By persisting the user interactive authentication sessions to the database, this fixes
situations where a user hits different works throughout their auth session and also
allows sessions to persist through restarts of Synapse.
This is primarily for allowing us to send those commands from workers, but for now simply allows us to ignore echoed RDATA/POSITION commands that we sent (we get echoes of sent commands when using redis). Currently we log a WARNING on the master process every time we receive an echoed RDATA.
For direct TCP connections we need the master to relay REMOTE_SERVER_UP
commands to the other connections so that all instances get notified
about it. The old implementation just relayed to all connections,
assuming that sending back to the original sender of the command was
safe. This is not true for redis, where commands sent get echoed back to
the sender, which was causing master to effectively infinite loop
sending and then re-receiving REMOTE_SERVER_UP commands that it sent.
The fix is to ensure that we only relay to *other* connections and not
to the connection we received the notification from.
Fixes#7334.
* Factor out functions for injecting events into database
I want to add some more flexibility to the tools for injecting events into the
database, and I don't want to clutter up HomeserverTestCase with them, so let's
factor them out to a new file.
* Rework TestReplicationDataHandler
This wasn't very easy to work with: the mock wrapping was largely superfluous,
and it's useful to be able to inspect the received rows, and clear out the
received list.
* Fix AssertionErrors being thrown by EventsStream
Part of the problem was that there was an off-by-one error in the assertion,
but also the limit logic was too simple. Fix it all up and add some tests.
If the admin adds a `.yaml` file that's either empty or doesn't parse into a dict to a config directory (e.g. `conf.d` for debs installs), stuff like https://github.com/matrix-org/synapse/issues/7322 would happen. This PR checks that the file is correctly parsed into a dict, or ignores it with a warning if it parses into any other type (including `None` for empty files).
Fixes https://github.com/matrix-org/synapse/issues/7322
Figuring out how to correctly limit updates from this stream without dropping
entries is far more complicated than just counting the number of rows being
returned. We need to consider each query separately and, if any one query hits
the limit, truncate the results from the others.
I think this also fixes some potentially long-standing bugs where events or
state changes could get missed if we hit the limit on either query.
Long story short: if we're handling presence on the current worker, we shouldn't be sending USER_SYNC commands over replication.
In an attempt to figure out what is going on here, I ended up refactoring some bits of the presencehandler code, so the first 4 commits here are non-functional refactors to move this code slightly closer to sanity. (There's still plenty to do here :/). Suggest reviewing individual commits.
Fixes (I hope) #7257.
==============================
Features
--------
- Always send users their own device updates. ([\#7160](https://github.com/matrix-org/synapse/issues/7160))
- Add support for handling GET requests for `account_data` on a worker. ([\#7311](https://github.com/matrix-org/synapse/issues/7311))
Bugfixes
--------
- Fix a bug that prevented cross-signing with users on worker-mode synapses. ([\#7255](https://github.com/matrix-org/synapse/issues/7255))
- Do not treat display names as globs in push rules. ([\#7271](https://github.com/matrix-org/synapse/issues/7271))
- Fix a bug with cross-signing devices belonging to remote users who did not share a room with any user on the local homeserver. ([\#7289](https://github.com/matrix-org/synapse/issues/7289))
-----BEGIN PGP SIGNATURE-----
iQEzBAABCAAdFiEEv27Axt/F4vrTL/8QOSor00I9eP8FAl6gS+IACgkQOSor00I9
eP8CTwf+KLehHQMcrz0yoHN+/O86mpNv3Uz83BJ0qDIgezVbtqT7+ZwnK2Jb8dwM
zTcGRq5a6V+JLdfSTnXfrPzvAPt0WLaEENSAEGwZ6unqqxcG2PgATkRb0XtY8Rzh
Feu8WgJTnORbiiM3sBLI8toZMxal3X3ZcftPEAan1SaoyqLPQ2s14edDwgx64S5e
rBGzPDNSxZU1McNBq7Q11QTg3zgBUF+TYwyhnLbC5X1RdDwQpKhNZhwhYBS1yOD6
TsPjtlixC+HXb21Rmob7XY8VFxTBSBdUdtVQKAT4h3+l9bNFQLpBfDSVc7xkPiLt
/Gj+PL+YgY9xQDvHO2fVw8m4ololZw==
=p53e
-----END PGP SIGNATURE-----
Merge tag 'v1.12.4rc1' into develop
Synapse 1.12.4rc1 (2020-04-22)
==============================
Features
--------
