The Electrum block-header subscription did not provide us with block headers, because upon the connection being closed by a node the subscription would end.
Re-newing the the subscription upon re-connect is not easily achievable, that's why we opted for a polling mode for now, where we start a block header subscription on every update iteration, that is only used once (when the subscription is made).
There is no `--mainnet` flag.
Since we cannot just pass an empty string to `.arg()` we use the `.args()` method to pass nothing for mainnet and the respective flags for stagenet and testnet.
By default the finality confirmations of the network's `env::Config` will be applied and no finality confirmations will be persisted on disk in the config file.
It is however possible to set finality confirmations in the config file for bitcoin and monero for power users at their own risk.
If set the defaults will be overwritten with the parameter from the config file upon startup.
To run the ASB on testnet, one actively has to provide the `--testnet` flag.
Mainnet and testnet data and config are separated into sub-folders, i.e. `{data/config-dir}/asb/testnet` and `{data-dir}/asb/mainnet`.
The initial setup is also per network. If (default) config for the network cannot be found the initial setup is triggered.
Startup includes network check to ensure the bitcoin/monero network in config file is the same as the one in the `env::Config`.
Note: Wallet initialization is done with the network set in the `env::Config`, the network saved in the config file is just to indicate what network the config file is for.
This includes testing CLI commandline args
Clap's `default_value_with` actually did not work on `Subcommand`s because the parent's flags were not picked up.
This was fixed by changing parameters dependent on testnet/mainnet to options.
This problem should have been detected by tests, that's why the command line parameter tests were finally (re-)added.
Thanks to @rishflab for some pre-work for this.
In order to allow people to plug into public nodes / be more flexible with their own setup we now enforce specifying the monero daemon port to be used by the `monero-wallet-rpc`.
In the past we had problems with flags/parameter changes several times, where on instance was changed, buy another one was missed. This should mitigate this problem.
This patch introduces structs for all duplicated parameters and uses flatten to only have one point for changes.
Additionally removes all mentions of `alice` from the commands / variables. This code is on an application level and should not be concerned with swap protocol roles.
493: Add checks to max_giveable amount. r=da-kami a=bonomat
We need to check two things:
- balance to be higher than dust amount (546).
- balance to be higher than min-relay fee.
Additionally, the tx_builder might fail if not enough funds are in the wallet to pay for the overall transaction fees. In both cases, we return 0.
fixes#487
Co-authored-by: Philipp Hoenisch <philipp@hoenisch.at>
We need to check two things:
- balance to be higher than dust amount (546).
- balance to be higher than min-relay fee.
Additionally, the tx_builder might fail if not enough funds are in the wallet to pay for the overall transaction fees.
476: Bump dprint/check from v1.3 to v1.4 r=thomaseizinger a=dependabot[bot]
Bumps [dprint/check](https://github.com/dprint/check) from v1.3 to v1.4.
<details>
<summary>Release notes</summary>
<p><em>Sourced from <a href="https://github.com/dprint/check/releases">dprint/check's releases</a>.</em></p>
<blockquote>
<h2>v1.4</h2>
<p>Upgrade to dprint 0.13.1</p>
</blockquote>
</details>
<details>
<summary>Commits</summary>
<ul>
<li><a href="a3ed4347fe"><code>a3ed434</code></a> fix: Update to dprint 0.13.1</li>
<li>See full diff in <a href="https://github.com/dprint/check/compare/v1.3...a3ed4347fef5b3b2bf68cc38b44885d9df913253">compare view</a></li>
</ul>
</details>
<br />
Dependabot will resolve any conflicts with this PR as long as you don't alter it yourself. You can also trigger a rebase manually by commenting `@dependabot rebase`.
[//]: # (dependabot-automerge-start)
[//]: # (dependabot-automerge-end)
---
<details>
<summary>Dependabot commands and options</summary>
<br />
You can trigger Dependabot actions by commenting on this PR:
- `@dependabot rebase` will rebase this PR
- `@dependabot recreate` will recreate this PR, overwriting any edits that have been made to it
- `@dependabot merge` will merge this PR after your CI passes on it
- `@dependabot squash and merge` will squash and merge this PR after your CI passes on it
- `@dependabot cancel merge` will cancel a previously requested merge and block automerging
- `@dependabot reopen` will reopen this PR if it is closed
- `@dependabot close` will close this PR and stop Dependabot recreating it. You can achieve the same result by closing it manually
- `@dependabot ignore this major version` will close this PR and stop Dependabot creating any more for this major version (unless you reopen the PR or upgrade to it yourself)
- `@dependabot ignore this minor version` will close this PR and stop Dependabot creating any more for this minor version (unless you reopen the PR or upgrade to it yourself)
- `@dependabot ignore this dependency` will close this PR and stop Dependabot creating any more for this dependency (unless you reopen the PR or upgrade to it yourself)
</details>
477: Bump sha2 from 0.9.3 to 0.9.4 r=thomaseizinger a=dependabot[bot]
Bumps [sha2](https://github.com/RustCrypto/hashes) from 0.9.3 to 0.9.4.
