RetroShare/plugins/VOIP/lang/VOIP_hu.ts

<?xml version="1.0" ?><!DOCTYPE TS><TS language="hu" version="2.1">
<context>
    <name>AudioInput</name>
    <message>
        <location filename="../gui/AudioInputConfig.ui" line="+17"/>
        <source>Audio Wizard</source>
        <translation>Hang varázsló</translation>
    </message>
    <message>
        <location line="+13"/>
        <source>Transmission</source>
        <translation>Átvitel</translation>
    </message>
    <message>
        <location line="+6"/>
        <source>&amp;Transmit</source>
        <translation>&amp;Küldés</translation>
    </message>
    <message>
        <location line="+10"/>
        <source>When to transmit your speech</source>
        <translation>Mikor küldje a beszédedet</translation>
    </message>
    <message>
        <location line="+3"/>
        <source>&lt;b&gt;This sets when speech should be transmitted.&lt;/b&gt;&lt;br /&gt;&lt;i&gt;Continuous&lt;/i&gt; - All the time&lt;br /&gt;&lt;i&gt;Voice Activity&lt;/i&gt; - When you are speaking clearly.&lt;br /&gt;&lt;i&gt;Push To Talk&lt;/i&gt; - When you hold down the hotkey set under &lt;i&gt;Shortcuts&lt;/i&gt;.</source>
        <translation>&lt;b&gt;Itt állíthatod be a küldés módját.&lt;/b&gt;&lt;br /&gt;&lt;i&gt;Continuous&lt;/i&gt; - Egyfolytában&lt;br /&gt;&lt;i&gt;Hang észlelésekor&lt;/i&gt; - Amikor tisztán érthetően beszélsz.&lt;br /&gt;&lt;i&gt;Gombnyomáskor&lt;/i&gt; - Amikor lenyomva tartod a gyorsbillentyűt &lt;i&gt;Gyorsbillentyűk&lt;/i&gt;.</translation>
    </message>
    <message>
        <location line="+14"/>
        <source>DoublePush Time</source>
        <translation>Dupla gombnyomás gyorsasága</translation>
    </message>
    <message>
        <location line="+10"/>
        <source>If you press the PTT key twice in this time it will get locked.</source>
        <translation>Ha megnyomod a PTT billentyűt kétszer, zárolva lesz.</translation>
    </message>
    <message>
        <location line="+3"/>
        <source>&lt;b&gt;DoublePush Time&lt;/b&gt;&lt;br /&gt;If you press the push-to-talk key twice during the configured interval of time it will be locked. RetroShare will keep transmitting until you hit the key once more to unlock PTT again.</source>
        <translation>&lt;b&gt;Dupla gombnyomás sebessége&lt;/b&gt;&lt;br /&gt;Zárolva lesz, ha a megadott időn belül megnyomod a gombot kétszer. Az átvitel addig folytatódik, amíg meg nem nyomod a billentyűt mégegyszer.</translation>
    </message>
    <message>
        <location line="+43"/>
        <source>Voice &amp;Hold</source>
        <translation>Hang &amp;Megtartás</translation>
    </message>
    <message>
        <location line="+10"/>
        <source>How long to keep transmitting after silence</source>
        <translation>Milyen hosszan tartsa meg az átvitelt egy csendes szakaszt követően</translation>
    </message>
    <message>
        <location line="+3"/>
        <source>&lt;b&gt;This selects how long after a perceived stop in speech transmission should continue.&lt;/b&gt;&lt;br /&gt;Set this higher if your voice breaks up when you speak (seen by a rapidly blinking voice icon next to your name).</source>
        <translation>&lt;b&gt;Ezzel választhatod ki, hogy egy észlelhető szünetet követően meddig kellene az átvitelnek folytatódnia.&lt;/b&gt;&lt;br /&gt;Válassz nagyobb értéket, ha a hangod akadozik beszéd közben (egy gyorsan villogó hang ikonból látni fogod, ami neved mellett található).</translation>
    </message>
    <message>
        <location line="+16"/>
        <source>Silence Below</source>
        <translation>Csend szintje</translation>
    </message>
    <message>
        <location line="+7"/>
        <source>Signal values below this count as silence</source>
        <translation>Az érték alatti részek csendnek számítanak</translation>
    </message>
    <message>
        <location line="+3"/>
        <location line="+32"/>
        <source>&lt;b&gt;This sets the trigger values for voice detection.&lt;/b&gt;&lt;br /&gt;Use this together with the Audio Statistics window to manually tune the trigger values for detecting speech. Input values below &quot;Silence Below&quot; always count as silence. Values above &quot;Speech Above&quot; always count as voice. Values in between will count as voice if you&apos;re already talking, but will not trigger a new detection.</source>
