mirror of
https://git.anonymousland.org/anonymousland/synapse.git
synced 2024-12-26 23:49:23 -05:00
379d2a8c39
Converting some of the rst documentation to markdown. Attempted to preserve whitespace and line breaks to minimize cosmetic change.
352 lines
16 KiB
Markdown
352 lines
16 KiB
Markdown
# MSC1711 Certificates FAQ
|
|
|
|
## Historical Note
|
|
This document was originally written to guide server admins through the upgrade
|
|
path towards Synapse 1.0. Specifically,
|
|
[MSC1711](https://github.com/matrix-org/matrix-doc/blob/master/proposals/1711-x509-for-federation.md)
|
|
required that all servers present valid TLS certificates on their federation
|
|
API. Admins were encouraged to achieve compliance from version 0.99.0 (released
|
|
in February 2019) ahead of version 1.0 (released June 2019) enforcing the
|
|
certificate checks.
|
|
|
|
Much of what follows is now outdated since most admins will have already
|
|
upgraded, however it may be of use to those with old installs returning to the
|
|
project.
|
|
|
|
If you are setting up a server from scratch you almost certainly should look at
|
|
the [installation guide](../INSTALL.md) instead.
|
|
|
|
## Introduction
|
|
The goal of Synapse 0.99.0 is to act as a stepping stone to Synapse 1.0.0. It
|
|
supports the r0.1 release of the server to server specification, but is
|
|
compatible with both the legacy Matrix federation behaviour (pre-r0.1) as well
|
|
as post-r0.1 behaviour, in order to allow for a smooth upgrade across the
|
|
federation.
|
|
|
|
The most important thing to know is that Synapse 1.0.0 will require a valid TLS
|
|
certificate on federation endpoints. Self signed certificates will not be
|
|
sufficient.
|
|
|
|
Synapse 0.99.0 makes it easy to configure TLS certificates and will
|
|
interoperate with both >= 1.0.0 servers as well as existing servers yet to
|
|
upgrade.
|
|
|
|
**It is critical that all admins upgrade to 0.99.0 and configure a valid TLS
|
|
certificate.** Admins will have 1 month to do so, after which 1.0.0 will be
|
|
released and those servers without a valid certificate will not longer be able
|
|
to federate with >= 1.0.0 servers.
|
|
|
|
Full details on how to carry out this configuration change is given
|
|
[below](#configuring-certificates-for-compatibility-with-synapse-100). A
|
|
timeline and some frequently asked questions are also given below.
|
|
|
|
For more details and context on the release of the r0.1 Server/Server API and
|
|
imminent Matrix 1.0 release, you can also see our
|
|
[main talk from FOSDEM 2019](https://matrix.org/blog/2019/02/04/matrix-at-fosdem-2019/).
|
|
|
|
## Contents
|
|
* Timeline
|
|
* Configuring certificates for compatibility with Synapse 1.0
|
|
* FAQ
|
|
* Synapse 0.99.0 has just been released, what do I need to do right now?
|
|
* How do I upgrade?
|
|
* What will happen if I do not set up a valid federation certificate
|
|
immediately?
|
|
* What will happen if I do nothing at all?
|
|
* When do I need a SRV record or .well-known URI?
|
|
* Can I still use an SRV record?
|
|
* I have created a .well-known URI. Do I still need an SRV record?
|
|
* It used to work just fine, why are you breaking everything?
|
|
* Can I manage my own certificates rather than having Synapse renew
|
|
certificates itself?
|
|
* Do you still recommend against using a reverse proxy on the federation port?
|
|
* Do I still need to give my TLS certificates to Synapse if I am using a
|
|
reverse proxy?
|
|
* Do I need the same certificate for the client and federation port?
|
|
* How do I tell Synapse to reload my keys/certificates after I replace them?
|
|
|
|
## Timeline
|
|
|
|
**5th Feb 2019 - Synapse 0.99.0 is released.**
|
|
|
|
All server admins are encouraged to upgrade.
|
|
|
|
0.99.0:
|
|
|
|
- provides support for ACME to make setting up Let's Encrypt certs easy, as
|
|
well as .well-known support.
|
|
|
|
- does not enforce that a valid CA cert is present on the federation API, but
|
|
rather makes it easy to set one up.
|
|
|
|
- provides support for .well-known
|
|
|
|
Admins should upgrade and configure a valid CA cert. Homeservers that require a
|
|
.well-known entry (see below), should retain their SRV record and use it
|
|
alongside their .well-known record.
