This caused the freezing on many people PCs. It happened if
(1) Networking was set to Automatic.
(2) UPnP was not available.
But its fixed now!
git-svn-id: http://svn.code.sf.net/p/retroshare/code/trunk@513 b45a01b8-16f6-495d-af2f-9b41ad6348cc
* Added Anonymous links, stored in configuration file.
* Friends recommendations are also shared anonymously with peers.
* Own recommendations are shared with friends.
* TODO include ranking (+2 <-> -2) in score.
* some bugfixes too.
Added RandomId to p3service file.
Improved forum interface.
Added dummy forum system (not transmitted) for testing.
Switched on new features as well.
git-svn-id: http://svn.code.sf.net/p/retroshare/code/trunk@505 b45a01b8-16f6-495d-af2f-9b41ad6348cc
* Removed periodic Check and thread.
* Added Shutdown.
* switched to terminating background thread.
* removed temporary lease.
* A bit of a HACK - this class could be cleaned up significantly.
Adding the start of forums/channels.
* Dummy Interface and Forum data (so GUI work can start)
* rough p3distrib - needs a lot of work.
Added shutdown function to p3connmgr, to shutdown Upnp.
git-svn-id: http://svn.code.sf.net/p/retroshare/code/trunk@493 b45a01b8-16f6-495d-af2f-9b41ad6348cc
* Fixed up Variable Ticking -> max = 1.0 sec now.
* Removed debug output which was massively increasing CPU load.
* Removed some old code from p3face-server.cc
git-svn-id: http://svn.code.sf.net/p/retroshare/code/trunk@461 b45a01b8-16f6-495d-af2f-9b41ad6348cc
* Switched p3Ranking to share Friends Links as well as own.
* Modified rankmsgs to contain source id.
* Fixed up rsNotify, added pqiNotify and global function call to get it.
* Added notify for Bad Incoming Directory
* Added Emergency Incoming directory so RS can keep running.
* Added notify for Bad Packet (connecting to V0.3.X)
* Added notify for Incomplete Packet Read (not been triggered yet!)
* added close() to BinInterface, close on pqissl calls reset()
* removed exit(1) calls from pqistreamer, replaced with bio->close().
* Increased Maximum Packet Size for HTML messages.
* Fixed Online/Offline Message Forwarding. (TEST).
* Increased DHT bootstrap buckets to 4.
* Cleaned up much of serialiser debug (was slowing down Mac)
* Added directory path to File Listings.
* added ConvertSharedFilePath() so correct local dir can be found.
* Added ForceDirectoryCheck() and InDirectoryCheck() for file hashing.
* removed old TMP cache loading.
* switched off Cache debug.
git-svn-id: http://svn.code.sf.net/p/retroshare/code/trunk@448 b45a01b8-16f6-495d-af2f-9b41ad6348cc
* Switched to miniupnpc-1.0
* modified miniupnpc to add lease duration.
* set lease duration to 1 Hr.
* Modified configure scripts to use miniupnpc-1.0
* added TIMEOUT to all connections (5 sec for TCP - Important!)
* reduced TCP offset delay to 2 seconds.
* BUGFIX: Added missing connect_parameter wrapper function.
* added reset to other connection methods when connection is made.
* Added Connection Type (TCP/UDP) information to feedback/GUI
* Increased default Data Rates: from 50/50 to 100/500 kB/s
* Removed Default Bootstrap Ids. (only automatic now!)
git-svn-id: http://svn.code.sf.net/p/retroshare/code/trunk@423 b45a01b8-16f6-495d-af2f-9b41ad6348cc
An invalid comparison was being made - meaning the EXT_PORT_FLAG was not set.
This can lead to failed connection attempts.
Added dht_check_peers program.
git-svn-id: http://svn.code.sf.net/p/retroshare/code/trunk@409 b45a01b8-16f6-495d-af2f-9b41ad6348cc
* hashed keys are posted to specific DHT entries, to create a series of bootstrap lists.
* these are fetched as needed to bootstrap new clients.
* Modified Bootstrap monitor program.