        <translation>&lt;b&gt;Hangok észlelési értékének beállítása.&lt;/b&gt;&lt;br /&gt;Használd a hang statisztikák ablakkal együtt, hogy beállítsd az értékeket a beszéd érzékeléséhez. A &quot;csend szintje&quot; alatti tartomány mindig csendként lesz értelmezve. A &quot;csend szintje&quot; fölötti tartomány mindig beszédnek fog számítani. A kettő közötti értékek abban az esetben számítanak beszédnek, ha már addig is észrevehetően beszéltél.</translation>
    </message>
    <message>
        <location line="-10"/>
        <source>Speech Above</source>
        <translation>Beszélj normálisan</translation>
    </message>
    <message>
        <location line="+7"/>
        <source>Signal values above this count as voice</source>
        <translation>A határ fölötti értékek beszédnek számítanak</translation>
    </message>
    <message>
        <location line="+38"/>
        <source>empty</source>
        <translation>üres</translation>
    </message>
    <message>
        <location line="+17"/>
        <source>Audio Processing</source>
        <translation>Hangfeldolgozás</translation>
    </message>
    <message>
        <location line="+6"/>
        <source>Noise Suppression</source>
        <translation>Zajszűrés</translation>
    </message>
    <message>
        <location line="+13"/>
        <source>Noise suppression</source>
        <translation>Zajszűrés</translation>
    </message>
    <message>
        <location line="+3"/>
        <source>&lt;b&gt;This sets the amount of noise suppression to apply.&lt;/b&gt;&lt;br /&gt;The higher this value, the more aggressively stationary noise will be suppressed.</source>
        <translation>&lt;b&gt;Alkalmazandó zajszűrés mértékének beállítása.&lt;/b&gt;&lt;br /&gt;A magasabb értékkel agresszívabban lesznek szűrve az állandó zajok.</translation>
    </message>
    <message>
        <location line="+32"/>
        <source>Amplification</source>
        <translation>Erősítés</translation>
    </message>
    <message>
        <location line="+10"/>
        <source>Maximum amplification of input sound</source>
        <translation>Bemeneti hangok maximális erősítése</translation>
    </message>
    <message>
        <location line="+3"/>
        <source>&lt;b&gt;Maximum amplification of input.&lt;/b&gt;&lt;br /&gt;RetroShare normalizes the input volume before compressing, and this sets how much it&apos;s allowed to amplify.&lt;br /&gt;The actual level is continually updated based on your current speech pattern, but it will never go above the level specified here.&lt;br /&gt;If the &lt;i&gt;Microphone loudness&lt;/i&gt; level of the audio statistics hover around 100%, you probably want to set this to 2.0 or so, but if, like most people, you are unable to reach 100%, set this to something much higher.&lt;br /&gt;Ideally, set it so &lt;i&gt;Microphone Loudness * Amplification Factor &gt;= 100&lt;/i&gt;, even when you&apos;re speaking really soft.&lt;br /&gt;&lt;br /&gt;Note that there is no harm in setting this to maximum, but RetroShare will start picking up other conversations if you leave it to auto-tune to that level.</source>
        <translation type="unfinished"/>
    </message>
    <message>
        <location line="+32"/>
        <source>Echo Cancellation Processing</source>
        <translation>Visszhang megszűntetése</translation>
    </message>
    <message>
        <location line="+13"/>
        <source>Video Processing</source>
        <translation type="unfinished"/>
    </message>
</context>
<context>
    <name>AudioInputConfig</name>
    <message>
        <location filename="../gui/AudioInputConfig.cpp" line="+115"/>
        <source>Continuous</source>
        <translation>Folyamatos</translation>
    </message>
    <message>
        <location line="+1"/>
        <source>Voice Activity</source>
        <translation>Beszéd észlelése</translation>
    </message>
    <message>
        <location line="+1"/>
        <source>Push To Talk</source>
        <translation>Nyomd meg a beszédhez</translation>
    </message>
    <message>
        <location line="+105"/>
        <source>%1 s</source>
        <translation>%1 m</translation>
    </message>
    <message>
        <location line="+8"/>
        <source>Off</source>
        <translation>Ki</translation>
    </message>
    <message>
        <location line="+3"/>
        <source>-%1 dB</source>
        <translation>-%1 dB</translation>
