Replaces the `federation_ip_range_blacklist` configuration setting with an
`ip_range_blacklist` setting with wider scope. It now applies to:
* Federation
* Identity servers
* Push notifications
* Checking key validitity for third-party invite events
The old `federation_ip_range_blacklist` setting is still honored if present, but
with reduced scope (it only applies to federation and identity servers).
We do state res with unpersisted events when calculating the new current state of the room, so that should be the only thing impacted. I don't think this is tooooo big of a deal as:
1. the next time a state event happens in the room the current state should correct itself;
2. in the common case all the unpersisted events' auth events will be pulled in by other state, so will still return the correct result (or one which is sufficiently close to not affect the result); and
3. we mostly use the state at an event to do important operations, which isn't affected by this.
Rather than using a single JsonResource, construct a resource tree, as we do in
the prod code, and allow testcases to add extra resources by overriding
`create_resource_dict`.
This was broken in #8801 when abstracting code shared with OIDC.
After this change both SAML and OIDC have a concept of
grandfathering users, but with different implementations.
This PR adds a `room_version` argument to the `RestHelper`'s `create_room_as` function for tests. I plan to use this for testing knocking, which currently uses an unstable room version.
The spec requires synapse to support `identifier` dicts for `m.login.password`
user-interactive auth, which it did not (instead, it required an undocumented
`user` parameter.)
To fix this properly, we need to pull the code that interprets `identifier`
into `AuthHandler.validate_login` so that it can be called from the UIA code.
Fixes#5665.
This PR adds a new config option to the `push` section of the homeserver config, `group_unread_count_by_room`. By default Synapse will group push notifications by room (so if you have 1000 unread messages, if they lie in 55 rooms, you'll see an unread count on your phone of 55).
However, it is also useful to be able to send out the true count of unread messages if desired. If `group_unread_count_by_room` is set to `false`, then with the above example, one would see an unread count of 1000 (email anyone?).
Checks that the localpart returned by mapping providers for SAML and
OIDC are valid before registering new users.
Extends the OIDC tests for existing users and invalid data.
* Consistently use room_id from federation request body
Some federation APIs have a redundant `room_id` path param (see
https://github.com/matrix-org/matrix-doc/issues/2330). We should make sure we
consistently use either the path param or the body param, and the body param is
easier.
* Kill off some references to "context"
Once upon a time, "rooms" were known as "contexts". I think this kills of the
last references to "contexts".
remove the stubbing out of `request.process`, so that `requestReceived` also renders the request via the appropriate resource.
Replace render() with a stub for now.
The root resource isn't necessarily a JsonResource, so rename this method
accordingly, and update a couple of test classes to use the method rather than
directly manipulating self.resource.
Where we want to render a request against a specific Resource, call the global
make_request() function rather than the one in HomeserverTestCase, allowing us
to pass in an appropriate `Site`.
I idly noticed that these lists were out of sync with each other, causing us to miss a table in a test case (`local_invites`). Let's consolidate this list instead to prevent this from happening in the future.
We do it this way round so that only the "owner" can delete the access token (i.e. `/logout/all` by the "owner" also deletes that token, but `/logout/all` by the "target user" doesn't).
A future PR will add an API for creating such a token.
When the target user and authenticated entity are different the `Processed request` log line will be logged with a: `{@admin:server as @bob:server} ...`. I'm not convinced by that format (especially since it adds spaces in there, making it harder to use `cut -d ' '` to chop off the start of log lines). Suggestions welcome.
This modifies the configuration of structured logging to be usable from
the standard Python logging configuration.
This also separates the formatting of logs from the transport allowing
JSON logs to files or standard logs to sockets.
This allows trailing commas in multi-line arg lists.
Minor, but we might as well keep our formatting current with regard to
our minimum supported Python version.
Signed-off-by: Dan Callahan <danc@element.io>
Split admin API for reported events in detail und list view.
API was introduced with #8217 in synapse v.1.21.0.
It makes the list (`GET /_synapse/admin/v1/event_reports`) less complex and provides a better overview.
The details can be queried with: `GET /_synapse/admin/v1/event_reports/<report_id>`.
It is similar to room and users API.
It is a kind of regression in `GET /_synapse/admin/v1/event_reports`. `event_json` was removed. But the api was introduced one version before and it is an admin API (not under spec).
Signed-off-by: Dirk Klimpel dirk@klimpel.org
#8567 started a span for every background process. This is good as it means all Synapse code that gets run should be in a span (unless in the sentinel logging context), but it means we generate about 15x the number of spans as we did previously.
This PR attempts to reduce that number by a) not starting one for send commands to Redis, and b) deferring starting background processes until after we're sure they're necessary.
I don't really know how much this will help.
* Limit AS transactions to 100 events
* Update changelog.d/8606.feature
Co-authored-by: Andrew Morgan <1342360+anoadragon453@users.noreply.github.com>
* Add tests
* Update synapse/appservice/scheduler.py
Co-authored-by: Andrew Morgan <1342360+anoadragon453@users.noreply.github.com>
* Add `DeferredCache.get_immediate` method
A bunch of things that are currently calling `DeferredCache.get` are only
really interested in the result if it's completed. We can optimise and simplify
this case.
* Remove unused 'default' parameter to DeferredCache.get()
* another get_immediate instance
This implements a more standard API for instantiating a homeserver and
moves some of the dependency injection into the test suite.
More concretely this stops using `setattr` on all `kwargs` passed to `HomeServer`.
* Fix outbound federaion with multiple event persisters.
We incorrectly notified federation senders that the minimum persisted
stream position had advanced when we got an `RDATA` from an event
persister.
Notifying of federation senders already correctly happens in the
notifier, so we just delete the offending line.
* Change some interfaces to use RoomStreamToken.
By enforcing use of `RoomStreamTokens` we make it less likely that
people pass in random ints that they got from somewhere random.
Currently background proccesses stream the events stream use the "minimum persisted position" (i.e. `get_current_token()`) rather than the vector clock style tokens. This is broadly fine as it doesn't matter if the background processes lag a small amount. However, in extreme cases (i.e. SyTests) where we only write to one event persister the background processes will never make progress.
This PR changes it so that the `MultiWriterIDGenerator` keeps the current position of a given instance as up to date as possible (i.e using the latest token it sees if its not in the process of persisting anything), and then periodically announces that over replication. This then allows the "minimum persisted position" to advance, albeit with a small lag.