Created a minimal backup bootstrap list (temporary)
Added "-e" option to commandline to force 'external port' mode
Bugfix for multiple connection methods, could kill an active connection.
git-svn-id: http://svn.code.sf.net/p/retroshare/code/trunk@397 b45a01b8-16f6-495d-af2f-9b41ad6348cc
(1) xpgp_id to extract the name/id from a certificate.
(2) dht_bootstrap to check the status of the bootstrap peers.
Various bits of code needed to be rearranged to make these utilities possible.
git-svn-id: http://svn.code.sf.net/p/retroshare/code/trunk@394 b45a01b8-16f6-495d-af2f-9b41ad6348cc
Added HashFile() utility function.
Also added updated() functions to ranking and photos, so the GUI can update itself when necessary.
git-svn-id: http://svn.code.sf.net/p/retroshare/code/trunk@381 b45a01b8-16f6-495d-af2f-9b41ad6348cc
* searching for STUN ID's continues until RS_STUN_FOUND_MIN are found (10).
* abandon STUN search if Ext or Upnp mode.
* add Bootstrap IDs to rear of mStunList. (bugfix)
Force saving of certificates after "oldFormat" loading.
Corrected printStunList() fn call.
Added a notification system:
(1) libretroshare System Notifications.
- System notification if Firewall Status is bad.
(2) PopUp messages.
- Popup for a connected peer.
- Popup for a new message.
* New interface (to be revised).
git-svn-id: http://svn.code.sf.net/p/retroshare/code/trunk@376 b45a01b8-16f6-495d-af2f-9b41ad6348cc
(1) A PhotoService / Dialog to share slideshows.
(2) A Network View service, derived from p3disc for a graphical view of peers.
Both of these need a little help to get them fully functional.
git-svn-id: http://svn.code.sf.net/p/retroshare/code/trunk@375 b45a01b8-16f6-495d-af2f-9b41ad6348cc
* Switched on RELEASE flag.
* renamed incomplete work to "Unfinished"
* updated version strings.
* Added Configuration path to DhtMgr.
* reduced uPnP timeout to 30 seconds (from 60).
* more Bin -> BinToHex printouts.
git-svn-id: http://svn.code.sf.net/p/retroshare/code/trunk@373 b45a01b8-16f6-495d-af2f-9b41ad6348cc
Most of these changes relate to:
(1) rand() is different
(2) sleep() don't exist on Windows.
(3) networking headers are different - these need to be cleaned up in general.
(4) disabled tests that won't compile on Windows.
Will probably have to rollback some of these changes for Unix later.
git-svn-id: http://svn.code.sf.net/p/retroshare/code/trunk@372 b45a01b8-16f6-495d-af2f-9b41ad6348cc
* Fixed the fonts, and default entries in GamesLauncher.
* Shifted all the unfinished stuff to "In Development" section.
* Fixed smplayer/rs project files.
* duplicate variable in p3connmgr.
git-svn-id: http://svn.code.sf.net/p/retroshare/code/trunk@371 b45a01b8-16f6-495d-af2f-9b41ad6348cc
* Added stun bootstrap functionality.
* Added in two temporary StunServers.
* Reconnect attempts are TCP only.
* enabled AUTOCONNECT and TCP Connections.
* reduced UDP keepAlive timer to 15 secs.
* made UPnP the default startup behaviour.
* Removed StunId raw printouts -> now use BinToHex()
* Unified TTLS and PERIODS in p3dhtmgr.h
* DHT bugfix (data not passed to ConnMgr).
git-svn-id: http://svn.code.sf.net/p/retroshare/code/trunk@370 b45a01b8-16f6-495d-af2f-9b41ad6348cc
* Added GUI interface for auto connect state.
* Added HTTP retrieval and storage of DHT peers update.
* Added code for partial recv() from DHT peers.
* Disabled Chat/Disc/Udplayer/tcpstream debug output.
* Added Unreachable Check to connMgr.
* Added auto reconnect functions to connMgr (#define to disable).
* Restructured DHT notify code... much cleaner.
* DHT now flags out of date DHT results.