    </message>
    <message>
        <location filename="../gui/AudioInputConfig.h" line="+75"/>
        <source>VOIP</source>
        <translation>VOIP</translation>
    </message>
</context>
<context>
    <name>AudioStats</name>
    <message>
        <location filename="../gui/AudioStats.ui" line="+14"/>
        <source>Audio Statistics</source>
        <translation>Hangstatisztikák</translation>
    </message>
    <message>
        <location line="+8"/>
        <source>Input Levels</source>
        <translation>Bemeneti szintek</translation>
    </message>
    <message>
        <location line="+6"/>
        <source>Peak microphone level</source>
        <translation>Felvétel tetőpontjának értéke</translation>
    </message>
    <message>
        <location line="+7"/>
        <location line="+20"/>
        <location line="+20"/>
        <source>Peak power in last frame</source>
        <translation>Az utolsó szakasz tetőpontjának értéke</translation>
    </message>
    <message>
        <location line="-37"/>
        <source>This shows the peak power in the last frame (20 ms), and is the same measurement as you would usually find displayed as &quot;input power&quot;. Please disregard this and look at &lt;b&gt;Microphone power&lt;/b&gt; instead, which is much more steady and disregards outliers.</source>
        <translation type="unfinished"/>
    </message>
    <message>
        <location line="+10"/>
        <source>Peak speaker level</source>
        <translation>Beszéd tetőpontjának értéke</translation>
    </message>
    <message>
        <location line="+10"/>
        <source>This shows the peak power of the speakers in the last frame (20 ms). Unless you are using a multi-channel sampling method (such as ASIO) with speaker channels configured, this will be 0. If you have such a setup configured, and this still shows 0 while you&apos;re playing audio from other programs, your setup is not working.</source>
        <translation type="unfinished"/>
    </message>
    <message>
        <location line="+10"/>
        <source>Peak clean level</source>
        <translation type="unfinished"/>
    </message>
    <message>
        <location line="+10"/>
        <source>This shows the peak power in the last frame (20 ms) after all processing. Ideally, this should be -96 dB when you&apos;re not talking. In reality, a sound studio should see -60 dB, and you should hopefully see somewhere around -20 dB. When you are talking, this should rise to somewhere between -5 and -10 dB.&lt;br /&gt;If you are using echo cancellation, and this rises to more than -15 dB when you&apos;re not talking, your setup is not working, and you&apos;ll annoy other users with echoes.</source>
        <translation type="unfinished"/>
    </message>
    <message>
        <location line="+13"/>
        <source>Signal Analysis</source>
        <translation>Jel elemzés</translation>
    </message>
    <message>
        <location line="+6"/>
        <source>Microphone power</source>
        <translation>Mikrofon ereje</translation>
    </message>
    <message>
        <location line="+7"/>
        <source>How close the current input level is to ideal</source>
        <translation>Milyen közel van a jelenlegi beviteli hangerő az ideálishoz</translation>
    </message>
    <message>
        <location line="+3"/>
        <source>This shows how close your current input volume is to the ideal. To adjust your microphone level, open whatever program you use to adjust the recording volume, and look at the value here while talking.&lt;br /&gt;&lt;b&gt;Talk loud, as you would when you&apos;re upset over getting fragged by a noob.&lt;/b&gt;&lt;br /&gt;Adjust the volume until this value is close to 100%, but make sure it doesn&apos;t go above. If it does go above, you are likely to get clipping in parts of your speech, which will degrade sound quality.</source>
        <translation>Itt láthatod, hogy milyen közel van a jelenlegi beviteli hangerőd az ideálishoz. Ahhoz, hogy ezt beállítsd nyiss meg bármilyen programot, amivel a felvétel hangerejét szoktad állítani és nézd meg az értékeket beszéd közben.&lt;br /&gt;&lt;b&gt;Beszélj hangosan, mintha hisztiznél vagy kiborulnál.&lt;/b&gt;&lt;br /&gt;Addig állítsd a hangerőt, amíg ez az érték közel nem lesz a 100 százalékhoz, de vigyázz, hogy ne menjen az fölé. Ha mégis fölé megy, valószínűleg darabos részeket fogsz hallani a beszédedben, ami rontja a hangminőséget.</translation>
