If `room_list_publication_rules` was configured with a rule with a
non-wildcard alias and a room was created with an alias then an
internal server error would have been thrown.
This fixes the error and properly applies the publication rules
during room creation.
* remove code legacy code related to deprecated config flag "trust_identity_server_for_password_resets" from synapse/config/emailconfig.py
* remove legacy code supporting depreciated config flag "trust_identity_server_for_password_resets" from synapse/config/registration.py
* remove legacy code supporting depreciated config flag "trust_identity_server_for_password_resets" from synapse/handlers/identity.py
* add tests to ensure config error is thrown and synapse refuses to start when depreciated config flag is found
* add changelog
* slightly change behavior to only check for deprecated flag if set to 'true'
* Update changelog.d/11333.misc
Co-authored-by: reivilibre <oliverw@matrix.org>
Co-authored-by: reivilibre <oliverw@matrix.org>
Adds validation to the Client-Server API to ensure that
the potential thread head does not relate to another event
already. This results in not allowing a thread to "fork" into
other threads.
If the target event is unknown for some reason (maybe it isn't
visible to your homeserver), but is the target of other events
it is assumed that the thread can be created from it. Otherwise,
it is rejected as an unknown event.
* Prefer `HTTPStatus` over plain `int`
This is an Opinion that no-one has seemed to object to yet.
* `--disallow-untyped-defs` for `tests.rest.client.test_directory`
* Improve synapse's annotations for deleting aliases
* Test case for deleting a room alias
* Changelog
Co-authored-by: Dirk Klimpel <5740567+dklimpel@users.noreply.github.com>
Co-authored-by: Andrew Morgan <1342360+anoadragon453@users.noreply.github.com>
This is the final piece of the jigsaw for #9595. As with other changes before this one (eg #10771), we need to make sure that we auth the auth events in the right order, and actually check that their predecessors haven't been rejected.
To do this I've reused the existing code we use when persisting outliers elsewhere.
I've removed the code for attempting to fetch missing auth_events - the events should have been present in the send_join response, so the likely reason they are missing is that we couldn't verify them, so requesting them again is unlikely to help. Instead, we simply drop any state which relies on those auth events, as we do at a backwards-extremity. See also matrix-org/complement#216 for a test for this.
* We only need to fetch users in private rooms
* Filter out `user_id` at the top
* Discard excluded users in the top loop
We weren't doing this in the "First, if they're our user" branch so this
is a bugfix.
* The caller must check that `user_id` is included
This is in the docstring. There are two call sites:
- one in `_handle_room_publicity_change`, which explicitly checks before calling;
- and another in `_handle_room_membership_event`, which returns early if
the user is excluded.
So this change is safe.
* Test joining a private room with an excluded user
* Tweak an existing test
* Changelog
* test docstring
* lint
Currently, when we receive an event whose auth_events differ from those we expect, we state-resolve between the two state sets, and check that the event passes auth based on the resolved state.
This means that it's possible for us to accept events which don't pass auth at their declared auth_events (or where the auth events themselves were rejected), leading to problems down the line like #10083.
This change means we will:
* ignore any events where we cannot find the auth events
* reject any events whose auth events were rejected
* reject any events which do not pass auth at their declared auth_events.
Together with a whole raft of previous work, this is a partial fix to #9595.
Fixes#6643.
Based on #11009.
This fixes a bug where we would accept an event whose `auth_events` include
rejected events, if the rejected event was shadowed by another `auth_event`
with same `(type, state_key)`.
The approach is to pass a list of auth events into
`check_auth_rules_for_event` instead of a dict, which of course means updating
the call sites.
This is an extension of #10956.
Found while working on the Gitter backfill script and noticed
it only happened after we sent 7 batches, https://gitlab.com/gitterHQ/webapp/-/merge_requests/2229#note_665906390
When there are more than 5 backward extremities for a given depth,
backfill will throw an error because we sliced the extremity list
to 5 but then try to iterate over the full list. This causes
us to look for state that we never fetched and we get a `KeyError`.
Before when calling `/messages` when there are more than 5 backward extremities:
```
Traceback (most recent call last):
File "/usr/local/lib/python3.8/site-packages/synapse/http/server.py", line 258, in _async_render_wrapper
callback_return = await self._async_render(request)
File "/usr/local/lib/python3.8/site-packages/synapse/http/server.py", line 446, in _async_render
callback_return = await raw_callback_return
File "/usr/local/lib/python3.8/site-packages/synapse/rest/client/room.py", line 580, in on_GET
msgs = await self.pagination_handler.get_messages(
File "/usr/local/lib/python3.8/site-packages/synapse/handlers/pagination.py", line 396, in get_messages
await self.hs.get_federation_handler().maybe_backfill(
File "/usr/local/lib/python3.8/site-packages/synapse/handlers/federation.py", line 133, in maybe_backfill
return await self._maybe_backfill_inner(room_id, current_depth, limit)
File "/usr/local/lib/python3.8/site-packages/synapse/handlers/federation.py", line 386, in _maybe_backfill_inner
likely_extremeties_domains = get_domains_from_state(states[e_id])
KeyError: '$zpFflMEBtZdgcMQWTakaVItTLMjLFdKcRWUPHbbSZJl'
```
Resolve and share `state_groups` for all historical events in batch. This also helps for showing the appropriate avatar/displayname in Element and will work whenever `/messages` has one of the historical messages as the first message in the batch.
This does have the flaw where if you just insert a single historical event somewhere, it probably won't resolve the state correctly from `/messages` or `/context` since it will grab a non historical event above or below with resolved state which never included the historical state back then. For the same reasions, this also does not work in Element between the transition from actual messages to historical messages. In the Gitter case, this isn't really a problem since all of the historical messages are in one big lump at the beginning of the room.
For a future iteration, might be good to look at `/messages` and `/context` to additionally add the `state` for any historical messages in that batch.
