* Prefer `HTTPStatus` over plain `int`
This is an Opinion that no-one has seemed to object to yet.
* `--disallow-untyped-defs` for `tests.rest.client.test_directory`
* Improve synapse's annotations for deleting aliases
* Test case for deleting a room alias
* Changelog
Co-authored-by: Dirk Klimpel <5740567+dklimpel@users.noreply.github.com>
Co-authored-by: Andrew Morgan <1342360+anoadragon453@users.noreply.github.com>
This is the final piece of the jigsaw for #9595. As with other changes before this one (eg #10771), we need to make sure that we auth the auth events in the right order, and actually check that their predecessors haven't been rejected.
To do this I've reused the existing code we use when persisting outliers elsewhere.
I've removed the code for attempting to fetch missing auth_events - the events should have been present in the send_join response, so the likely reason they are missing is that we couldn't verify them, so requesting them again is unlikely to help. Instead, we simply drop any state which relies on those auth events, as we do at a backwards-extremity. See also matrix-org/complement#216 for a test for this.
* We only need to fetch users in private rooms
* Filter out `user_id` at the top
* Discard excluded users in the top loop
We weren't doing this in the "First, if they're our user" branch so this
is a bugfix.
* The caller must check that `user_id` is included
This is in the docstring. There are two call sites:
- one in `_handle_room_publicity_change`, which explicitly checks before calling;
- and another in `_handle_room_membership_event`, which returns early if
the user is excluded.
So this change is safe.
* Test joining a private room with an excluded user
* Tweak an existing test
* Changelog
* test docstring
* lint
Currently, when we receive an event whose auth_events differ from those we expect, we state-resolve between the two state sets, and check that the event passes auth based on the resolved state.
This means that it's possible for us to accept events which don't pass auth at their declared auth_events (or where the auth events themselves were rejected), leading to problems down the line like #10083.
This change means we will:
* ignore any events where we cannot find the auth events
* reject any events whose auth events were rejected
* reject any events which do not pass auth at their declared auth_events.
Together with a whole raft of previous work, this is a partial fix to #9595.
Fixes#6643.
Based on #11009.
This fixes a bug where we would accept an event whose `auth_events` include
rejected events, if the rejected event was shadowed by another `auth_event`
with same `(type, state_key)`.
The approach is to pass a list of auth events into
`check_auth_rules_for_event` instead of a dict, which of course means updating
the call sites.
This is an extension of #10956.
Found while working on the Gitter backfill script and noticed
it only happened after we sent 7 batches, https://gitlab.com/gitterHQ/webapp/-/merge_requests/2229#note_665906390
When there are more than 5 backward extremities for a given depth,
backfill will throw an error because we sliced the extremity list
to 5 but then try to iterate over the full list. This causes
us to look for state that we never fetched and we get a `KeyError`.
Before when calling `/messages` when there are more than 5 backward extremities:
```
Traceback (most recent call last):
File "/usr/local/lib/python3.8/site-packages/synapse/http/server.py", line 258, in _async_render_wrapper
callback_return = await self._async_render(request)
File "/usr/local/lib/python3.8/site-packages/synapse/http/server.py", line 446, in _async_render
callback_return = await raw_callback_return
File "/usr/local/lib/python3.8/site-packages/synapse/rest/client/room.py", line 580, in on_GET
msgs = await self.pagination_handler.get_messages(
File "/usr/local/lib/python3.8/site-packages/synapse/handlers/pagination.py", line 396, in get_messages
await self.hs.get_federation_handler().maybe_backfill(
File "/usr/local/lib/python3.8/site-packages/synapse/handlers/federation.py", line 133, in maybe_backfill
return await self._maybe_backfill_inner(room_id, current_depth, limit)
File "/usr/local/lib/python3.8/site-packages/synapse/handlers/federation.py", line 386, in _maybe_backfill_inner
likely_extremeties_domains = get_domains_from_state(states[e_id])
KeyError: '$zpFflMEBtZdgcMQWTakaVItTLMjLFdKcRWUPHbbSZJl'
```
Resolve and share `state_groups` for all historical events in batch. This also helps for showing the appropriate avatar/displayname in Element and will work whenever `/messages` has one of the historical messages as the first message in the batch.
This does have the flaw where if you just insert a single historical event somewhere, it probably won't resolve the state correctly from `/messages` or `/context` since it will grab a non historical event above or below with resolved state which never included the historical state back then. For the same reasions, this also does not work in Element between the transition from actual messages to historical messages. In the Gitter case, this isn't really a problem since all of the historical messages are in one big lump at the beginning of the room.
For a future iteration, might be good to look at `/messages` and `/context` to additionally add the `state` for any historical messages in that batch.