    </message>
    <message>
        <location line="+10"/>
        <source>Signal-To-Noise ratio</source>
        <translation>Jelek zajként aránya</translation>
    </message>
    <message>
        <location line="+7"/>
        <source>Signal-To-Noise ratio from the microphone</source>
        <translation>Jelek zajként aránya a mikrofonodból</translation>
    </message>
    <message>
        <location line="+3"/>
        <source>This is the Signal-To-Noise Ratio (SNR) of the microphone in the last frame (20 ms). It shows how much clearer the voice is compared to the noise.&lt;br /&gt;If this value is below 1.0, there&apos;s more noise than voice in the signal, and so quality is reduced.&lt;br /&gt;There is no upper limit to this value, but don&apos;t expect to see much above 40-50 without a sound studio.</source>
        <translation type="unfinished"/>
    </message>
    <message>
        <location line="+10"/>
        <source>Speech Probability</source>
        <translation>Beszéd valószínűsége</translation>
    </message>
    <message>
        <location line="+7"/>
        <source>Probability of speech</source>
        <translation>Beszéd valószínűsége</translation>
    </message>
    <message>
        <location line="+3"/>
        <source>This is the probability that the last frame (20 ms) was speech and not environment noise.&lt;br /&gt;Voice activity transmission depends on this being right. The trick with this is that the middle of a sentence is always detected as speech; the problem is the pauses between words and the start of speech. It&apos;s hard to distinguish a sigh from a word starting with &apos;h&apos;.&lt;br /&gt;If this is in bold font, it means RetroShare is currently transmitting (if you&apos;re connected).</source>
        <translation type="unfinished"/>
    </message>
    <message>
        <location line="+15"/>
        <source>Configuration feedback</source>
        <translation>Beállítások visszajelzése</translation>
    </message>
    <message>
        <location line="+6"/>
        <source>Current audio bitrate</source>
        <translation>Jelenlegi hang bitráta</translation>
    </message>
    <message>
        <location line="+13"/>
        <source>Bitrate of last frame</source>
        <translation>Az utolsó szakasz bitrátája</translation>
    </message>
    <message>
        <location line="+3"/>
        <source>This is the audio bitrate of the last compressed frame (20 ms), and as such will jump up and down as the VBR adjusts the quality. The peak bitrate can be adjusted in the Settings dialog.</source>
        <translation>Ez az utolsó tömörített szakasz (20 másodperc) bitrátája és jól látszik, hogy fel le ugrál, ahogy a VBR szabályozza a minőségét. A bitráta felső határa módosítható a beállításoknál.</translation>
    </message>
    <message>
        <location line="+10"/>
        <source>DoublePush interval</source>
        <translation>Dupla nyomás sebessége</translation>
    </message>
    <message>
        <location line="+13"/>
        <source>Time between last two Push-To-Talk presses</source>
        <translation>Két utolsó dupla nyomos között eltelt idő</translation>
    </message>
    <message>
        <location line="+10"/>
        <source>Speech Detection</source>
        <translation>Beszéd érzékelés</translation>
    </message>
    <message>
        <location line="+7"/>
        <source>Current speech detection chance</source>
        <translation>Jelenlegi beszéd érzékelés esélye</translation>
    </message>
    <message>
        <location line="+3"/>
        <source>&lt;b&gt;This shows the current speech detection settings.&lt;/b&gt;&lt;br /&gt;You can change the settings from the Settings dialog or from the Audio Wizard.</source>
        <translation>&lt;b&gt;Itt láthatod a jelenlegi beszéd érzékelés beállításait.&lt;/b&gt;&lt;br /&gt;Ezeket módosíthatod a beállítások menüben, vagy a hangvarázslóban.</translation>
    </message>
    <message>
        <location line="+29"/>
        <source>Signal and noise power spectrum</source>
        <translation>Jel és zaj erejének ábrája</translation>
    </message>
    <message>
        <location line="+6"/>
        <source>Power spectrum of input signal and noise estimate</source>
        <translation>Bemeneti jel és zaj értékének ábrája</translation>