---
How are the `state_groups` shared? To illustrate the `state_group` sharing, see this example:
**Before** (new `state_group` for every event 😬, very inefficient):
```
# Tests from https://github.com/matrix-org/complement/pull/206
$ COMPLEMENT_ALWAYS_PRINT_SERVER_LOGS=1 COMPLEMENT_DIR=../complement ./scripts-dev/complement.sh TestBackfillingHistory/parallel/should_resolve_member_state_events_for_historical_events
create_new_client_event m.room.member event=$_JXfwUDIWS6xKGG4SmZXjSFrizhARM7QblhATVWWUcA state_group=None
create_new_client_event org.matrix.msc2716.insertion event=$1ZBfmBKEjg94d-vGYymKrVYeghwBOuGJ3wubU1-I9y0 state_group=9
create_new_client_event org.matrix.msc2716.insertion event=$Mq2JvRetTyclPuozRI682SAjYp3GqRuPc8_cH5-ezPY state_group=10
create_new_client_event m.room.message event=$MfmY4rBQkxrIp8jVwVMTJ4PKnxSigpG9E2cn7S0AtTo state_group=11
create_new_client_event m.room.message event=$uYOv6V8wiF7xHwOMt-60d1AoOIbqLgrDLz6ZIQDdWUI state_group=12
create_new_client_event m.room.message event=$PAbkJRMxb0bX4A6av463faiAhxkE3FEObM1xB4D0UG4 state_group=13
create_new_client_event org.matrix.msc2716.batch event=$Oy_S7AWN7rJQe_MYwGPEy6RtbYklrI-tAhmfiLrCaKI state_group=14
```
**After** (all events in batch sharing `state_group=10`) (the base insertion event has `state_group=8` which matches the `prev_event` we're inserting next to):
```
# Tests from https://github.com/matrix-org/complement/pull/206
$ COMPLEMENT_ALWAYS_PRINT_SERVER_LOGS=1 COMPLEMENT_DIR=../complement ./scripts-dev/complement.sh TestBackfillingHistory/parallel/should_resolve_member_state_events_for_historical_events
create_new_client_event m.room.member event=$PWomJ8PwENYEYuVNoG30gqtybuQQSZ55eldBUSs0i0U state_group=None
create_new_client_event org.matrix.msc2716.insertion event=$e_mCU7Eah9ABF6nQU7lu4E1RxIWccNF05AKaTT5m3lw state_group=9
create_new_client_event org.matrix.msc2716.insertion event=$ui7A3_GdXIcJq0C8GpyrF8X7B3DTjMd_WGCjogax7xU state_group=10
create_new_client_event m.room.message event=$EnTIM5rEGVezQJiYl62uFBl6kJ7B-sMxWqe2D_4FX1I state_group=10
create_new_client_event m.room.message event=$LGx5jGONnBPuNhAuZqHeEoXChd9ryVkuTZatGisOPjk state_group=10
create_new_client_event m.room.message event=$wW0zwoN50lbLu1KoKbybVMxLbKUj7GV_olozIc5i3M0 state_group=10
create_new_client_event org.matrix.msc2716.batch event=$5ZB6dtzqFBCEuMRgpkU201Qhx3WtXZGTz_YgldL6JrQ state_group=10
```
* Pull out `_handle_room_membership_event`
* Discard excluded users early
* Rearrange logic so the change is membership is effectively switched over. See PR for rationale.
This splits apart `handle_new_user` into a function which adds an entry to the `user_directory` and a function which updates the room sharing tables. I plan to continue doing more of this kind of refactoring to clarify the implementation.
The shared ratelimit function was replaced with a dedicated
RequestRatelimiter class (accessible from the HomeServer
object).
Other properties were copied to each sub-class that inherited
from BaseHandler.
This removes the magic allowing accessing configurable
variables directly from the config object. It is now required
that a specific configuration class is used (e.g. `config.foo`
must be replaced with `config.server.foo`).
Fix a long-standing bug where a batch of user directory changes would be
silently dropped if the server left a room early in the batch.
* Pull out `wait_for_background_update` in tests
Co-authored-by: Patrick Cloke <clokep@users.noreply.github.com>
Co-authored-by: Richard van der Hoff <1389908+richvdh@users.noreply.github.com>
We correctly allowed using the MSC2716 batch endpoint for
the room creator in existing room versions but accidentally didn't track
the events because of a logic flaw.
This prevented you from connecting subsequent chunks together because it would
throw the unknown batch ID error.
We only want to process MSC2716 events when:
- The room version supports MSC2716
- Any room where the homeserver has the `msc2716_enabled` experimental feature enabled and the event is from the room creator
`_check_event_auth` is only called in two places, and only one of those sets
`send_on_behalf_of`. Warming the cache isn't really part of auth anyway, so
moving it out makes a lot more sense.
There's little point in doing a fancy state reconciliation dance if the event
itself is invalid.
Likewise, there's no point checking it again in `_check_for_soft_fail`.
* add test
* add function to remove user from monthly active table in deactivate code
* add function to remove user from monthly active table
* add changelog entry
* update changelog number
* requested changes
* update docstring on new function
* fix lint error
* Update synapse/storage/databases/main/monthly_active_users.py
Co-authored-by: Richard van der Hoff <1389908+richvdh@users.noreply.github.com>
Co-authored-by: Richard van der Hoff <1389908+richvdh@users.noreply.github.com>
* Introduce `should_include_local_users_in_dir`
We exclude three kinds of local users from the user_directory tables. At
present we don't consistently exclude all three in the same places. This
commit introduces a new function to gather those exclusion conditions
together. Because we have to handle local and remote users in different
ways, I've made that function only consider the case of remote users.
It's the caller's responsibility to make the local versus remote
distinction clear and correct.
A test fixup is required. The test now hits a path which makes db
queries against the users table. The expected rows were missing, because
we were using a dummy user that hadn't actually been registered.
We also add new test cases to covert the exclusion logic.
----
By my reading this makes these changes:
* When an app service user registers or changes their profile, they will
_not_ be added to the user directory. (Previously only support and
deactivated users were excluded). This is consistent with the logic that
rebuilds the user directory. See also [the discussion
here](https://github.com/matrix-org/synapse/pull/10914#discussion_r716859548).
* When rebuilding the directory, exclude support and disabled users from
room sharing tables. Previously only appservice users were excluded.
* Exclude all three categories of local users when rebuilding the
directory. Previously `_populate_user_directory_process_users` didn't do
any exclusion.
Co-authored-by: Richard van der Hoff <1389908+richvdh@users.noreply.github.com>
This fixes a "Event not signed by authorising server" error when
transition room member from join -> join, e.g. when updating a
display name or avatar URL for restricted rooms.
==============================
Bugfixes
--------
- Fix a bug introduced in v1.44.0rc1 which caused the experimental [MSC2716](https://github.com/matrix-org/matrix-doc/pull/2716) `/batch_send` endpoint to return a 500 error. ([\#10938](https://github.com/matrix-org/synapse/issues/10938))
- Fix a bug introduced in v1.44.0rc1 which prevented sending presence events to application services. ([\#10944](https://github.com/matrix-org/synapse/issues/10944))
Improved Documentation
----------------------
- Minor updates to the installation instructions. ([\#10919](https://github.com/matrix-org/synapse/issues/10919))
-----BEGIN PGP SIGNATURE-----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=aEUS
-----END PGP SIGNATURE-----
Merge tag 'v1.44.0rc2' into develop
Synapse 1.44.0rc2 (2021-09-30)
==============================
Bugfixes
--------
- Fix a bug introduced in v1.44.0rc1 which caused the experimental [MSC2716](https://github.com/matrix-org/matrix-doc/pull/2716) `/batch_send` endpoint to return a 500 error. ([\#10938](https://github.com/matrix-org/synapse/issues/10938))
- Fix a bug introduced in v1.44.0rc1 which prevented sending presence events to application services. ([\#10944](https://github.com/matrix-org/synapse/issues/10944))
Improved Documentation
----------------------
- Minor updates to the installation instructions. ([\#10919](https://github.com/matrix-org/synapse/issues/10919))
This follows a correction made in twisted/twisted#1664 and should fix our Twisted Trial CI job.
Until that change is in a twisted release, we'll have to ignore the type
of the `host` argument. I've raised #10899 to remind us to review the
issue in a few months' time.
Fix event context for outlier causing failures in all of the MSC2716
Complement tests.