---
How are the `state_groups` shared? To illustrate the `state_group` sharing, see this example:
**Before** (new `state_group` for every event 😬, very inefficient):
```
# Tests from https://github.com/matrix-org/complement/pull/206
$ COMPLEMENT_ALWAYS_PRINT_SERVER_LOGS=1 COMPLEMENT_DIR=../complement ./scripts-dev/complement.sh TestBackfillingHistory/parallel/should_resolve_member_state_events_for_historical_events
create_new_client_event m.room.member event=$_JXfwUDIWS6xKGG4SmZXjSFrizhARM7QblhATVWWUcA state_group=None
create_new_client_event org.matrix.msc2716.insertion event=$1ZBfmBKEjg94d-vGYymKrVYeghwBOuGJ3wubU1-I9y0 state_group=9
create_new_client_event org.matrix.msc2716.insertion event=$Mq2JvRetTyclPuozRI682SAjYp3GqRuPc8_cH5-ezPY state_group=10
create_new_client_event m.room.message event=$MfmY4rBQkxrIp8jVwVMTJ4PKnxSigpG9E2cn7S0AtTo state_group=11
create_new_client_event m.room.message event=$uYOv6V8wiF7xHwOMt-60d1AoOIbqLgrDLz6ZIQDdWUI state_group=12
create_new_client_event m.room.message event=$PAbkJRMxb0bX4A6av463faiAhxkE3FEObM1xB4D0UG4 state_group=13
create_new_client_event org.matrix.msc2716.batch event=$Oy_S7AWN7rJQe_MYwGPEy6RtbYklrI-tAhmfiLrCaKI state_group=14
```
**After** (all events in batch sharing `state_group=10`) (the base insertion event has `state_group=8` which matches the `prev_event` we're inserting next to):
```
# Tests from https://github.com/matrix-org/complement/pull/206
$ COMPLEMENT_ALWAYS_PRINT_SERVER_LOGS=1 COMPLEMENT_DIR=../complement ./scripts-dev/complement.sh TestBackfillingHistory/parallel/should_resolve_member_state_events_for_historical_events
create_new_client_event m.room.member event=$PWomJ8PwENYEYuVNoG30gqtybuQQSZ55eldBUSs0i0U state_group=None
create_new_client_event org.matrix.msc2716.insertion event=$e_mCU7Eah9ABF6nQU7lu4E1RxIWccNF05AKaTT5m3lw state_group=9
create_new_client_event org.matrix.msc2716.insertion event=$ui7A3_GdXIcJq0C8GpyrF8X7B3DTjMd_WGCjogax7xU state_group=10
create_new_client_event m.room.message event=$EnTIM5rEGVezQJiYl62uFBl6kJ7B-sMxWqe2D_4FX1I state_group=10
create_new_client_event m.room.message event=$LGx5jGONnBPuNhAuZqHeEoXChd9ryVkuTZatGisOPjk state_group=10
create_new_client_event m.room.message event=$wW0zwoN50lbLu1KoKbybVMxLbKUj7GV_olozIc5i3M0 state_group=10
create_new_client_event org.matrix.msc2716.batch event=$5ZB6dtzqFBCEuMRgpkU201Qhx3WtXZGTz_YgldL6JrQ state_group=10
```
* Pull out `_handle_room_membership_event`
* Discard excluded users early
* Rearrange logic so the change is membership is effectively switched over. See PR for rationale.
This splits apart `handle_new_user` into a function which adds an entry to the `user_directory` and a function which updates the room sharing tables. I plan to continue doing more of this kind of refactoring to clarify the implementation.
The shared ratelimit function was replaced with a dedicated
RequestRatelimiter class (accessible from the HomeServer
object).
Other properties were copied to each sub-class that inherited
from BaseHandler.
This removes the magic allowing accessing configurable
variables directly from the config object. It is now required
that a specific configuration class is used (e.g. `config.foo`
must be replaced with `config.server.foo`).
Fix a long-standing bug where a batch of user directory changes would be
silently dropped if the server left a room early in the batch.
* Pull out `wait_for_background_update` in tests
Co-authored-by: Patrick Cloke <clokep@users.noreply.github.com>
Co-authored-by: Richard van der Hoff <1389908+richvdh@users.noreply.github.com>
We correctly allowed using the MSC2716 batch endpoint for
the room creator in existing room versions but accidentally didn't track
the events because of a logic flaw.
This prevented you from connecting subsequent chunks together because it would
throw the unknown batch ID error.
We only want to process MSC2716 events when:
- The room version supports MSC2716
- Any room where the homeserver has the `msc2716_enabled` experimental feature enabled and the event is from the room creator
`_check_event_auth` is only called in two places, and only one of those sets
`send_on_behalf_of`. Warming the cache isn't really part of auth anyway, so
moving it out makes a lot more sense.