    </message>
    <message>
        <location line="+3"/>
        <source>This shows the power spectrum of the current input signal (red line) and the current noise estimate (filled blue).&lt;br /&gt;All amplitudes are multiplied by 30 to show the interesting parts (how much more signal than noise is present in each waveband).&lt;br /&gt;This is probably only of interest if you&apos;re trying to fine-tune noise conditions on your microphone. Under good conditions, there should be just a tiny flutter of blue at the bottom. If the blue is more than halfway up on the graph, you have a seriously noisy environment.</source>
        <translation type="unfinished"/>
    </message>
    <message>
        <location line="+16"/>
        <source>Echo Analysis</source>
        <translation>Visszhang elemzés</translation>
    </message>
    <message>
        <location line="+12"/>
        <source>Weights of the echo canceller</source>
        <translation>Visszhang megszüntetés erőssége</translation>
    </message>
    <message>
        <location line="+3"/>
        <source>This shows the weights of the echo canceller, with time increasing downwards and frequency increasing to the right.&lt;br /&gt;Ideally, this should be black, indicating no echo exists at all. More commonly, you&apos;ll have one or more horizontal stripes of bluish color representing time delayed echo. You should be able to see the weights updated in real time.&lt;br /&gt;Please note that as long as you have nothing to echo off, you won&apos;t see much useful data here. Play some music and things should stabilize. &lt;br /&gt;You can choose to view the real or imaginary parts of the frequency-domain weights, or alternately the computed modulus and phase. The most useful of these will likely be modulus, which is the amplitude of the echo, and shows you how much of the outgoing signal is being removed at that time step. The other viewing modes are mostly useful to people who want to tune the echo cancellation algorithms.&lt;br /&gt;Please note: If the entire image fluctuates massively while in modulus mode, the echo canceller fails to find any correlation whatsoever between the two input sources (speakers and microphone). Either you have a very long delay on the echo, or one of the input sources is configured wrong.</source>
        <translation type="unfinished"/>
    </message>
</context>
<context>
    <name>AudioWizard</name>
    <message>
        <location filename="../gui/AudioWizard.ui" line="+14"/>
        <source>Audio Tuning Wizard</source>
        <translation>Hang finomhangolása varázsló</translation>
    </message>
    <message>
        <location line="+4"/>
        <source>Introduction</source>
        <translation>Bevezetés</translation>
    </message>
    <message>
        <location line="+3"/>
        <source>Welcome to the RetroShare Audio Wizard</source>
        <translation>Üdvözöllek a RetroShare hangvarázslóban</translation>
    </message>
    <message>
        <location line="+11"/>
        <source>This is the audio tuning wizard for RetroShare. This will help you correctly set the input levels of your sound card, and also set the correct parameters for sound processing in Retroshare. </source>
        <translation type="unfinished"/>
    </message>
    <message>
        <location line="+24"/>
        <source>Volume tuning</source>
        <translation>Hangerő finomhangolása</translation>
    </message>
    <message>
        <location line="+3"/>
        <source>Tuning microphone hardware volume to optimal settings.</source>
        <translation>Mikrofon hangerejének finomhangolása a legjobb értékre</translation>
    </message>
    <message>
        <location line="+11"/>
        <source>&lt;p &gt;Open your sound control panel and go to the recording settings. Make sure the microphone is selected as active input with maximum recording volume. If there's an option to enable a &amp;quot;Microphone boost&amp;quot; make sure it's checked. &lt;/p&gt;
&lt;p&gt;Speak loudly, as when you are annoyed or excited. Decrease the volume in the sound control panel until the bar below stays as high as possible in the green and orange but not the red zone while you speak. &lt;/p&gt;</source>
        <translation type="unfinished"/>
    </message>
    <message>
        <location line="+16"/>