This could, very occasionally, cause:
```
tests.test_visibility.FilterEventsForServerTestCase.test_large_room
===============================================================================
[ERROR]
Traceback (most recent call last):
File "/src/tests/rest/media/v1/test_media_storage.py", line 86, in test_ensure_media_is_in_local_cache
self.wait_on_thread(x)
File "/src/tests/unittest.py", line 296, in wait_on_thread
self.reactor.advance(0.01)
File "/src/.tox/py35/lib/python3.5/site-packages/twisted/internet/task.py", line 826, in advance
self._sortCalls()
File "/src/.tox/py35/lib/python3.5/site-packages/twisted/internet/task.py", line 787, in _sortCalls
self.calls.sort(key=lambda a: a.getTime())
builtins.ValueError: list modified during sort
tests.rest.media.v1.test_media_storage.MediaStorageTests.test_ensure_media_is_in_local_cache
```
This PR allows Synapse modules making use of the `ModuleApi` to create and send non-membership events into a room. This can useful to have modules send messages, or change power levels in a room etc. Note that they must send event through a user that's already in the room.
The non-membership event limitation is currently arbitrary, as it's another chunk of work and not necessary at the moment.
We call `_update_stream_positions_table_txn` a lot, which is an UPSERT
that can conflict in `REPEATABLE READ` isolation level. Instead of doing
a transaction consisting of a single query we may as well run it outside
of a transaction.
Lots of different module apis is not easy to maintain.
Rather than adding yet another ModuleApi(hs, hs.get_auth_handler()) incantation, first add an hs.get_module_api() method and use it where possible.
* Optimise and test state fetching for 3p event rules
Getting all the events at once is much more efficient than getting them
individually
* Test that 3p event rules can modify events
PR #8292 tried to maintain backwards compat with modules which don't provide a
`check_visibility_can_be_modified` method, but the tests weren't being run,
and the check didn't work.
This PR allows `ThirdPartyEventRules` modules to view, manipulate and block changes to the state of whether a room is published in the public rooms directory.
While the idea of whether a room is in the public rooms list is not kept within an event in the room, `ThirdPartyEventRules` generally deal with controlling which modifications can happen to a room. Public rooms fits within that idea, even if its toggle state isn't controlled through a state event.
This is so we can tell what is going on when things are taking a while to start up.
The main change here is to ensure that transactions that are created during startup get correctly logged like normal transactions.
The idea is that in future tokens will encode a mapping of instance to position. However, we don't want to include the full instance name in the string representation, so instead we'll have a mapping between instance name and an immutable integer ID in the DB that we can use instead. We'll then do the lookup when we serialize/deserialize the token (we could alternatively pass around an `Instance` type that includes both the name and ID, but that turns out to be a lot more invasive).
This was a bit unweildy for what I wanted: in particular, I wanted to assign
each measurement straight into a bucket, rather than storing an intermediate
Counter which didn't do any bucketing at all.
I've replaced it with something that is hopefully a bit easier to use.
(I'm not entirely sure what the difference between a HistogramMetricFamily and
a GaugeHistogramMetricFamily is, but given our counters can go down as well as
up the latter *sounds* more accurate?)
* Fix table scan of events on worker startup.
This happened because we assumed "new" writers had an initial stream
position of 0, so the replication code tried to fetch all events written
by the instance between 0 and the current position.
Instead, set the initial position of new writers to the current
persisted up to position, on the assumption that new writers won't have
written anything before that point.
* Consider old writers coming back as "new".
Otherwise we'd try and fetch entries between the old stale token and the
current position, even though it won't have written any rows.
Co-authored-by: Andrew Morgan <1342360+anoadragon453@users.noreply.github.com>
Co-authored-by: Andrew Morgan <1342360+anoadragon453@users.noreply.github.com>
Broken in https://github.com/matrix-org/synapse/pull/8275 and has yet to be put in a release. Fixes https://github.com/matrix-org/synapse/issues/8418.
`next_link` is an optional parameter. However, we were checking whether the `next_link` param was valid, even if it wasn't provided. In that case, `next_link` was `None`, which would clearly not be a valid URL.
This would prevent password reset and other operations if `next_link` was not provided, and the `next_link_domain_whitelist` config option was set.
* Remove `on_timeout_cancel` from `timeout_deferred`
The `on_timeout_cancel` param to `timeout_deferred` wasn't always called on a
timeout (in particular if the canceller raised an exception), so it was
unreliable. It was also only used in one place, and to be honest it's easier to
do what it does a different way.
* Fix handling of connection timeouts in outgoing http requests
Turns out that if we get a timeout during connection, then a different
exception is raised, which wasn't always handled correctly.
To fix it, catch the exception in SimpleHttpClient and turn it into a
RequestTimedOutError (which is already a documented exception).
Also add a description to RequestTimedOutError so that we can see which stage
it failed at.
* Fix incorrect handling of timeouts reading federation responses
This was trapping the wrong sort of TimeoutError, so was never being hit.
The effect was relatively minor, but we should fix this so that it does the
expected thing.
* Fix inconsistent handling of `timeout` param between methods
`get_json`, `put_json` and `delete_json` were applying a different timeout to
the response body to `post_json`; bring them in line and test.
Co-authored-by: Patrick Cloke <clokep@users.noreply.github.com>
Co-authored-by: Erik Johnston <erik@matrix.org>
* Fix test_verify_json_objects_for_server_awaits_previous_requests
It turns out that this wasn't really testing what it thought it was testing
(in particular, `check_context` was turning failures into success, which was
making the tests pass even though it wasn't clear they should have been.
It was also somewhat overcomplex - we can test what it was trying to test
without mocking out perspectives servers.
* Fix warnings about finished logcontexts in the keyring
We need to make sure that we finish the key fetching magic before we run the
verifying code, to ensure that we don't mess up our logcontexts.
Co-authored-by: Benjamin Koch <bbbsnowball@gmail.com>
This adds configuration flags that will match a user to pre-existing users
when logging in via OpenID Connect. This is useful when switching to
an existing SSO system.
On startup `MultiWriteIdGenerator` fetches the maximum stream ID for
each instance from the table and uses that as its initial "current
position" for each writer. This is problematic as a) it involves either
a scan of events table or an index (neither of which is ideal), and b)
if rows are being persisted out of order elsewhere while the process
restarts then using the maximum stream ID is not correct. This could
theoretically lead to race conditions where e.g. events that are
persisted out of order are not sent down sync streams.
We fix this by creating a new table that tracks the current positions of
each writer to the stream, and update it each time we finish persisting
a new entry. This is a relatively small overhead when persisting events.
However for the cache invalidation stream this is a much bigger relative
overhead, so instead we note that for invalidation we don't actually
care about reliability over restarts (as there's no caches to
invalidate) and simply don't bother reading and writing to the new table
in that particular case.