- Always send users their own device updates. ([\#7160](https://github.com/matrix-org/synapse/issues/7160))
- Add support for handling GET requests for `account_data` on a worker. ([\#7311](https://github.com/matrix-org/synapse/issues/7311))
Bugfixes
--------
- Fix a bug that prevented cross-signing with users on worker-mode synapses. ([\#7255](https://github.com/matrix-org/synapse/issues/7255))
- Do not treat display names as globs in push rules. ([\#7271](https://github.com/matrix-org/synapse/issues/7271))
- Fix a bug with cross-signing devices belonging to remote users who did not share a room with any user on the local homeserver. ([\#7289](https://github.com/matrix-org/synapse/issues/7289))
First some background: StreamChangeCache is used to keep track of what "entities" have
changed since a given stream ID. So for example, we might use it to keep track of when the last
to-device message for a given user was received [1], and hence whether we need to pull any to-device messages from the database on a sync [2].
Now, it turns out that StreamChangeCache didn't support more than one thing being changed at
a given stream_id (this was part of the problem with #7206). However, it's entirely valid to send
to-device messages to more than one user at a time.
As it turns out, this did in fact work, because *some* methods of StreamChangeCache coped
ok with having multiple things changing on the same stream ID, and it seems we never actually
use the methods which don't work on the stream change caches where we allow multiple
changes at the same stream ID. But that feels horribly fragile, hence: let's update
StreamChangeCache to properly support this, and add some typing and some more tests while
we're at it.
[1]: https://github.com/matrix-org/synapse/blob/release-v1.12.3/synapse/storage/data_stores/main/deviceinbox.py#L301
[2]: https://github.com/matrix-org/synapse/blob/release-v1.12.3/synapse/storage/data_stores/main/deviceinbox.py#L47-L51
Splitting based on the response code means we can avoid double logging here and identical information from line 164 while still logging at info if we don't get a good response and need to retry.
Other parts of the code (such as the StreamChangeCache) assume that there will
not be multiple changes with the same stream id.
This code was introduced in #7024, and I hope this fixes#7206.
Add changelog
Save retrieved keys to the db
lint
Fix and de-brittle remote result dict processing
Use query_user_devices instead, assume only master, self_signing key types
Make changelog more useful
Remove very specific exception handling
Wrap get_verify_key_from_cross_signing_key in a try/except
Note that _get_e2e_cross_signing_verify_key can raise a SynapseError
lint
Add comment explaining why this is useful
Only fetch master and self_signing key types
Fix log statements, docstrings
Remove extraneous items from remote query try/except
lint
Factor key retrieval out into a separate function
Send device updates, modeled after SigningKeyEduUpdater._handle_signing_key_updates
Update method docstring
The general idea here is to get rid of the type: ignore annotations on all of the current_token and update_function assignments, which would have caught #7290.
After a bit of experimentation, it seems like the least-awful way to do this is to pass the offending functions in as parameters to the Stream constructor. Unfortunately that means that the concrete implementations no longer have the same constructor signature as Stream itself, which means that it gets hard to correctly annotate STREAMS_MAP.
I've also introduced a couple of new types, to take out some duplication.
Some of the query functions return generators rather than lists, so we can't
index into the result. Happily we already have a copy of the results.
(think this was introduced in #7024)
I don't really remember why this was so complicated; I think it dates
back to the time when we had to instantiate the Config classes before
we could call `add_arguments` - ie before #5597. In any case, I don't
think there's a good reason for it any more, and the impact of it
being complicated is that `--help` doesn't work correctly.
`REPLICATE` is now a valid command, and it's nice if you can issue it from the
console without remembering to call it `REPLICATE ` with a trailing space.
Separate `SimpleCommand` from `Command`, so that things which don't want to use
the `data` property don't have to, and thus fix the warnings PyCharm was giving
me about not calling `__init__` in the base class.