        <source>Talk normally, and adjust the slider below so that the bar moves into green when you talk, and doesn&apos;t go into the orange zone.</source>
        <translation type="unfinished"/>
    </message>
    <message>
        <location line="+44"/>
        <source>Stop looping echo for this wizard</source>
        <translation>Folyamatos visszhang leállítása a varázslóhoz</translation>
    </message>
    <message>
        <location line="+20"/>
        <source>Apply some high contrast optimizations for visually impaired users</source>
        <translation type="unfinished"/>
    </message>
    <message>
        <location line="+3"/>
        <source>Use high contrast graphics</source>
        <translation>Magas kontrasztos grafika használata</translation>
    </message>
    <message>
        <location line="+10"/>
        <source>Voice Activity Detection</source>
        <translation>Hang érzékelése</translation>
    </message>
    <message>
        <location line="+3"/>
        <source>Letting RetroShare figure out when you&apos;re talking and when you&apos;re silent.</source>
        <translation>Hagyd a RetroSharenek, hogy kitalálja mikor beszélsz és mikor vagy csendben.</translation>
    </message>
    <message>
        <location line="+6"/>
        <source>This will help Retroshare figure out when you are talking. The first step is selecting which data value to use.</source>
        <translation>Ez segíteni fog a RetroSharenek, hogy kitalálja mikor beszélsz. Az első lépés, hogy kiválaszd melyik módszert használja.</translation>
    </message>
    <message>
        <location line="+12"/>
        <source>Push To Talk:</source>
        <translation>Gombnyomás a beszédhez:</translation>
    </message>
    <message>
        <location line="+29"/>
        <source>Voice Detection</source>
        <translation>Hangérzékelés</translation>
    </message>
    <message>
        <location line="+13"/>
        <source>Next you need to adjust the following slider. The first few utterances you say should end up in the green area (definitive speech). While talking, you should stay inside the yellow (might be speech) and when you&apos;re not talking, everything should be in the red (definitively not speech).</source>
        <translation>Most a következő csúszkát kell állítanod.  Az első pár szónak, amit kimondasz a fenti zöld területen kell végződnie (érzékelt beszéd). Amíg beszélsz, addig a sárga mezőben kell maradnod (valószínűleg beszéd). Amikor nem beszélsz, mindennek a piros mezőben kell lennie (egyértelműen nem beszéd).</translation>
    </message>
    <message>
        <location line="+64"/>
        <source>Continuous transmission</source>
        <translation>Folyamatos átvitel</translation>
    </message>
    <message>
        <location line="+8"/>
        <source>Finished</source>
        <translation>Elkészült</translation>
    </message>
    <message>
        <location line="+3"/>
        <source>Enjoy using RetroShare</source>
        <translation>Kellemes RetroShare használatot</translation>
    </message>
    <message>
        <location line="+11"/>
        <source>Congratulations. You should now be ready to enjoy a richer sound experience with Retroshare.</source>
        <translation>Gratulálok. Most már minőségibb hangokat hallhatsz a RetroShareben.</translation>
    </message>
</context>
<context>
    <name>QObject</name>
    <message>
        <location filename="../VOIPPlugin.cpp" line="+124"/>
        <source>&lt;h3&gt;RetroShare VOIP plugin&lt;/h3&gt;&lt;br/&gt;   * Contributors: Cyril Soler, Josselin Jacquard&lt;br/&gt;</source>
        <translation>&lt;h3&gt;RetroShare VOIP beépülő&lt;/h3&gt;&lt;br/&gt;   * Fejlesztők: Cyril Soler, Josselin Jacquard&lt;br/&gt;</translation>
    </message>
    <message>
        <location line="+1"/>
        <source>&lt;br/&gt;The VOIP plugin adds VOIP to the private chat window of RetroShare. to use it, proceed as follows:&lt;UL&gt;</source>
        <translation>&lt;br/&gt;A VOIP beépülő a RetroShare privát beszélgetéseinél használható. Kipróbáláshoz a következőket kell tenned:&lt;UL&gt;</translation>
    </message>
    <message>
        <location line="+1"/>
        <source>&lt;li&gt; setup microphone levels using the configuration panel&lt;/li&gt;</source>
        <translation>&lt;li&gt; állítsd be a mikrofon adatait a beállítási panelen&lt;/li&gt;</translation>
    </message>
    <message>