The idea is to remove some of the places we pass around `int`, where it can represent one of two things:
1. the position of an event in the stream; or
2. a token that partitions the stream, used as part of the stream tokens.
The valid operations are then:
1. did a position happen before or after a token;
2. get all events that happened before or after a token; and
3. get all events between two tokens.
(Note that we don't want to allow other operations as we want to change the tokens to be vector clocks rather than simple ints)
Fixes: #8359
Trying to reactivate a user with the admin API (`PUT /_synapse/admin/v2/users/<user_name>`) causes an internal server error.
Seems to be a regression in #8033.
* Create a new function to verify that the length of a device name is
under a certain threshold.
* Refactor old code and tests to use said function.
* Verify device name length during registration of device
* Add a test for the above
Signed-off-by: Dionysis Grigoropoulos <dgrig@erethon.com>
Signed-off-by: Olivier Wilkinson (reivilibre) <olivier@librepush.net>
Co-authored-by: Patrick Cloke <clokep@users.noreply.github.com>
* Fix _set_destination_retry_timings
This came about because the code assumed that retry_interval
could not be NULL — which has been challenged by catch-up.
Add ability for ASes to /login using the `uk.half-shot.msc2778.login.application_service` login `type`.
Co-authored-by: Patrick Cloke <clokep@users.noreply.github.com>
==============================
Bugfixes
--------
- Fix a bug introduced in v1.20.0rc1 where the wrong exception was raised when invalid JSON data is encountered. ([\#8291](https://github.com/matrix-org/synapse/issues/8291))
-----BEGIN PGP SIGNATURE-----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=e2T1
-----END PGP SIGNATURE-----
Merge tag 'v1.20.0rc3' into develop
Synapse 1.20.0rc3 (2020-09-11)
==============================
Bugfixes
--------
- Fix a bug introduced in v1.20.0rc1 where the wrong exception was raised when invalid JSON data is encountered. ([\#8291](https://github.com/matrix-org/synapse/issues/8291))
Some Linux distros have begun disabling TLSv1.0 and TLSv1.1 by default
for security reasons, for example in Fedora 33 onwards:
https://fedoraproject.org/wiki/Changes/StrongCryptoSettings2
Use TLSv1.2 for the fake TLS servers created in the test suite, to avoid
failures due to OpenSSL disallowing TLSv1.0:
<twisted.python.failure.Failure OpenSSL.SSL.Error: [('SSL routines',
'ssl_choose_client_version', 'unsupported protocol')]>
Signed-off-by: Dan Callaghan <djc@djc.id.au>
This PR adds a confirmation step to resetting your user password between clicking the link in your email and your password actually being reset.
This is to better align our password reset flow with the industry standard of requiring a confirmation from the user after email validation.
If a file cannot be thumbnailed for some reason (e.g. the file is empty), then
catch the exception and convert it to a reasonable error message for the client.
`pusher_pool.on_new_notifications` expected a min and max stream ID, however that was not what we were passing in. Instead, let's just pass it the current max stream ID and have it track the last stream ID it got passed.
I believe that it mostly worked as we called the function for every event. However, it would break for events that got persisted out of order, i.e, that were persisted but the max stream ID wasn't incremented as not all preceding events had finished persisting, and push for that event would be delayed until another event got pushed to the effected users.
This is a config option ported over from DINUM's Sydent: https://github.com/matrix-org/sydent/pull/285
They've switched to validating 3PIDs via Synapse rather than Sydent, and would like to retain this functionality.
This original purpose for this change is phishing prevention. This solution could also potentially be replaced by a similar one to https://github.com/matrix-org/synapse/pull/8004, but across all `*/submit_token` endpoint.
This option may still be useful to enterprise even with that safeguard in place though, if they want to be absolutely sure that their employees don't follow links to other domains.
Fixes https://github.com/matrix-org/synapse/issues/8238
Alongside the delta file, some changes were also necessary to the codebase to remove references to the now defunct `populate_stats_process_rooms_2` background job. Thankfully the latter doesn't seem to have made it into any documentation yet :)
* Add shared_rooms api
* Add changelog
* Add .
* Wrap response in {"rooms": }
* linting
* Add unstable_features key
* Remove options from isort that aren't part of 5.x
`-y` and `-rc` are now default behaviour and no longer exist.
`dont-skip` is no longer required
https://timothycrosley.github.io/isort/CHANGELOG/#500-penny-july-4-2020
* Update imports to make isort happy
* Add changelog
* Update tox.ini file with correct invocation
* fix linting again for isort
* Vendor prefix unstable API
* Fix to match spec
* import Codes
* import Codes
* Use FORBIDDEN
* Update changelog.d/7785.feature
Co-authored-by: Andrew Morgan <1342360+anoadragon453@users.noreply.github.com>
* Implement get_shared_rooms_for_users
* a comma
* trailing whitespace
* Handle the easy feedback
* Switch to using runInteraction
* Add tests
* Feedback
* Seperate unstable endpoint from v2
* Add upgrade node
* a line
* Fix style by adding a blank line at EOF.
* Update synapse/storage/databases/main/user_directory.py
Co-authored-by: Tulir Asokan <tulir@maunium.net>
* Update synapse/storage/databases/main/user_directory.py
Co-authored-by: Andrew Morgan <1342360+anoadragon453@users.noreply.github.com>
* Update UPGRADE.rst
Co-authored-by: Andrew Morgan <1342360+anoadragon453@users.noreply.github.com>
* Fix UPGRADE/CHANGELOG unstable paths
unstable unstable unstable
Co-authored-by: Andrew Morgan <1342360+anoadragon453@users.noreply.github.com>
Co-authored-by: Tulir Asokan <tulir@maunium.net>
Co-authored-by: Andrew Morgan <1342360+anoadragon453@users.noreply.github.com>
Co-authored-by: Patrick Cloke <clokep@users.noreply.github.com>
Co-authored-by: Tulir Asokan <tulir@maunium.net>
... and to show that it does something slightly different to
`_get_e2e_device_keys_txn`.
`include_all_devices` and `include_deleted_devices` were never used (and
`include_deleted_devices` was broken, since that would cause `None`s in the
result which were not handled in the loop below.
Add some typing too.
#8174 removed the `is_guest` parameter from `get_room_data`, at the same time that #8157 was merged using it, colliding together to break unit tests on develop.
This PR removes the `is_guest` parameter from the call in the broken test.
Uses the same changelog as #8174.
Small cleanup PR.
* Removed the unused `is_guest` argument
* Added a safeguard to a (currently) impossible code path, fixing static checking at the same time.