The `EventContext.for_outlier` refactor happened in
https://github.com/matrix-org/synapse/pull/10883
and this spot was left out.
Broadly, the existing `event_auth.check` function has two parts:
* a validation section: checks that the event isn't too big, that it has the rught signatures, etc.
This bit is independent of the rest of the state in the room, and so need only be done once
for each event.
* an auth section: ensures that the event is allowed, given the rest of the state in the room.
This gets done multiple times, against various sets of room state, because it forms part of
the state res algorithm.
Currently, this is implemented with `do_sig_check` and `do_size_check` parameters, but I think
that makes everything hard to follow. Instead, we split the function in two and call each part
separately where it is needed.
* Inline `_check_event_auth` for outliers
When we are persisting an outlier, most of `_check_event_auth` is redundant:
* `_update_auth_events_and_context_for_auth` does nothing, because the
`input_auth_events` are (now) exactly the event's auth_events,
which means that `missing_auth` is empty.
* we don't care about soft-fail, kicking guest users or `send_on_behalf_of`
for outliers
... so the only thing that matters is the auth itself, so let's just do that.
* `_auth_and_persist_fetched_events_inner`: de-async `prep`
`prep` no longer calls any `async` methods, so let's make it synchronous.
* Simplify `_check_event_auth`
We no longer need to support outliers here, which makes things rather simpler.
* changelog
* lint
This is in the context of creating new module callbacks that modules in https://github.com/matrix-org/synapse-dinsic can use, in an effort to reconcile the spam checker API in synapse-dinsic with the one in mainline.
This adds a callback that's fairly similar to user_may_create_room except it also allows processing based on the invites sent at room creation.
* Factor more stuff out of `_get_events_and_persist`
It turns out that the event-sorting algorithm in `_get_events_and_persist` is
also useful in other circumstances. Here we move the current
`_auth_and_persist_fetched_events` to `_auth_and_persist_fetched_events_inner`,
and then factor the sorting part out to `_auth_and_persist_fetched_events`.
* `_get_remote_auth_chain_for_event`: remove redundant `outlier` assignment
`get_event_auth` returns events with the outlier flag already set, so this is
redundant (though we need to update a test where `get_event_auth` is mocked).
* `_get_remote_auth_chain_for_event`: move existing-event tests earlier
Move a couple of tests outside the loop. This is a bit inefficient for now, but
a future commit will make it better. It should be functionally identical.
* `_get_remote_auth_chain_for_event`: use `_auth_and_persist_fetched_events`
We can use the same codepath for persisting the events fetched as part of an
auth chain as for those fetched individually by `_get_events_and_persist` for
building the state at a backwards extremity.
* `_get_remote_auth_chain_for_event`: use a dict for efficiency
`_auth_and_persist_fetched_events` sorts the events itself, so we no longer
need to care about maintaining the ordering from `get_event_auth` (and no
longer need to sort by depth in `get_event_auth`).
That means that we can use a map, making it easier to filter out events we
already have, etc.
* changelog
* `_auth_and_persist_fetched_events`: improve docstring
Combine the two loops over the list of events, and hence get rid of
`_NewEventInfo`. Also pass the event back alongside the context, so that it's
easier to process the result.
* Reload auth events from db after fetching and persisting
In `_update_auth_events_and_context_for_auth`, when we fetch the remote auth
tree and persist the returned events: load the missing events from the database
rather than using the copies we got from the remote server.
This is mostly in preparation for additional refactors, but does have an
advantage in that if we later get around to checking the rejected status, we'll
be able to make use of it.
* Factor out `_get_remote_auth_chain_for_event` from `_update_auth_events_and_context_for_auth`
* changelog
Co-authored-by: Dirk Klimpel <5740567+dklimpel@users.noreply.github.com>
Co-authored-by: reivilibre <olivier@librepush.net>
Co-authored-by: Richard van der Hoff <1389908+richvdh@users.noreply.github.com>
This avoids the overhead of searching through the various
configuration classes by directly referencing the class that
the attributes are in.
It also improves type hints since mypy can now resolve the
types of the configuration variables.
Constructing an EventContext for an outlier is actually really simple, and
there's no sense in going via an `async` method in the `StateHandler`.
This also means that we can resolve a bunch of FIXMEs.
It's a simplification, but one that'll help make the user directory logic easier
to follow with the other changes upcoming. It's not strictly required for those
changes, but this will help simplify the resulting logic that listens for
`m.room.member` events and generally make the logic easier to follow.
This means the config option `search_all_users` ends up controlling the
search query only, and not the data we store. The cost of doing so is an
extra row in the `user_directory` and `user_directory_search` tables for
each local user which
- belongs to no public rooms
- belongs to no private rooms of size ≥ 2
I think the cost of this will be marginal (since they'll already have entries
in `users` and `profiles` anyway).
As a small upside, a homeserver whose directory was built with this
change can toggle `search_all_users` without having to rebuild their
directory.
Co-authored-by: Richard van der Hoff <1389908+richvdh@users.noreply.github.com>
Adds missing type hints to methods in the synapse.handlers
module and requires all methods to have type hints there.
This also removes the unused construct_auth_difference method
from the FederationHandler.
We added a bunch of spans in #10704, but this ended up adding a lot of
redundant spans for rooms where nothing changed, so instead we only
start the span if there might be something interesting going on.
I had one of these error messages yesterday and assumed it was an
invalid auth token (because that was an HTTP query parameter in the
test) I was working on. In fact, it was an invalid next batch token for
syncing.
I think I have finally teased apart the codepaths which handle outliers, and those that handle non-outliers.
Let's add some assertions to demonstrate my newfound knowledge.
If we're persisting an event E which has auth_events A1, A2, then we ought to make sure that we correctly auth
and persist A1 and A2, before we blindly accept E.
This PR does part of that - it persists the auth events first - but it does not fully solve the problem, because we
still don't check that the auth events weren't rejected.
The full event content cannot be trusted from this API (as no auth
chain, etc.) is processed over federation. Returning the full event
content was a bug as MSC2946 specifies that only the stripped
state should be returned.
This also avoids calculating aggregations / annotations which go
unused.
This is part of my ongoing war against BaseHandler. I've moved kick_guest_users into RoomMemberHandler (since it calls out to that handler anyway), and split maybe_kick_guest_users into the two places it is called.
* Allow room creator to send MSC2716 related events in existing room versions
Discussed at https://github.com/matrix-org/matrix-doc/pull/2716/#discussion_r682474869
Restoring `get_create_event_for_room_txn` from,
44bb3f0cf5
* Add changelog
* Stop people from trying to redact MSC2716 events in unsupported room versions
* Populate rooms.creator column for easy lookup
> From some [out of band discussion](https://matrix.to/#/!UytJQHLQYfvYWsGrGY:jki.re/$p2fKESoFst038x6pOOmsY0C49S2gLKMr0jhNMz_JJz0?via=jki.re&via=matrix.org), my plan is to use `rooms.creator`. But currently, we don't fill in `creator` for remote rooms when a user is invited to a room for example. So we need to add some code to fill in `creator` wherever we add to the `rooms` table. And also add a background update to fill in the rows missing `creator` (we can use the same logic that `get_create_event_for_room_txn` is doing by looking in the state events to get the `creator`).