|
|
|
|
**10th June 2019 - Synapse 1.0.0 is released**
|
|
|
|
1.0.0 is scheduled for release on 10th June. In
|
|
accordance with the the [S2S spec](https://matrix.org/docs/spec/server_server/r0.1.0.html)
|
|
1.0.0 will enforce certificate validity. This means that any homeserver without a
|
|
valid certificate after this point will no longer be able to federate with
|
|
1.0.0 servers.
|
|
|
|
## Configuring certificates for compatibility with Synapse 1.0.0
|
|
|
|
### If you do not currently have an SRV record
|
|
|
|
In this case, your `server_name` points to the host where your Synapse is
|
|
running. There is no need to create a `.well-known` URI or an SRV record, but
|
|
you will need to give Synapse a valid, signed, certificate.
|
|
|
|
The easiest way to do that is with Synapse's built-in ACME (Let's Encrypt)
|
|
support. Full details are in [ACME.md](./ACME.md) but, in a nutshell:
|
|
|
|
1. Allow Synapse to listen on port 80 with `authbind`, or forward it from a
|
|
reverse proxy.
|
|
2. Enable acme support in `homeserver.yaml`.
|
|
3. Move your old certificates out of the way.
|
|
4. Restart Synapse.
|
|
|
|
### If you do have an SRV record currently
|
|
|
|
If you are using an SRV record, your matrix domain (`server_name`) may not
|
|
point to the same host that your Synapse is running on (the 'target
|
|
domain'). (If it does, you can follow the recommendation above; otherwise, read
|
|
on.)
|
|
|
|
Let's assume that your `server_name` is `example.com`, and your Synapse is
|
|
hosted at a target domain of `customer.example.net`. Currently you should have
|
|
an SRV record which looks like:
|
|
|
|
```
|
|
_matrix._tcp.example.com. IN SRV 10 5 8000 customer.example.net.
|
|
```
|
|
|
|
In this situation, you have three choices for how to proceed:
|
|
|
|
#### Option 1: give Synapse a certificate for your matrix domain
|
|
|
|
Synapse 1.0 will expect your server to present a TLS certificate for your
|
|
`server_name` (`example.com` in the above example). You can achieve this by
|
|
doing one of the following:
|
|
|
|
* Acquire a certificate for the `server_name` yourself (for example, using
|
|
`certbot`), and give it and the key to Synapse via `tls_certificate_path`
|
|
and `tls_private_key_path`, or:
|
|
|
|
* Use Synapse's [ACME support](./ACME.md), and forward port 80 on the
|
|
`server_name` domain to your Synapse instance.
|
|
|
|
#### Option 2: run Synapse behind a reverse proxy
|
|
|
|
If you have an existing reverse proxy set up with correct TLS certificates for
|
|
your domain, you can simply route all traffic through the reverse proxy by
|
|
updating the SRV record appropriately (or removing it, if the proxy listens on
|
|
8448).
|
|
|
|
See [reverse_proxy.md](reverse_proxy.md) for information on setting up a
|
|
reverse proxy.
|
|
|
|
#### Option 3: add a .well-known file to delegate your matrix traffic
|
|
|
|
This will allow you to keep Synapse on a separate domain, without having to
|
|
give it a certificate for the matrix domain.
|
|
|
|
You can do this with a `.well-known` file as follows:
|
|
|
|
1. Keep the SRV record in place - it is needed for backwards compatibility
|
|
with Synapse 0.34 and earlier.
|
|
|
|
2. Give Synapse a certificate corresponding to the target domain
|
|
(`customer.example.net` in the above example). You can either use Synapse's
|
|
built-in [ACME support](./ACME.md) for this (via the `domain` parameter in
|
|
the `acme` section), or acquire a certificate yourself and give it to
|
|
Synapse via `tls_certificate_path` and `tls_private_key_path`.
|
|
|
|
3. Restart Synapse to ensure the new certificate is loaded.
|
|
|
|
4. Arrange for a `.well-known` file at
|
|
`https://<server_name>/.well-known/matrix/server` with contents:
|
|
|
|
```json
|
|
{"m.server": "<target server name>"}
|
|
```
|
|
|
|
where the target server name is resolved as usual (i.e. SRV lookup, falling
|
|
back to talking to port 8448).