==============================
Bugfixes
--------
- Fix a bug introduced in v1.19.0 where appservices with ratelimiting disabled would still be ratelimited when joining rooms. ([\#8139](https://github.com/matrix-org/synapse/issues/8139))
- Fix a bug introduced in v1.19.0 that would cause e.g. profile updates to fail due to incorrect application of rate limits on join requests. ([\#8153](https://github.com/matrix-org/synapse/issues/8153))
-----BEGIN PGP SIGNATURE-----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=0rHM
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=49ZC
-----END PGP SIGNATURE-----
Merge tag 'v1.19.1rc1' into develop
Synapse 1.19.1rc1 (2020-08-25)
==============================
Bugfixes
--------
- Fix a bug introduced in v1.19.0 where appservices with ratelimiting disabled would still be ratelimited when joining rooms. ([\#8139](https://github.com/matrix-org/synapse/issues/8139))
- Fix a bug introduced in v1.19.0 that would cause e.g. profile updates to fail due to incorrect application of rate limits on join requests. ([\#8153](https://github.com/matrix-org/synapse/issues/8153))
Add new method ratelimiter.can_requester_do_action and ensure that appservices are exempt from being ratelimited.
Co-authored-by: Patrick Cloke <clokep@users.noreply.github.com>
Co-authored-by: Erik Johnston <erik@matrix.org>
* Don't raise session_id errors on submit_token if request_token_inhibit_3pid_errors is set
* Changelog
* Also wait some time before responding to /requestToken
* Incorporate review
* Update synapse/storage/databases/main/registration.py
Co-authored-by: Andrew Morgan <1342360+anoadragon453@users.noreply.github.com>
* Incorporate review
Co-authored-by: Andrew Morgan <1342360+anoadragon453@users.noreply.github.com>
Add new method ratelimiter.can_requester_do_action and ensure that appservices are exempt from being ratelimited.
Co-authored-by: Patrick Cloke <clokep@users.noreply.github.com>
Co-authored-by: Erik Johnston <erik@matrix.org>
The function is used for two purposes: 1) for subscribers of streams to
get a token they can use to get further updates with, and 2) for
replication to track position of the writers of the stream.
For streams with a single writer the two scenarios produce the same
result, however the situation becomes complicated for streams with
multiple writers. The current `MultiWriterIdGenerator` does not
correctly handle the first case (which is not an issue as its only used
for the `caches` stream which nothing subscribes to outside of
replication).
`StatsHandler` handles updates to the `current_state_delta_stream`, and updates room stats such as the amount of state events, joined users, etc.
However, it counts every new join membership as a new user entering a room (and that user being in another room), whereas it's possible for a user's membership status to go from join -> join, for instance when they change their per-room profile information.
This PR adds a check for join->join membership transitions, and bails out early, as none of the further checks are necessary at that point.
Due to this bug, membership stats in many rooms have ended up being wildly larger than their true values. I am not sure if we also want to include a migration step which recalculates these statistics (possibly using the `_populate_stats_process_rooms` bg update).
Bug introduced in the initial implementation https://github.com/matrix-org/synapse/pull/4338.
Converts tests/rest/admin/test_room.py to have unix file endings after they were accidentally changed in #7613.
Keeping the same changelog as #7613 as it hasn't gone out in a release yet.
This table is no longer used, so we may as well stop populating it. Removing it
would prevent people rolling back to older releases of Synapse, so that can
happen in a future release.
* Fix spec compliance; tweaks without values are valid
(default to True, which is only concretely specified for
`highlight`, but it seems only reasonable to generalise)
* Changelog for 7766.
* Add documentation to `tweaks_for_actions`
May as well tidy up when I'm here.
* Add a test for `tweaks_for_actions`
The CI appears to use the latest version of isort, which is a problem when isort gets a major version bump. Rather than try to pin the version, I've done the necessary to make isort5 happy with synapse.
State res v2 across large data sets can be very CPU intensive, and if
all the relevant events are in the cache the algorithm will run from
start to finish within a single reactor tick. This can result in
blocking the reactor tick for several seconds, which can have major
repercussions on other requests.
To fix this we simply add the occaisonal `sleep(0)` during iterations to
yield execution until the next reactor tick. The aim is to only do this
for large data sets so that we don't impact otherwise quick resolutions.=
This ended up being a bit more invasive than I'd hoped for (not helped by
generic_worker duplicating some of the code from homeserver), but hopefully
it's an improvement.
The idea is that, rather than storing unstructured `dict`s in the config for
the listener configurations, we instead parse it into a structured
`ListenerConfig` object.
Fixes https://github.com/matrix-org/synapse/issues/7683
Broke in: #7649
We had a `yield` acting on a coroutine. To be fair this one is a bit difficult to notice as there's a function in the middle that just passes the coroutine along.
Fixes https://github.com/matrix-org/synapse/issues/2431
Adds config option `encryption_enabled_by_default_for_room_type`, which determines whether encryption should be enabled with the default encryption algorithm in private or public rooms upon creation. Whether the room is private or public is decided based upon the room creation preset that is used.
Part of this PR is also pulling out all of the individual instances of `m.megolm.v1.aes-sha2` into a constant variable to eliminate typos ala https://github.com/matrix-org/synapse/pull/7637
Based on #7637
While working on https://github.com/matrix-org/synapse/issues/5665 I found myself digging into the `Ratelimiter` class and seeing that it was both:
* Rather undocumented, and
* causing a *lot* of config checks
This PR attempts to refactor and comment the `Ratelimiter` class, as well as encourage config file accesses to only be done at instantiation.
Best to be reviewed commit-by-commit.
Calls `self.get_success` on all deferred methods instead of abusing `self.pump()`. This has the benefit of working with coroutines, as well as checking that method execution completed successfully.
There are also a few small cleanups that I made in the process.
It looks like `user_device_resync` was ignoring cross-signing keys from the results received from the remote server. This patch fixes this, by processing these keys using the same process `_handle_signing_key_updates` does (and effectively factor that part out of that function).
A couple of changes of significance:
* remove the `_last_ack < federation_position` condition, so that
updates will still be correctly processed after restart
* Correctly wire up send_federation_ack to the right class.
The idea here is that if an instance persists an event via the replication HTTP API it can return before we receive that event over replication, which can lead to races where code assumes that persisting an event immediately updates various caches (e.g. current state of the room).
Most of Synapse doesn't hit such races, so we don't do the waiting automagically, instead we do so where necessary to avoid unnecessary delays. We may decide to change our minds here if it turns out there are a lot of subtle races going on.
People probably want to look at this commit by commit.
When a call to `user_device_resync` fails, we don't currently mark the remote user's device list as out of sync, nor do we retry to sync it.
https://github.com/matrix-org/synapse/pull/6776 introduced some code infrastructure to mark device lists as stale/out of sync.