>
> https://github.com/matrix-org/synapse/pull/10566#issuecomment-901616642
* Remove and switch away from get_create_event_for_room_txn
* Fix no create event being found because no state events persisted yet
* Fix and add tests for rooms creator bg update
* Populate rooms.creator field for easy lookup
Part of https://github.com/matrix-org/synapse/pull/10566
- Fill in creator whenever we insert into the rooms table
- Add background update to backfill any missing creator values
* Add changelog
* Fix usage
* Remove extra delta already included in #10697
* Don't worry about setting creator for invite
* Only iterate over rows missing the creator
See https://github.com/matrix-org/synapse/pull/10697#discussion_r695940898
* Use constant to fetch room creator field
See https://github.com/matrix-org/synapse/pull/10697#discussion_r696803029
* More protection from other random types
See https://github.com/matrix-org/synapse/pull/10697#discussion_r696806853
* Move new background update to end of list
See https://github.com/matrix-org/synapse/pull/10697#discussion_r696814181
* Fix query casing
* Fix ambiguity iterating over cursor instead of list
Fix `psycopg2.ProgrammingError: no results to fetch` error
when tests run with Postgres.
```
SYNAPSE_POSTGRES=1 SYNAPSE_TEST_LOG_LEVEL=INFO python -m twisted.trial tests.storage.databases.main.test_room
```
---
We use `txn.fetchall` because it will return the results as a
list or an empty list when there are no results.
Docs:
> `cursor` objects are iterable, so, instead of calling explicitly fetchone() in a loop, the object itself can be used:
>
> https://www.psycopg.org/docs/cursor.html#cursor-iterable
And I'm guessing iterating over a raw cursor does something weird when there are no results.
---
Test CI failure: https://github.com/matrix-org/synapse/pull/10697/checks?check_run_id=3468916530
```
tests.test_visibility.FilterEventsForServerTestCase.test_large_room
===============================================================================
[FAIL]
Traceback (most recent call last):
File "/home/runner/work/synapse/synapse/tests/storage/databases/main/test_room.py", line 85, in test_background_populate_rooms_creator_column
self.get_success(
File "/home/runner/work/synapse/synapse/tests/unittest.py", line 500, in get_success
return self.successResultOf(d)
File "/home/runner/work/synapse/synapse/.tox/py/lib/python3.9/site-packages/twisted/trial/_synctest.py", line 700, in successResultOf
self.fail(
twisted.trial.unittest.FailTest: Success result expected on <Deferred at 0x7f4022f3eb50 current result: None>, found failure result instead:
Traceback (most recent call last):
File "/home/runner/work/synapse/synapse/.tox/py/lib/python3.9/site-packages/twisted/internet/defer.py", line 701, in errback
self._startRunCallbacks(fail)
File "/home/runner/work/synapse/synapse/.tox/py/lib/python3.9/site-packages/twisted/internet/defer.py", line 764, in _startRunCallbacks
self._runCallbacks()
File "/home/runner/work/synapse/synapse/.tox/py/lib/python3.9/site-packages/twisted/internet/defer.py", line 858, in _runCallbacks
current.result = callback( # type: ignore[misc]
File "/home/runner/work/synapse/synapse/.tox/py/lib/python3.9/site-packages/twisted/internet/defer.py", line 1751, in gotResult
current_context.run(_inlineCallbacks, r, gen, status)
--- <exception caught here> ---
File "/home/runner/work/synapse/synapse/.tox/py/lib/python3.9/site-packages/twisted/internet/defer.py", line 1657, in _inlineCallbacks
result = current_context.run(
File "/home/runner/work/synapse/synapse/.tox/py/lib/python3.9/site-packages/twisted/python/failure.py", line 500, in throwExceptionIntoGenerator
return g.throw(self.type, self.value, self.tb)
File "/home/runner/work/synapse/synapse/synapse/storage/background_updates.py", line 224, in do_next_background_update
await self._do_background_update(desired_duration_ms)
File "/home/runner/work/synapse/synapse/synapse/storage/background_updates.py", line 261, in _do_background_update
items_updated = await update_handler(progress, batch_size)
File "/home/runner/work/synapse/synapse/synapse/storage/databases/main/room.py", line 1399, in _background_populate_rooms_creator_column
end = await self.db_pool.runInteraction(
File "/home/runner/work/synapse/synapse/synapse/storage/database.py", line 686, in runInteraction
result = await self.runWithConnection(
File "/home/runner/work/synapse/synapse/synapse/storage/database.py", line 791, in runWithConnection
return await make_deferred_yieldable(
File "/home/runner/work/synapse/synapse/.tox/py/lib/python3.9/site-packages/twisted/internet/defer.py", line 858, in _runCallbacks
current.result = callback( # type: ignore[misc]
File "/home/runner/work/synapse/synapse/tests/server.py", line 425, in <lambda>
d.addCallback(lambda x: function(*args, **kwargs))
File "/home/runner/work/synapse/synapse/.tox/py/lib/python3.9/site-packages/twisted/enterprise/adbapi.py", line 293, in _runWithConnection
compat.reraise(excValue, excTraceback)
File "/home/runner/work/synapse/synapse/.tox/py/lib/python3.9/site-packages/twisted/python/deprecate.py", line 298, in deprecatedFunction
return function(*args, **kwargs)
File "/home/runner/work/synapse/synapse/.tox/py/lib/python3.9/site-packages/twisted/python/compat.py", line 404, in reraise
raise exception.with_traceback(traceback)
File "/home/runner/work/synapse/synapse/.tox/py/lib/python3.9/site-packages/twisted/enterprise/adbapi.py", line 284, in _runWithConnection
result = func(conn, *args, **kw)
File "/home/runner/work/synapse/synapse/synapse/storage/database.py", line 786, in inner_func
return func(db_conn, *args, **kwargs)
File "/home/runner/work/synapse/synapse/synapse/storage/database.py", line 554, in new_transaction
r = func(cursor, *args, **kwargs)
File "/home/runner/work/synapse/synapse/synapse/storage/databases/main/room.py", line 1375, in _background_populate_rooms_creator_column_txn
for room_id, event_json in txn:
psycopg2.ProgrammingError: no results to fetch
```
* Move code not under the MSC2716 room version underneath an experimental config option
See https://github.com/matrix-org/synapse/pull/10566#issuecomment-906437909
* Add ordering to rooms creator background update
See https://github.com/matrix-org/synapse/pull/10697#discussion_r696815277
* Add comment to better document constant
See https://github.com/matrix-org/synapse/pull/10697#discussion_r699674458
* Use constant field
This updates the ordering of the returned events from the spaces
summary API to that defined in MSC2946 (which updates MSC1772).
Previously a step was skipped causing ordering to be inconsistent with
clients.
* Add some tests to characterise the problem
Some failing. Current states:
RoomsMemberListTestCase
test_get_member_list ...
[OK]
test_get_member_list_mixed_memberships ...
[OK]
test_get_member_list_no_permission ...
[OK]
test_get_member_list_no_permission_former_member ...