        <location line="+1"/>
        <source>&lt;li&gt; check your microphone by looking at the VU-metters&lt;/li&gt;</source>
        <translation>&lt;li&gt; ellenőrízd a mikrofonodat a VU-mércék segítségével&lt;/li&gt;</translation>
    </message>
    <message>
        <location line="+1"/>
        <source>&lt;li&gt; in the private chat, enable sound input/output by clicking on the two VOIP icons&lt;/li&gt;&lt;/ul&gt;</source>
        <translation>&lt;li&gt; a privát beszélgetésben engedélyezd a hang be-kimenetet a VOIP ikonok segítségével&lt;/li&gt;&lt;/ul&gt;</translation>
    </message>
    <message>
        <location line="+1"/>
        <source>Your friend needs to run the plugin to talk/listen to you, or course.</source>
        <translation>Természetesen a barátodnak is rendelkeznie kell a VOIP beépülővel, hogy hallhasson téged, illetve beszélhessen hozzád.</translation>
    </message>
    <message>
        <location line="+1"/>
        <source>&lt;br/&gt;&lt;br/&gt;This is an experimental feature. Don&apos;t hesitate to send comments and suggestion to the RS dev team.</source>
        <translation>&lt;br/&gt;&lt;br/&gt;Ez egy kísérleti funkció. Ne tétovázz! Bátran küldj javaslatokat és hibajelentéseket a RetroShare fejlesztői csapatának.</translation>
    </message>
</context>
<context>
    <name>VOIP</name>
    <message>
        <location line="+49"/>
        <source>This plugin provides voice communication between friends in RetroShare.</source>
        <translation>A beépülő hangbeszélgetést tesz lehetővé a barátaiddal.</translation>
    </message>
</context>
<context>
    <name>VOIPChatWidgetHolder</name>
    <message>
        <location filename="../gui/VOIPChatWidgetHolder.cpp" line="+63"/>
        <source>Mute</source>
        <translation type="unfinished"/>
    </message>
    <message>
        <location line="+13"/>
        <source>Start Call</source>
        <translation type="unfinished"/>
    </message>
    <message>
        <location line="+28"/>
        <source>Start Video Call</source>
        <translation type="unfinished"/>
    </message>
    <message>
        <location line="-14"/>
        <source>Hangup Call</source>
        <translation type="unfinished"/>
    </message>
    <message>
        <location line="+79"/>
        <source>Mute yourself</source>
        <translation>Némítsd magadat</translation>
    </message>
    <message>
        <location line="+2"/>
        <source>Unmute yourself</source>
        <translation type="unfinished"/>
    </message>
    <message>
        <location line="+19"/>
        <location line="+37"/>
        <location line="+38"/>
        <location line="+18"/>
        <location line="+13"/>
        <location line="+92"/>
        <source>VoIP Status</source>
        <translation type="unfinished"/>
    </message>
    <message>
        <location line="-198"/>
        <source>Outgoing Call stopped.</source>
        <translation type="unfinished"/>
    </message>
    <message>
        <location line="+19"/>
        <source>Hold Call</source>
        <translation type="unfinished"/>
    </message>
    <message>
        <location line="+18"/>
        <source>Outgoing Call is started...</source>
        <translation type="unfinished"/>
    </message>
    <message>
        <location line="+15"/>
        <source>Resume Call</source>
        <translation type="unfinished"/>
    </message>
    <message>
        <location line="+20"/>
        <source>Shut camera off</source>
        <translation type="unfinished"/>
    </message>
    <message>
        <location line="+4"/>
        <source>You&apos;re now sending video...</source>
        <translation type="unfinished"/>
    </message>
    <message>
        <location line="+12"/>
        <location line="+21"/>
        <source>Activate camera</source>
        <translation type="unfinished"/>
    </message>
    <message>
        <location line="-15"/>
        <source>Video call stopped</source>
        <translation type="unfinished"/>
    </message>
    <message>
        <location line="+13"/>
        <source>%1 inviting you to start a video conversation. do you want Accept or Decline the invitation?</source>
        <translation type="unfinished"/>
    </message>
    <message>
        <location line="+1"/>
        <source>Accept Video Call</source>
        <translation type="unfinished"/>
    </message>
    <message>