* DHT notifies ConnMgr on any results (same or diff).
* Added Fns to cleanup old udp connection.
* other bugfixes.
git-svn-id: http://svn.code.sf.net/p/retroshare/code/trunk@369 b45a01b8-16f6-495d-af2f-9b41ad6348cc
* Enabled a lease duration (requires mods to miniupnpc library)
* this is set at 10 mins for the moment.
* Added Check functions to see if UPnP forwarding is still up.
* improved error checking in Forward() function.
* added #define for UDP local address testing.
git-svn-id: http://svn.code.sf.net/p/retroshare/code/trunk@359 b45a01b8-16f6-495d-af2f-9b41ad6348cc
* Added Period and Delay parameters to connections.
- Delay is used to avoid simultaneous TCP connections.
- Period is used to regulate UDP connections.
* added Delay code to pqissl.
* added Period code to tcponudp / pqissludp.
* modified TTL modification code.
* increased SynPktRetransmit value.
* fixed retrans() timeout (one reason code wasn't working before!)
* fixed tou_close() SEGV bug.
* modified pqissludp tou_socket creation. (non permanent now).
* Modified format of peerConnectRequest() CB to make it more useful and rewrote function.
* Enabled pqissludp NetInterface.
* using Id comparision to determine Active/Passive UDP connection state.
* added #def to disable TCP connections. (for testing)
* enabled UDP connections from retryConnect() function.
* corrected EXT check in retryConnect() function.
* + lots of debug output and other stuff.
git-svn-id: http://svn.code.sf.net/p/retroshare/code/trunk@358 b45a01b8-16f6-495d-af2f-9b41ad6348cc
Added a Type parameter, so that the connection Mgr can determine if there is
an external port available or not.
git-svn-id: http://svn.code.sf.net/p/retroshare/code/trunk@354 b45a01b8-16f6-495d-af2f-9b41ad6348cc
* Completed CacheConfig serialisation.
* Switched to Push Cache Mode (faster and more efficient).
* Added CancelCacheTransfer() if we have duplicate HASH / CACHEID.
* Store remote and local caches.
* cleanup all cache directories.
* Broke Cache tests :( - because of dependency of mAuthMgr/mConnMgr.
git-svn-id: http://svn.code.sf.net/p/retroshare/code/trunk@343 b45a01b8-16f6-495d-af2f-9b41ad6348cc
* bool / int mismatch bug in tou_extaddr()
* extra debugging to p3connmgr
* fixed connect error in p3connmgr.
git-svn-id: http://svn.code.sf.net/p/retroshare/code/trunk@342 b45a01b8-16f6-495d-af2f-9b41ad6348cc
* Added read/writetofile() fns to BinMemInterface
* Added SignData() fns to AuthXPGP.
* Added Certificate saving to AuthXPGP.
* added Signatures to Configuration.
* now discards messages if Hash is wrong (p3msgservice)
git-svn-id: http://svn.code.sf.net/p/retroshare/code/trunk@341 b45a01b8-16f6-495d-af2f-9b41ad6348cc
* added serialiser types.
* finished streaming on p3ranking.
* removed Bandwidth limitations from BinFile / BinMem.
* added bytecount() to BinInterface.
* moved the CacheTransfer creation to Startup.
* added ranking to CacheStrapper & server tick() system.
* Tweaked LinksDialog for final touches.
* enabled downloads from Messages.
git-svn-id: http://svn.code.sf.net/p/retroshare/code/trunk@335 b45a01b8-16f6-495d-af2f-9b41ad6348cc
* added sockaddr_clear() function to zero network addresses before use.
* used this function in p3connmgr.
* added htonll() and ntohll() functions to rsnet.h with compile-time ENDIAN checking
* use htonll() and ntohll() in serialiser.
* added net_test.cc to check network/endian/inet_addr issues.
git-svn-id: http://svn.code.sf.net/p/retroshare/code/trunk@328 b45a01b8-16f6-495d-af2f-9b41ad6348cc
* Major modifications to p3disc to use the new AuthMgr and ConnMgr.
* Modified RsDiscItems to match new p3disc.