[OK]
test_get_member_list_no_permission_former_member_with_at_token ...
[FAIL]
test_get_member_list_no_room ...
[OK]
test_get_member_list_no_permission_with_at_token ...
[FAIL]
* Correct the tests
* Check user is/was member before divulging room membership
* Pull out only the 1 membership event we want.
* Update tests/rest/client/v1/test_rooms.py
Co-authored-by: Erik Johnston <erik@matrix.org>
* Fixup tests (following apply review suggestion)
Co-authored-by: Erik Johnston <erik@matrix.org>
Turns out that the functionality added in #10546 to skip TLS was incompatible
with older Twisted versions, so we need to be a bit more inventive.
Also, add a test to (hopefully) not break this in future. Sadly, testing TLS is
really hard.
Given that backfill and get_missing_events are basically the same thing, it's somewhat crazy that we have entirely separate code paths for them. This makes backfill use the existing get_missing_events code, and then clears up all the unused code.
When a user deletes an email from their account it will
now also remove all pushers for that email and that user
(even if these pushers were created by a different client)
Here we split on_receive_pdu into two functions (on_receive_pdu and process_pulled_event), rather than having both cases in the same method. There's a tiny bit of overlap, but not that much.
* drop room pdu linearizer sooner
No point holding onto it while we recheck the db
* move out `missing_prevs` calculation
we're going to need `missing_prevs` whatever we do, so we may as well calculate
it eagerly and just update it if it gets outdated.
* Add another `if missing_prevs` condition
this should be a no-op, since all the code inside the block already checks `if
missing_prevs`
* reorder if conditions
This shouldn't change the logic at all.
* Push down `min_depth` read
No point reading it from the database unless we're going to use it.
* Collect the sent_to_us_directly code together
Move the remaining `sent_to_us_directly` code inside the `if
sent_to_us_directly` block.
* Properly separate the `not sent_to_us_directly` branch
Since the only way this second block is now reachable is if we
*didn't* go into the `sent_to_us_directly` branch, we can replace it with a
simple `else`.
* changelog
Marking things as outliers to inhibit pushes is a sledgehammer to crack a
nut. Move the test further down the stack so that we just inhibit the thing we
want.
* Include outlier status in `str(event)`
In places where we log event objects, knowing whether or not you're dealing
with an outlier is super useful.
* Remove duplicated logging in get_missing_events
When we process events received from get_missing_events, we log them twice
(once in `_get_missing_events_for_pdu`, and once in `on_receive_pdu`). Reduce
the duplication by removing the logging in `on_receive_pdu`, and ensuring the
call sites do sensible logging.
* log in `on_receive_pdu` when we already have the event
* Log which prev_events we are missing
* changelog
As opposed to only allowing the summary of spaces which the user is
already in or has world-readable visibility.
This makes the logic consistent with whether a space/room is returned
as part of a space and whether a space summary can start at a space.
If a room which the requesting user was invited to was queried over
federation it will now properly appear in the spaces summary (instead
of being stripped out by the requesting server).
* drop old-room hack
pretty sure we don't need this any more.
* Remove incorrect comment about modifying `context`
It doesn't look like the supplied context is ever modified.
* Stop `_auth_and_persist_event` modifying its parameters
This is only called in three places. Two of them don't pass `auth_events`, and
the third doesn't use the dict after passing it in, so this should be non-functional.
* Stop `_check_event_auth` modifying its parameters
`_check_event_auth` is only called in three places. `on_send_membership_event`
doesn't pass an `auth_events`, and `prep` and `_auth_and_persist_event` do not
use the map after passing it in.
* Stop `_update_auth_events_and_context_for_auth` modifying its parameters
Return the updated auth event dict, rather than modifying the parameter.
This is only called from `_check_event_auth`.
* Improve documentation on `_auth_and_persist_event`
Rename `auth_events` parameter to better reflect what it contains.
* Improve documentation on `_NewEventInfo`
* Improve documentation on `_check_event_auth`
rename `auth_events` parameter to better describe what it contains
* changelog
This adds 'allowed_room_ids' (in addition to 'allowed_spaces', for backwards
compatibility) to the federation response of the spaces summary.
A future PR will remove the 'allowed_spaces' flag.
If there are no services providing a protocol, omit it completely
instead of returning an empty dictionary.
This fixes a long-standing spec compliance bug.
The room type is per MSC3288 to allow the identity-server to
change invitation wording based on whether the invitation is to
a room or a space.
The prefixed key will be replaced once MSC3288 is accepted
into the spec.
* Make historical messages available to federated servers
Part of MSC2716: https://github.com/matrix-org/matrix-doc/pull/2716
Follow-up to https://github.com/matrix-org/synapse/pull/9247
* Debug message not available on federation
* Add base starting insertion point when no chunk ID is provided
* Fix messages from multiple senders in historical chunk
Follow-up to https://github.com/matrix-org/synapse/pull/9247
Part of MSC2716: https://github.com/matrix-org/matrix-doc/pull/2716
---
Previously, Synapse would throw a 403,
`Cannot force another user to join.`,
because we were trying to use `?user_id` from a single virtual user
which did not match with messages from other users in the chunk.
* Remove debug lines
* Messing with selecting insertion event extremeties
* Move db schema change to new version
* Add more better comments
* Make a fake requester with just what we need
See https://github.com/matrix-org/synapse/pull/10276#discussion_r660999080
* Store insertion events in table
* Make base insertion event float off on its own
See https://github.com/matrix-org/synapse/pull/10250#issuecomment-875711889
Conflicts:
synapse/rest/client/v1/room.py
* Validate that the app service can actually control the given user
See https://github.com/matrix-org/synapse/pull/10276#issuecomment-876316455
Conflicts:
synapse/rest/client/v1/room.py
* Add some better comments on what we're trying to check for
* Continue debugging
* Share validation logic
* Add inserted historical messages to /backfill response
* Remove debug sql queries
* Some marker event implemntation trials
* Clean up PR
* Rename insertion_event_id to just event_id
* Add some better sql comments
* More accurate description
* Add changelog
* Make it clear what MSC the change is part of
* Add more detail on which insertion event came through
* Address review and improve sql queries
* Only use event_id as unique constraint
* Fix test case where insertion event is already in the normal DAG
* Remove debug changes
* Add support for MSC2716 marker events
* Process markers when we receive it over federation
* WIP: make hs2 backfill historical messages after marker event
* hs2 to better ask for insertion event extremity
But running into the `sqlite3.IntegrityError: NOT NULL constraint failed: event_to_state_groups.state_group`
error
* Add insertion_event_extremities table
* Switch to chunk events so we can auth via power_levels
Previously, we were using `content.chunk_id` to connect one
chunk to another. But these events can be from any `sender`
and we can't tell who should be able to send historical events.
We know we only want the application service to do it but these
events have the sender of a real historical message, not the
application service user ID as the sender. Other federated homeservers
also have no indicator which senders are an application service on
the originating homeserver.
So we want to auth all of the MSC2716 events via power_levels
and have them be sent by the application service with proper
PL levels in the room.