|
|
|
|
In the above example, where synapse is listening on port 8000,
|
|
`https://example.com/.well-known/matrix/server` should have `m.server` set to one of:
|
|
|
|
1. `customer.example.net` ─ with a SRV record on
|
|
`_matrix._tcp.customer.example.com` pointing to port 8000, or:
|
|
|
|
2. `customer.example.net` ─ updating synapse to listen on the default port
|
|
8448, or:
|
|
|
|
3. `customer.example.net:8000` ─ ensuring that if there is a reverse proxy
|
|
on `customer.example.net:8000` it correctly handles HTTP requests with
|
|
Host header set to `customer.example.net:8000`.
|
|
|
|
## FAQ
|
|
|
|
### Synapse 0.99.0 has just been released, what do I need to do right now?
|
|
|
|
Upgrade as soon as you can in preparation for Synapse 1.0.0, and update your
|
|
TLS certificates as [above](#configuring-certificates-for-compatibility-with-synapse-100).
|
|
|
|
### What will happen if I do not set up a valid federation certificate immediately?
|
|
|
|
Nothing initially, but once 1.0.0 is in the wild it will not be possible to
|
|
federate with 1.0.0 servers.
|
|
|
|
### What will happen if I do nothing at all?
|
|
|
|
If the admin takes no action at all, and remains on a Synapse < 0.99.0 then the
|
|
homeserver will be unable to federate with those who have implemented
|
|
.well-known. Then, as above, once the month upgrade window has expired the
|
|
homeserver will not be able to federate with any Synapse >= 1.0.0
|
|
|
|
### When do I need a SRV record or .well-known URI?
|
|
|
|
If your homeserver listens on the default federation port (8448), and your
|
|
`server_name` points to the host that your homeserver runs on, you do not need an
|
|
SRV record or `.well-known/matrix/server` URI.
|
|
|
|
For instance, if you registered `example.com` and pointed its DNS A record at a
|
|
fresh Upcloud VPS or similar, you could install Synapse 0.99 on that host,
|
|
giving it a server_name of `example.com`, and it would automatically generate a
|
|
valid TLS certificate for you via Let's Encrypt and no SRV record or
|
|
`.well-known` URI would be needed.
|
|
|
|
This is the common case, although you can add an SRV record or
|
|
`.well-known/matrix/server` URI for completeness if you wish.
|
|
|
|
**However**, if your server does not listen on port 8448, or if your `server_name`
|
|
does not point to the host that your homeserver runs on, you will need to let
|
|
other servers know how to find it.
|
|
|
|
In this case, you should see ["If you do have an SRV record
|
|
currently"](#if-you-do-have-an-srv-record-currently) above.
|
|
|
|
### Can I still use an SRV record?
|
|
|
|
Firstly, if you didn't need an SRV record before (because your server is
|
|
listening on port 8448 of your server_name), you certainly don't need one now:
|
|
the defaults are still the same.
|
|
|
|
If you previously had an SRV record, you can keep using it provided you are
|
|
able to give Synapse a TLS certificate corresponding to your server name. For
|
|
example, suppose you had the following SRV record, which directs matrix traffic
|
|
for example.com to matrix.example.com:443:
|
|
|
|
```
|
|
_matrix._tcp.example.com. IN SRV 10 5 443 matrix.example.com
|
|
```
|
|
|
|
In this case, Synapse must be given a certificate for example.com - or be
|
|
configured to acquire one from Let's Encrypt.
|
|
|
|
If you are unable to give Synapse a certificate for your server_name, you will
|
|
also need to use a .well-known URI instead. However, see also "I have created a
|
|
.well-known URI. Do I still need an SRV record?".
|
|
|
|
### I have created a .well-known URI. Do I still need an SRV record?
|
|
|
|
As of Synapse 0.99, Synapse will first check for the existence of a `.well-known`
|
|
URI and follow any delegation it suggests. It will only then check for the
|
|
existence of an SRV record.
|
|
|
|
That means that the SRV record will often be redundant. However, you should
|
|
remember that there may still be older versions of Synapse in the federation
|
|
which do not understand `.well-known` URIs, so if you removed your SRV record you
|
|
would no longer be able to federate with them.
|
|
|
|
It is therefore best to leave the SRV record in place for now. Synapse 0.34 and
|
|
earlier will follow the SRV record (and not care about the invalid
|
|
certificate). Synapse 0.99 and later will follow the .well-known URI, with the
|
|
correct certificate chain.
