Fixes https://github.com/matrix-org/synapse/issues/2431
Adds config option `encryption_enabled_by_default_for_room_type`, which determines whether encryption should be enabled with the default encryption algorithm in private or public rooms upon creation. Whether the room is private or public is decided based upon the room creation preset that is used.
Part of this PR is also pulling out all of the individual instances of `m.megolm.v1.aes-sha2` into a constant variable to eliminate typos ala https://github.com/matrix-org/synapse/pull/7637
Based on #7637
The idea here is that if an instance persists an event via the replication HTTP API it can return before we receive that event over replication, which can lead to races where code assumes that persisting an event immediately updates various caches (e.g. current state of the room).
Most of Synapse doesn't hit such races, so we don't do the waiting automagically, instead we do so where necessary to avoid unnecessary delays. We may decide to change our minds here if it turns out there are a lot of subtle races going on.
People probably want to look at this commit by commit.
When we get an invite over federation, store the room version in the rooms table.
The general idea here is that, when we pull the invite out again, we'll want to know what room_version it belongs to (so that we can later redact it if need be). So we need to store it somewhere...
This is intended as a precursor to storing room versions when we receive an
invite over federation, but has the happy side-effect of fixing #3374 at last.
In short: change the store_room with try/except to a proper upsert which
updates the right columns.
==============================
Bugfixes
--------
- Fix an issue with cross-signing where device signatures were not sent to remote servers. ([\#6844](https://github.com/matrix-org/synapse/issues/6844))
- Fix to the unknown remote device detection which was introduced in 1.10.rc1. ([\#6848](https://github.com/matrix-org/synapse/issues/6848))
Internal Changes
----------------
- Detect unexpected sender keys on remote encrypted events and resync device lists. ([\#6850](https://github.com/matrix-org/synapse/issues/6850))
-----BEGIN PGP SIGNATURE-----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=kcSy
-----END PGP SIGNATURE-----
Merge tag 'v1.10.0rc2' into develop
Synapse 1.10.0rc2 (2020-02-06)
==============================
Bugfixes
--------
- Fix an issue with cross-signing where device signatures were not sent to remote servers. ([\#6844](https://github.com/matrix-org/synapse/issues/6844))
- Fix to the unknown remote device detection which was introduced in 1.10.rc1. ([\#6848](https://github.com/matrix-org/synapse/issues/6848))
Internal Changes
----------------
- Detect unexpected sender keys on remote encrypted events and resync device lists. ([\#6850](https://github.com/matrix-org/synapse/issues/6850))
We were looking at the wrong event type (`m.room.encryption` vs
`m.room.encrypted`).
Also fixup the duplicate `EvenTypes` entries.
Introduced in #6776.
These are easier to work with than the strings and we normally have one around.
This fixes `FederationHander._persist_auth_tree` which was passing a
RoomVersion object into event_auth.check instead of a string.
This fixes a weird bug where, if you were determined enough, you could end up with a rejected event forming part of the state at a backwards-extremity. Authing that backwards extrem would then lead to us trying to pull the rejected event from the db (with allow_rejected=False), which would fail with a 404.
When we request the state/auth_events to populate a backwards extremity (on
backfill or in the case of missing events in a transaction push), we should
check that the returned events are in the right room rather than blindly using
them in the room state or auth chain.
Given that _get_events_from_store_or_dest takes a room_id, it seems clear that
it should be sanity-checking the room_id of the requested events, so let's do
it there.
Make it return the state *after* the requested event, rather than the one
before it. This is a bit easier and requires fewer calls to
get_events_from_store_or_dest.
This fixes a weird bug where, if you were determined enough, you could end up with a rejected event forming part of the state at a backwards-extremity. Authing that backwards extrem would then lead to us trying to pull the rejected event from the db (with allow_rejected=False), which would fail with a 404.
When we request the state/auth_events to populate a backwards extremity (on
backfill or in the case of missing events in a transaction push), we should
check that the returned events are in the right room rather than blindly using
them in the room state or auth chain.
