On Linux and macOS, no program output was being observed.
This is referenced in the [LocalTime] docs for `tracing-subscriber`,
which links to this [unsoundness issue] in the time crate.
Rather than introducing a possible vector for undefined behaviour and
segfaults, I have just changed the logging to use UTC time instead.
When running the ASB as a systemd service, one would generally use the
`--disable-timestamps` flag anyway as systemd adds its own timestamps
which can be local to the server.
If the situation with `tracing-subscriber` and the time crate is fixed
then this can be updated.
This commit also updates the `tracing-subscriber` and `tracing-appender`
dependencies, closing #987.
[LocalTime]: https://docs.rs/tracing-subscriber/latest/tracing_subscriber/fmt/time/struct.LocalTime.html
[unsoundness issue]: https://github.com/time-rs/time/issues/293#issuecomment-748151025
934: Don't wait for refund transaction to receive confirmations r=binarybaron a=binarybaron
Don't wait for refund transaction to receive confirmations to mitigate a scenario where the swap is stuck in `BtcCancelled` because it's not resumable.
Closes https://github.com/comit-network/xmr-btc-swap/issues/903
Co-authored-by: binarybaron <86064887+binarybaron@users.noreply.github.com>
894: Reduce `bitcoin_finality_confirmations` from 2 to 1 r=binarybaron a=binarybaron
Reduces `bitcoin_finality_confirmations` from 2 to 1. This lowers the total time needed for a swap by an average of 10 minutes
I'm aware that this has been proposed before (https://github.com/comit-network/xmr-btc-swap/pull/800) and was rejected.
> On the ASB, the bitcoin finality confirmations can be set to 1 using the config file. This will get you the swap reduction time you desire.
I believe this is not correct. There is no way for ASB operators to configure the `bitcoin_finality_confirmations` setting. Only the `target_block` can be configured manually, but this is only used for estimating the fee rate when a btc transaction is published and not for deciding when it is safe to assume that the transaction is finalized.
E.g the `config.toml` file of my (testate) asb
```
[data]
dir = "/root/.local/share/xmr-btc-swap/asb/testnet"
[network]
listen = ["/ip4/0.0.0.0/tcp/9939", "/ip4/0.0.0.0/tcp/9940/ws"]
external_addresses = ["/dnsaddr/unstoppableswap.net"]
rendezvous_point = "/dnsaddr/discover.unstoppableswap.net/p2p/12D3KooWA6cnqJpVnreBVnoro8midDL9Lpzmg8oJPoAGi7YYaamE"
[bitcoin]
electrum_rpc_url = "ssl://electrum.blockstream.info:60002"
target_block = 1 # My asb still waits for 2 confirmations on the btc lock tx
network = "Testnet"
[monero]
wallet_rpc_url = "http://127.0.0.1:38083/json_rpc"
network = "Stagenet"
[tor]
control_port = 9051
socks5_port = 9050
[maker]
min_buy_btc = 0.0001
max_buy_btc = 0.1
ask_spread = 0.00
price_ticker_ws_url = "wss://ws.kraken.com"
```
Co-authored-by: binarybaron <you@domain.com>
Don't wait for refund transaction to receive confirmations to mitigate a scenario where the swap is stuck in `BtcCancelled` because it's not resumable.
975: change to rino docker containers r=lescuer97 a=lescuer97
this is for updating from the melo tools dockers to the rino ones
Fixes#969
Co-authored-by: leonardo <leoescuer@protonmail.com>
This commit updates the rust-toolchain to the current stable version
1.59, and fixes a number of new clippy warnings from that change.
Other changes:
- updates backoff to 0.4
- updates swap to 2021 edition
- updates comfy-table to 5.0
- updates monero-wallet to 2021 edition
- updates moneor-harness to 2021 edition
- updates bdk and rust_decimal
- updates tokio-util to 0.7
- updates workflow to use actions/setup-python@3
- updates pem and serde_with
- adds stable rust toolchain notice to readme
953: Adjust quote based on Bitcoin balance r=lescuer97 a=lescuer97
Fixes#939#963
Please comment in the new method for getting a Monero value, I had to allow clippy::cast_precision_loss to convert to a f64, for our use case I don't really thing we will lose much precision.
Please comment on the implementation of the check.
Co-authored-by: leonardo <leoescuer@protonmail.com>
927: Bump time from 0.3.3 to 0.3.7 r=delta1 a=dependabot[bot]
Bumps [time](https://github.com/time-rs/time) from 0.3.3 to 0.3.7.
<details>
<summary>Release notes</summary>
<p><em>Sourced from <a href="https://github.com/time-rs/time/releases">time's releases</a>.</em></p>
<blockquote>
<h2>v0.3.7</h2>
<p>See the <a href="https://github.com/time-rs/time/blob/main/CHANGELOG.md">changelog</a> for details.</p>
<h2>v0.3.6</h2>
<p>See the <a href="https://github.com/time-rs/time/blob/main/CHANGELOG.md">changelog</a> for details.</p>
<h2>v0.3.5</h2>
<p>See the <a href="https://github.com/time-rs/time/blob/main/CHANGELOG.md">changelog</a> for details.</p>
<h2>v0.3.4</h2>
<p>No release notes provided.</p>
</blockquote>
</details>
<details>
<summary>Changelog</summary>
<p><em>Sourced from <a href="https://github.com/time-rs/time/blob/main/CHANGELOG.md">time's changelog</a>.</em></p>
<blockquote>
<h2>0.3.7 [2021-01-26]</h2>
<h3>Fixed</h3>
<p>Solaris and Illumos build again.</p>
<h2>0.3.6 [2022-01-20]</h2>
<h3>Added</h3>
<ul>
<li><code>Date::saturating_add</code></li>
<li><code>Date::saturating_sub</code></li>
<li><code>PrimitiveDateTime::saturating_add</code></li>
<li><code>PrimitiveDateTime::saturating_sub</code></li>
<li><code>OffsetDateTime::saturating_add</code></li>
<li><code>OffsetDateTime::saturating_sub</code></li>
<li><code>PrimitiveDatetime::MIN</code></li>
<li><code>PrimitiveDatetime::MAX</code></li>
<li><code>Rfc2822</code> format description</li>
<li>Serde support for well-known formats
<ul>
<li>This is placed behind the new <code>serde-well-known</code> feature flag.</li>
</ul>
</li>
</ul>
<h3>Changed</h3>
<ul>
<li>MacOS and FreeBSD are supported obtaining the local offset when single-threaded.
<ul>
<li>Starting with this version, this is delegated to the <code>num_threads</code> crate.</li>
</ul>
</li>
<li>Leap seconds are now parsed as the final nanosecond of the preceding second.</li>
<li>The minimum supported Rust version is now 1.53.0.</li>
<li>Deserializers for human readable formats will fall back to the binary format if the human readable
format fails to deserialize.</li>
</ul>
<h3>Fixed</h3>
<ul>
<li>Deserialization will no longer fail when given a non-borrowed string.</li>
</ul>
<h2>0.3.5 [2021-11-12]</h2>
<h3>Added</h3>
<ul>
<li><code>Date::checked_add</code></li>
<li><code>Date::checked_sub</code></li>
<li><code>PrimitiveDateTime::checked_add</code></li>
<li><code>PrimitiveDateTime::checked_sub</code></li>
<li><code>OffsetDateTime::checked_add</code></li>
<li><code>OffsetDateTime::checked_sub</code></li>
</ul>
<h3>Changed</h3>
<ul>
<li>Attempts to obtain the local UTC offset will now succeed on Linux if the process is
single-threaded. This does not affect other Unix platforms. As a reminder, the relevant methods</li>
</ul>
<!-- raw HTML omitted -->
</blockquote>
<p>... (truncated)</p>
</details>
<details>
<summary>Commits</summary>
<ul>
<li><a href="592ef915cf"><code>592ef91</code></a> v0.3.7 release</li>
<li><a href="deb8161b84"><code>deb8161</code></a> Update CI targets, powerset frequency</li>
<li><a href="83da427e50"><code>83da427</code></a> Fix Solaris/Illumos build</li>
<li><a href="4c63a8a492"><code>4c63a8a</code></a> Add 0.3.6 changelog section (<a href="https://github-redirect.dependabot.com/time-rs/time/issues/435">#435</a>)</li>
<li><a href="3ff4543511"><code>3ff4543</code></a> 0.3.6 release</li>
<li><a href="1dfb2682d9"><code>1dfb268</code></a> Mention, that Instant has no serde support</li>
<li><a href="2b9e193afa"><code>2b9e193</code></a> Bump license year</li>
<li><a href="bf5f830605"><code>bf5f830</code></a> Defer to <code>num_threads</code> for OS support</li>
<li><a href="f6baa3f07e"><code>f6baa3f</code></a> Use more correct feature gates</li>
<li><a href="eef9bafc1a"><code>eef9baf</code></a> Add test for multithreaded Unix systems</li>
<li>Additional commits viewable in <a href="https://github.com/time-rs/time/compare/v0.3.3...v0.3.7">compare view</a></li>
</ul>
</details>
<br />
[](https://docs.github.com/en/github/managing-security-vulnerabilities/about-dependabot-security-updates#about-compatibility-scores)
You can trigger a rebase of this PR by commenting ``@dependabot` rebase`.