|
|
|
|
### It used to work just fine, why are you breaking everything?
|
|
|
|
We have always wanted Matrix servers to be as easy to set up as possible, and
|
|
so back when we started federation in 2014 we didn't want admins to have to go
|
|
through the cumbersome process of buying a valid TLS certificate to run a
|
|
server. This was before Let's Encrypt came along and made getting a free and
|
|
valid TLS certificate straightforward. So instead, we adopted a system based on
|
|
[Perspectives](https://en.wikipedia.org/wiki/Convergence_(SSL)): an approach
|
|
where you check a set of "notary servers" (in practice, homeservers) to vouch
|
|
for the validity of a certificate rather than having it signed by a CA. As long
|
|
as enough different notaries agree on the certificate's validity, then it is
|
|
trusted.
|
|
|
|
However, in practice this has never worked properly. Most people only use the
|
|
default notary server (matrix.org), leading to inadvertent centralisation which
|
|
we want to eliminate. Meanwhile, we never implemented the full consensus
|
|
algorithm to query the servers participating in a room to determine consensus
|
|
on whether a given certificate is valid. This is fiddly to get right
|
|
(especially in face of sybil attacks), and we found ourselves questioning
|
|
whether it was worth the effort to finish the work and commit to maintaining a
|
|
secure certificate validation system as opposed to focusing on core Matrix
|
|
development.
|
|
|
|
Meanwhile, Let's Encrypt came along in 2016, and put the final nail in the
|
|
coffin of the Perspectives project (which was already pretty dead). So, the
|
|
Spec Core Team decided that a better approach would be to mandate valid TLS
|
|
certificates for federation alongside the rest of the Web. More details can be
|
|
found in
|
|
[MSC1711](https://github.com/matrix-org/matrix-doc/blob/master/proposals/1711-x509-for-federation.md#background-the-failure-of-the-perspectives-approach).
|
|
|
|
This results in a breaking change, which is disruptive, but absolutely critical
|
|
for the security model. However, the existence of Let's Encrypt as a trivial
|
|
way to replace the old self-signed certificates with valid CA-signed ones helps
|
|
smooth things over massively, especially as Synapse can now automate Let's
|
|
Encrypt certificate generation if needed.
|
|
|
|
### Can I manage my own certificates rather than having Synapse renew certificates itself?
|
|
|
|
Yes, you are welcome to manage your certificates yourself. Synapse will only
|
|
attempt to obtain certificates from Let's Encrypt if you configure it to do
|
|
so.The only requirement is that there is a valid TLS cert present for
|
|
federation end points.
|
|
|
|
### Do you still recommend against using a reverse proxy on the federation port?
|
|
|
|
We no longer actively recommend against using a reverse proxy. Many admins will
|
|
find it easier to direct federation traffic to a reverse proxy and manage their
|
|
own TLS certificates, and this is a supported configuration.
|
|
|
|
See [reverse_proxy.md](reverse_proxy.md) for information on setting up a
|
|
reverse proxy.
|
|
|
|
### Do I still need to give my TLS certificates to Synapse if I am using a reverse proxy?
|
|
|
|
Practically speaking, this is no longer necessary.
|
|
|
|
If you are using a reverse proxy for all of your TLS traffic, then you can set
|
|
`no_tls: True`. In that case, the only reason Synapse needs the certificate is
|
|
to populate a legacy 'tls_fingerprints' field in the federation API. This is
|
|
ignored by Synapse 0.99.0 and later, and the only time pre-0.99 Synapses will
|
|
check it is when attempting to fetch the server keys - and generally this is
|
|
delegated via `matrix.org`, which is on 0.99.0.
|
|
|
|
However, there is a bug in Synapse 0.99.0
|
|
[4554](<https://github.com/matrix-org/synapse/issues/4554>) which prevents
|
|
Synapse from starting if you do not give it a TLS certificate. To work around
|
|
this, you can give it any TLS certificate at all. This will be fixed soon.
|
|
|
|
### Do I need the same certificate for the client and federation port?
|
|
|
|
No. There is nothing stopping you from using different certificates,
|
|
particularly if you are using a reverse proxy. However, Synapse will use the
|
|
same certificate on any ports where TLS is configured.
|
|
|
|
### How do I tell Synapse to reload my keys/certificates after I replace them?
|
|
|
|
Synapse will reload the keys and certificates when it receives a SIGHUP - for
|
|
example `kill -HUP $(cat homeserver.pid)`. Alternatively, simply restart
|
|
Synapse, though this will result in downtime while it restarts.
|