<details>
<summary>Commits</summary>
<ul>
<li><a href="c1ed4b1cbc"><code>c1ed4b1</code></a> sha2 v0.9.4 (<a href="https://github-redirect.dependabot.com/RustCrypto/hashes/issues/265">#265</a>)</li>
<li><a href="1bf768865d"><code>1bf7688</code></a> sha-1 v0.9.5 (<a href="https://github-redirect.dependabot.com/RustCrypto/hashes/issues/264">#264</a>)</li>
<li><a href="bf761edb53"><code>bf761ed</code></a> sha1+sha2: switch from <code>cpuid-bool</code> to <code>cpufeatures</code> (<a href="https://github-redirect.dependabot.com/RustCrypto/hashes/issues/263">#263</a>)</li>
<li><a href="1e775edda2"><code>1e775ed</code></a> sha2: bump <code>sha2-asm</code> to v0.6.1 release (<a href="https://github-redirect.dependabot.com/RustCrypto/hashes/issues/262">#262</a>)</li>
<li><a href="e8b3abe442"><code>e8b3abe</code></a> feat(sha2): use latest sha2-asm and enable M1 (<a href="https://github-redirect.dependabot.com/RustCrypto/hashes/issues/261">#261</a>)</li>
<li><a href="ee361ed25f"><code>ee361ed</code></a> build(deps): bump libc from 0.2.88 to 0.2.93 (<a href="https://github-redirect.dependabot.com/RustCrypto/hashes/issues/254">#254</a>)</li>
<li><a href="0bf77b52b1"><code>0bf77b5</code></a> build(deps): bump byteorder from 1.4.2 to 1.4.3 (<a href="https://github-redirect.dependabot.com/RustCrypto/hashes/issues/245">#245</a>)</li>
<li><a href="dd9086ad8c"><code>dd9086a</code></a> sha1: add multiplatform tests (<a href="https://github-redirect.dependabot.com/RustCrypto/hashes/issues/252">#252</a>)</li>
<li><a href="1c1182c8b8"><code>1c1182c</code></a> rustfmt (<a href="https://github-redirect.dependabot.com/RustCrypto/hashes/issues/253">#253</a>)</li>
<li><a href="ad19dffcbe"><code>ad19dff</code></a> build(deps): bump libc from 0.2.86 to 0.2.88 (<a href="https://github-redirect.dependabot.com/RustCrypto/hashes/issues/244">#244</a>)</li>
<li>Additional commits viewable in <a href="https://github.com/RustCrypto/hashes/compare/sha2-v0.9.3...sha2-v0.9.4">compare view</a></li>
</ul>
</details>
<br />
[](https://docs.github.com/en/github/managing-security-vulnerabilities/about-dependabot-security-updates#about-compatibility-scores)
Dependabot will resolve any conflicts with this PR as long as you don't alter it yourself. You can also trigger a rebase manually by commenting `@dependabot rebase`.
[//]: # (dependabot-automerge-start)
[//]: # (dependabot-automerge-end)
---
<details>
<summary>Dependabot commands and options</summary>
<br />
You can trigger Dependabot actions by commenting on this PR:
- `@dependabot rebase` will rebase this PR
- `@dependabot recreate` will recreate this PR, overwriting any edits that have been made to it
- `@dependabot merge` will merge this PR after your CI passes on it
- `@dependabot squash and merge` will squash and merge this PR after your CI passes on it
- `@dependabot cancel merge` will cancel a previously requested merge and block automerging
- `@dependabot reopen` will reopen this PR if it is closed
- `@dependabot close` will close this PR and stop Dependabot recreating it. You can achieve the same result by closing it manually
- `@dependabot ignore this major version` will close this PR and stop Dependabot creating any more for this major version (unless you reopen the PR or upgrade to it yourself)
- `@dependabot ignore this minor version` will close this PR and stop Dependabot creating any more for this minor version (unless you reopen the PR or upgrade to it yourself)
- `@dependabot ignore this dependency` will close this PR and stop Dependabot creating any more for this dependency (unless you reopen the PR or upgrade to it yourself)
</details>
Co-authored-by: dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com>
483: Bump url from 2.2.1 to 2.2.2 r=thomaseizinger a=dependabot[bot]
Bumps [url](https://github.com/servo/rust-url) from 2.2.1 to 2.2.2.