[//]: # (dependabot-automerge-start)
[//]: # (dependabot-automerge-end)
---
<details>
<summary>Dependabot commands and options</summary>
<br />
You can trigger Dependabot actions by commenting on this PR:
- ``@dependabot` rebase` will rebase this PR
- ``@dependabot` recreate` will recreate this PR, overwriting any edits that have been made to it
- ``@dependabot` merge` will merge this PR after your CI passes on it
- ``@dependabot` squash and merge` will squash and merge this PR after your CI passes on it
- ``@dependabot` cancel merge` will cancel a previously requested merge and block automerging
- ``@dependabot` reopen` will reopen this PR if it is closed
- ``@dependabot` close` will close this PR and stop Dependabot recreating it. You can achieve the same result by closing it manually
- ``@dependabot` ignore this major version` will close this PR and stop Dependabot creating any more for this major version (unless you reopen the PR or upgrade to it yourself)
- ``@dependabot` ignore this minor version` will close this PR and stop Dependabot creating any more for this minor version (unless you reopen the PR or upgrade to it yourself)
- ``@dependabot` ignore this dependency` will close this PR and stop Dependabot creating any more for this dependency (unless you reopen the PR or upgrade to it yourself)
</details>
928: Bump tokio from 1.12.0 to 1.16.1 r=delta1 a=dependabot[bot]
Bumps [tokio](https://github.com/tokio-rs/tokio) from 1.12.0 to 1.16.1.
<details>
<summary>Release notes</summary>
<p><em>Sourced from <a href="https://github.com/tokio-rs/tokio/releases">tokio's releases</a>.</em></p>
<blockquote>
<h2>Tokio v1.16.1</h2>
<h1>1.16.1 (January 28, 2022)</h1>
<p>This release fixes a bug in <a href="https://github-redirect.dependabot.com/tokio-rs/tokio/issues/4428">#4428</a> with the change <a href="https://github-redirect.dependabot.com/tokio-rs/tokio/issues/4437">#4437</a>.</p>
<p><a href="https://github-redirect.dependabot.com/tokio-rs/tokio/issues/4428">#4428</a>: <a href="https://github-redirect.dependabot.com/tokio-rs/tokio/pull/4428">tokio-rs/tokio#4428</a>
<a href="https://github-redirect.dependabot.com/tokio-rs/tokio/issues/4437">#4437</a>: <a href="https://github-redirect.dependabot.com/tokio-rs/tokio/pull/4437">tokio-rs/tokio#4437</a></p>
<h2>Tokio v1.16.0</h2>
<p>Fixes a soundness bug in <code>io::Take</code> (<a href="https://github-redirect.dependabot.com/tokio-rs/tokio/issues/4428">#4428</a>). The unsoundness is exposed when
leaking memory in the given <code>AsyncRead</code> implementation and then overwriting the
supplied buffer:</p>
<pre lang="rust"><code>impl AsyncRead for Buggy {
fn poll_read(
self: Pin<&mut Self>,
cx: &mut Context<'_>,
buf: &mut ReadBuf<'_>
) -> Poll<Result<()>> {
let new_buf = vec![0; 5].leak();
*buf = ReadBuf::new(new_buf);
buf.put_slice(b"hello");
Poll::Ready(Ok(()))
}
}
</code></pre>
<p>Also, this release includes improvements to the multi-threaded scheduler that
can increase throughput by up to 20% in some cases (<a href="https://github-redirect.dependabot.com/tokio-rs/tokio/issues/4383">#4383</a>).</p>
<h3>Fixed</h3>
<ul>
<li>io: <strong>soundness</strong> don't expose uninitialized memory when using <code>io::Take</code> in edge case (<a href="https://github-redirect.dependabot.com/tokio-rs/tokio/issues/4428">#4428</a>)</li>
<li>fs: ensure <code>File::write</code> results in a <code>write</code> syscall when the runtime shuts down (<a href="https://github-redirect.dependabot.com/tokio-rs/tokio/issues/4316">#4316</a>)</li>
<li>process: drop pipe after child exits in <code>wait_with_output</code> (<a href="https://github-redirect.dependabot.com/tokio-rs/tokio/issues/4315">#4315</a>)</li>
<li>rt: improve error message when spawning a thread fails (<a href="https://github-redirect.dependabot.com/tokio-rs/tokio/issues/4398">#4398</a>)</li>
<li>rt: reduce false-positive thread wakups in the multi-threaded scheduler (<a href="https://github-redirect.dependabot.com/tokio-rs/tokio/issues/4383">#4383</a>)</li>
<li>sync: don't inherit <code>Send</code> from <code>parking_lot::*Guard</code> (<a href="https://github-redirect.dependabot.com/tokio-rs/tokio/issues/4359">#4359</a>)</li>
</ul>
<h3>Added</h3>
<ul>
<li>net: <code>TcpSocket::linger()</code> and <code>set_linger()</code> (<a href="https://github-redirect.dependabot.com/tokio-rs/tokio/issues/4324">#4324</a>)</li>
<li>net: impl <code>UnwindSafe</code> for socket types (<a href="https://github-redirect.dependabot.com/tokio-rs/tokio/issues/4384">#4384</a>)</li>
<li>rt: impl <code>UnwindSafe</code> for <code>JoinHandle</code> (<a href="https://github-redirect.dependabot.com/tokio-rs/tokio/issues/4418">#4418</a>)</li>
<li>sync: <code>watch::Receiver::has_changed()</code> (<a href="https://github-redirect.dependabot.com/tokio-rs/tokio/issues/4342">#4342</a>)</li>
<li>sync: <code>oneshot::Receiver::blocking_recv()</code> (<a href="https://github-redirect.dependabot.com/tokio-rs/tokio/issues/4334">#4334</a>)</li>
<li>sync: <code>RwLock</code> blocking operations (<a href="https://github-redirect.dependabot.com/tokio-rs/tokio/issues/4425">#4425</a>)</li>
</ul>
<h3>Unstable</h3>
<!-- raw HTML omitted -->
</blockquote>
<p>... (truncated)</p>
</details>
<details>
<summary>Commits</summary>
<ul>
<li><a href="91b9850505"><code>91b9850</code></a> chore: prepare Tokio v1.16.1 release (<a href="https://github-redirect.dependabot.com/tokio-rs/tokio/issues/4438">#4438</a>)</li>
<li><a href="3c467056e9"><code>3c46705</code></a> io: fix take pointer check (<a href="https://github-redirect.dependabot.com/tokio-rs/tokio/issues/4437">#4437</a>)</li>
<li><a href="afd2189eec"><code>afd2189</code></a> chore: prepare Tokio v1.16 release (<a href="https://github-redirect.dependabot.com/tokio-rs/tokio/issues/4431">#4431</a>)</li>
<li><a href="986b88b3f1"><code>986b88b</code></a> chore: update year in LICENSE files (<a href="https://github-redirect.dependabot.com/tokio-rs/tokio/issues/4429">#4429</a>)</li>
<li><a href="257053e40b"><code>257053e</code></a> util: add <code>spawn_pinned</code> (<a href="https://github-redirect.dependabot.com/tokio-rs/tokio/issues/3370">#3370</a>)</li>
<li><a href="5af9e0db2b"><code>5af9e0d</code></a> sync: add blocking lock methods to <code>RwLock</code> (<a href="https://github-redirect.dependabot.com/tokio-rs/tokio/issues/4425">#4425</a>)</li>
<li><a href="8f77ee8609"><code>8f77ee8</code></a> net: add generic trait to combine UnixListener and TcpListener (<a href="https://github-redirect.dependabot.com/tokio-rs/tokio/issues/4385">#4385</a>)</li>
<li><a href="2747043f6f"><code>2747043</code></a> tests: enable running wasm32-unknown-unknown tests (<a href="https://github-redirect.dependabot.com/tokio-rs/tokio/issues/4421">#4421</a>)</li>
<li><a href="2a5071fc2d"><code>2a5071f</code></a> feat: implement <code>Framed::map_codec</code> (<a href="https://github-redirect.dependabot.com/tokio-rs/tokio/issues/4427">#4427</a>)</li>
<li><a href="621790e165"><code>621790e</code></a> io: fix <code>take</code> when using evil reader (<a href="https://github-redirect.dependabot.com/tokio-rs/tokio/issues/4428">#4428</a>)</li>
<li>Additional commits viewable in <a href="https://github.com/tokio-rs/tokio/compare/tokio-1.12.0...tokio-1.16.1">compare view</a></li>
</ul>
</details>
<br />
[](https://docs.github.com/en/github/managing-security-vulnerabilities/about-dependabot-security-updates#about-compatibility-scores)
You can trigger a rebase of this PR by commenting ``@dependabot` rebase`.
[//]: # (dependabot-automerge-start)
[//]: # (dependabot-automerge-end)
---
<details>
<summary>Dependabot commands and options</summary>
<br />
You can trigger Dependabot actions by commenting on this PR:
- ``@dependabot` rebase` will rebase this PR
- ``@dependabot` recreate` will recreate this PR, overwriting any edits that have been made to it
- ``@dependabot` merge` will merge this PR after your CI passes on it
- ``@dependabot` squash and merge` will squash and merge this PR after your CI passes on it
- ``@dependabot` cancel merge` will cancel a previously requested merge and block automerging
- ``@dependabot` reopen` will reopen this PR if it is closed
- ``@dependabot` close` will close this PR and stop Dependabot recreating it. You can achieve the same result by closing it manually
- ``@dependabot` ignore this major version` will close this PR and stop Dependabot creating any more for this major version (unless you reopen the PR or upgrade to it yourself)
- ``@dependabot` ignore this minor version` will close this PR and stop Dependabot creating any more for this minor version (unless you reopen the PR or upgrade to it yourself)
- ``@dependabot` ignore this dependency` will close this PR and stop Dependabot creating any more for this dependency (unless you reopen the PR or upgrade to it yourself)
</details>
945: Bump dialoguer from 0.8.0 to 0.10.0 r=delta1 a=dependabot[bot]
Bumps [dialoguer](https://github.com/mitsuhiko/dialoguer) from 0.8.0 to 0.10.0.