This commit uses that code infrastructure to mark device lists as out of sync if processing an incoming device list update makes the device handler realise that the device list is out of sync, but we can't resync right now.
It also adds a looping call to retry all failed resync every 30s. This shouldn't cause too much spam in the logs as this commit also removes the "Failed to handle device list update for..." warning logs when catching `NotRetryingDestination`.
Fixes#7418
Make sure that the AccountDataStream presents complete updates, in the right
order.
This is much the same fix as #7337 and #7358, but applied to a different stream.
==============================
Bugfixes
--------
- Fix a long-standing bug which could cause messages not to be sent over federation, when state events with state keys matching user IDs (such as custom user statuses) were received. ([\#7376](https://github.com/matrix-org/synapse/issues/7376))
- Restore compatibility with non-compliant clients during the user interactive authentication process, fixing a problem introduced in v1.13.0rc1. ([\#7483](https://github.com/matrix-org/synapse/issues/7483))
Internal Changes
----------------
- Fix linting errors in new version of Flake8. ([\#7470](https://github.com/matrix-org/synapse/issues/7470))
-----BEGIN PGP SIGNATURE-----
iQEzBAABCAAdFiEEv27Axt/F4vrTL/8QOSor00I9eP8FAl69IQ8ACgkQOSor00I9
eP87lAf8DK+v6cs2U0BoD5opzQ7ZazJT6JYTmnMBaTzHU6Wx20V2ttkF7Vpwm3WU
Zsz0048tdYtHFyYBQ1kF5RNIBBJwV8SA/QUcPkR7FVpwZMLR2q4aJn0EE7kC9OMf
tYsmdbHeBdyfLXpXzazxWlgHquLyEIt52ykAcCphjx/Jl2fAExFEhtfsxpECoJ2f
8Dqhjg3WFjd6QWU6AFkElbwHUYCdIWdJOcsC8N1p8OvBmDz5QXv/RlYipHE00Cpx
QQQOgEjdRc6dlz2mbetMklnfII3p2kO9bzNdmEpOzT0Zt7nFaGdntW4I1QA0yJfa
gows9bYMzhqYk7YSiyTYOZ4qyavVtw==
=N/zZ
-----END PGP SIGNATURE-----
Merge tag 'v1.13.0rc2' into develop
Synapse 1.13.0rc2 (2020-05-14)
==============================
Bugfixes
--------
- Fix a long-standing bug which could cause messages not to be sent over federation, when state events with state keys matching user IDs (such as custom user statuses) were received. ([\#7376](https://github.com/matrix-org/synapse/issues/7376))
- Restore compatibility with non-compliant clients during the user interactive authentication process, fixing a problem introduced in v1.13.0rc1. ([\#7483](https://github.com/matrix-org/synapse/issues/7483))
Internal Changes
----------------
- Fix linting errors in new version of Flake8. ([\#7470](https://github.com/matrix-org/synapse/issues/7470))
Fix a bug where the `get_joined_users` cache could be corrupted by custom
status events (or other state events with a state_key matching the user ID).
The bug was introduced by #2229, but has largely gone unnoticed since then.
Fixes#7099, #7373.
The aim here is to get to a stage where we have a `PersistEventStore` that holds all the write methods used during event persistence, so that we can take that class out of the `DataStore` mixin and instansiate it separately. This will allow us to instansiate it on processes other than master, while also ensuring it is only available on processes that are configured to write to events stream.
This is a bit of an architectural change, where we end up with multiple classes per data store (rather than one per data store we have now). We end up having:
1. Storage classes that provide high level APIs that can talk to multiple data stores.
2. Data store modules that consist of classes that must point at the same database instance.
3. Classes in a data store that can be instantiated on processes depending on config.
* release-v1.13.0:
Don't UPGRADE database rows
RST indenting
Put rollback instructions in upgrade notes
Fix changelog typo
Oh yeah, RST
Absolute URL it is then
Fix upgrade notes link
Provide summary of upgrade issues in changelog. Fix )
Move next version notes from changelog to upgrade notes
Changelog fixes
1.13.0rc1
Documentation on setting up redis (#7446)
Rework UI Auth session validation for registration (#7455)
Fix errors from malformed log line (#7454)
Drop support for redis.dbid (#7450)
For in memory streams when fetching updates on workers we need to query the source of the stream, which currently is hard coded to be master. This PR threads through the source instance we received via `POSITION` through to the update function in each stream, which can then be passed to the replication client for in memory streams.
We move the processing of typing and federation replication traffic into their handlers so that `Stream.current_token()` points to a valid token. This allows us to remove `get_streams_to_replicate()` and `stream_positions()`.
By persisting the user interactive authentication sessions to the database, this fixes
situations where a user hits different works throughout their auth session and also
allows sessions to persist through restarts of Synapse.
This is primarily for allowing us to send those commands from workers, but for now simply allows us to ignore echoed RDATA/POSITION commands that we sent (we get echoes of sent commands when using redis). Currently we log a WARNING on the master process every time we receive an echoed RDATA.
For direct TCP connections we need the master to relay REMOTE_SERVER_UP
commands to the other connections so that all instances get notified
about it. The old implementation just relayed to all connections,
assuming that sending back to the original sender of the command was
safe. This is not true for redis, where commands sent get echoed back to
the sender, which was causing master to effectively infinite loop
sending and then re-receiving REMOTE_SERVER_UP commands that it sent.
The fix is to ensure that we only relay to *other* connections and not
to the connection we received the notification from.
Fixes#7334.
* Factor out functions for injecting events into database
I want to add some more flexibility to the tools for injecting events into the
database, and I don't want to clutter up HomeserverTestCase with them, so let's
factor them out to a new file.
* Rework TestReplicationDataHandler
This wasn't very easy to work with: the mock wrapping was largely superfluous,
and it's useful to be able to inspect the received rows, and clear out the
received list.
* Fix AssertionErrors being thrown by EventsStream
Part of the problem was that there was an off-by-one error in the assertion,
but also the limit logic was too simple. Fix it all up and add some tests.
Specifically some tests for the typing stream, which means we test streams that fetch missing updates via HTTP (rather than via the DB).
We also shuffle things around a bit so that we create two separate `HomeServer` objects, rather than trying to insert a slaved store into places.
Note: `test_typing.py` is heavily inspired by `test_receipts.py`
First some background: StreamChangeCache is used to keep track of what "entities" have
changed since a given stream ID. So for example, we might use it to keep track of when the last
to-device message for a given user was received [1], and hence whether we need to pull any to-device messages from the database on a sync [2].