<details>
<summary>Commits</summary>
<ul>
<li><a href="6c22912c31"><code>6c22912</code></a> Merge pull request <a href="https://github-redirect.dependabot.com/servo/rust-url/issues/709">#709</a> from BramBonne/bump-version</li>
<li><a href="0707a58b91"><code>0707a58</code></a> Bump minor version number</li>
<li><a href="991e438ff1"><code>991e438</code></a> Merge pull request <a href="https://github-redirect.dependabot.com/servo/rust-url/issues/708">#708</a> from BramBonne/test-syntax-violations</li>
<li><a href="744b76332c"><code>744b763</code></a> Remove stray comma</li>
<li><a href="5793b7ef14"><code>5793b7e</code></a> Check parsing result in SyntaxViolation test</li>
<li><a href="0659871a26"><code>0659871</code></a> Add tests for SyntaxViolation callback types</li>
<li><a href="c6f60fe5ff"><code>c6f60fe</code></a> Merge pull request <a href="https://github-redirect.dependabot.com/servo/rust-url/issues/668">#668</a> from sdroege/make-relative</li>
<li><a href="d51cec4803"><code>d51cec4</code></a> Add Url::make_relative() as the inverse of Url::join()</li>
<li><a href="77fb472619"><code>77fb472</code></a> Merge pull request <a href="https://github-redirect.dependabot.com/servo/rust-url/issues/703">#703</a> from BramBonne/slicing-tests</li>
<li><a href="ea2342e182"><code>ea2342e</code></a> Merge pull request <a href="https://github-redirect.dependabot.com/servo/rust-url/issues/705">#705</a> from BramBonne/test-quirks</li>
<li>Additional commits viewable in <a href="https://github.com/servo/rust-url/compare/v2.2.1...v2.2.2">compare view</a></li>
</ul>
</details>
<br />
[](https://docs.github.com/en/github/managing-security-vulnerabilities/about-dependabot-security-updates#about-compatibility-scores)
Dependabot will resolve any conflicts with this PR as long as you don't alter it yourself. You can also trigger a rebase manually by commenting `@dependabot rebase`.
[//]: # (dependabot-automerge-start)
[//]: # (dependabot-automerge-end)
---
<details>
<summary>Dependabot commands and options</summary>
<br />
You can trigger Dependabot actions by commenting on this PR:
- `@dependabot rebase` will rebase this PR
- `@dependabot recreate` will recreate this PR, overwriting any edits that have been made to it
- `@dependabot merge` will merge this PR after your CI passes on it
- `@dependabot squash and merge` will squash and merge this PR after your CI passes on it
- `@dependabot cancel merge` will cancel a previously requested merge and block automerging
- `@dependabot reopen` will reopen this PR if it is closed
- `@dependabot close` will close this PR and stop Dependabot recreating it. You can achieve the same result by closing it manually
- `@dependabot ignore this major version` will close this PR and stop Dependabot creating any more for this major version (unless you reopen the PR or upgrade to it yourself)
- `@dependabot ignore this minor version` will close this PR and stop Dependabot creating any more for this minor version (unless you reopen the PR or upgrade to it yourself)
- `@dependabot ignore this dependency` will close this PR and stop Dependabot creating any more for this dependency (unless you reopen the PR or upgrade to it yourself)
</details>
Co-authored-by: dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com>
474: Add more log details r=bonomat a=bonomat
Resolves#448
1. The first commit adds an additional log statement of the exchange rate for each state-update. This is useful because it allows us to measure profitability easily, i.e. by knowing what was the exchange rate when the swap was started and what was it when it was finalized.