The aim here is to move the command handling out of the TCP protocol classes and to also merge the client and server command handling (so that we can reuse them for redis protocol). This PR simply moves the client paths to the new `ReplicationCommandHandler`, a future PR will move the server paths too.
Fixes#6815
Before figuring out whether we should alert a user on MAU, we call get_notice_room_for_user to get some info on the existing server notices room for this user. This function, if the room doesn't exist, creates it and invites the user in it. This means that, if we decide later that no server notice is needed, the user gets invited in a room with no message in it. This happens at every restart of the server, since the room ID returned by get_notice_room_for_user is cached.
This PR fixes that by moving the inviting bit to a dedicated function, that's only called when the server actually needs to send a notice to the user. A potential issue with this approach is that the room that's created by get_notice_room_for_user doesn't match how that same function looks for an existing room (i.e. it creates a room that doesn't have an invite or a join for the current user in it, so it could lead to a new room being created each time a user syncs), but I'm not sure this is a problem given it's cached until the server restarts, so that function won't run very often.
It also renames get_notice_room_for_user into get_or_create_notice_room_for_user to make what it does clearer.
Occasionally we could get a federation device list update transaction which
looked like:
```
[
{'edu_type': 'm.device_list_update', 'content': {'user_id': '@user:test', 'device_id': 'D2', 'prev_id': [], 'stream_id': 12, 'deleted': True}},
{'edu_type': 'm.device_list_update', 'content': {'user_id': '@user:test', 'device_id': 'D1', 'prev_id': [12], 'stream_id': 11, 'deleted': True}},
{'edu_type': 'm.device_list_update', 'content': {'user_id': '@user:test', 'device_id': 'D3', 'prev_id': [11], 'stream_id': 13, 'deleted': True}}
]
```
Having `stream_ids` which are lower than `prev_ids` looks odd. It might work
(I'm not actually sure), but in any case it doesn't seem like a reasonable
thing to expect other implementations to support.
* master:
1.12.1
Note where bugs were introduced
1.12.1rc1
Newsfile
Rewrite changelog
Add changelog
Only import sqlite3 when type checking
Fix another instance
Only setdefault for signatures if device has key_json
Fix starting workers when federation sending not split out.
Attempt to clarify Python version requirements (#7161)
Improve the UX of the login fallback when using SSO (#7152)
Update the wording of the config comment
Lint
Changelog
Regenerate sample config
Whitelist the login fallback by default for SSO
===========================
No significant changes since 1.12.1rc1.
Synapse 1.12.1rc1 (2020-03-31)
==============================
Bugfixes
--------
- Fix starting workers when federation sending not split out. ([\#7133](https://github.com/matrix-org/synapse/issues/7133)). Introduced in v1.12.0.
- Avoid importing `sqlite3` when using the postgres backend. Contributed by David Vo. ([\#7155](https://github.com/matrix-org/synapse/issues/7155)). Introduced in v1.12.0rc1.
- Fix a bug which could cause outbound federation traffic to stop working if a client uploaded an incorrect e2e device signature. ([\#7177](https://github.com/matrix-org/synapse/issues/7177)). Introduced in v1.11.0.
-----BEGIN PGP SIGNATURE-----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=/J/H
-----END PGP SIGNATURE-----
Merge tag 'v1.12.1'
Synapse 1.12.1 (2020-04-02)
===========================
No significant changes since 1.12.1rc1.
Synapse 1.12.1rc1 (2020-03-31)
==============================
Bugfixes
--------
- Fix starting workers when federation sending not split out. ([\#7133](https://github.com/matrix-org/synapse/issues/7133)). Introduced in v1.12.0.
- Avoid importing `sqlite3` when using the postgres backend. Contributed by David Vo. ([\#7155](https://github.com/matrix-org/synapse/issues/7155)). Introduced in v1.12.0rc1.
- Fix a bug which could cause outbound federation traffic to stop working if a client uploaded an incorrect e2e device signature. ([\#7177](https://github.com/matrix-org/synapse/issues/7177)). Introduced in v1.11.0.