Now, it turns out that StreamChangeCache didn't support more than one thing being changed at
a given stream_id (this was part of the problem with #7206). However, it's entirely valid to send
to-device messages to more than one user at a time.
As it turns out, this did in fact work, because *some* methods of StreamChangeCache coped
ok with having multiple things changing on the same stream ID, and it seems we never actually
use the methods which don't work on the stream change caches where we allow multiple
changes at the same stream ID. But that feels horribly fragile, hence: let's update
StreamChangeCache to properly support this, and add some typing and some more tests while
we're at it.
[1]: https://github.com/matrix-org/synapse/blob/release-v1.12.3/synapse/storage/data_stores/main/deviceinbox.py#L301
[2]: https://github.com/matrix-org/synapse/blob/release-v1.12.3/synapse/storage/data_stores/main/deviceinbox.py#L47-L51
The aim here is to move the command handling out of the TCP protocol classes and to also merge the client and server command handling (so that we can reuse them for redis protocol). This PR simply moves the client paths to the new `ReplicationCommandHandler`, a future PR will move the server paths too.
Fixes#6815
Before figuring out whether we should alert a user on MAU, we call get_notice_room_for_user to get some info on the existing server notices room for this user. This function, if the room doesn't exist, creates it and invites the user in it. This means that, if we decide later that no server notice is needed, the user gets invited in a room with no message in it. This happens at every restart of the server, since the room ID returned by get_notice_room_for_user is cached.
This PR fixes that by moving the inviting bit to a dedicated function, that's only called when the server actually needs to send a notice to the user. A potential issue with this approach is that the room that's created by get_notice_room_for_user doesn't match how that same function looks for an existing room (i.e. it creates a room that doesn't have an invite or a join for the current user in it, so it could lead to a new room being created each time a user syncs), but I'm not sure this is a problem given it's cached until the server restarts, so that function won't run very often.
It also renames get_notice_room_for_user into get_or_create_notice_room_for_user to make what it does clearer.
Occasionally we could get a federation device list update transaction which
looked like:
```
[
{'edu_type': 'm.device_list_update', 'content': {'user_id': '@user:test', 'device_id': 'D2', 'prev_id': [], 'stream_id': 12, 'deleted': True}},
{'edu_type': 'm.device_list_update', 'content': {'user_id': '@user:test', 'device_id': 'D1', 'prev_id': [12], 'stream_id': 11, 'deleted': True}},
{'edu_type': 'm.device_list_update', 'content': {'user_id': '@user:test', 'device_id': 'D3', 'prev_id': [11], 'stream_id': 13, 'deleted': True}}
]
```
Having `stream_ids` which are lower than `prev_ids` looks odd. It might work
(I'm not actually sure), but in any case it doesn't seem like a reasonable
thing to expect other implementations to support.
That fallback sets the redirect URL to itself (so it can process the login
token then return gracefully to the client). This would make it pointless to
ask the user for confirmation, since the URL the confirmation page would be
showing wouldn't be the client's.
This changes the replication protocol so that the server does not send down `RDATA` for rows that happened before the client connected. Instead, the server will send a `POSITION` and clients then query the database (or master out of band) to get up to date.
* Pull Sentinel out of LoggingContext
... and drop a few unnecessary references to it
* Factor out LoggingContext.current_context
move `current_context` and `set_context` out to top-level functions.
Mostly this means that I can more easily trace what's actually referring to
LoggingContext, but I think it's generally neater.
* move copy-to-parent into `stop`
this really just makes `start` and `stop` more symetric. It also means that it
behaves correctly if you manually `set_log_context` rather than using the
context manager.
* Replace `LoggingContext.alive` with `finished`
Turn `alive` into `finished` and make it a bit better defined.
* Add 'device_lists_outbound_pokes' as extra table.
This makes sure we check all the relevant tables to get the current max
stream ID.
Currently not doing so isn't problematic as the max stream ID in
`device_lists_outbound_pokes` is the same as in `device_lists_stream`,
however that will change.
* Change device lists stream to have one row per id.
This will make it possible to process the streams more incrementally,
avoiding having to process large chunks at once.
* Change device list replication to match new semantics.
Instead of sending down batches of user ID/host tuples, send down a row
per entity (user ID or host).
* Newsfile
* Remove handling of multiple rows per ID
* Fix worker handling
* Comments from review
It was originally implemented by pulling the full auth chain of all
state sets out of the database and doing set comparison. However, that
can take a lot work if the state and auth chains are large.
Instead, lets try and fetch the auth chains at the same time and
calculate the difference on the fly, allowing us to bail early if all
the auth chains converge. Assuming that the auth chains do converge more
often than not, this should improve performance. Hopefully.
When we get an invite over federation, store the room version in the rooms table.
The general idea here is that, when we pull the invite out again, we'll want to know what room_version it belongs to (so that we can later redact it if need be). So we need to store it somewhere...
The state res v2 algorithm only cares about the difference between auth
chains, so we can pass in the known common state to the `get_auth_chain`
storage function so that it can ignore those events.
* Reject device display names that are too long.
Too long is currently defined as 100 characters in length.
* Add a regression test for rejecting a too long device display name.
These are easier to work with than the strings and we normally have one around.
This fixes `FederationHander._persist_auth_tree` which was passing a
RoomVersion object into event_auth.check instead of a string.
There are quite a few places that we assume that a redaction event has a
corresponding `redacts` key, which is not always the case. So lets
cheekily make it so that event.redacts just returns None instead.
* Port synapse.replication.tcp to async/await
* Newsfile
* Correctly document type of on_<FOO> functions as async
* Don't be overenthusiastic with the asyncing....
Currently we rely on `current_state_events` to figure out what rooms a
user was in and their last membership event in there. However, if the
server leaves the room then the table may be cleaned up and that
information is lost. So lets add a table that separately holds that
information.
This was ill-advised. We can't modify verify_keys here, because the response
object has already been signed by the requested key.
Furthermore, it's somewhat unnecessary because existing versions of Synapse
(which get upset that the notary key isn't present in verify_keys) will fall
back to a direct fetch via `/key/v2/server`.
Also: more tests for fetching keys via perspectives: it would be nice if we actually tested when our fetcher can't talk to our notary impl.
* Kill off redundant SynapseRequestFactory
We already get the Site via the Channel, so there's no need for a dedicated
RequestFactory: we can just use the right constructor.
* Workaround for error when fetching notary's own key
As a notary server, when we return our own keys, include all of our signing
keys in verify_keys.
This is a workaround for #6596.
* Remove redundant python2 support code
`str.decode()` doesn't exist on python3, so presumably this code was doing
nothing
* Filter out pushers with corrupt data
When we get a row with unparsable json, drop the row, rather than returning a
row with null `data`, which will then cause an explosion later on.