* Switch to chunk events for federation
* Add unstable room version to support new historical PL
* Messy: Fix undefined state_group for federated historical events
```
2021-07-13 02:27:57,810 - synapse.handlers.federation - 1248 - ERROR - GET-4 - Failed to backfill from hs1 because NOT NULL constraint failed: event_to_state_groups.state_group
Traceback (most recent call last):
File "/usr/local/lib/python3.8/site-packages/synapse/handlers/federation.py", line 1216, in try_backfill
await self.backfill(
File "/usr/local/lib/python3.8/site-packages/synapse/handlers/federation.py", line 1035, in backfill
await self._auth_and_persist_event(dest, event, context, backfilled=True)
File "/usr/local/lib/python3.8/site-packages/synapse/handlers/federation.py", line 2222, in _auth_and_persist_event
await self._run_push_actions_and_persist_event(event, context, backfilled)
File "/usr/local/lib/python3.8/site-packages/synapse/handlers/federation.py", line 2244, in _run_push_actions_and_persist_event
await self.persist_events_and_notify(
File "/usr/local/lib/python3.8/site-packages/synapse/handlers/federation.py", line 3290, in persist_events_and_notify
events, max_stream_token = await self.storage.persistence.persist_events(
File "/usr/local/lib/python3.8/site-packages/synapse/logging/opentracing.py", line 774, in _trace_inner
return await func(*args, **kwargs)
File "/usr/local/lib/python3.8/site-packages/synapse/storage/persist_events.py", line 320, in persist_events
ret_vals = await yieldable_gather_results(enqueue, partitioned.items())
File "/usr/local/lib/python3.8/site-packages/synapse/storage/persist_events.py", line 237, in handle_queue_loop
ret = await self._per_item_callback(
File "/usr/local/lib/python3.8/site-packages/synapse/storage/persist_events.py", line 577, in _persist_event_batch
await self.persist_events_store._persist_events_and_state_updates(
File "/usr/local/lib/python3.8/site-packages/synapse/storage/databases/main/events.py", line 176, in _persist_events_and_state_updates
await self.db_pool.runInteraction(
File "/usr/local/lib/python3.8/site-packages/synapse/storage/database.py", line 681, in runInteraction
result = await self.runWithConnection(
File "/usr/local/lib/python3.8/site-packages/synapse/storage/database.py", line 770, in runWithConnection
return await make_deferred_yieldable(
File "/usr/local/lib/python3.8/site-packages/twisted/python/threadpool.py", line 238, in inContext
result = inContext.theWork() # type: ignore[attr-defined]
File "/usr/local/lib/python3.8/site-packages/twisted/python/threadpool.py", line 254, in <lambda>
inContext.theWork = lambda: context.call( # type: ignore[attr-defined]
File "/usr/local/lib/python3.8/site-packages/twisted/python/context.py", line 118, in callWithContext
return self.currentContext().callWithContext(ctx, func, *args, **kw)
File "/usr/local/lib/python3.8/site-packages/twisted/python/context.py", line 83, in callWithContext
return func(*args, **kw)
File "/usr/local/lib/python3.8/site-packages/twisted/enterprise/adbapi.py", line 293, in _runWithConnection
compat.reraise(excValue, excTraceback)
File "/usr/local/lib/python3.8/site-packages/twisted/python/deprecate.py", line 298, in deprecatedFunction
return function(*args, **kwargs)
File "/usr/local/lib/python3.8/site-packages/twisted/python/compat.py", line 403, in reraise
raise exception.with_traceback(traceback)
File "/usr/local/lib/python3.8/site-packages/twisted/enterprise/adbapi.py", line 284, in _runWithConnection
result = func(conn, *args, **kw)
File "/usr/local/lib/python3.8/site-packages/synapse/storage/database.py", line 765, in inner_func
return func(db_conn, *args, **kwargs)
File "/usr/local/lib/python3.8/site-packages/synapse/storage/database.py", line 549, in new_transaction
r = func(cursor, *args, **kwargs)
File "/usr/local/lib/python3.8/site-packages/synapse/logging/utils.py", line 69, in wrapped
return f(*args, **kwargs)
File "/usr/local/lib/python3.8/site-packages/synapse/storage/databases/main/events.py", line 385, in _persist_events_txn
self._store_event_state_mappings_txn(txn, events_and_contexts)
File "/usr/local/lib/python3.8/site-packages/synapse/storage/databases/main/events.py", line 2065, in _store_event_state_mappings_txn
self.db_pool.simple_insert_many_txn(
File "/usr/local/lib/python3.8/site-packages/synapse/storage/database.py", line 923, in simple_insert_many_txn
txn.execute_batch(sql, vals)
File "/usr/local/lib/python3.8/site-packages/synapse/storage/database.py", line 280, in execute_batch
self.executemany(sql, args)
File "/usr/local/lib/python3.8/site-packages/synapse/storage/database.py", line 300, in executemany
self._do_execute(self.txn.executemany, sql, *args)
File "/usr/local/lib/python3.8/site-packages/synapse/storage/database.py", line 330, in _do_execute
return func(sql, *args)
sqlite3.IntegrityError: NOT NULL constraint failed: event_to_state_groups.state_group
```
* Revert "Messy: Fix undefined state_group for federated historical events"
This reverts commit 187ab28611546321e02770944c86f30ee2bc742a.
* Fix federated events being rejected for no state_groups
Add fix from https://github.com/matrix-org/synapse/pull/10439
until it merges.
* Adapting to experimental room version
* Some log cleanup
* Add better comments around extremity fetching code and why
* Rename to be more accurate to what the function returns
* Add changelog
* Ignore rejected events
* Use simplified upsert
* Add Erik's explanation of extra event checks
See https://github.com/matrix-org/synapse/pull/10498#discussion_r680880332
* Clarify that the depth is not directly correlated to the backwards extremity that we return
See https://github.com/matrix-org/synapse/pull/10498#discussion_r681725404
* lock only matters for sqlite
See https://github.com/matrix-org/synapse/pull/10498#discussion_r681728061
* Move new SQL changes to its own delta file
* Clean up upsert docstring
* Bump database schema version (62)
* Make historical messages available to federated servers
Part of MSC2716: https://github.com/matrix-org/matrix-doc/pull/2716
Follow-up to https://github.com/matrix-org/synapse/pull/9247
* Debug message not available on federation
* Add base starting insertion point when no chunk ID is provided
* Fix messages from multiple senders in historical chunk
Follow-up to https://github.com/matrix-org/synapse/pull/9247
Part of MSC2716: https://github.com/matrix-org/matrix-doc/pull/2716
---
Previously, Synapse would throw a 403,
`Cannot force another user to join.`,
because we were trying to use `?user_id` from a single virtual user
which did not match with messages from other users in the chunk.