Given that _get_events_from_store_or_dest takes a room_id, it seems clear that
it should be sanity-checking the room_id of the requested events, so let's do
it there.
Make it return the state *after* the requested event, rather than the one
before it. This is a bit easier and requires fewer calls to
get_events_from_store_or_dest.
PaginationHandler.get_messages is only called by RoomMessageListRestServlet,
which is async.
Chase the code path down from there:
- FederationHandler.maybe_backfill (and nested try_backfill)
- FederationHandler.backfill
have_events was a map from event_id to rejection reason (or None) for events
which are in our local database. It was used as filter on the list of
event_ids being passed into get_events_as_list. However, since
get_events_as_list will ignore any event_ids that are unknown or rejected, we
can equivalently just leave it to get_events_as_list to do the filtering.
That means that we don't have to keep `have_events` up-to-date, and can use
`have_seen_events` instead of `get_seen_events_with_rejection` in the one place
we do need it.
Implement part [MSC2228](https://github.com/matrix-org/matrix-doc/pull/2228). The parts that differ are:
* the feature is hidden behind a configuration flag (`enable_ephemeral_messages`)
* self-destruction doesn't happen for state events
* only implement support for the `m.self_destruct_after` field (not the `m.self_destruct` one)
* doesn't send synthetic redactions to clients because for this specific case we consider the clients to be able to destroy an event themselves, instead we just censor it (by pruning its JSON) in the database
Fixes a bug where rejected events were persisted with the wrong state group.
Also fixes an occasional internal-server-error when receiving events over
federation which are rejected and (possibly because they are
backwards-extremities) have no prev_group.
Fixes#6289.
* Raise an exception if accessing state for rejected events
Add some sanity checks on accessing state_group etc for
rejected events.
* Skip calculating push actions for rejected events
It didn't actually cause any bugs, because rejected events get filtered out at
various later points, but there's not point in trying to calculate the push
actions for a rejected event.
The intention here is to make it clearer which fields we can expect to be
populated when: notably, that the _event_type etc aren't used for the
synchronous impl of EventContext.
While this is not documented in the spec (but should be), Riot (and other clients) revoke 3PID invites by sending a m.room.third_party_invite event with an empty ({}) content to the room's state.
When the invited 3PID gets associated with a MXID, the identity server (which doesn't know about revocations) sends down to the MXID's homeserver all of the undelivered invites it has for this 3PID. The homeserver then tries to talk to the inviting homeserver in order to exchange these invite for m.room.member events.
When one of the invite is revoked, the inviting homeserver responds with a 500 error because it tries to extract a 'display_name' property from the content, which is empty. This might cause the invited server to consider that the server is down and not try to exchange other, valid invites (or at least delay it).
This fix handles the case of revoked invites by avoiding trying to fetch a 'display_name' from the original invite's content, and letting the m.room.member event fail the auth rules (because, since the original invite's content is empty, it doesn't have public keys), which results in sending a 403 with the correct error message to the invited server.
Another small fixup noticed during work on a larger PR. The `origin` field of `add_display_name_to_third_party_invite` is not used and likely was just carried over from the `on_PUT` method of `FederationThirdPartyInviteExchangeServlet` which, like all other servlets, provides an `origin` argument.
Since it's not used anywhere in the handler function though, we should remove it from the function arguments.
Python will return a tuple whether there are parentheses around the returned values or not.
I'm just sick of my editor complaining about this all over the place :)
I had to add quite a lot of logging to diagnose a problem with 3pid
invites - we only logged the one failure which isn't all that
informative.
NB. I'm not convinced the logic of this loop is right: I think it
should just accept a single valid signature from a trusted source
rather than fail if *any* signature is invalid. Also it should
probably not skip the rest of middle loop if a check fails? However,
I'm deliberately not changing the logic here.
Fixes that when a user exchanges a 3PID invite for a proper invite over
federation it does not include the `invite_room_state` key.
This was due to synapse incorrectly sending out two invite requests.
When processing an incoming event over federation, we may try and
resolve any unexpected differences in auth events. This is a
non-essential process and so should not stop the processing of the event
if it fails (e.g. due to the remote disappearing or not implementing the
necessary endpoints).
