblog
* added peerid (pid) attribute to rsQblog item and its serialisation
* TODO: logical updating for p3Qblog
* TODO: implement tick() so can add to server
* TODO: test p3Qblog after addition of tick with some peers
git-svn-id: http://svn.code.sf.net/p/retroshare/code/trunk@571 b45a01b8-16f6-495d-af2f-9b41ad6348cc
* Added Anonymous links, stored in configuration file.
* Friends recommendations are also shared anonymously with peers.
* Own recommendations are shared with friends.
* TODO include ranking (+2 <-> -2) in score.
* some bugfixes too.
Added RandomId to p3service file.
Improved forum interface.
Added dummy forum system (not transmitted) for testing.
Switched on new features as well.
git-svn-id: http://svn.code.sf.net/p/retroshare/code/trunk@505 b45a01b8-16f6-495d-af2f-9b41ad6348cc
* Removed periodic Check and thread.
* Added Shutdown.
* switched to terminating background thread.
* removed temporary lease.
* A bit of a HACK - this class could be cleaned up significantly.
Adding the start of forums/channels.
* Dummy Interface and Forum data (so GUI work can start)
* rough p3distrib - needs a lot of work.
Added shutdown function to p3connmgr, to shutdown Upnp.
git-svn-id: http://svn.code.sf.net/p/retroshare/code/trunk@493 b45a01b8-16f6-495d-af2f-9b41ad6348cc
* Fixed up Variable Ticking -> max = 1.0 sec now.
* Removed debug output which was massively increasing CPU load.
* Removed some old code from p3face-server.cc
git-svn-id: http://svn.code.sf.net/p/retroshare/code/trunk@461 b45a01b8-16f6-495d-af2f-9b41ad6348cc
* Switched p3Ranking to share Friends Links as well as own.
* Modified rankmsgs to contain source id.
* Fixed up rsNotify, added pqiNotify and global function call to get it.
* Added notify for Bad Incoming Directory
* Added Emergency Incoming directory so RS can keep running.
* Added notify for Bad Packet (connecting to V0.3.X)
* Added notify for Incomplete Packet Read (not been triggered yet!)
* added close() to BinInterface, close on pqissl calls reset()
* removed exit(1) calls from pqistreamer, replaced with bio->close().
* Increased Maximum Packet Size for HTML messages.
* Fixed Online/Offline Message Forwarding. (TEST).
* Increased DHT bootstrap buckets to 4.
* Cleaned up much of serialiser debug (was slowing down Mac)
* Added directory path to File Listings.
* added ConvertSharedFilePath() so correct local dir can be found.
* Added ForceDirectoryCheck() and InDirectoryCheck() for file hashing.
* removed old TMP cache loading.
* switched off Cache debug.
git-svn-id: http://svn.code.sf.net/p/retroshare/code/trunk@448 b45a01b8-16f6-495d-af2f-9b41ad6348cc
* Switched to miniupnpc-1.0
* modified miniupnpc to add lease duration.
* set lease duration to 1 Hr.
* Modified configure scripts to use miniupnpc-1.0
* added TIMEOUT to all connections (5 sec for TCP - Important!)
* reduced TCP offset delay to 2 seconds.
* BUGFIX: Added missing connect_parameter wrapper function.
* added reset to other connection methods when connection is made.
* Added Connection Type (TCP/UDP) information to feedback/GUI
* Increased default Data Rates: from 50/50 to 100/500 kB/s
* Removed Default Bootstrap Ids. (only automatic now!)
git-svn-id: http://svn.code.sf.net/p/retroshare/code/trunk@423 b45a01b8-16f6-495d-af2f-9b41ad6348cc
An invalid comparison was being made - meaning the EXT_PORT_FLAG was not set.
This can lead to failed connection attempts.
Added dht_check_peers program.
git-svn-id: http://svn.code.sf.net/p/retroshare/code/trunk@409 b45a01b8-16f6-495d-af2f-9b41ad6348cc
* hashed keys are posted to specific DHT entries, to create a series of bootstrap lists.
* these are fetched as needed to bootstrap new clients.
* Modified Bootstrap monitor program.
Created a minimal backup bootstrap list (temporary)
Added "-e" option to commandline to force 'external port' mode
Bugfix for multiple connection methods, could kill an active connection.
git-svn-id: http://svn.code.sf.net/p/retroshare/code/trunk@397 b45a01b8-16f6-495d-af2f-9b41ad6348cc
(1) xpgp_id to extract the name/id from a certificate.
(2) dht_bootstrap to check the status of the bootstrap peers.
Various bits of code needed to be rearranged to make these utilities possible.
git-svn-id: http://svn.code.sf.net/p/retroshare/code/trunk@394 b45a01b8-16f6-495d-af2f-9b41ad6348cc
* searching for STUN ID's continues until RS_STUN_FOUND_MIN are found (10).