* Remove debug lines
* Messing with selecting insertion event extremeties
* Move db schema change to new version
* Add more better comments
* Make a fake requester with just what we need
See https://github.com/matrix-org/synapse/pull/10276#discussion_r660999080
* Store insertion events in table
* Make base insertion event float off on its own
See https://github.com/matrix-org/synapse/pull/10250#issuecomment-875711889
Conflicts:
synapse/rest/client/v1/room.py
* Validate that the app service can actually control the given user
See https://github.com/matrix-org/synapse/pull/10276#issuecomment-876316455
Conflicts:
synapse/rest/client/v1/room.py
* Add some better comments on what we're trying to check for
* Continue debugging
* Share validation logic
* Add inserted historical messages to /backfill response
* Remove debug sql queries
* Some marker event implemntation trials
* Clean up PR
* Rename insertion_event_id to just event_id
* Add some better sql comments
* More accurate description
* Add changelog
* Make it clear what MSC the change is part of
* Add more detail on which insertion event came through
* Address review and improve sql queries
* Only use event_id as unique constraint
* Fix test case where insertion event is already in the normal DAG
* Remove debug changes
* Switch to chunk events so we can auth via power_levels
Previously, we were using `content.chunk_id` to connect one
chunk to another. But these events can be from any `sender`
and we can't tell who should be able to send historical events.
We know we only want the application service to do it but these
events have the sender of a real historical message, not the
application service user ID as the sender. Other federated homeservers
also have no indicator which senders are an application service on
the originating homeserver.
So we want to auth all of the MSC2716 events via power_levels
and have them be sent by the application service with proper
PL levels in the room.
* Switch to chunk events for federation
* Add unstable room version to support new historical PL
* Fix federated events being rejected for no state_groups
Add fix from https://github.com/matrix-org/synapse/pull/10439
until it merges.
* Only connect base insertion event to prev_event_ids
Per discussion with @erikjohnston,
https://matrix.to/#/!UytJQHLQYfvYWsGrGY:jki.re/$12bTUiObDFdHLAYtT7E-BvYRp3k_xv8w0dUQHibasJk?via=jki.re&via=matrix.org
* Make it possible to get the room_version with txn
* Allow but ignore historical events in unsupported room version
See https://github.com/matrix-org/synapse/pull/10245#discussion_r675592489
We can't reject historical events on unsupported room versions because homeservers without knowledge of MSC2716 or the new room version don't reject historical events either.
Since we can't rely on the auth check here to stop historical events on unsupported room versions, I've added some additional checks in the processing/persisting code (`synapse/storage/databases/main/events.py` -> `_handle_insertion_event` and `_handle_chunk_event`). I've had to do some refactoring so there is method to fetch the room version by `txn`.
* Move to unique index syntax
See https://github.com/matrix-org/synapse/pull/10245#discussion_r675638509
* High-level document how the insertion->chunk lookup works
* Remove create_event fallback for room_versions
See https://github.com/matrix-org/synapse/pull/10245/files#r677641879
* Use updated method name
==============================
Bugfixes
--------
- Fix a bug introduced in Synapse 1.38 which caused an exception at startup when SAML authentication was enabled. ([\#10477](https://github.com/matrix-org/synapse/issues/10477))
- Fix a long-standing bug where Synapse would not inform clients that a device had exhausted its one-time-key pool, potentially causing problems decrypting events. ([\#10485](https://github.com/matrix-org/synapse/issues/10485))
- Fix reporting old R30 stats as R30v2 stats. Introduced in v1.39.0rc1. ([\#10486](https://github.com/matrix-org/synapse/issues/10486))
Internal Changes
----------------
- Fix an error which prevented the Github Actions workflow to build the docker images from running. ([\#10461](https://github.com/matrix-org/synapse/issues/10461))
- Fix release script to correctly version debian changelog when doing RCs. ([\#10465](https://github.com/matrix-org/synapse/issues/10465))
-----BEGIN PGP SIGNATURE-----
iQFEBAABCgAuFiEEBTGR3/RnAzBGUif3pULk7RsPrAkFAmEBUJUQHGVyaWtAbWF0
cml4Lm9yZwAKCRClQuTtGw+sCWi6CACfA3B7rXfQIO893mctSZkNhtAG/e4o310M
etvjAtovKmKeFqBvm89FPmFoXvGA2ypoz7Jz2fdkP56DNKIXvihnDc8EeQ3gGawf
hQ8GBjICOL1e7R/4qzuOCWYdppBGoGNAbz7qyxAUxZ/XOzsPJ2VBGkgyXWZkyPe/
nJYsuMuMp117HUwTqPqs3oZuTN0MRTy6xgaDfbFbcX9UC/amLmGIWOhlme8iV15r
HQAW0X7F2Un5h7eQwogWTDb9gBHKnJ4ApaSJLfZl9E72i0Sv7o9UFcLIdy2DRVSq
gxlRBVzVU6ZndCQ4vQXFSjQ20VGNXc2vpKVRE1D6YXxmxVNbBQB4
=lb6H
-----END PGP SIGNATURE-----
Merge tag 'v1.39.0rc3' into develop
Synapse 1.39.0rc3 (2021-07-28)
==============================
Bugfixes
--------
- Fix a bug introduced in Synapse 1.38 which caused an exception at startup when SAML authentication was enabled. ([\#10477](https://github.com/matrix-org/synapse/issues/10477))
- Fix a long-standing bug where Synapse would not inform clients that a device had exhausted its one-time-key pool, potentially causing problems decrypting events. ([\#10485](https://github.com/matrix-org/synapse/issues/10485))
- Fix reporting old R30 stats as R30v2 stats. Introduced in v1.39.0rc1. ([\#10486](https://github.com/matrix-org/synapse/issues/10486))
Internal Changes
----------------
- Fix an error which prevented the Github Actions workflow to build the docker images from running. ([\#10461](https://github.com/matrix-org/synapse/issues/10461))
- Fix release script to correctly version debian changelog when doing RCs. ([\#10465](https://github.com/matrix-org/synapse/issues/10465))
This adds an API for third-party plugin modules to implement account validity, so they can provide this feature instead of Synapse. The module implementing the current behaviour for this feature can be found at https://github.com/matrix-org/synapse-email-account-validity.
To allow for a smooth transition between the current feature and the new module, hooks have been added to the existing account validity endpoints to allow their behaviours to be overridden by a module.
Previously only world-readable rooms were shown. This means that
rooms which are public, knockable, or invite-only with a pending invitation,
are included in a space summary. It also applies the same logic to
the experimental room version from MSC3083 -- if a user has access
to the proper allowed rooms then it is shown in the spaces summary.
This change is made per MSC3173 allowing stripped state of a room to
be shown to any potential room joiner.
* Add base starting insertion point when no chunk ID is provided
This is so we can have the marker event point to this initial
insertion event and be able to traverse the events in the first chunk.
Because modules might send extra state events when processing an event (e.g. matrix-org/synapse-dinsic#100), and in some cases these extra events might get dropped if we don't recalculate the initial event's auth.
The idea here is to stop people sending things that aren't joins/leaves/knocks through these endpoints: previously you could send anything you liked through them. I wasn't able to find any security holes from doing so, but it doesn't sound like a good thing.
This implements refresh tokens, as defined by MSC2918
This MSC has been implemented client side in Hydrogen Web: vector-im/hydrogen-web#235
The basics of the MSC works: requesting refresh tokens on login, having the access tokens expire, and using the refresh token to get a new one.
Signed-off-by: Quentin Gliech <quentingliech@gmail.com>
If a room is remote and we don't have a user in it, always try to join it. It might fail if the room is invite-only, but we don't have a user to invite with, so at this point it's the best we can do.