        <location line="+91"/>
        <source>%1 inviting you to start a audio conversation. do you want Accept or Decline the invitation?</source>
        <translation type="unfinished"/>
    </message>
    <message>
        <location line="+1"/>
        <source>Accept Call</source>
        <translation type="unfinished"/>
    </message>
    <message>
        <location line="+1"/>
        <source>Activate audio</source>
        <translation type="unfinished"/>
    </message>
    <message>
        <location line="+21"/>
        <source>Answer</source>
        <translation type="unfinished"/>
    </message>
</context>
<context>
    <name>VOIPPlugin</name>
    <message>
        <location filename="../VOIPPlugin.cpp" line="+5"/>
        <source>VOIP</source>
        <translation>VOIP</translation>
    </message>
</context>
<context>
    <name>VOIPToasterItem</name>
    <message>
        <location filename="../gui/VOIPToasterItem.cpp" line="+43"/>
        <source>Answer</source>
        <translation type="unfinished"/>
    </message>
    <message>
        <location line="+4"/>
        <source>Answer with video</source>
        <translation type="unfinished"/>
    </message>
</context>
<context>
    <name>VOIPToasterNotify</name>
    <message>
        <location filename="../gui/VOIPToasterNotify.cpp" line="+56"/>
        <source>VOIP</source>
        <translation>VOIP</translation>
    </message>
    <message>
        <location line="+3"/>
        <source>Accept</source>
        <translation>Elfogadás</translation>
    </message>
    <message>
        <location line="+1"/>
        <source>Bandwidth Information</source>
        <translation type="unfinished"/>
    </message>
    <message>
        <location line="+1"/>
        <source>Audio or Video Data</source>
        <translation type="unfinished"/>
    </message>
    <message>
        <location line="+1"/>
        <source>HangUp</source>
        <translation type="unfinished"/>
    </message>
    <message>
        <location line="+1"/>
        <source>Invitation</source>
        <translation type="unfinished"/>
    </message>
    <message>
        <location line="+2"/>
        <source>Audio Call</source>
        <translation type="unfinished"/>
    </message>
    <message>
        <location line="+1"/>
        <source>Video Call</source>
        <translation type="unfinished"/>
    </message>
    <message>
        <location line="+110"/>
        <source>Test VOIP Accept</source>
        <translation type="unfinished"/>
    </message>
    <message>
        <location line="+1"/>
        <source>Test VOIP BandwidthInfo</source>
        <translation type="unfinished"/>
    </message>
    <message>
        <location line="+1"/>
        <source>Test VOIP Data</source>
        <translation type="unfinished"/>
    </message>
    <message>
        <location line="+1"/>
        <source>Test VOIP HangUp</source>
        <translation type="unfinished"/>
    </message>
    <message>
        <location line="+1"/>
        <source>Test VOIP Invitation</source>
        <translation type="unfinished"/>
    </message>
    <message>
        <location line="+2"/>
        <source>Test VOIP Audio Call</source>
        <translation type="unfinished"/>
    </message>
    <message>
        <location line="+1"/>
        <source>Test VOIP Video Call</source>
        <translation type="unfinished"/>
    </message>
    <message>
        <location line="+21"/>
        <source>Accept received from this peer.</source>
        <translation type="unfinished"/>
    </message>
    <message>
        <location line="+24"/>
        <source>Bandwidth Info received from this peer:%1</source>
        <translation type="unfinished"/>
    </message>
    <message>
        <location line="+24"/>
        <source>Audio or Video Data received from this peer.</source>
        <translation type="unfinished"/>
    </message>
    <message>
        <location line="+24"/>
        <source>HangUp received from this peer.</source>
        <translation type="unfinished"/>
    </message>
    <message>
        <location line="+24"/>
        <source>Invitation received from this peer.</source>
        <translation type="unfinished"/>
    </message>
    <message>
        <location line="+25"/>
        <location line="+24"/>
        <source>calling</source>
        <translation type="unfinished"/>
    </message>
</context>
</TS>