<details>
<summary>Changelog</summary>
<p><em>Sourced from <a href="https://github.com/mitsuhiko/dialoguer/blob/master/CHANGELOG.md">dialoguer's changelog</a>.</em></p>
<blockquote>
<h2>0.10.0</h2>
<h3>Enhancements</h3>
<ul>
<li>Loosen some trait bounds</li>
<li>Improve keyboard interactions (<a href="https://github-redirect.dependabot.com/mitsuhiko/dialoguer/issues/141">#141</a>, <a href="https://github-redirect.dependabot.com/mitsuhiko/dialoguer/issues/162">#162</a>)</li>
<li>Added <code>max_length</code> to <code>MultiSelect</code>, <code>Select</code> and <code>Sort</code></li>
<li>Allow completion support for <code>Input::interact_text*</code> behind <code>completion</code> feature</li>
</ul>
<h3>Breaking</h3>
<ul>
<li>All prompts <code>*::new</code> will now don't report selected values unless <code>report(true)</code> is called on them.</li>
</ul>
<h2>0.9.0</h2>
<h3>Enhancements</h3>
<ul>
<li>Apply input validation to the default value too in <code>Input</code></li>
<li>Added <code>FuzzySelect</code> behind <code>fuzzy-select</code> feature</li>
<li>Allow history processing for <code>Input::interact_text*</code> behind <code>history</code> feature</li>
<li>Added <code>interact_*_opt</code> methods for <code>MultiSelect</code> and <code>Sort</code>.</li>
</ul>
<h3>Breaking</h3>
<ul>
<li>Updated MSRV to <code>1.51.0</code></li>
<li><code>Editor</code> is gated behind <code>editor</code> feature</li>
<li><code>Password</code>, <code>Theme::format_password_prompt</code> and <code>Theme::format_password_prompt_selection</code> are gated behind <code>password</code> feature</li>
<li>Remove <code>Select::paged()</code>, <code>Sort::paged()</code> and <code>MultiSelect::paged()</code> in favor of automatic paging based on terminal size</li>
</ul>
</blockquote>
</details>
<details>
<summary>Commits</summary>
<ul>
<li><a href="e93d99320d"><code>e93d993</code></a> Release 0.10.0</li>
<li><a href="c93224aec4"><code>c93224a</code></a> Merge pull request <a href="https://github-redirect.dependabot.com/mitsuhiko/dialoguer/issues/162">#162</a> from craciuncezar/limit-visible-options-in-fuzzy-select</li>
<li><a href="dee84e93f3"><code>dee84e9</code></a> Merge pull request <a href="https://github-redirect.dependabot.com/mitsuhiko/dialoguer/issues/169">#169</a> from bryanhitc/bryanhitc/fix-completion-buffer-overflow</li>
<li><a href="e4ffea8902"><code>e4ffea8</code></a> fix formatting and improve naming</li>
<li><a href="cb1e9a5ce6"><code>cb1e9a5</code></a> Fix buffer overflow for completion example</li>
<li><a href="252a183fe0"><code>252a183</code></a> Fix linting warnings</li>
<li><a href="f1e46a55e9"><code>f1e46a5</code></a> Add scroll functionality</li>
<li><a href="94a276d9e8"><code>94a276d</code></a> Limit the number of visible options in fuzzy select</li>
<li><a href="29da763bf7"><code>29da763</code></a> Merge pull request <a href="https://github-redirect.dependabot.com/mitsuhiko/dialoguer/issues/153">#153</a> from danieleades/refactor/clippy</li>
<li><a href="8fde6ae39b"><code>8fde6ae</code></a> lint examples and tests</li>
<li>Additional commits viewable in <a href="https://github.com/mitsuhiko/dialoguer/compare/0.8.0...v0.10.0">compare view</a></li>
</ul>
</details>
<br />
[](https://docs.github.com/en/github/managing-security-vulnerabilities/about-dependabot-security-updates#about-compatibility-scores)
You can trigger a rebase of this PR by commenting ``@dependabot` rebase`.
[//]: # (dependabot-automerge-start)
[//]: # (dependabot-automerge-end)
---
<details>
<summary>Dependabot commands and options</summary>
<br />
You can trigger Dependabot actions by commenting on this PR:
- ``@dependabot` rebase` will rebase this PR
- ``@dependabot` recreate` will recreate this PR, overwriting any edits that have been made to it
- ``@dependabot` merge` will merge this PR after your CI passes on it
- ``@dependabot` squash and merge` will squash and merge this PR after your CI passes on it
- ``@dependabot` cancel merge` will cancel a previously requested merge and block automerging
- ``@dependabot` reopen` will reopen this PR if it is closed
- ``@dependabot` close` will close this PR and stop Dependabot recreating it. You can achieve the same result by closing it manually
- ``@dependabot` ignore this major version` will close this PR and stop Dependabot creating any more for this major version (unless you reopen the PR or upgrade to it yourself)
- ``@dependabot` ignore this minor version` will close this PR and stop Dependabot creating any more for this minor version (unless you reopen the PR or upgrade to it yourself)
- ``@dependabot` ignore this dependency` will close this PR and stop Dependabot creating any more for this dependency (unless you reopen the PR or upgrade to it yourself)
</details>
Co-authored-by: dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com>
881: Record the monero-wallet-restore blockcheight before locking BTC r=da-kami a=da-kami
This solves issues where the CLI went offline after sending the BTC transaction, and the monero wallet restore blockheight being recorded after Alice locked the Monero, resulting in the generated XMR redeem wallet not detecting the transaction and reporting `No unlocked balance in the specified account`.
Co-authored-by: Daniel Karzel <daniel@comit.network>
This solves issues where the CLI went offline after sending the BTC transaction, and the monero wallet restore blockheight being recorded after Alice locked the Monero, resulting in the generated XMR redeem wallet not detecting the transaction and reporting `No unlocked balance in the specified account`.
841: Bump actions/checkout from 2.3.4 to 2.4.0 r=rishflab a=dependabot[bot]
Bumps [actions/checkout](https://github.com/actions/checkout) from 2.3.4 to 2.4.0.
<details>
<summary>Release notes</summary>
<p><em>Sourced from <a href="https://github.com/actions/checkout/releases">actions/checkout's releases</a>.</em></p>
<blockquote>
<h2>v2.4.0</h2>
<ul>
<li>Convert SSH URLs like <code>org-<ORG_ID>`@github.com:</code>` to <code>https://github.com/</code> - <a href="https://github-redirect.dependabot.com/actions/checkout/pull/621">pr</a></li>
</ul>
<h2>v2.3.5</h2>
<p>Update dependencies</p>
</blockquote>
</details>
<details>
<summary>Commits</summary>
<ul>
<li><a href="ec3a7ce113"><code>ec3a7ce</code></a> set insteadOf url for org-id (<a href="https://github-redirect.dependabot.com/actions/checkout/issues/621">#621</a>)</li>
<li><a href="fd47087372"><code>fd47087</code></a> codeql should analyze lib not dist (<a href="https://github-redirect.dependabot.com/actions/checkout/issues/620">#620</a>)</li>
<li><a href="3d677ac575"><code>3d677ac</code></a> script to generate license info (<a href="https://github-redirect.dependabot.com/actions/checkout/issues/614">#614</a>)</li>
<li><a href="826ba42d6c"><code>826ba42</code></a> npm audit fix (<a href="https://github-redirect.dependabot.com/actions/checkout/issues/612">#612</a>)</li>
<li><a href="eb8a193c1d"><code>eb8a193</code></a> update dev dependencies and react to new linting rules (<a href="https://github-redirect.dependabot.com/actions/checkout/issues/611">#611</a>)</li>
<li><a href="c49af7ca1f"><code>c49af7c</code></a> Create codeql-analysis.yml (<a href="https://github-redirect.dependabot.com/actions/checkout/issues/602">#602</a>)</li>
<li><a href="1e204e9a92"><code>1e204e9</code></a> update licensed check (<a href="https://github-redirect.dependabot.com/actions/checkout/issues/606">#606</a>)</li>
<li><a href="0299a0d2b6"><code>0299a0d</code></a> update dist (<a href="https://github-redirect.dependabot.com/actions/checkout/issues/605">#605</a>)</li>
<li><a href="be0f448456"><code>be0f448</code></a> Bump ws from 5.2.2 to 5.2.3 (<a href="https://github-redirect.dependabot.com/actions/checkout/issues/604">#604</a>)</li>
<li><a href="56c00a7b1f"><code>56c00a7</code></a> Bump tmpl from 1.0.4 to 1.0.5 (<a href="https://github-redirect.dependabot.com/actions/checkout/issues/588">#588</a>)</li>
<li>Additional commits viewable in <a href="https://github.com/actions/checkout/compare/v2.3.4...v2.4.0">compare view</a></li>
</ul>
</details>
<br />
[](https://docs.github.com/en/github/managing-security-vulnerabilities/about-dependabot-security-updates#about-compatibility-scores)
You can trigger a rebase of this PR by commenting ``@dependabot` rebase`.
[//]: # (dependabot-automerge-start)
[//]: # (dependabot-automerge-end)
---
<details>
<summary>Dependabot commands and options</summary>
<br />
You can trigger Dependabot actions by commenting on this PR:
- ``@dependabot` rebase` will rebase this PR
- ``@dependabot` recreate` will recreate this PR, overwriting any edits that have been made to it
- ``@dependabot` merge` will merge this PR after your CI passes on it
- ``@dependabot` squash and merge` will squash and merge this PR after your CI passes on it
- ``@dependabot` cancel merge` will cancel a previously requested merge and block automerging
- ``@dependabot` reopen` will reopen this PR if it is closed
- ``@dependabot` close` will close this PR and stop Dependabot recreating it. You can achieve the same result by closing it manually
- ``@dependabot` ignore this major version` will close this PR and stop Dependabot creating any more for this major version (unless you reopen the PR or upgrade to it yourself)
- ``@dependabot` ignore this minor version` will close this PR and stop Dependabot creating any more for this minor version (unless you reopen the PR or upgrade to it yourself)
- ``@dependabot` ignore this dependency` will close this PR and stop Dependabot creating any more for this dependency (unless you reopen the PR or upgrade to it yourself)
</details>
846: Bump strum from 0.21.0 to 0.23.0 r=rishflab a=dependabot[bot]
Bumps [strum](https://github.com/Peternator7/strum) from 0.21.0 to 0.23.0.