* Modified ConnMgr to accept information from p3disc.
* Addition of new Load/Save Certificate From/To Binary to AuthMgr.
* Corrected default build to Linux.
git-svn-id: http://svn.code.sf.net/p/retroshare/code/trunk@325 b45a01b8-16f6-495d-af2f-9b41ad6348cc
* minor changes to networking headers.
* addition of several virtual destructors (remove warnings)
* switched Makefiles to new system.
* added macosx specific configuration file.
* removed KadC compilation checks.
git-svn-id: http://svn.code.sf.net/p/retroshare/code/trunk@324 b45a01b8-16f6-495d-af2f-9b41ad6348cc
* Added new XPGP functions to checking certificates.
* Converted SSL classes from cert * -> p3AuthMgr.
* Added check of addresses before connect attempt.
* started up listener correctly.
git-svn-id: http://svn.code.sf.net/p/retroshare/code/trunk@319 b45a01b8-16f6-495d-af2f-9b41ad6348cc
the rewrite of the retroshare core networking stack.
This check-in commits the changes to the rsiface code.
Addition of new Retroshare Interface for Peer/Neighbour control.
Mods to notifytxt to use new interface.
git-svn-id: http://svn.code.sf.net/p/retroshare/code/trunk@315 b45a01b8-16f6-495d-af2f-9b41ad6348cc
the rewrite of the retroshare core networking stack.
This check-in commits the changes to the rsserver code.
Major changes to use the new networking code. Added
p3peers.h as a new interface for peer/neighbour management.
git-svn-id: http://svn.code.sf.net/p/retroshare/code/trunk@314 b45a01b8-16f6-495d-af2f-9b41ad6348cc
the rewrite of the retroshare core networking stack.
This check-in commits the changes to the server code.
Changes inline with p3authmgr.h, and conversion of
the configuration storage to p3cfgmgr.h
git-svn-id: http://svn.code.sf.net/p/retroshare/code/trunk@313 b45a01b8-16f6-495d-af2f-9b41ad6348cc
the rewrite of the retroshare core networking stack.
This check-in commits the changes to the serialiser code.
Added serialisation of Key-Value pairs Config message.
git-svn-id: http://svn.code.sf.net/p/retroshare/code/trunk@312 b45a01b8-16f6-495d-af2f-9b41ad6348cc
the rewrite of the retroshare core networking stack.
This check-in commits the changes to the services code.
Modifications to match the switch to p3connmgr.h and p3authmgr.h
git-svn-id: http://svn.code.sf.net/p/retroshare/code/trunk@311 b45a01b8-16f6-495d-af2f-9b41ad6348cc
the rewrite of the retroshare core networking stack.
This check-in commits the changes to the upnp code.
Modifications to use the new generic p3upnpmgr.h interface.
git-svn-id: http://svn.code.sf.net/p/retroshare/code/trunk@310 b45a01b8-16f6-495d-af2f-9b41ad6348cc
the rewrite of the retroshare core networking stack.
This check-in commits the changes to the dht code.
An interface to a second new DHT system (OpenDHT) has been added.
This has a number of features that make it preferable to the KAD dht network.
git-svn-id: http://svn.code.sf.net/p/retroshare/code/trunk@309 b45a01b8-16f6-495d-af2f-9b41ad6348cc
the rewrite of the retroshare core networking stack.
This check-in commits the changes to the util code.
added some more utility functions for HexToBin & Hashing.
git-svn-id: http://svn.code.sf.net/p/retroshare/code/trunk@308 b45a01b8-16f6-495d-af2f-9b41ad6348cc
the rewrite of the retroshare core networking stack.
This check-in commits the changes to the dbase code.
only minor changes:
rename loadCache->loadLocalCache to avoid clash.
switch to new monitoring system in cachestrapper.
git-svn-id: http://svn.code.sf.net/p/retroshare/code/trunk@307 b45a01b8-16f6-495d-af2f-9b41ad6348cc
the rewrite of the retroshare core networking stack.
This check-in commits the changes to the pqi code,
and provides the majority of the improvements.