2. The second commit changes a bunch of log messages.
3. The third commit is adds a new commandline flag to toggle json format.
Co-authored-by: Philipp Hoenisch <philipp@hoenisch.at>
Co-authored-by: Philipp Hoenisch <philipp@coblox.tech>
485: Update assert_weight test to account for a range up to 8 bytes. r=bonomat a=bonomat
Fixes#482
Weights fluctuate because of the length of the signatures. Valid ecdsa signatures can have 68, 69, 70, 71, or 72 bytes. Since most of our transactions have 2 signatures the weight can be up to 8 bytes less than the static weight (4 bytes per signature).
Since it is really hard to get these short signatures (<1 in 100), I also include the transaction in the assert message which will help for debugging purposes.
Source: https://medium.com/coinmonks/on-bitcoin-transaction-sizes-97e31bc9d816
Co-authored-by: Philipp Hoenisch <philipp@hoenisch.at>
Introduces a minimum buy Bitcoin amount similar to the maximum amount already present.
For the CLI the minimum amount is enforced by waiting until at least the minimum is available as max-giveable amount.
Max-buy and spread is not something that one would configure on every run.
More convenient to keep this in the config.
The max-buy Bitcoin value was adapted to `0.02` which is more reasonable for mainnet.
Activated feature `serde-float` to serialize the spread (Decimal) as float instead of string.
```
...
[maker]
max_buy_btc = 0.02
ask_spread = 0.02
```
Weights fluctuate because of the length of the signatures. Valid ecdsa signatures can have 68, 69, 70, 71, or 72 bytes. Since most of our transactions have 2 signatures the weight can be up to 8 bytes less than the static weight (4 bytes per signature).
452: Asb manual recovery commands r=da-kami a=da-kami
Fixes#377
Allows us to manually finish swaps if we run into error scenarios during execution.
I opted for putting all these commands under subcommand `manual-recovery` to run them e.g. (cancel):
```
./asb manual-recovery cancel [--force] --swap-id (...)
```
I combined the `cancel` and `refund` command in the same commit, because I only adapted the e2e tests once cancel and refund were implemented (cancel alone is a bit useless anyway...).
Co-authored-by: Daniel Karzel <daniel@comit.network>
Adds `cancel`, `refund`, `punish`, `redeem` and `safely-abort` commands to the ASB that can be used to trigger the specific scenario for the swap by ID.
`asb --help` :
(...)
SUBCOMMANDS:
balance Prints the Bitcoin and Monero balance. Requires the monero-wallet-rpc to be running.
help Prints this message or the help of the given subcommand(s)
history Prints swap-id and the state of each swap ever made.
start Main command to run the ASB.
withdraw-btc Allows withdrawing BTC from the internal Bitcoin wallet.
In the production code it is a weird indirection that we load the state and then pass in the state and the database.
In the tests we have one additional load by doing it inside the command, but loading from the db is not expensive.
461: Add resume-only mode for the ASB r=da-kami a=da-kami
Fixes#378
Resume-only is a maintenance mode where no swaps are accepted but unfinished swaps are resumed.
This is achieve by ignoring incoming spot-price requests (that would lead to execution setup) in the event-loop.
- [x] Refactor `spot_price`, move Alice's decision logic into dedicated `NetworkBehaviour`
- [x] Protocol (network) level tests for the `spot_price` behaviour
Co-authored-by: Daniel Karzel <daniel@comit.network>
Each test spawns swarm for Alice and Bob that only contains the spot_price behaviours and uses a memory transport.
Tests cover happy path (i.e. expected price is returned) and error scenarios.
Implementation of `TestRate` on `LatestRate` allows testing rate fetch error and quote calculation error behaviour.
Thanks to @thomaseizinger for ramping up the test framework for comit-rs in the past!
Instead of handling all errors on the inside spot_price errors are bubbled up (as `SwapRequestDeclined`).
This allows us to test both Alice's and Bob's behaviour for all scenarios.
What goes over the wire should not be coupled to the errors being printed.
For the CLI and ASB we introduce a separate error enum that is used for logging.
When sending over the wire the errors are mapped to and from the `network::spot_price::Error`.
As part of Bob-specific spot_price code was moved from the network into bob.
Clearly separation of the network API from bob/alice.
Move Alice's spot price logic into a dedicated network behaviour that handles all the logic.
The new behaviour encapsulates the complete state necessary for spot price request decision making.
The network behaviour cannot handle asynchronous calls, thus the balance is managed inside the spot price and has to updated regularly from the outside to ensure the spot price balance check has up to date data.
At the moment the balance is updated upon an incoming quote requests.
Code that is relevant for both ASB and CLI remains in the `network::spot_price` module (e.g. `network::spot_price::Error`).