<details>
<summary>Changelog</summary>
<p><em>Sourced from <a href="https://github.com/Peternator7/strum/blob/master/CHANGELOG.md">strum's changelog</a>.</em></p>
<blockquote>
<h2>0.23.0</h2>
<ul>
<li>
<p><a href="https://github-redirect.dependabot.com/Peternator7/strum/pull/185">#185</a> Adds the <code>FromRepr</code> derive that adds a <code>from_repr(x: usize) -> Option<Self></code>
method to your enum. This lets you convert integer values to your enum. If you specify a #[repr(..)] attribute on your enum, or use
an explicit discriminant, this will be incorporated into the derive.</p>
<ul>
<li><code>from_repr</code> will be <code>const</code> if you use a recent rust version.</li>
<li>This cannot be a trait method currently because only inherent methods support <code>const</code>.</li>
</ul>
</li>
<li>
<p><a href="https://github-redirect.dependabot.com/Peternator7/strum/pull/186">#186</a> Automatically implement <code>TryFrom<str></code> for enums that implement <code>EnumString</code>.
This is only enabled for rustc >= 1.34 which is when `TryFrom was stabilized.</p>
<ul>
<li>This is a small breaking change. If you had manually implemented <code>TryFrom<str></code> for your enum, this will cause a conflict. You
can probably remove your manual implementation.</li>
</ul>
</li>
<li>
<p><a href="https://github-redirect.dependabot.com/Peternator7/strum/pull/189">#189</a> Use <code>core::result::Result</code> instead of <code>std::result::Result</code>. This should be
more portable in no-std environments.</p>
</li>
</ul>
<h2>0.22.0</h2>
<ul>
<li>
<p><a href="https://github-redirect.dependabot.com/Peternator7/strum/pull/180">#180</a>: Deprecates <code>ToString</code> derive. You should use <code>Display</code>
instead.</p>
</li>
<li>
<p><a href="https://github-redirect.dependabot.com/Peternator7/strum/pull/178">#178</a>: Deprecates AsStaticStr. This has been undocumented for a while.
The recommended method is to derive <code>IntoStaticStr</code> instead.</p>
</li>
<li>
<p><a href="https://github-redirect.dependabot.com/Peternator7/strum/pull/171">#171</a>: Improve <code>no-std</code> support.</p>
</li>
<li>
<p><a href="https://github-redirect.dependabot.com/Peternator7/strum/pull/170">#170</a>: enable changing the path to strum traits. This is necessary
if you re-export strum as a submodule in another crate.</p>
</li>
</ul>
<h2>0.21.1</h2>
<ul>
<li><a href="https://github-redirect.dependabot.com/Peternator7/strum/pull/164">#164</a> Improve compatibility with older versions of <code>syn</code>.</li>
</ul>
</blockquote>
</details>
<details>
<summary>Commits</summary>
<ul>
<li>See full diff in <a href="https://github.com/Peternator7/strum/commits">compare view</a></li>
</ul>
</details>
<br />
[](https://docs.github.com/en/github/managing-security-vulnerabilities/about-dependabot-security-updates#about-compatibility-scores)
You can trigger a rebase of this PR by commenting ``@dependabot` rebase`.
[//]: # (dependabot-automerge-start)
[//]: # (dependabot-automerge-end)
---
<details>
<summary>Dependabot commands and options</summary>
<br />
You can trigger Dependabot actions by commenting on this PR:
- ``@dependabot` rebase` will rebase this PR
- ``@dependabot` recreate` will recreate this PR, overwriting any edits that have been made to it
- ``@dependabot` merge` will merge this PR after your CI passes on it
- ``@dependabot` squash and merge` will squash and merge this PR after your CI passes on it
- ``@dependabot` cancel merge` will cancel a previously requested merge and block automerging
- ``@dependabot` reopen` will reopen this PR if it is closed
- ``@dependabot` close` will close this PR and stop Dependabot recreating it. You can achieve the same result by closing it manually
- ``@dependabot` ignore this major version` will close this PR and stop Dependabot creating any more for this major version (unless you reopen the PR or upgrade to it yourself)
- ``@dependabot` ignore this minor version` will close this PR and stop Dependabot creating any more for this minor version (unless you reopen the PR or upgrade to it yourself)
- ``@dependabot` ignore this dependency` will close this PR and stop Dependabot creating any more for this dependency (unless you reopen the PR or upgrade to it yourself)
</details>
851: Bump actions/setup-python from 2.2.2 to 2.3.1 r=rishflab a=dependabot[bot]
Bumps [actions/setup-python](https://github.com/actions/setup-python) from 2.2.2 to 2.3.1.
<details>
<summary>Release notes</summary>
<p><em>Sourced from <a href="https://github.com/actions/setup-python/releases">actions/setup-python's releases</a>.</em></p>
<blockquote>
<h2>Update actions/cache version to 1.0.8</h2>
<p>We have updated <a href="https://github.com/actions/toolkit/blob/main/packages/cache/RELEASES.md#108">actions/cache</a> dependency version to 1.0.8 to support 10GB cache upload</p>
<h2>Support caching dependencies</h2>
<p>This release introduces dependency caching support (<a href="https://github-redirect.dependabot.com/actions/setup-python/pull/266">actions/setup-python#266</a>)</p>
<h2>Caching dependencies.</h2>
<p>The action has a built-in functionality for caching and restoring pip/pipenv dependencies. The <code>cache</code> input is optional, and caching is turned off by default.</p>
<p>Besides, this release introduces dependency caching support for mono repos and repositories with complex structure.</p>
<p>By default, the action searches for the dependency file (requirements.txt for pip or Pipfile.lock for pipenv) in the whole repository. Use the <code>cache-dependency-path</code> input for cases when you want to override current behaviour and use different file for hash generation (for example requirements-dev.txt). This input supports wildcards or a list of file names for caching multiple dependencies.</p>
<h3>Caching pip dependencies:</h3>
<pre><code>steps:
- uses: actions/checkout@v2
- uses: actions/setup-python@v2
with:
python-version: '3.9'
cache: 'pip'
- run: pip install -r requirements.txt
- run: pip test
</code></pre>
<h3>Caching pipenv dependencies:</h3>
<pre><code>steps:
- uses: actions/checkout@v2
- name: Install pipenv
run: pipx install pipenv
- uses: actions/setup-python@v2
with:
python-version: '3.9'
cache: 'pipenv'
- run: pipenv install
- run: pipenv test
</code></pre>
<h3>Change dependency file:</h3>
<pre><code>steps:
- uses: actions/checkout@v2
- uses: actions/setup-python@v2
with:
python-version: '3.9'
cache: 'pip'
cache-dependency-path: '**/requirements-dev.txt'
- run: pip install -r subdirectory/requirements-dev.txt
- run: pip test
</tr></table>
</code></pre>
</blockquote>
<p>... (truncated)</p>
</details>
<details>
<summary>Commits</summary>
<ul>
<li><a href="f382193329"><code>f382193</code></a> Update <code>`@actions/cache</code>` version to 1.0.8 (<a href="https://github-redirect.dependabot.com/actions/setup-python/issues/283">#283</a>)</li>
<li><a href="3ef38b826b"><code>3ef38b8</code></a> Create ADR for integrating cache functionality to setup-python action (<a href="https://github-redirect.dependabot.com/actions/setup-python/issues/247">#247</a>)</li>
<li><a href="0066b88440"><code>0066b88</code></a> Add a workflow to release a new version of the action (<a href="https://github-redirect.dependabot.com/actions/setup-python/issues/274">#274</a>)</li>
<li><a href="280924fbef"><code>280924f</code></a> Implementation of python's caching (<a href="https://github-redirect.dependabot.com/actions/setup-python/issues/266">#266</a>)</li>
<li><a href="52636cf49a"><code>52636cf</code></a> Fix consistency in README (<a href="https://github-redirect.dependabot.com/actions/setup-python/issues/250">#250</a>)</li>
<li><a href="ca5c59064f"><code>ca5c590</code></a> Update version for setup-python in package.json (<a href="https://github-redirect.dependabot.com/actions/setup-python/issues/264">#264</a>)</li>
<li><a href="feeaa3ba49"><code>feeaa3b</code></a> Add issue and pull request templates (<a href="https://github-redirect.dependabot.com/actions/setup-python/issues/258">#258</a>)</li>
<li><a href="002b1e4044"><code>002b1e4</code></a> Change python version for pypy in workflow files (<a href="https://github-redirect.dependabot.com/actions/setup-python/issues/259">#259</a>)</li>
<li><a href="d12543aa2a"><code>d12543a</code></a> Merge pull request <a href="https://github-redirect.dependabot.com/actions/setup-python/issues/252">#252</a> from dmitry-shibanov/v-dmshib/update-dependencies</li>
<li><a href="4aa563ba8c"><code>4aa563b</code></a> update dependencies</li>
<li>Additional commits viewable in <a href="https://github.com/actions/setup-python/compare/v2.2.2...v2.3.1">compare view</a></li>
</ul>
</details>
<br />
[](https://docs.github.com/en/github/managing-security-vulnerabilities/about-dependabot-security-updates#about-compatibility-scores)
You can trigger a rebase of this PR by commenting ``@dependabot` rebase`.