* abandon STUN search if Ext or Upnp mode.
* add Bootstrap IDs to rear of mStunList. (bugfix)
Force saving of certificates after "oldFormat" loading.
Corrected printStunList() fn call.
Added a notification system:
(1) libretroshare System Notifications.
- System notification if Firewall Status is bad.
(2) PopUp messages.
- Popup for a connected peer.
- Popup for a new message.
* New interface (to be revised).
git-svn-id: http://svn.code.sf.net/p/retroshare/code/trunk@376 b45a01b8-16f6-495d-af2f-9b41ad6348cc
* Switched on RELEASE flag.
* renamed incomplete work to "Unfinished"
* updated version strings.
* Added Configuration path to DhtMgr.
* reduced uPnP timeout to 30 seconds (from 60).
* more Bin -> BinToHex printouts.
git-svn-id: http://svn.code.sf.net/p/retroshare/code/trunk@373 b45a01b8-16f6-495d-af2f-9b41ad6348cc
Most of these changes relate to:
(1) rand() is different
(2) sleep() don't exist on Windows.
(3) networking headers are different - these need to be cleaned up in general.
(4) disabled tests that won't compile on Windows.
Will probably have to rollback some of these changes for Unix later.
git-svn-id: http://svn.code.sf.net/p/retroshare/code/trunk@372 b45a01b8-16f6-495d-af2f-9b41ad6348cc
* Fixed the fonts, and default entries in GamesLauncher.
* Shifted all the unfinished stuff to "In Development" section.
* Fixed smplayer/rs project files.
* duplicate variable in p3connmgr.
git-svn-id: http://svn.code.sf.net/p/retroshare/code/trunk@371 b45a01b8-16f6-495d-af2f-9b41ad6348cc
* Added stun bootstrap functionality.
* Added in two temporary StunServers.
* Reconnect attempts are TCP only.
* enabled AUTOCONNECT and TCP Connections.
* reduced UDP keepAlive timer to 15 secs.
* made UPnP the default startup behaviour.
* Removed StunId raw printouts -> now use BinToHex()
* Unified TTLS and PERIODS in p3dhtmgr.h
* DHT bugfix (data not passed to ConnMgr).
git-svn-id: http://svn.code.sf.net/p/retroshare/code/trunk@370 b45a01b8-16f6-495d-af2f-9b41ad6348cc
* Added GUI interface for auto connect state.
* Added HTTP retrieval and storage of DHT peers update.
* Added code for partial recv() from DHT peers.
* Disabled Chat/Disc/Udplayer/tcpstream debug output.
* Added Unreachable Check to connMgr.
* Added auto reconnect functions to connMgr (#define to disable).
* Restructured DHT notify code... much cleaner.
* DHT now flags out of date DHT results.
* DHT notifies ConnMgr on any results (same or diff).
* Added Fns to cleanup old udp connection.
* other bugfixes.
git-svn-id: http://svn.code.sf.net/p/retroshare/code/trunk@369 b45a01b8-16f6-495d-af2f-9b41ad6348cc
* Enabled a lease duration (requires mods to miniupnpc library)
* this is set at 10 mins for the moment.
* Added Check functions to see if UPnP forwarding is still up.
* improved error checking in Forward() function.
* added #define for UDP local address testing.
git-svn-id: http://svn.code.sf.net/p/retroshare/code/trunk@359 b45a01b8-16f6-495d-af2f-9b41ad6348cc
* Added Period and Delay parameters to connections.
- Delay is used to avoid simultaneous TCP connections.
- Period is used to regulate UDP connections.
* added Delay code to pqissl.
* added Period code to tcponudp / pqissludp.
* modified TTL modification code.
* increased SynPktRetransmit value.
* fixed retrans() timeout (one reason code wasn't working before!)
* fixed tou_close() SEGV bug.
* modified pqissludp tou_socket creation. (non permanent now).
* Modified format of peerConnectRequest() CB to make it more useful and rewrote function.
* Enabled pqissludp NetInterface.
* using Id comparision to determine Active/Passive UDP connection state.
* added #def to disable TCP connections. (for testing)
* enabled UDP connections from retryConnect() function.
* corrected EXT check in retryConnect() function.
* + lots of debug output and other stuff.
git-svn-id: http://svn.code.sf.net/p/retroshare/code/trunk@358 b45a01b8-16f6-495d-af2f-9b41ad6348cc
Added a Type parameter, so that the connection Mgr can determine if there is
an external port available or not.
git-svn-id: http://svn.code.sf.net/p/retroshare/code/trunk@354 b45a01b8-16f6-495d-af2f-9b41ad6348cc
* Completed CacheConfig serialisation.
* Switched to Push Cache Mode (faster and more efficient).
* Added CancelCacheTransfer() if we have duplicate HASH / CACHEID.
* Store remote and local caches.
* cleanup all cache directories.