Fixes#3330
I was staring at this function trying to figure out wtf it was actually
doing. This is (hopefully) a non-functional refactor which makes it a bit
clearer.
Currently if a call to `/get_missing_events` fails we log an exception
and stop processing the top level event we received over federation.
Instead let's try and handle it sensibly given it is a somewhat expected
failure mode.
When filtering events to send to server we check more than just history
visibility. However when deciding whether to backfill or not we only
care about the history visibility.
The transaction queue only sends out events that we generate. This was
done by checking domain of event ID, but that can no longer be used.
Instead, we may as well use the sender field.
We currently pass FrozenEvent instead of `dict` to
`compute_event_signature`, which works by accident due to `dict(event)`
producing the correct result.
This fixes PR #4493 commit 855a151
The validator was being run on the EventBuilder objects, and so the
validator only checked a subset of fields. With the upcoming
EventBuilder refactor even fewer fields will be there to validate.
To get around this we split the validation into those that can be run
against an EventBuilder and those run against a fully fledged event.
Currently they're stored as non-outliers even though the server isn't in
the room, which can be problematic in places where the code assumes it
has the state for all non outlier events.
In particular, there is an edge case where persisting the leave event
triggers a state resolution, which requires looking up the room version
from state. Since the server doesn't have the state, this causes an
exception to be thrown.
`on_new_notifications` and `on_new_receipts` in `HttpPusher` and `EmailPusher`
now always return synchronously, so we can remove the `defer.gatherResults` on
their results, and the `run_as_background_process` wrappers can be removed too
because the PusherPool methods will now complete quickly enough.
It's quite important that get_missing_events returns the *latest* events in the
room; however we were pulling event ids out of the database until we got *at
least* 10, and then taking the *earliest* of the results.
We also shouldn't really be relying on depth, and should be checking the
room_id.
If we have a forward extremity for a room as `E`, and you receive `A`, `B`,
s.t. `A -> B -> E`, and `B` also points to an unknown event `X`, then we need
to do state res between `X` and `E`.
When that happens, we need to make sure we include `X` in the state that goes
into the state res alg.
Fixes#3934.
If we've fetched state events from remote servers in order to resolve the state
for a new event, we need to actually pass those events into
resolve_events_with_factory (so that it can do the state res) and then persist
the ones we need - otherwise other bits of the codebase get confused about why
we have state groups pointing to non-existent events.
get_state_groups returns a map from state_group_id to a list of FrozenEvents,
so was very much the wrong thing to be putting as one of the entries in the
list passed to resolve_events_with_factory (which expects maps from
(event_type, state_key) to event id).
We actually want get_state_groups_ids().values() rather than
get_state_groups().
This fixes the main problem in #3923, but there are other problems with this
bit of code which get discovered once you do so.
* add some comments on things that look a bit bogus
* rename this `state` variable to avoid confusion with the `state` used
elsewhere in this function. (There was no actual conflict, but it was
a confusing bit of spaghetti.)
when processing incoming transactions, it can be hard to see what's going on,
because we process a bunch of stuff in parallel, and because we may end up
recursively working our way through a chain of three or four events.
This commit creates a way to use logcontexts to add the relevant event ids to
the log lines.
Add some informative comments about what's going on here.
Also, `sent_to_us_directly` and `get_missing` were doing the same thing (apart
from in `_handle_queued_pdus`, which looks like a bug), so let's get rid of
`get_missing` and use `sent_to_us_directly` consistently.
Let's try to rationalise the logging that happens when we are processing an
incoming transaction, to make it easier to figure out what is going wrong when
they take ages. In particular:
- make everything start with a [room_id event_id] prefix
- make sure we log a warning when catching exceptions rather than just turning
them into other, more cryptic, exceptions.
First of all, avoid resetting the logcontext before running the pushers, to fix
the "Starting db txn 'get_all_updated_receipts' from sentinel context" warning.
Instead, give them their own "background process" logcontexts.