[//]: # (dependabot-automerge-start)
[//]: # (dependabot-automerge-end)
---
<details>
<summary>Dependabot commands and options</summary>
<br />
You can trigger Dependabot actions by commenting on this PR:
- ``@dependabot` rebase` will rebase this PR
- ``@dependabot` recreate` will recreate this PR, overwriting any edits that have been made to it
- ``@dependabot` merge` will merge this PR after your CI passes on it
- ``@dependabot` squash and merge` will squash and merge this PR after your CI passes on it
- ``@dependabot` cancel merge` will cancel a previously requested merge and block automerging
- ``@dependabot` reopen` will reopen this PR if it is closed
- ``@dependabot` close` will close this PR and stop Dependabot recreating it. You can achieve the same result by closing it manually
- ``@dependabot` ignore this major version` will close this PR and stop Dependabot creating any more for this major version (unless you reopen the PR or upgrade to it yourself)
- ``@dependabot` ignore this minor version` will close this PR and stop Dependabot creating any more for this minor version (unless you reopen the PR or upgrade to it yourself)
- ``@dependabot` ignore this dependency` will close this PR and stop Dependabot creating any more for this dependency (unless you reopen the PR or upgrade to it yourself)
</details>
880: Add `monero-recovery` command to print address + view/spend keys r=rishflab a=da-kami
This allows manual recovery of problems like https://github.com/comit-network/xmr-btc-swap/issues/537
Since we could not figure out what causes this issue, and it is most likely an upstream problem this is the best we can do so far to allow the user to manually interact with `monero-wallet-cli` or `monero-wallet-rpc`.
884: Bump pem from 1.0.0 to 1.0.1 r=rishflab a=dependabot[bot]
Bumps [pem](https://github.com/jcreekmore/pem-rs) from 1.0.0 to 1.0.1.
<details>
<summary>Changelog</summary>
<p><em>Sourced from <a href="https://github.com/jcreekmore/pem-rs/blob/master/CHANGELOG.md">pem's changelog</a>.</em></p>
<blockquote>
<h1>1.0.1</h1>
<ul>
<li>hide the ASCII_ARMOR symbol to work around a linking issue with 32-bit windows builds</li>
</ul>
<h1>1.0</h1>
<ul>
<li><code>pem::parse_many</code> now returns a <code>Result<Vec<Pem>></code> instead of a <code>Vec<Pem></code> that silently discarded invalid sections.</li>
</ul>
</blockquote>
</details>
<details>
<summary>Commits</summary>
<ul>
<li><a href="20e9699def"><code>20e9699</code></a> (cargo-release) version 1.0.1</li>
<li><a href="5fa4dbdffb"><code>5fa4dbd</code></a> Merge pull request <a href="https://github-redirect.dependabot.com/jcreekmore/pem-rs/issues/30">#30</a> from jcreekmore/refactor-ascii-armor</li>
<li><a href="fb15d5c679"><code>fb15d5c</code></a> hide the ASCII_ARMOR symbol</li>
<li><a href="4137641d44"><code>4137641</code></a> (cargo-release) start next development iteration 1.0.1-alpha.0</li>
<li>See full diff in <a href="https://github.com/jcreekmore/pem-rs/compare/v1.0.0...v1.0.1">compare view</a></li>
</ul>
</details>
<br />
[](https://docs.github.com/en/github/managing-security-vulnerabilities/about-dependabot-security-updates#about-compatibility-scores)
You can trigger a rebase of this PR by commenting ``@dependabot` rebase`.
[//]: # (dependabot-automerge-start)
[//]: # (dependabot-automerge-end)
---
<details>
<summary>Dependabot commands and options</summary>
<br />
You can trigger Dependabot actions by commenting on this PR:
- ``@dependabot` rebase` will rebase this PR
- ``@dependabot` recreate` will recreate this PR, overwriting any edits that have been made to it
- ``@dependabot` merge` will merge this PR after your CI passes on it
- ``@dependabot` squash and merge` will squash and merge this PR after your CI passes on it
- ``@dependabot` cancel merge` will cancel a previously requested merge and block automerging
- ``@dependabot` reopen` will reopen this PR if it is closed
- ``@dependabot` close` will close this PR and stop Dependabot recreating it. You can achieve the same result by closing it manually
- ``@dependabot` ignore this major version` will close this PR and stop Dependabot creating any more for this major version (unless you reopen the PR or upgrade to it yourself)
- ``@dependabot` ignore this minor version` will close this PR and stop Dependabot creating any more for this minor version (unless you reopen the PR or upgrade to it yourself)
- ``@dependabot` ignore this dependency` will close this PR and stop Dependabot creating any more for this dependency (unless you reopen the PR or upgrade to it yourself)
</details>
885: Bump hyper from 0.14.13 to 0.14.16 r=rishflab a=dependabot[bot]
Bumps [hyper](https://github.com/hyperium/hyper) from 0.14.13 to 0.14.16.
<details>
<summary>Release notes</summary>
<p><em>Sourced from <a href="https://github.com/hyperium/hyper/releases">hyper's releases</a>.</em></p>
<blockquote>
<h2>v0.14.16</h2>
<h2>Features</h2>
<ul>
<li><strong>http2:</strong> add <code>http2_max_send_buf_size</code> option to client and server (<a href="bff977b73c">bff977b7</a>)</li>
<li><strong>server:</strong> add HTTP/1 header read timeout option (<a href="https://github-redirect.dependabot.com/hyperium/hyper/issues/2675">#2675</a>) (<a href="842c6553a5">842c6553</a>, closes <a href="https://github-redirect.dependabot.com/hyperium/hyper/issues/2457">#2457</a>)</li>
</ul>
<h2>Bug Fixes</h2>
<ul>
<li><strong>http1:</strong> return 414 when URI contains more than 65534 characters (<a href="https://github-redirect.dependabot.com/hyperium/hyper/issues/2706">#2706</a>) (<a href="5f938fffa6">5f938fff</a>, closes <a href="https://github-redirect.dependabot.com/hyperium/hyper/issues/2701">#2701</a>)</li>
<li><strong>http2:</strong> received <code>Body::size_hint()</code> now return 0 if implicitly empty (<a href="https://github-redirect.dependabot.com/hyperium/hyper/issues/2715">#2715</a>) (<a href="84b78b6c87">84b78b6c</a>)</li>
<li><strong>server:</strong> use case-insensitive comparison for Expect: 100-continue (<a href="https://github-redirect.dependabot.com/hyperium/hyper/issues/2709">#2709</a>) (<a href="7435cc3399">7435cc33</a>, closes <a href="https://github-redirect.dependabot.com/hyperium/hyper/issues/2708">#2708</a>)</li>
</ul>
<h2>New Contributors</h2>
<ul>
<li><a href="https://github.com/rajing"><code>`@rajing</code></a>` made their first contribution in <a href="https://github-redirect.dependabot.com/hyperium/hyper/pull/2706">hyperium/hyper#2706</a></li>
<li><a href="https://github.com/JonathanMurray"><code>`@JonathanMurray</code></a>` made their first contribution in <a href="https://github-redirect.dependabot.com/hyperium/hyper/pull/2709">hyperium/hyper#2709</a></li>
</ul>
<h2>v0.14.15</h2>
<h2>Bug Fixes</h2>
<ul>
<li><strong>client:</strong> cancel blocking DNS lookup if <code>GaiFuture</code> is dropped (<a href="https://github.com/hyperium/hyper/commit/174b553d">174b553d</a>)</li>
</ul>
<h2>Features</h2>
<ul>
<li><strong>http1:</strong> add <code>http1_writev(bool)</code> options to Client and Server builders, to allow forcing vectored writes (<a href="https://github.com/hyperium/hyper/commit/80627141">80627141</a>)</li>
<li><strong>upgrade:</strong> allow http upgrades with any body type (<a href="ab469eb3c6">ab469eb3</a>)</li>
</ul>
<h2>New Contributors</h2>
<ul>
<li><a href="https://github.com/luqmana"><code>`@luqmana</code></a>` made their first contribution in <a href="https://github-redirect.dependabot.com/hyperium/hyper/pull/2680">hyperium/hyper#2680</a></li>
<li><a href="https://github.com/whentze"><code>`@whentze</code></a>` made their first contribution in <a href="https://github-redirect.dependabot.com/hyperium/hyper/pull/2688">hyperium/hyper#2688</a></li>
<li><a href="https://github.com/ahmedsobeh"><code>`@ahmedsobeh</code></a>` made their first contribution in <a href="https://github-redirect.dependabot.com/hyperium/hyper/pull/2689">hyperium/hyper#2689</a></li>
</ul>
<h2>v0.14.14</h2>
<h2>Bug Fixes</h2>
<ul>
<li><strong>client:</strong>
<ul>
<li>make ResponseFuture implement Sync (<a href="bd6c35b98f">bd6c35b9</a>)</li>
<li>remove ipv6 square brackets before resolving (<a href="910e02687d">910e0268</a>)</li>
</ul>
</li>
</ul>
<h2>Features</h2>
<ul>
<li><strong>http2:</strong> always include original h2 error on broken pipe (<a href="6169db250c">6169db25</a>)</li>
<li><strong>server:</strong> Remove Send + Sync requirement for Body in with_graceful_shutdown (<a href="1d553e52c6">1d553e52</a>)</li>
</ul>
</blockquote>
</details>
<details>
<summary>Changelog</summary>
<p><em>Sourced from <a href="https://github.com/hyperium/hyper/blob/master/CHANGELOG.md">hyper's changelog</a>.</em></p>
<blockquote>
<h3>v0.14.16 (2021-12-09)</h3>
<h4>Bug Fixes</h4>
<ul>
<li><strong>http1:</strong> return 414 when URI contains more than 65534 characters (<a href="https://github-redirect.dependabot.com/hyperium/hyper/issues/2706">#2706</a>) (<a href="5f938fffa6">5f938fff</a>, closes <a href="https://github-redirect.dependabot.com/hyperium/hyper/issues/2701">#2701</a>)</li>