Fixes#10233 (at least to some extent)
Implemented config option sso.update_profile_information to keep user's display name in sync with the SSO displayname.
Signed-off-by: Johannes Kanefendt <johannes.kanefendt@krzn.de>
An accidental mis-ordering of operations during #6739 technically allowed an incoming knock event over federation in before checking it against any configured Third Party Access Rules modules.
This PR corrects that by performing the TPAR check *before* persisting the event.
This could cause a minor data leak if someone defined a non-restricted join rule
with an allow key or used a restricted join rule in an older room version, but this is
unlikely.
Additionally this starts adding unit tests to the spaces summary handler.
This PR adds a common configuration section for all modules (see docs). These modules are then loaded at startup by the homeserver. Modules register their hooks and web resources using the new `register_[...]_callbacks` and `register_web_resource` methods of the module API.
Dangerous actions means deactivating an account, modifying an account
password, or adding a 3PID.
Other actions (deleting devices, uploading keys) can re-use the same UI
auth session if ui_auth.session_timeout is configured.
* Room version 7 for knocking.
* Stable prefixes and endpoints (both client and federation) for knocking.
* Removes the experimental configuration flag.
Spawned from missing messages we were seeing on `matrix.org` from a
federated Gtiter bridged room, https://gitlab.com/gitterHQ/webapp/-/issues/2770.
The underlying issue in Synapse is tracked by https://github.com/matrix-org/synapse/issues/10066
where the message and join event race and the message is `soft_failed` before the
`join` event reaches the remote federated server.
Less soft_failed events = better and usually this should only trigger for events
where people are doing bad things and trying to fuzz and fake everything.
Fixes#1834.
`get_new_events_for_appservice` internally calls `get_events_as_list`, which will filter out any rejected events. If all returned events are filtered out, `_notify_interested_services` will return without updating the last handled stream position. If there are 100 consecutive such events, processing will halt altogether.
Breaking the loop is now done by checking whether we're up-to-date with `current_max` in the loop condition, instead of relying on an empty `events` list.
Signed-off-by: Willem Mulder <14mRh4X0r@gmail.com>
If backfilling is slow then the client may time out and retry, causing
Synapse to start a new `/backfill` before the existing backfill has
finished, duplicating work.
Empirically, this helped my server considerably when handling gaps in Matrix HQ. The problem was that we would repeatedly call have_seen_events for the same set of (50K or so) auth_events, each of which would take many minutes to complete, even though it's only an index scan.
To be more consistent with similar code. The check now automatically
raises an AuthError instead of passing back a boolean. It also absorbs
some shared logic between callers.
This should help ensure that equivalent results are achieved between
homeservers querying for the summary of a space.
This implements modified MSC1772 rules, according to MSC2946.
The different is that the origin_server_ts of the m.room.create event
is not used as a tie-breaker since this might not be known if the
homeserver is not part of the room.
We were pulling the full auth chain for the room out of the DB each time
we backfilled, which can be *huge* for large rooms and is totally
unnecessary.
This is an update based on changes to MSC2946. The origin_server_ts
of the m.room.create event is copied into the creation_ts field for each
room returned from the spaces summary.
Applied a (slightly modified) patch from https://github.com/matrix-org/synapse/issues/9574.
As far as I understand this would allow the cookie set during the OIDC flow to work on deployments using public baseurls that do not sit at the URL path root.
When receiving a /send_join request for a room with join rules set to 'restricted',
check if the user is a member of the spaces defined in the 'allow' key of the join rules.
This only applies to an experimental room version, as defined in MSC3083.
This attempts to be a direct port of https://github.com/matrix-org/synapse-dinsic/pull/74 to mainline. There was some fiddling required to deal with the changes that have been made to mainline since (mainly dealing with the split of `RegistrationWorkerStore` from `RegistrationStore`, and the changes made to `self.make_request` in test code).
When receiving a /send_join request for a room with join rules set to 'restricted',
check if the user is a member of the spaces defined in the 'allow' key of the join
rules.
This only applies to an experimental room version, as defined in MSC3083.
Part of #9744
Removes all redundant `# -*- coding: utf-8 -*-` lines from files, as python 3 automatically reads source code as utf-8 now.
`Signed-off-by: Jonathan de Jong <jonathan@automatia.nl>`
When joining a room with join rules set to 'restricted', check if the
user is a member of the spaces defined in the 'allow' key of the join rules.
This only applies to an experimental room version, as defined in MSC3083.
At the moment, if you'd like to share presence between local or remote users, those users must be sharing a room together. This isn't always the most convenient or useful situation though.
This PR adds a module to Synapse that will allow deployments to set up extra logic on where presence updates should be routed. The module must implement two methods, `get_users_for_states` and `get_interested_users`. These methods are given presence updates or user IDs and must return information that Synapse will use to grant passing presence updates around.
A method is additionally added to `ModuleApi` which allows triggering a set of users to receive the current, online presence information for all users they are considered interested in. This is the equivalent of that user receiving presence information during an initial sync.
The goal of this module is to be fairly generic and useful for a variety of applications, with hard requirements being:
* Sending state for a specific set or all known users to a defined set of local and remote users.
* The ability to trigger an initial sync for specific users, so they receive all current state.
`room_invite_state_types` was inconvenient as a configuration setting, because
anyone that ever set it would not receive any new types that were added to the
defaults. Here, we deprecate the old setting, and replace it with a couple of
new settings under `room_prejoin_state`.
This should fix a class of bug where we forget to check if e.g. the appservice shouldn't be ratelimited.
We also check the `ratelimit_override` table to check if the user has ratelimiting disabled. That table is really only meant to override the event sender ratelimiting, so we don't use any values from it (as they might not make sense for different rate limits), but we do infer that if ratelimiting is disabled for the user we should disabled all ratelimits.
Fixes#9663
Running `dmypy run` will do a `mypy` check while spinning up a daemon
that makes rerunning `dmypy run` a lot faster.
`dmypy` doesn't support `follow_imports = silent` and has
`local_partial_types` enabled, so this PR enables those options and
fixes the issues that were newly raised. Note that `local_partial_types`
will be enabled by default in upcoming mypy releases.
Builds on the work done in #9643 to add a federation API for space summaries.
There's a bit of refactoring of the existing client-server code first, to avoid too much duplication.
We had two functions named `get_forward_extremities_for_room` and
`get_forward_extremeties_for_room` that took different paramters. We
rename one of them to avoid confusion.
Instead of if the user does not have a password hash. This allows a SSO
user to add a password to their account, but only if the local password
database is configured.
Fixes https://github.com/matrix-org/synapse/issues/9572
When a SSO user logs in for the first time, we create a local Matrix user for them. This goes through the register_user flow, which ends up triggering the spam checker. Spam checker modules don't currently have any way to differentiate between a user trying to sign up initially, versus an SSO user (whom has presumably already been approved elsewhere) trying to log in for the first time.
This PR passes `auth_provider_id` as an argument to the `check_registration_for_spam` function. This argument will contain an ID of an SSO provider (`"saml"`, `"cas"`, etc.) if one was used, else `None`.