* tag 'v1.12.1':
1.12.1
Note where bugs were introduced
1.12.1rc1
Newsfile
Rewrite changelog
Add changelog
Only import sqlite3 when type checking
Fix another instance
Only setdefault for signatures if device has key_json
Fix starting workers when federation sending not split out.
This broke in a recent PR (#7024) and is no longer useful due to all
replication clients implicitly subscribing to all streams, so let's
just remove it.
If there was an exception setting up one of the attributes of the Homeserver
god object, then future attempts to fetch that attribute would raise a
confusing "Cyclic dependency" error. Let's make sure that we clear the
`building` flag so that we just get the original exception.
Ref: #7169
* Remove `conn_id` usage for UserSyncCommand.
Each tcp replication connection is assigned a "conn_id", which is used
to give an ID to a remotely connected worker. In a redis world, there
will no longer be a one to one mapping between connection and instance,
so instead we need to replace such usages with an ID generated by the
remote instances and included in the replicaiton commands.
This really only effects UserSyncCommand.
* Add CLEAR_USER_SYNCS command that is sent on shutdown.
This should help with the case where a synchrotron gets restarted
gracefully, rather than rely on 5 minute timeout.
That fallback sets the redirect URL to itself (so it can process the login
token then return gracefully to the client). This would make it pointless to
ask the user for confirmation, since the URL the confirmation page would be
showing wouldn't be the client's.
* Don't show the login forms if we're currently logging in with a
password or a token.
* Submit directly the SSO login form, showing only a spinner to the
user, in order to eliminate from the clunkiness of SSO through this
fallback.
* Don't show the login forms if we're currently logging in with a
password or a token.
* Submit directly the SSO login form, showing only a spinner to the
user, in order to eliminate from the clunkiness of SSO through this
fallback.
This changes the replication protocol so that the server does not send down `RDATA` for rows that happened before the client connected. Instead, the server will send a `POSITION` and clients then query the database (or master out of band) to get up to date.
* Pull Sentinel out of LoggingContext
... and drop a few unnecessary references to it
* Factor out LoggingContext.current_context
move `current_context` and `set_context` out to top-level functions.
Mostly this means that I can more easily trace what's actually referring to
LoggingContext, but I think it's generally neater.
* move copy-to-parent into `stop`
this really just makes `start` and `stop` more symetric. It also means that it
behaves correctly if you manually `set_log_context` rather than using the
context manager.
* Replace `LoggingContext.alive` with `finished`
Turn `alive` into `finished` and make it a bit better defined.
* Add 'device_lists_outbound_pokes' as extra table.
This makes sure we check all the relevant tables to get the current max
stream ID.
Currently not doing so isn't problematic as the max stream ID in
`device_lists_outbound_pokes` is the same as in `device_lists_stream`,
however that will change.
* Change device lists stream to have one row per id.
This will make it possible to process the streams more incrementally,
avoiding having to process large chunks at once.
* Change device list replication to match new semantics.
Instead of sending down batches of user ID/host tuples, send down a row
per entity (user ID or host).
* Newsfile
* Remove handling of multiple rows per ID
* Fix worker handling
* Comments from review
This should be safe to do on all workers/masters because it is guarded by
a config option which will ensure it is only actually done on the worker
assigned as a pusher.
It was originally implemented by pulling the full auth chain of all
state sets out of the database and doing set comparison. However, that
can take a lot work if the state and auth chains are large.
Instead, lets try and fetch the auth chains at the same time and
calculate the difference on the fly, allowing us to bail early if all
the auth chains converge. Assuming that the auth chains do converge more
often than not, this should improve performance. Hopefully.
Fixes#7065
This is basically the same as https://github.com/matrix-org/synapse/pull/6847 except it tries to populate events from `state_events` rather than `current_state_events`, since the latter might have been cleared from the state of some rooms too early, leaving them with a `NULL` room version.
If an error happened while processing a SAML AuthN response, or a client
ends up doing a `GET` request to `/authn_response`, then render a
customisable error page rather than a confusing error.
Fixes#7054
I also had a look at the rest of the functions in
`EventPushActionsStore` and in the push notifications send code and it
looks to me like there shouldn't be any other method with this issue in
this part of the codebase.