<li><strong>http2:</strong> received <code>Body::size_hint()</code> now return 0 if implicitly empty (<a href="https://github-redirect.dependabot.com/hyperium/hyper/issues/2715">#2715</a>) (<a href="84b78b6c87">84b78b6c</a>)</li>
<li><strong>server:</strong> use case-insensitive comparison for Expect: 100-continue (<a href="https://github-redirect.dependabot.com/hyperium/hyper/issues/2709">#2709</a>) (<a href="7435cc3399">7435cc33</a>, closes <a href="https://github-redirect.dependabot.com/hyperium/hyper/issues/2708">#2708</a>)</li>
</ul>
<h4>Features</h4>
<ul>
<li><strong>http2:</strong> add <code>http2_max_send_buf_size</code> option to client and server (<a href="bff977b73c">bff977b7</a>)</li>
<li><strong>server:</strong> add HTTP/1 header read timeout option (<a href="https://github-redirect.dependabot.com/hyperium/hyper/issues/2675">#2675</a>) (<a href="842c6553a5">842c6553</a>, closes <a href="https://github-redirect.dependabot.com/hyperium/hyper/issues/2457">#2457</a>)</li>
</ul>
<h3>v0.14.15 (2021-11-16)</h3>
<h4>Bug Fixes</h4>
<ul>
<li><strong>client:</strong> cancel blocking DNS lookup if <code>GaiFuture</code> is dropped (<a href="https://github.com/hyperium/hyper/commit/174b553d">174b553d</a></li>
</ul>
<h4>Features</h4>
<ul>
<li><strong>http1:</strong> add <code>http1_writev(bool)</code> options to Client and Server builders, to allow forcing vectored writes (<a href="https://github.com/hyperium/hyper/commit/80627141">80627141</a>)</li>
<li><strong>upgrade:</strong> allow http upgrades with any body type (<a href="ab469eb3c6">ab469eb3</a>)</li>
</ul>
<h3>v0.14.14 (2021-10-22)</h3>
<h4>Bug Fixes</h4>
<ul>
<li><strong>client:</strong>
<ul>
<li>make ResponseFuture implement Sync (<a href="bd6c35b98f">bd6c35b9</a>)</li>
<li>remove ipv6 square brackets before resolving (<a href="910e02687d">910e0268</a>)</li>
</ul>
</li>
</ul>
<h4>Features</h4>
<ul>
<li><strong>h2:</strong> always include original h2 error on broken pipe (<a href="6169db250c">6169db25</a>)</li>
<li><strong>server:</strong> Remove Send + Sync requirement for Body in with_graceful_shutdown (<a href="1d553e52c6">1d553e52</a>)</li>
</ul>
</blockquote>
</details>
<details>
<summary>Commits</summary>
<ul>
<li><a href="41dee4a79b"><code>41dee4a</code></a> v0.14.16</li>
<li><a href="bff977b73c"><code>bff977b</code></a> feat(http2): add <code>http2_max_send_buf_size</code> option to client and server</li>
<li><a href="84b78b6c87"><code>84b78b6</code></a> fix(http2): received <code>Body::size_hint()</code> now return 0 if implicitly empty (<a href="https://github-redirect.dependabot.com/hyperium/hyper/issues/2">#2</a>...</li>
<li><a href="ce8242571f"><code>ce82425</code></a> refactor(lib): resolve unused warnings from server-specific code (<a href="https://github-redirect.dependabot.com/hyperium/hyper/issues/2710">#2710</a>)</li>
<li><a href="7435cc3399"><code>7435cc3</code></a> fix(server): use case-insensitive comparison for Expect: 100-continue (<a href="https://github-redirect.dependabot.com/hyperium/hyper/issues/2709">#2709</a>)</li>
<li><a href="5f938fffa6"><code>5f938ff</code></a> fix(http1): return 414 when URI contains more than 65534 characters (<a href="https://github-redirect.dependabot.com/hyperium/hyper/issues/2706">#2706</a>)</li>
<li><a href="1010614a0d"><code>1010614</code></a> test(client): refactor client helper macro to handle options better</li>
<li><a href="842c6553a5"><code>842c655</code></a> feat(server): add HTTP/1 header read timeout option (<a href="https://github-redirect.dependabot.com/hyperium/hyper/issues/2675">#2675</a>)</li>
<li><a href="d0b1d9ed3a"><code>d0b1d9e</code></a> v0.14.15</li>
<li><a href="a1502e1067"><code>a1502e1</code></a> docs(http1): clarify HTTP1 preserve case option</li>
<li>Additional commits viewable in <a href="https://github.com/hyperium/hyper/compare/v0.14.13...v0.14.16">compare view</a></li>
</ul>
</details>
<br />
[](https://docs.github.com/en/github/managing-security-vulnerabilities/about-dependabot-security-updates#about-compatibility-scores)
You can trigger a rebase of this PR by commenting ``@dependabot` rebase`.
[//]: # (dependabot-automerge-start)
[//]: # (dependabot-automerge-end)
---
<details>
<summary>Dependabot commands and options</summary>
<br />
You can trigger Dependabot actions by commenting on this PR:
- ``@dependabot` rebase` will rebase this PR
- ``@dependabot` recreate` will recreate this PR, overwriting any edits that have been made to it
- ``@dependabot` merge` will merge this PR after your CI passes on it
- ``@dependabot` squash and merge` will squash and merge this PR after your CI passes on it
- ``@dependabot` cancel merge` will cancel a previously requested merge and block automerging
- ``@dependabot` reopen` will reopen this PR if it is closed
- ``@dependabot` close` will close this PR and stop Dependabot recreating it. You can achieve the same result by closing it manually
- ``@dependabot` ignore this major version` will close this PR and stop Dependabot creating any more for this major version (unless you reopen the PR or upgrade to it yourself)
- ``@dependabot` ignore this minor version` will close this PR and stop Dependabot creating any more for this minor version (unless you reopen the PR or upgrade to it yourself)
- ``@dependabot` ignore this dependency` will close this PR and stop Dependabot creating any more for this dependency (unless you reopen the PR or upgrade to it yourself)
</details>
Co-authored-by: dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com>
Co-authored-by: Daniel Karzel <daniel@comit.network>
860: Properly format output of commands `history`, `config`, `balance` and `list-sellers` using tracing r=rishflab a=binarybaron
Properly format output of commands `history`, `config`, `balance` and `list-sellers` using tracing
Closes https://github.com/comit-network/xmr-btc-swap/issues/766
Co-authored-by: binarybaron <you@domain.com>
831: Bump structopt from 0.3.23 to 0.3.25 r=rishflab a=dependabot[bot]
Bumps [structopt](https://github.com/TeXitoi/structopt) from 0.3.23 to 0.3.25.
<details>
<summary>Changelog</summary>
<p><em>Sourced from <a href="https://github.com/TeXitoi/structopt/blob/master/CHANGELOG.md">structopt's changelog</a>.</em></p>
<blockquote>
<h1>v0.3.25 (2021-10-18)</h1>
<ul>
<li>Fix duplication of aliases in subcommands <a href="https://github-redirect.dependabot.com/TeXitoi/structopt/pull/504">#504</a></li>
</ul>
<h1>v0.3.25 (2021-10-18)</h1>
<ul>
<li>No changes</li>
</ul>
</blockquote>
</details>
<details>
<summary>Commits</summary>
<ul>
<li><a href="da1fff81ad"><code>da1fff8</code></a> v0.3.25</li>
<li><a href="e83b0fcf8a"><code>e83b0fc</code></a> Merge branch 'master' of github.com:TeXitoi/structopt</li>
<li><a href="6dc2963fe6"><code>6dc2963</code></a> v0.4.17</li>
<li><a href="ddb51cb33f"><code>ddb51cb</code></a> Fix duplication of aliases in subcommands</li>
<li><a href="701d6ddbc1"><code>701d6dd</code></a> Remove most <code>ignore</code>s and the <code>should_panic</code> from code blocks in documentation</li>
<li><a href="d30aff1e46"><code>d30aff1</code></a> Improve doc code block formatting</li>
<li><a href="32d6e6dee9"><code>32d6e6d</code></a> Bless Rust <code>1.55</code> test output</li>
<li>See full diff in <a href="https://github.com/TeXitoi/structopt/compare/v0.3.23...v0.3.25">compare view</a></li>
</ul>
</details>
<br />
[](https://docs.github.com/en/github/managing-security-vulnerabilities/about-dependabot-security-updates#about-compatibility-scores)
You can trigger a rebase of this PR by commenting ``@dependabot` rebase`.
[//]: # (dependabot-automerge-start)
[//]: # (dependabot-automerge-end)
---
<details>
<summary>Dependabot commands and options</summary>
<br />
You can trigger Dependabot actions by commenting on this PR:
- ``@dependabot` rebase` will rebase this PR
- ``@dependabot` recreate` will recreate this PR, overwriting any edits that have been made to it
- ``@dependabot` merge` will merge this PR after your CI passes on it
- ``@dependabot` squash and merge` will squash and merge this PR after your CI passes on it
- ``@dependabot` cancel merge` will cancel a previously requested merge and block automerging
- ``@dependabot` reopen` will reopen this PR if it is closed
- ``@dependabot` close` will close this PR and stop Dependabot recreating it. You can achieve the same result by closing it manually
- ``@dependabot` ignore this major version` will close this PR and stop Dependabot creating any more for this major version (unless you reopen the PR or upgrade to it yourself)
- ``@dependabot` ignore this minor version` will close this PR and stop Dependabot creating any more for this minor version (unless you reopen the PR or upgrade to it yourself)
- ``@dependabot` ignore this dependency` will close this PR and stop Dependabot creating any more for this dependency (unless you reopen the PR or upgrade to it yourself)
</details>
833: Bump serde_with from 1.10.0 to 1.11.0 r=rishflab a=dependabot[bot]
Bumps [serde_with](https://github.com/jonasbb/serde_with) from 1.10.0 to 1.11.0.