There's little point in doing a fancy state reconciliation dance if the event
itself is invalid.
Likewise, there's no point checking it again in `_check_for_soft_fail`.
* add test
* add function to remove user from monthly active table in deactivate code
* add function to remove user from monthly active table
* add changelog entry
* update changelog number
* requested changes
* update docstring on new function
* fix lint error
* Update synapse/storage/databases/main/monthly_active_users.py
Co-authored-by: Richard van der Hoff <1389908+richvdh@users.noreply.github.com>
Co-authored-by: Richard van der Hoff <1389908+richvdh@users.noreply.github.com>
* Introduce `should_include_local_users_in_dir`
We exclude three kinds of local users from the user_directory tables. At
present we don't consistently exclude all three in the same places. This
commit introduces a new function to gather those exclusion conditions
together. Because we have to handle local and remote users in different
ways, I've made that function only consider the case of remote users.
It's the caller's responsibility to make the local versus remote
distinction clear and correct.
A test fixup is required. The test now hits a path which makes db
queries against the users table. The expected rows were missing, because
we were using a dummy user that hadn't actually been registered.
We also add new test cases to covert the exclusion logic.
----
By my reading this makes these changes:
* When an app service user registers or changes their profile, they will
_not_ be added to the user directory. (Previously only support and
deactivated users were excluded). This is consistent with the logic that
rebuilds the user directory. See also [the discussion
here](https://github.com/matrix-org/synapse/pull/10914#discussion_r716859548).
* When rebuilding the directory, exclude support and disabled users from
room sharing tables. Previously only appservice users were excluded.
* Exclude all three categories of local users when rebuilding the
directory. Previously `_populate_user_directory_process_users` didn't do
any exclusion.
Co-authored-by: Richard van der Hoff <1389908+richvdh@users.noreply.github.com>
This fixes a "Event not signed by authorising server" error when
transition room member from join -> join, e.g. when updating a
display name or avatar URL for restricted rooms.
==============================
Bugfixes
--------
- Fix a bug introduced in v1.44.0rc1 which caused the experimental [MSC2716](https://github.com/matrix-org/matrix-doc/pull/2716) `/batch_send` endpoint to return a 500 error. ([\#10938](https://github.com/matrix-org/synapse/issues/10938))
- Fix a bug introduced in v1.44.0rc1 which prevented sending presence events to application services. ([\#10944](https://github.com/matrix-org/synapse/issues/10944))
Improved Documentation
----------------------
- Minor updates to the installation instructions. ([\#10919](https://github.com/matrix-org/synapse/issues/10919))
-----BEGIN PGP SIGNATURE-----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=aEUS
-----END PGP SIGNATURE-----
Merge tag 'v1.44.0rc2' into develop
Synapse 1.44.0rc2 (2021-09-30)
==============================
Bugfixes
--------
- Fix a bug introduced in v1.44.0rc1 which caused the experimental [MSC2716](https://github.com/matrix-org/matrix-doc/pull/2716) `/batch_send` endpoint to return a 500 error. ([\#10938](https://github.com/matrix-org/synapse/issues/10938))
- Fix a bug introduced in v1.44.0rc1 which prevented sending presence events to application services. ([\#10944](https://github.com/matrix-org/synapse/issues/10944))
Improved Documentation
----------------------
- Minor updates to the installation instructions. ([\#10919](https://github.com/matrix-org/synapse/issues/10919))
This follows a correction made in twisted/twisted#1664 and should fix our Twisted Trial CI job.
Until that change is in a twisted release, we'll have to ignore the type
of the `host` argument. I've raised #10899 to remind us to review the
issue in a few months' time.
Fix event context for outlier causing failures in all of the MSC2716
Complement tests.
The `EventContext.for_outlier` refactor happened in
https://github.com/matrix-org/synapse/pull/10883
and this spot was left out.
Broadly, the existing `event_auth.check` function has two parts:
* a validation section: checks that the event isn't too big, that it has the rught signatures, etc.
This bit is independent of the rest of the state in the room, and so need only be done once
for each event.
* an auth section: ensures that the event is allowed, given the rest of the state in the room.
This gets done multiple times, against various sets of room state, because it forms part of
the state res algorithm.
Currently, this is implemented with `do_sig_check` and `do_size_check` parameters, but I think
that makes everything hard to follow. Instead, we split the function in two and call each part
separately where it is needed.
* Inline `_check_event_auth` for outliers
When we are persisting an outlier, most of `_check_event_auth` is redundant:
* `_update_auth_events_and_context_for_auth` does nothing, because the
`input_auth_events` are (now) exactly the event's auth_events,
which means that `missing_auth` is empty.