* Broke Cache tests :( - because of dependency of mAuthMgr/mConnMgr.
git-svn-id: http://svn.code.sf.net/p/retroshare/code/trunk@343 b45a01b8-16f6-495d-af2f-9b41ad6348cc
* bool / int mismatch bug in tou_extaddr()
* extra debugging to p3connmgr
* fixed connect error in p3connmgr.
git-svn-id: http://svn.code.sf.net/p/retroshare/code/trunk@342 b45a01b8-16f6-495d-af2f-9b41ad6348cc
* Added read/writetofile() fns to BinMemInterface
* Added SignData() fns to AuthXPGP.
* Added Certificate saving to AuthXPGP.
* added Signatures to Configuration.
* now discards messages if Hash is wrong (p3msgservice)
git-svn-id: http://svn.code.sf.net/p/retroshare/code/trunk@341 b45a01b8-16f6-495d-af2f-9b41ad6348cc
* added serialiser types.
* finished streaming on p3ranking.
* removed Bandwidth limitations from BinFile / BinMem.
* added bytecount() to BinInterface.
* moved the CacheTransfer creation to Startup.
* added ranking to CacheStrapper & server tick() system.
* Tweaked LinksDialog for final touches.
* enabled downloads from Messages.
git-svn-id: http://svn.code.sf.net/p/retroshare/code/trunk@335 b45a01b8-16f6-495d-af2f-9b41ad6348cc
* added sockaddr_clear() function to zero network addresses before use.
* used this function in p3connmgr.
* added htonll() and ntohll() functions to rsnet.h with compile-time ENDIAN checking
* use htonll() and ntohll() in serialiser.
* added net_test.cc to check network/endian/inet_addr issues.
git-svn-id: http://svn.code.sf.net/p/retroshare/code/trunk@328 b45a01b8-16f6-495d-af2f-9b41ad6348cc
* Major modifications to p3disc to use the new AuthMgr and ConnMgr.
* Modified RsDiscItems to match new p3disc.
* Modified ConnMgr to accept information from p3disc.
* Addition of new Load/Save Certificate From/To Binary to AuthMgr.
* Corrected default build to Linux.
git-svn-id: http://svn.code.sf.net/p/retroshare/code/trunk@325 b45a01b8-16f6-495d-af2f-9b41ad6348cc
* minor changes to networking headers.
* addition of several virtual destructors (remove warnings)
* switched Makefiles to new system.
* added macosx specific configuration file.
* removed KadC compilation checks.
git-svn-id: http://svn.code.sf.net/p/retroshare/code/trunk@324 b45a01b8-16f6-495d-af2f-9b41ad6348cc
* Added new XPGP functions to checking certificates.
* Converted SSL classes from cert * -> p3AuthMgr.
* Added check of addresses before connect attempt.
* started up listener correctly.
git-svn-id: http://svn.code.sf.net/p/retroshare/code/trunk@319 b45a01b8-16f6-495d-af2f-9b41ad6348cc
the rewrite of the retroshare core networking stack.
This check-in commits the changes to the pqi code,
and provides the majority of the improvements.
(1) Introduced new interfaces for DHT and UPnP abstraction: p3dhtmgr.h, p3upnpmgr.h
(2) Introduces abstraction for Authentication: p3authmgr.h
(3) New Connection Manager to coordinate networking code: p3connmgr.h
(4) New Configuration Manager: p3cfgmgr.h
This library has been significantly modified to support DHT synced connections
to enable connections between Firewalled Friends. The connection code has
been rewritten within a new framework, which should make extensions easier to code.
Also removed significant amount of old code relating to Tunnels, Channels etc.
This will be recycled later as higher level services that should not be
part of the core networking library.
git-svn-id: http://svn.code.sf.net/p/retroshare/code/trunk@306 b45a01b8-16f6-495d-af2f-9b41ad6348cc
* New external interface for launcher (rsiface/rsgame.h)
* changed pqiservice type Ids from int -> uint32_t.
* added NO_DELETE option to pqistreamer.
* added HASHDATA flag for BinInterfaces
git-svn-id: http://svn.code.sf.net/p/retroshare/code/trunk@301 b45a01b8-16f6-495d-af2f-9b41ad6348cc
- Added new serialiser (PQItem -> RsItem), removed old one.
- switched packet sorting from ChanId (array of ids) to PeerId (string)
- introduced cleaner service interface (pqiservice).
- moved p3disc to service interface.
- modified streamers to use the new serialiser.
- moved msg/chat to service interface.
- removed old source code. (supernode / p3loopback).
I've disabled UDP connections / Proxy and Channels for the moment.
The code it still here, but is not compiled. The Proxy and Channels
will become services, and the UDP connections will be reworked
in the near future.
git-svn-id: http://svn.code.sf.net/p/retroshare/code/trunk@274 b45a01b8-16f6-495d-af2f-9b41ad6348cc