<details>
<summary>Release notes</summary>
<p><em>Sourced from <a href="https://github.com/jonasbb/serde_with/releases">serde_with's releases</a>.</em></p>
<blockquote>
<h2>serde_with v1.11.0</h2>
<h3>Added</h3>
<ul>
<li>
<p>Serialize bytes as base64 encoded strings.<br />
The character set and padding behavior can be configured.</p>
<pre lang="rust"><code>// Rust
#[serde_as(as = "serde_with::base64::Base64")]
value: Vec<u8>,
#[serde_as(as = "Base64<Bcrypt, Unpadded>")]
bcrypt_unpadded: Vec<u8>,
<p>// JSON
"value": "SGVsbG8gV29ybGQ=",
"bcrypt_unpadded": "QETqZE6eT07wZEO",
</code></pre></p>
</li>
<li>
<p>The minimal supported Rust version (MSRV) is now specified in the <code>Cargo.toml</code> via the <code>rust-version</code> field. The field is supported in Rust 1.56 and has no effect on versions before.</p>
<p>More details: <a href="https://doc.rust-lang.org/nightly/cargo/reference/manifest.html#the-rust-version-field">https://doc.rust-lang.org/nightly/cargo/reference/manifest.html#the-rust-version-field</a></p>
</li>
</ul>
<h3>Fixed</h3>
<ul>
<li>Fixed RUSTSEC-2020-0071 in the <code>time</code> v0.1 dependency, but changing the feature flags of the <code>chrono</code> dependency. This should not change anything. Crates requiring the <code>oldtime</code> feature of <code>chrono</code> can enable it separately.</li>
</ul>
</blockquote>
</details>
<details>
<summary>Commits</summary>
<ul>
<li><a href="0243453497"><code>0243453</code></a> Merge <a href="https://github-redirect.dependabot.com/jonasbb/serde_with/issues/380">#380</a></li>
<li><a href="30ec108368"><code>30ec108</code></a> Bump versions to 1.11.0 and 1.5.1</li>
<li><a href="1733ae56f3"><code>1733ae5</code></a> Merge <a href="https://github-redirect.dependabot.com/jonasbb/serde_with/issues/379">#379</a></li>
<li><a href="7a9dffe26d"><code>7a9dffe</code></a> chrono insecurly uses <code>localtime_r</code></li>
<li><a href="d91731b5f5"><code>d91731b</code></a> Remove default features from chrono to get rid of the oldtime feature</li>
<li><a href="a561ac5c0c"><code>a561ac5</code></a> Merge <a href="https://github-redirect.dependabot.com/jonasbb/serde_with/issues/377">#377</a></li>
<li><a href="69c9303a49"><code>69c9303</code></a> Only pin major version in actions</li>
<li><a href="75bfa5920b"><code>75bfa59</code></a> Merge <a href="https://github-redirect.dependabot.com/jonasbb/serde_with/issues/374">#374</a></li>
<li><a href="40df0508cb"><code>40df050</code></a> Specify the MSRV in the Cargo.toml</li>
<li><a href="bb1c03a9e2"><code>bb1c03a</code></a> Merge <a href="https://github-redirect.dependabot.com/jonasbb/serde_with/issues/373">#373</a></li>
<li>Additional commits viewable in <a href="https://github.com/jonasbb/serde_with/compare/v1.10.0...v1.11.0">compare view</a></li>
</ul>
</details>
<br />
[](https://docs.github.com/en/github/managing-security-vulnerabilities/about-dependabot-security-updates#about-compatibility-scores)
You can trigger a rebase of this PR by commenting ``@dependabot` rebase`.
[//]: # (dependabot-automerge-start)
[//]: # (dependabot-automerge-end)
---
<details>
<summary>Dependabot commands and options</summary>
<br />
You can trigger Dependabot actions by commenting on this PR:
- ``@dependabot` rebase` will rebase this PR
- ``@dependabot` recreate` will recreate this PR, overwriting any edits that have been made to it
- ``@dependabot` merge` will merge this PR after your CI passes on it
- ``@dependabot` squash and merge` will squash and merge this PR after your CI passes on it
- ``@dependabot` cancel merge` will cancel a previously requested merge and block automerging
- ``@dependabot` reopen` will reopen this PR if it is closed
- ``@dependabot` close` will close this PR and stop Dependabot recreating it. You can achieve the same result by closing it manually
- ``@dependabot` ignore this major version` will close this PR and stop Dependabot creating any more for this major version (unless you reopen the PR or upgrade to it yourself)
- ``@dependabot` ignore this minor version` will close this PR and stop Dependabot creating any more for this minor version (unless you reopen the PR or upgrade to it yourself)
- ``@dependabot` ignore this dependency` will close this PR and stop Dependabot creating any more for this dependency (unless you reopen the PR or upgrade to it yourself)
</details>
853: Bump rust_decimal_macros from 1.16.0 to 1.18.0 r=rishflab a=dependabot[bot]
Bumps [rust_decimal_macros](https://github.com/paupino/rust-decimal) from 1.16.0 to 1.18.0.
<details>
<summary>Commits</summary>
<ul>
<li><a href="6766bafb3a"><code>6766baf</code></a> Version 1.18.0 (<a href="https://github-redirect.dependabot.com/paupino/rust-decimal/issues/447">#447</a>)</li>
<li><a href="b4e72bccc0"><code>b4e72bc</code></a> Add MySQL support for Diesel (<a href="https://github-redirect.dependabot.com/paupino/rust-decimal/issues/446">#446</a>)</li>
<li><a href="2f2d0fbe46"><code>2f2d0fb</code></a> Fixes integer handling in Decimal::to_f64 by expanding range (<a href="https://github-redirect.dependabot.com/paupino/rust-decimal/issues/443">#443</a>)</li>
<li><a href="9b6a1cefe0"><code>9b6a1ce</code></a> Add support for Rocket forms (<a href="https://github-redirect.dependabot.com/paupino/rust-decimal/issues/445">#445</a>)</li>
<li><a href="f01dd0c773"><code>f01dd0c</code></a> Version 1.17.0 (<a href="https://github-redirect.dependabot.com/paupino/rust-decimal/issues/442">#442</a>)</li>
<li><a href="d762427801"><code>d762427</code></a> Feature: Retain excess precision during float conversions (<a href="https://github-redirect.dependabot.com/paupino/rust-decimal/issues/441">#441</a>)</li>
<li><a href="5ff1538b5a"><code>5ff1538</code></a> Fixes significant figure calcs for small numbers (<a href="https://github-redirect.dependabot.com/paupino/rust-decimal/issues/440">#440</a>)</li>
<li><a href="980c98704a"><code>980c987</code></a> Auto rounding of scales 29, 30 and 31 for deserialization (<a href="https://github-redirect.dependabot.com/paupino/rust-decimal/issues/436">#436</a>)</li>
<li><a href="67c29ef307"><code>67c29ef</code></a> Fixes issue with mantissa sf calculation (<a href="https://github-redirect.dependabot.com/paupino/rust-decimal/issues/434">#434</a>)</li>
<li><a href="c74bd40701"><code>c74bd40</code></a> Fixes Display Overflow issue when using precision greater than 30 (<a href="https://github-redirect.dependabot.com/paupino/rust-decimal/issues/433">#433</a>)</li>
<li>See full diff in <a href="https://github.com/paupino/rust-decimal/compare/1.16.0...1.18.0">compare view</a></li>
</ul>
</details>
<br />
[](https://docs.github.com/en/github/managing-security-vulnerabilities/about-dependabot-security-updates#about-compatibility-scores)
You can trigger a rebase of this PR by commenting ``@dependabot` rebase`.
[//]: # (dependabot-automerge-start)
[//]: # (dependabot-automerge-end)
---
<details>
<summary>Dependabot commands and options</summary>
<br />
You can trigger Dependabot actions by commenting on this PR:
- ``@dependabot` rebase` will rebase this PR
- ``@dependabot` recreate` will recreate this PR, overwriting any edits that have been made to it
- ``@dependabot` merge` will merge this PR after your CI passes on it
- ``@dependabot` squash and merge` will squash and merge this PR after your CI passes on it
- ``@dependabot` cancel merge` will cancel a previously requested merge and block automerging
- ``@dependabot` reopen` will reopen this PR if it is closed
- ``@dependabot` close` will close this PR and stop Dependabot recreating it. You can achieve the same result by closing it manually
- ``@dependabot` ignore this major version` will close this PR and stop Dependabot creating any more for this major version (unless you reopen the PR or upgrade to it yourself)
- ``@dependabot` ignore this minor version` will close this PR and stop Dependabot creating any more for this minor version (unless you reopen the PR or upgrade to it yourself)
- ``@dependabot` ignore this dependency` will close this PR and stop Dependabot creating any more for this dependency (unless you reopen the PR or upgrade to it yourself)
</details>
861: Bump thomaseizinger/create-pull-request from 1.2.1 to 1.2.2 r=rishflab a=dependabot[bot]
Bumps [thomaseizinger/create-pull-request](https://github.com/thomaseizinger/create-pull-request) from 1.2.1 to 1.2.2.
<details>
<summary>Commits</summary>
<ul>
<li><a href="ed928d9a28"><code>ed928d9</code></a> Merge pull request <a href="https://github-redirect.dependabot.com/thomaseizinger/create-pull-request/issues/174">#174</a> from uluzox/master</li>
<li><a href="c12554b15f"><code>c12554b</code></a> add input 'repository'</li>
<li><a href="843eecc34a"><code>843eecc</code></a> Merge pull request <a href="https://github-redirect.dependabot.com/thomaseizinger/create-pull-request/issues/164">#164</a> from thomaseizinger/dependabot/npm_and_yarn/tar-4.4.19</li>
<li><a href="96bcc576df"><code>96bcc57</code></a> Bump tar from 4.4.15 to 4.4.19</li>
<li><a href="330dc75f44"><code>330dc75</code></a> Merge pull request <a href="https://github-redirect.dependabot.com/thomaseizinger/create-pull-request/issues/157">#157</a> from thomaseizinger/dependabot/npm_and_yarn/path-pars...</li>
<li><a href="6e35354371"><code>6e35354</code></a> Bump path-parse from 1.0.6 to 1.0.7</li>
<li><a href="133e95ec62"><code>133e95e</code></a> Merge pull request <a href="https://github-redirect.dependabot.com/thomaseizinger/create-pull-request/issues/151">#151</a> from thomaseizinger/dependabot/npm_and_yarn/node-fetc...</li>
<li><a href="900803c415"><code>900803c</code></a> Bump node-fetch from 2.6.0 to 2.6.1</li>
<li><a href="56ebc6093e"><code>56ebc60</code></a> Merge pull request <a href="https://github-redirect.dependabot.com/thomaseizinger/create-pull-request/issues/145">#145</a> from thomaseizinger/remove-eslint</li>
<li><a href="4a98166d2b"><code>4a98166</code></a> Run build script</li>
<li>Additional commits viewable in <a href="https://github.com/thomaseizinger/create-pull-request/compare/1.2.1...1.2.2">compare view</a></li>
</ul>
</details>
<br />
[](https://docs.github.com/en/github/managing-security-vulnerabilities/about-dependabot-security-updates#about-compatibility-scores)
You can trigger a rebase of this PR by commenting ``@dependabot` rebase`.