(1) Introduced new interfaces for DHT and UPnP abstraction: p3dhtmgr.h, p3upnpmgr.h
(2) Introduces abstraction for Authentication: p3authmgr.h
(3) New Connection Manager to coordinate networking code: p3connmgr.h
(4) New Configuration Manager: p3cfgmgr.h
This library has been significantly modified to support DHT synced connections
to enable connections between Firewalled Friends. The connection code has
been rewritten within a new framework, which should make extensions easier to code.
Also removed significant amount of old code relating to Tunnels, Channels etc.
This will be recycled later as higher level services that should not be
part of the core networking library.
git-svn-id: http://svn.code.sf.net/p/retroshare/code/trunk@306 b45a01b8-16f6-495d-af2f-9b41ad6348cc
the rewrite of the retroshare core networking stack.
This check-in commits the changes to the TCPonUCP code.
This library has been significantly modified to support
multiple UDP "connections" from a single port.
This requires some trickery and a listener thread.
Code to "STUN" peers was also added.
git-svn-id: http://svn.code.sf.net/p/retroshare/code/trunk@305 b45a01b8-16f6-495d-af2f-9b41ad6348cc
* New external interface for launcher (rsiface/rsgame.h)
* changed pqiservice type Ids from int -> uint32_t.
* added NO_DELETE option to pqistreamer.
* added HASHDATA flag for BinInterfaces
git-svn-id: http://svn.code.sf.net/p/retroshare/code/trunk@301 b45a01b8-16f6-495d-af2f-9b41ad6348cc
- added Chat / Msg and Disc services.
- expanded rsiface to handle new serialiser.
- mods to rsserver with new conversions etc.
- added service directory to Makefile.
- removed PROXY / CHANNELS from make.opt
git-svn-id: http://svn.code.sf.net/p/retroshare/code/trunk@276 b45a01b8-16f6-495d-af2f-9b41ad6348cc
- Switched to 64 bit lengths for files.
- Switched to new data types (RsItem).
- Moved Msg and Chat to services.
git-svn-id: http://svn.code.sf.net/p/retroshare/code/trunk@275 b45a01b8-16f6-495d-af2f-9b41ad6348cc
- Added new serialiser (PQItem -> RsItem), removed old one.
- switched packet sorting from ChanId (array of ids) to PeerId (string)
- introduced cleaner service interface (pqiservice).
- moved p3disc to service interface.
- modified streamers to use the new serialiser.
- moved msg/chat to service interface.
- removed old source code. (supernode / p3loopback).
I've disabled UDP connections / Proxy and Channels for the moment.
The code it still here, but is not compiled. The Proxy and Channels
will become services, and the UDP connections will be reworked
in the near future.
git-svn-id: http://svn.code.sf.net/p/retroshare/code/trunk@274 b45a01b8-16f6-495d-af2f-9b41ad6348cc
- Switched file sizes from 32bits -> 64 bits so rs can handle large files.
- combined Cache/Service Ids are now located in serialiser/rsserviceids.h
git-svn-id: http://svn.code.sf.net/p/retroshare/code/trunk@273 b45a01b8-16f6-495d-af2f-9b41ad6348cc
This is still a first draft - the message types will surely change.
-corrected ids and added service classes.
-Added disc/msg/chat/cache/file messages
-Extended serialiser to handle service extensions.
-corrected IpAddrPort code.
-More debugging code.
-Added some tests.
git-svn-id: http://svn.code.sf.net/p/retroshare/code/trunk@270 b45a01b8-16f6-495d-af2f-9b41ad6348cc
###
### The commented-out examples below are intended to demonstrate
### how to use this file.
### Section for authentication and authorization customizations.
[auth]