* Improve logging when we can't start a pusher
Log the ID to help us understand the problem
* Make email pusher setup more robust
We know we'll have a `data` member, since that comes from the database. What we
*don't* know is if that is a dict, and if that has a `brand` member, and if
that member is a string.
Implement part [MSC2228](https://github.com/matrix-org/matrix-doc/pull/2228). The parts that differ are:
* the feature is hidden behind a configuration flag (`enable_ephemeral_messages`)
* self-destruction doesn't happen for state events
* only implement support for the `m.self_destruct_after` field (not the `m.self_destruct` one)
* doesn't send synthetic redactions to clients because for this specific case we consider the clients to be able to destroy an event themselves, instead we just censor it (by pruning its JSON) in the database
Fixes a bug where rejected events were persisted with the wrong state group.
Also fixes an occasional internal-server-error when receiving events over
federation which are rejected and (possibly because they are
backwards-extremities) have no prev_group.
Fixes#6289.
The intention here is to make it clearer which fields we can expect to be
populated when: notably, that the _event_type etc aren't used for the
synchronous impl of EventContext.
The `http_proxy` and `HTTPS_PROXY` env vars can be set to a `host[:port]` value which should point to a proxy.
The address of the proxy should be excluded from IP blacklists such as the `url_preview_ip_range_blacklist`.
The proxy will then be used for
* push
* url previews
* phone-home stats
* recaptcha validation
* CAS auth validation
It will *not* be used for:
* Application Services
* Identity servers
* Outbound federation
* In worker configurations, connections from workers to masters
Fixes#4198.
This makes it easier to use in an async/await world.
Also fixes a bug where cache descriptors would occaisonally return a raw
value rather than a deferred.
* Fix presence timeouts when synchrotron restarts.
Handling timeouts would fail if there was an external process that had
timed out, e.g. a synchrotron restarting. This was due to a couple of
variable name typoes.
Fixes#3715.
This fixed the weirdness of 400 vs 404 as http status code in the case
the filter id is not known by the server.
As e.g. matrix-js-sdk expects 404 to catch this situation this leads
to unwanted behaviour.
Hopefully this will fix the occasional failures we were seeing in the room directory.
The problem was that events are not necessarily persisted (and `current_state_delta_stream` updated) in the same order as their stream_id. So for instance current_state_delta 9 might be persisted *before* current_state_delta 8. Then, when the room stats saw stream_id 9, it assumed it had done everything up to 9, and never came back to do stream_id 8.
We can solve this easily by only processing up to the stream_id where we know all events have been persisted.
We have set the max retry interval to a value larger than a postgres or
sqlite int can hold, which caused exceptions when updating the
destinations table.
To fix postgres we need to change the column to a bigint, and for sqlite
we lower the max interval to 2**62 (which is still incredibly long).
Pull the checkers out to their own classes, rather than having them lost in a
massive 1000-line class which does everything.
This is also preparation for some more intelligent advertising of flows, as per #6100
because, frankly, it looked like it was written by an axe-murderer.
This should be a non-functional change, except that where `m.login.dummy` was
previously advertised *before* `m.login.terms`, it will now be advertised
afterwards. AFAICT that should have no effect, and will be more consistent with
the flows that involve passing a 3pid.
This is a) simpler than querying user_ips directly and b) means we can
purge older entries from user_ips without losing the required info.
The storage functions now no longer return the access_token, since it
was unused.
This allows support users to be created even on MAU limits via
the admin API. Support users are excluded from MAU after creation,
so it makes sense to exclude them in creation - except if the
whole host is in disabled state.
Signed-off-by: Jason Robinson <jasonr@matrix.org>
Previously if the first registered user was a "support" or "bot" user,
when the first real user registers, the auto-join rooms were not
created.
Fix to exclude non-real (ie users with a special user type) users
when counting how many users there are to determine whether we should
auto-create a room.
Signed-off-by: Jason Robinson <jasonr@matrix.org>
Python will return a tuple whether there are parentheses around the returned values or not.
I'm just sick of my editor complaining about this all over the place :)
Template config files
* Imagine a system composed entirely of x, y, z etc and the basic operations..
Wait George, why XOR? Why not just neq?
George: Eh, I didn't think of that..
Co-Authored-By: Erik Johnston <erik@matrix.org>
Get rid of the labyrinthine `recoverer_fn` code, and clean up the startup code
(it seemed to be previously inexplicably split between
`ApplicationServiceScheduler.start` and `_Recoverer.start`).
Add some docstrings too.
This refactors MatrixFederationAgent to move the SRV lookup into the
endpoint code, this has two benefits:
1. Its easier to retry different host/ports in the same way as
HostnameEndpoint.
2. We avoid SRV lookups if we have a free connection in the pool
If we have recently seen a valid well-known for a domain we want to
retry on (non-final) errors a few times, to handle temporary blips in
networking/etc.
This gives a bit of a grace period where we can attempt to refetch a
remote `well-known`, while still using the cached result if that fails.
Hopefully this will make the well-known resolution a bit more torelant
of failures, rather than it immediately treating failures as "no result"
and caching that for an hour.
It costs both us and the remote server for us to fetch the well known
for every single request we send, so we add a minimum cache period. This
is set to 5m so that we still honour the basic premise of "refetch
frequently".
The `expire_access_token` didn't do what it sounded like it should do. What it
actually did was make Synapse enforce the 'time' caveat on macaroons used as
access tokens, but since our access token macaroons never contained such a
caveat, it was always a no-op.
(The code to add 'time' caveats was removed back in v0.18.5, in #1656)
There was some inconsistent behaviour in the caching layer around how
exceptions were handled - particularly synchronously-thrown ones.
This seems to be most easily handled by pushing the creation of
ObservableDeferreds down from CacheDescriptor to the Cache.
--------
- Fix a regression introduced in v1.2.0rc1 which led to incorrect labels on some prometheus metrics. ([\#5734](https://github.com/matrix-org/synapse/issues/5734))
-----BEGIN PGP SIGNATURE-----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=+JBn
-----END PGP SIGNATURE-----
Merge tag 'v1.2.0rc2' into develop
Bugfixes
--------
- Fix a regression introduced in v1.2.0rc1 which led to incorrect labels on some prometheus metrics. ([\#5734](https://github.com/matrix-org/synapse/issues/5734))
* Fix servlet metric names
Co-Authored-By: Richard van der Hoff <1389908+richvdh@users.noreply.github.com>
* Remove redundant check
* Cover all return paths
We can now use `_get_events_from_cache_or_db` rather than going right back to
the database, which means that (a) we can benefit from caching, and (b) it
opens the way forward to more extensive checks on the original event.