[//]: # (dependabot-automerge-start)
[//]: # (dependabot-automerge-end)
---
<details>
<summary>Dependabot commands and options</summary>
<br />
You can trigger Dependabot actions by commenting on this PR:
- ``@dependabot` rebase` will rebase this PR
- ``@dependabot` recreate` will recreate this PR, overwriting any edits that have been made to it
- ``@dependabot` merge` will merge this PR after your CI passes on it
- ``@dependabot` squash and merge` will squash and merge this PR after your CI passes on it
- ``@dependabot` cancel merge` will cancel a previously requested merge and block automerging
- ``@dependabot` reopen` will reopen this PR if it is closed
- ``@dependabot` close` will close this PR and stop Dependabot recreating it. You can achieve the same result by closing it manually
- ``@dependabot` ignore this major version` will close this PR and stop Dependabot creating any more for this major version (unless you reopen the PR or upgrade to it yourself)
- ``@dependabot` ignore this minor version` will close this PR and stop Dependabot creating any more for this minor version (unless you reopen the PR or upgrade to it yourself)
- ``@dependabot` ignore this dependency` will close this PR and stop Dependabot creating any more for this dependency (unless you reopen the PR or upgrade to it yourself)
</details>
866: Fix electrum query failing (CloseNotify bug) r=rishflab a=devbordecraft
Retry query the electrum server if it fail. This address #797
874: Bump async-trait from 0.1.51 to 0.1.52 r=rishflab a=dependabot[bot]
Bumps [async-trait](https://github.com/dtolnay/async-trait) from 0.1.51 to 0.1.52.
<details>
<summary>Release notes</summary>
<p><em>Sourced from <a href="https://github.com/dtolnay/async-trait/releases">async-trait's releases</a>.</em></p>
<blockquote>
<h2>0.1.52</h2>
<ul>
<li>Eliminate <code>clippy::shadow_some</code> restriction lint from generated code (<a href="https://github-redirect.dependabot.com/dtolnay/async-trait/issues/184">#184</a>, thanks <a href="https://github.com/c410-f3r"><code>`@c410-f3r</code></a>)</li>`
</ul>
</blockquote>
</details>
<details>
<summary>Commits</summary>
<ul>
<li><a href="20bd296e0d"><code>20bd296</code></a> Release 0.1.52</li>
<li><a href="076b7303ab"><code>076b730</code></a> Touch up PR 184</li>
<li><a href="9c42e3d90d"><code>9c42e3d</code></a> Merge pull request <a href="https://github-redirect.dependabot.com/dtolnay/async-trait/issues/184">#184</a> from c410-f3r/clippy</li>
<li><a href="7f0d4b6488"><code>7f0d4b6</code></a> Format PR 184 with rustfmt</li>
<li><a href="572f7e95f4"><code>572f7e9</code></a> Sort lint_suppress_with_body</li>
<li><a href="5629db9678"><code>5629db9</code></a> Fix <code>clippy::shadow_same</code> warning</li>
<li><a href="c5de48ef87"><code>c5de48e</code></a> Update ui test suite to nightly-2021-11-26</li>
<li><a href="7080dc8c99"><code>7080dc8</code></a> Raise minimum tested version to rustc 1.45</li>
<li><a href="278abc7ab4"><code>278abc7</code></a> Install newest build of cargo-outdated</li>
<li><a href="1ab566d3e7"><code>1ab566d</code></a> Remove noisy warnings from unreachable ui test</li>
<li>Additional commits viewable in <a href="https://github.com/dtolnay/async-trait/compare/0.1.51...0.1.52">compare view</a></li>
</ul>
</details>
<br />
[](https://docs.github.com/en/github/managing-security-vulnerabilities/about-dependabot-security-updates#about-compatibility-scores)
You can trigger a rebase of this PR by commenting ``@dependabot` rebase`.
[//]: # (dependabot-automerge-start)
[//]: # (dependabot-automerge-end)
---
<details>
<summary>Dependabot commands and options</summary>
<br />
You can trigger Dependabot actions by commenting on this PR:
- ``@dependabot` rebase` will rebase this PR
- ``@dependabot` recreate` will recreate this PR, overwriting any edits that have been made to it
- ``@dependabot` merge` will merge this PR after your CI passes on it
- ``@dependabot` squash and merge` will squash and merge this PR after your CI passes on it
- ``@dependabot` cancel merge` will cancel a previously requested merge and block automerging
- ``@dependabot` reopen` will reopen this PR if it is closed
- ``@dependabot` close` will close this PR and stop Dependabot recreating it. You can achieve the same result by closing it manually
- ``@dependabot` ignore this major version` will close this PR and stop Dependabot creating any more for this major version (unless you reopen the PR or upgrade to it yourself)
- ``@dependabot` ignore this minor version` will close this PR and stop Dependabot creating any more for this minor version (unless you reopen the PR or upgrade to it yourself)
- ``@dependabot` ignore this dependency` will close this PR and stop Dependabot creating any more for this dependency (unless you reopen the PR or upgrade to it yourself)
</details>
Co-authored-by: dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com>
Co-authored-by: devbordecraft <devbordecraft>
This allows manual recovery of problems like https://github.com/comit-network/xmr-btc-swap/issues/537
Since we could not figure out what causes this issue, and it is most likely an upstream problem this is the best we can do so far to allow the user to manually interact with `monero-wallet-cli` or `monero-wallet-rpc`.
807: Bump pem from 0.8.3 to 1.0.0 r=rishflab a=dependabot[bot]
Bumps [pem](https://github.com/jcreekmore/pem-rs) from 0.8.3 to 1.0.0.
<details>
<summary>Changelog</summary>
<p><em>Sourced from <a href="https://github.com/jcreekmore/pem-rs/blob/master/CHANGELOG.md">pem's changelog</a>.</em></p>
<blockquote>
<h1>1.0</h1>
<ul>
<li><code>pem::parse_many</code> now returns a <code>Result<Vec<Pem>></code> instead of a <code>Vec<Pem></code> that silently discarded invalid sections.</li>
</ul>
</blockquote>
</details>
<details>
<summary>Commits</summary>
<ul>
<li><a href="15b1f99fb6"><code>15b1f99</code></a> (cargo-release) version 1.0.0</li>
<li><a href="765968bfab"><code>765968b</code></a> update changelog for 1.0 release</li>
<li><a href="9206bed247"><code>9206bed</code></a> Merge pull request <a href="https://github-redirect.dependabot.com/jcreekmore/pem-rs/issues/28">#28</a> from mhils/parse-many</li>
<li><a href="e44bef628a"><code>e44bef6</code></a> add CHANGELOG</li>
<li><a href="936da99794"><code>936da99</code></a> make <code>parse_many</code> return a <code>Result\<Vec<Pem>></code></li>
<li><a href="b2cfec1848"><code>b2cfec1</code></a> (cargo-release) start next development iteration 0.8.4-alpha.0</li>
<li>See full diff in <a href="https://github.com/jcreekmore/pem-rs/compare/v0.8.3...v1.0.0">compare view</a></li>
</ul>
</details>
<br />
[](https://docs.github.com/en/github/managing-security-vulnerabilities/about-dependabot-security-updates#about-compatibility-scores)
You can trigger a rebase of this PR by commenting ``@dependabot` rebase`.
[//]: # (dependabot-automerge-start)
[//]: # (dependabot-automerge-end)
---
<details>
<summary>Dependabot commands and options</summary>
<br />
You can trigger Dependabot actions by commenting on this PR:
- ``@dependabot` rebase` will rebase this PR
- ``@dependabot` recreate` will recreate this PR, overwriting any edits that have been made to it
- ``@dependabot` merge` will merge this PR after your CI passes on it
- ``@dependabot` squash and merge` will squash and merge this PR after your CI passes on it
- ``@dependabot` cancel merge` will cancel a previously requested merge and block automerging
- ``@dependabot` reopen` will reopen this PR if it is closed
- ``@dependabot` close` will close this PR and stop Dependabot recreating it. You can achieve the same result by closing it manually
- ``@dependabot` ignore this major version` will close this PR and stop Dependabot creating any more for this major version (unless you reopen the PR or upgrade to it yourself)
- ``@dependabot` ignore this minor version` will close this PR and stop Dependabot creating any more for this minor version (unless you reopen the PR or upgrade to it yourself)
- ``@dependabot` ignore this dependency` will close this PR and stop Dependabot creating any more for this dependency (unless you reopen the PR or upgrade to it yourself)
</details>
Co-authored-by: dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com>
805: Remove unused command line argument from the balance command r=rishflab a=rishflab
The target block is irrelevant when calculating the balance.
Closes#793
Co-authored-by: rishflab <rishflab@hotmail.com>
806: Upgrade bitcoin and bdk to latest version r=rishflab a=thomaseizinger
The latest version allows us to access `miniscript` via `bdk` which
removes the need for declaring it as an extra dependency.
Co-authored-by: Thomas Eizinger <thomas@eizinger.io>
dependabot[bot]