### Set store-passwords to 'no' to avoid storing passwords in the
### auth/ area of your config directory. It defaults to 'yes'.
### Note that this option only prevents saving of *new* passwords;
### it doesn't invalidate existing passwords. (To do that, remove
### the cache files by hand as described in the Subversion book.)
# store-passwords = no
### Set store-auth-creds to 'no' to avoid storing any subversion
### credentials in the auth/ area of your config directory.
### It defaults to 'yes'. Note that this option only prevents
### saving of *new* credentials; it doesn't invalidate existing
### caches. (To do that, remove the cache files by hand.)
# store-auth-creds = no
### Section for configuring external helper applications.
[helpers]
### Set editor to the command used to invoke your text editor.
### This will override the environment variables that Subversion
### examines by default to find this information ($EDITOR,
### et al).
# editor-cmd = editor (vi, emacs, notepad, etc.)
### Set diff-cmd to the absolute path of your 'diff' program.
### This will override the compile-time default, which is to use
### Subversion's internal diff implementation.
# diff-cmd = diff_program (diff, gdiff, etc.)
### Set diff3-cmd to the absolute path of your 'diff3' program.
### This will override the compile-time default, which is to use
### Subversion's internal diff3 implementation.
# diff3-cmd = diff3_program (diff3, gdiff3, etc.)
### Set diff3-has-program-arg to 'true' or 'yes' if your 'diff3'
### program accepts the '--diff-program' option.
# diff3-has-program-arg = [true | false]
### Section for configuring tunnel agents.
[tunnels]
### Configure svn protocol tunnel schemes here. By default, only
### the 'ssh' scheme is defined. You can define other schemes to
### be used with 'svn+scheme://hostname/path' URLs. A scheme
### definition is simply a command, optionally prefixed by an
### environment variable name which can override the command if it
### is defined. The command (or environment variable) may contain
### arguments, using standard shell quoting for arguments with
### spaces. The command will be invoked as:
### <command> <hostname> svnserve -t
### (If the URL includes a username, then the hostname will be
### passed to the tunnel agent as <user>@<hostname>.) If the
### built-in ssh scheme were not predefined, it could be defined
### as:
# ssh = $SVN_SSH ssh
### If you wanted to define a new 'rsh' scheme, to be used with
### 'svn+rsh:' URLs, you could do so as follows:
# rsh = rsh
### Or, if you wanted to specify a full path and arguments:
# rsh = /path/to/rsh -l myusername
### On Windows, if you are specifying a full path to a command,
### use a forward slash (/) or a paired backslash (\\) as the
### path separator. A single backslash will be treated as an
### escape for the following character.
### Section for configuring miscelleneous Subversion options.
[miscellany]
### Set global-ignores to a set of whitespace-delimited globs
### which Subversion will ignore in its 'status' output, and
### while importing or adding files and directories.
# global-ignores = *.o *.lo *.la #*# .*.rej *.rej .*~ *~ .#* .DS_Store
### Set log-encoding to the default encoding for log messages
# log-encoding = latin1
### Set use-commit-times to make checkout/update/switch/revert
### put last-committed timestamps on every file touched.
# use-commit-times = yes
### Set no-unlock to prevent 'svn commit' from automatically
### releasing locks on files.
# no-unlock = yes
### Set enable-auto-props to 'yes' to enable automatic properties
### for 'svn add' and 'svn import', it defaults to 'no'.
### Automatic properties are defined in the section 'auto-props'.
# enable-auto-props = yes
### Section for configuring automatic properties.
[auto-props]
### The format of the entries is:
### file-name-pattern = propname[=value][;propname[=value]...]
### The file-name-pattern can contain wildcards (such as '*' and
### '?'). All entries which match will be applied to the file.
### Note that auto-props functionality must be enabled, which
### is typically done by setting the 'enable-auto-props' option.
# *.c = svn:eol-style=native
# *.cpp = svn:eol-style=native
# *.h = svn:eol-style=native
# *.dsp = svn:eol-style=CRLF
# *.dsw = svn:eol-style=CRLF
# *.sh = svn:eol-style=native;svn:executable
# *.txt = svn:eol-style=native
# *.png = svn:mime-type=image/png
# *.jpg = svn:mime-type=image/jpeg
# Makefile = svn:eol-style=native
git-svn-id: http://svn.code.sf.net/p/retroshare/code/trunk@250 b45a01b8-16f6-495d-af2f-9b41ad6348cc