* we don't care about soft-fail, kicking guest users or `send_on_behalf_of`
for outliers
... so the only thing that matters is the auth itself, so let's just do that.
* `_auth_and_persist_fetched_events_inner`: de-async `prep`
`prep` no longer calls any `async` methods, so let's make it synchronous.
* Simplify `_check_event_auth`
We no longer need to support outliers here, which makes things rather simpler.
* changelog
* lint
This is in the context of creating new module callbacks that modules in https://github.com/matrix-org/synapse-dinsic can use, in an effort to reconcile the spam checker API in synapse-dinsic with the one in mainline.
This adds a callback that's fairly similar to user_may_create_room except it also allows processing based on the invites sent at room creation.
* Factor more stuff out of `_get_events_and_persist`
It turns out that the event-sorting algorithm in `_get_events_and_persist` is
also useful in other circumstances. Here we move the current
`_auth_and_persist_fetched_events` to `_auth_and_persist_fetched_events_inner`,
and then factor the sorting part out to `_auth_and_persist_fetched_events`.
* `_get_remote_auth_chain_for_event`: remove redundant `outlier` assignment
`get_event_auth` returns events with the outlier flag already set, so this is
redundant (though we need to update a test where `get_event_auth` is mocked).
* `_get_remote_auth_chain_for_event`: move existing-event tests earlier
Move a couple of tests outside the loop. This is a bit inefficient for now, but
a future commit will make it better. It should be functionally identical.
* `_get_remote_auth_chain_for_event`: use `_auth_and_persist_fetched_events`
We can use the same codepath for persisting the events fetched as part of an
auth chain as for those fetched individually by `_get_events_and_persist` for
building the state at a backwards extremity.
* `_get_remote_auth_chain_for_event`: use a dict for efficiency
`_auth_and_persist_fetched_events` sorts the events itself, so we no longer
need to care about maintaining the ordering from `get_event_auth` (and no
longer need to sort by depth in `get_event_auth`).
That means that we can use a map, making it easier to filter out events we
already have, etc.
* changelog
* `_auth_and_persist_fetched_events`: improve docstring
Combine the two loops over the list of events, and hence get rid of
`_NewEventInfo`. Also pass the event back alongside the context, so that it's
easier to process the result.
* Reload auth events from db after fetching and persisting
In `_update_auth_events_and_context_for_auth`, when we fetch the remote auth
tree and persist the returned events: load the missing events from the database
rather than using the copies we got from the remote server.
This is mostly in preparation for additional refactors, but does have an
advantage in that if we later get around to checking the rejected status, we'll
be able to make use of it.
* Factor out `_get_remote_auth_chain_for_event` from `_update_auth_events_and_context_for_auth`
* changelog
Co-authored-by: Dirk Klimpel <5740567+dklimpel@users.noreply.github.com>
Co-authored-by: reivilibre <olivier@librepush.net>
Co-authored-by: Richard van der Hoff <1389908+richvdh@users.noreply.github.com>
This avoids the overhead of searching through the various
configuration classes by directly referencing the class that
the attributes are in.
It also improves type hints since mypy can now resolve the
types of the configuration variables.
Constructing an EventContext for an outlier is actually really simple, and
there's no sense in going via an `async` method in the `StateHandler`.
This also means that we can resolve a bunch of FIXMEs.
It's a simplification, but one that'll help make the user directory logic easier
to follow with the other changes upcoming. It's not strictly required for those
changes, but this will help simplify the resulting logic that listens for
`m.room.member` events and generally make the logic easier to follow.
This means the config option `search_all_users` ends up controlling the
search query only, and not the data we store. The cost of doing so is an
extra row in the `user_directory` and `user_directory_search` tables for
each local user which
- belongs to no public rooms
- belongs to no private rooms of size ≥ 2
I think the cost of this will be marginal (since they'll already have entries
in `users` and `profiles` anyway).
As a small upside, a homeserver whose directory was built with this
change can toggle `search_all_users` without having to rebuild their
directory.
Co-authored-by: Richard van der Hoff <1389908+richvdh@users.noreply.github.com>
Adds missing type hints to methods in the synapse.handlers
module and requires all methods to have type hints there.
This also removes the unused construct_auth_difference method
from the FederationHandler.
We added a bunch of spans in #10704, but this ended up adding a lot of
redundant spans for rooms where nothing changed, so instead we only
start the span if there might be something interesting going on.
I had one of these error messages yesterday and assumed it was an
invalid auth token (because that was an HTTP query parameter in the
test) I was working on. In fact, it was an invalid next batch token for
syncing.