We now always require the original event to exist before we will serve up a
redaction.
First of all, let's get rid of `TOKEN_NOT_FOUND_HTTP_STATUS`. It was a hack we
did at one point when it was possible to return either a 403 or a 401 if the
creds were missing. We always return a 401 in these cases now (thankfully), so
it's not needed.
Let's also stop abusing `AuthError` for these cases. Honestly they have nothing
that relates them to the other places that `AuthError` is used, other than the
fact that they are loosely under the 'Auth' banner. It makes no sense for them
to share exception classes.
Instead, let's add a couple of new exception classes: `InvalidClientTokenError`
and `MissingClientTokenError`, for the `M_UNKNOWN_TOKEN` and `M_MISSING_TOKEN`
cases respectively - and an `InvalidClientCredentialsError` base class for the
two of them.
this is only used in one place, so it's clearer if we inline it and reduce the
API surface.
Also, fixes a buglet where we would create an access token even if we were
about to block the user (we would never return the AT, so the user could never
use it, but it was still created and added to the db.)
When asking for the relations of an event, include the original event in the response. This will mostly be used for efficiently showing edit history, but could be useful in other circumstances.
Nothing uses this now, so we can remove the dead code, and clean up the
API.
Since we're changing the shape of the return value anyway, we take the
opportunity to give the method a better name.
- Put the default window_size back to 1000ms (broken by #5181)
- Make the `rc_federation` config actually do something
- fix an off-by-one error in the 'concurrent' limit
- Avoid creating an unused `_PerHostRatelimiter` object for every single
incoming request
Adds new config option `cleanup_extremities_with_dummy_events` which
periodically sends dummy events to rooms with more than 10 extremities.
THIS IS REALLY EXPERIMENTAL.
Some keys are stored in the synapse database with a null valid_until_ms
which caused an exception to be thrown when using that key. We fix this
by treating nulls as zeroes, i.e. they keys will match verification
requests with a minimum_valid_until_ms of zero (i.e. don't validate ts)
but will not match requests with a non-zero minimum_valid_until_ms.
Fixes#5391.
Sends password reset emails from the homeserver instead of proxying to the identity server. This is now the default behaviour for security reasons. If you wish to continue proxying password reset requests to the identity server you must now enable the email.trust_identity_server_for_password_resets option.
This PR is a culmination of 3 smaller PRs which have each been separately reviewed:
* #5308
* #5345
* #5368
There are a few changes going on here:
* We make checking the signature on a key server response optional: if no
verify_keys are specified, we trust to TLS to validate the connection.
* We change the default config so that it does not require responses to be
signed by the old key.
* We replace the old 'perspectives' config with 'trusted_key_servers', which
is also formatted slightly differently.
* We emit a warning to the logs every time we trust a key server response
signed by the old key.
* Fix background updates to handle redactions/rejections
In background updates based on current state delta stream we need to
handle that we may not have all the events (or at least that
`get_events` may raise an exception).
Also:
* rename VerifyKeyRequest->VerifyJsonRequest
* calculate key_ids on VerifyJsonRequest construction
* refactor things to pass around VerifyJsonRequests instead of 4-tuples
When handling incoming federation requests, make sure that we have an
up-to-date copy of the signing key.
We do not yet enforce the validity period for event signatures.
When enabling the account validity feature, Synapse will look at startup for registered account without an expiration date, and will set one equals to 'now + validity_period' for them. On large servers, it can mean that a large number of users will have the same expiration date, which means that they will all be sent a renewal email at the same time, which isn't ideal.
In order to mitigate this, this PR allows server admins to define a 'max_delta' so that the expiration date is a random value in the [now + validity_period ; now + validity_period + max_delta] range. This allows renewal emails to be progressively sent over a configured period instead of being sent all in one big batch.
The list of server names was redundant, since it was equivalent to the keys on
the server_to_deferred map. This reduces the number of large lists being passed
around, and has the benefit of deduplicating the entries in `wait_on`.
Replaces DEFAULT_ROOM_VERSION constant with a method that first checks the config, then returns a hardcoded value if the option is not present.
That hardcoded value is now located in the server.py config file.
Rather than have three methods which have to have the same interface,
factor out a separate interface which is provided by three implementations.
I find it easier to grok the code this way.
This is a first step to checking that the key is valid at the required moment.
The idea here is that, rather than passing VerifyKey objects in and out of the
storage layer, we instead pass FetchKeyResult objects, which simply wrap the
VerifyKey and add a valid_until_ts field.
Storing server keys hammered the database a bit. This replaces the
implementation which stored a single key, with one which can do many updates at
once.
If account validity is enabled in the server's configuration, this job will run at startup as a background job and will stick an expiration date to any registered account missing one.
Prevents a SynapseError being raised inside of a IResolutionReceiver and instead opts to just return 0 results. This thus means that we have to lump a failed lookup and a blacklisted lookup together with the same error message, but the substitute should be generic enough to cover both cases.
This commit adds two config options:
* `restrict_public_rooms_to_local_users`
Requires auth to fetch the public rooms directory through the CS API and disables fetching it through the federation API.
* `require_auth_for_profile_requests`
When set to `true`, requires that requests to `/profile` over the CS API are authenticated, and only returns the user's profile if the requester shares a room with the profile's owner, as per MSC1301.
MSC1301 also specifies a behaviour for federation (only returning the profile if the server asking for it shares a room with the profile's owner), but that's currently really non-trivial to do in a not too expensive way. Next step is writing down a MSC that allows a HS to specify which user sent the profile query. In this implementation, Synapse won't send a profile query over federation if it doesn't believe it already shares a room with the profile's owner, though.
Groups have been intentionally omitted from this commit.
This endpoint isn't much use for its intended purpose if you first need to get
yourself an admin's auth token.
I've restricted it to the `/_synapse/admin` path to make it a bit easier to
lock down for those concerned about exposing this information. I don't imagine
anyone is using it in anger currently.
Hopefully this time we really will fix#4422.
We need to make sure that the cache on
`get_rooms_for_user_with_stream_ordering` is invalidated *before* the
SyncHandler is notified for the new events, and we can now do so reliably via
the `events` stream.
I don't have a database with the same name as my user, so leaving the database
name unset fails.
While we're at it, clear out some unused stuff in the test setup.
As per #3622, we remove trailing slashes from outbound federation requests. However, to ensure that we remain backwards compatible with previous versions of Synapse, if we receive a HTTP 400 with `M_UNRECOGNIZED`, then we are likely talking to an older version of Synapse in which case we retry with a trailing slash appended to the request path.
