Previously logs were only timestamped when the ASB was run in an
interactive terminal or if the logs were output as JSON. JSON logs and
ASB output in an interactive terminal are no longer timestamped by
default.
Remove the force flag. There is a resume command that tries to
gracefully restarts the protocol and tries to execute the happy path.
Remove e2e tests which test the --force flag.
724: Handle errors when waiting for subscriptions r=rishflab a=rishflab
We were not thorough enough in PR #705 and there were some remaining
unhandled errors.
Co-authored-by: rishflab <rishflab@hotmail.com>
704: Allow withdrawing and viewing of the bitcoin balance on swap-cli r=rishflab a=devbordecraft
Same mechanics of the ASB but on swap-cli as discussed in #694
Co-authored-by: devbordecraft <devbordecraft>
Previously, we relied on the wallet in the `monero-wallet-rpc` daemon
to be loaded as we do on startup. As a consequence of this expectation,
restarting `monero-wallet-rpc` to fix bugs like #652 resulted in the
ASB no longer operating correctly.
To fix this, we now load the wallet on-demand in case the daemon responds
with the error code -13.
Ideally, we would implement this behaviour generically using the proxy
pattern on the `MoneroWalletRpc` trait. Unfortunately, when attempting
to do so we uncover a limitation in the design of `jsonrpc_client`.
This limitation is tracked in https://github.com/thomaseizinger/rust-jsonrpc-client/issues/47.
Once fixed, we can implement this logic in a more robust way that is not
tied to the `check_tx_key` RPC call but applies to any RPC call automatically.
Instead of splitting up the transports into capabilities, we compose
them directly for each application. This allows us to remove the
websocket transport for the CLI which is really only needed for the
ASB to allow retrieval of quotes via the browser.
Adds the ping behaviour to both ASB and CLI behaviour that periodically pings a connected party to ensure that the underlying network connection is still alive.
This fixes problems with long-running connections that become dead without a connection closure being reported back to the swarm.
This improves the error handling on the ASB.
Once the Bitcoin redeem transaction is seen in mempool, the state machine cannot transition to a cancel scenario anymore because at that point the CLI will have redeemed the Monero.
The additional state then waits for transaction finality.
In order to allow people to plug into public nodes / be more flexible with their own setup we now enforce specifying the monero daemon port to be used by the `monero-wallet-rpc`.
Introduces a minimum buy Bitcoin amount similar to the maximum amount already present.
For the CLI the minimum amount is enforced by waiting until at least the minimum is available as max-giveable amount.
Max-buy and spread is not something that one would configure on every run.
More convenient to keep this in the config.
The max-buy Bitcoin value was adapted to `0.02` which is more reasonable for mainnet.
Activated feature `serde-float` to serialize the spread (Decimal) as float instead of string.
```
...
[maker]
max_buy_btc = 0.02
ask_spread = 0.02
```
Adds `cancel`, `refund`, `punish`, `redeem` and `safely-abort` commands to the ASB that can be used to trigger the specific scenario for the swap by ID.
When a CLI requests a spot price have some errors that are expected, where we can provide a proper error message for the CLI:
- Balance of ASB too low
- Buy amount sent by CLI exceeds maximum buy amount accepted by ASB
- ASB is running in maintenance mode and does not accept incoming swap requests
All of these errors returns a proper error to the CLI and prints a warning in the ASB logs.
Any other unexpected error will result in closing the channel with the CLI and printing an error in the ASB logs.
Resume-only is a maintenance mode where no swaps are accepted but unfinished swaps are resumed.
This is achieve by ignoring incoming spot-price requests (that would lead to execution setup) in the event-loop.
Using the same default directory as data-/config-dir has caused unwanted side effects when running both applications on the same machine.
Use these directory names:
- ASB: xmr-btc-swap/asb
- CLI: xmr-btc-swap/cli
Since the functionality is now application specific the respective functions were moved into the appropriate module of the application.
Using the same default directory as data-/config-dir has caused unwanted side effects when running both applications on the same machine.
Use these directory names:
- ASB: xmr-btc-swap-asb
- CLI: xmr-btc-swap-cli
Since the functionality is now application specific the respective functions were moved into the appropriate module of the application.
This PR does a few things.
* It adds a TorTransport which either dials through Tor's socks5 proxy or via clearnet.
* It enables ASB to register hidden services for each network it is listening on. We assume that we only care about different ports and re-use the same onion-address for all of them. The ASB requires to have access to Tor's control port.
* It adds support to dial through a local Tor socks5 proxy. We assume that Tor is always available on localhost. Swap cli only requires Tor to be running so that it can send messages via Tor's socks5 proxy.
* It adds a new e2e test which swaps through Tor. For this we assume that Tor is currently running on localhost. All other tests are running via clear net.
A `RequestResponseCodec` for pull-based protocols where the response is encoded using JSON.
This was added to more properly express the behavior of the quote protocol, where the dialer
doesn't send any message and expects the listener to directly send the response.
Co-authored-by: Thomas Eizinger <thomas@eizinger.io>
- Listen on both tcp and websockets as default
- Listening addresses in config as array
- Configure fallback transport using `or_transport` - if listening on a given address fails on WS, we fall back to TCP.
- Swap-id is exchanged during execution setup. CLI (Bob) sends the swap-id to be used in his first message.
- Transfer poof and encryption signature messages include the swap-id so it can be properly associated with the correct swap.
- ASB: Encryption signatures are associated with swaps by swap-id, not peer-id.
- ASB: Transfer proofs are still associated to peer-ids (because they have to be sent to the respective peer), but the ASB can buffer multiple
- CLI: Incoming transfer proofs are checked for matching swap-id. If a transfer proof with a different swap-id than the current executing swap is received it will be ignored. We can change this to saving into the database.
Includes concurrent swap tests with the same Bob.
- One test that pauses and starts an additional swap after the transfer proof was received. Results in both swaps being redeemed after resuming the first swap.
- One test that pauses and starts an additional swap before the transfer proof is sent (just after BTC locked). Results in the second swap redeeming and the first swap being refunded (because the transfer proof on Bob's side is lost). Once we store transfer proofs that we receive during executing a different swap into the database both swaps should redeem.
Note that the monero harness was adapted to allow creating wallets with multiple outputs, which is needed for Alice.
376: ASB resumes unfinished swaps after startup r=da-kami a=da-kami
Fixes#374
- [x] Save Bob peer-id in database for Alice
- [x] Alice: Wait for `10` Monero confirmations in `BtcRefunded` instead of `XmrLocked` (requires extending the RPC to distinguish locked / unlocked balance)
- [x] Save Alice peer-id in database for Bob ~~(+ multiaddress and remove params from resume)~~
- [ ] ~~Refactor Bob in test setup (handle event-loop in test setup similar to Alice)~~
I decided against refactoring Bob in the test setup, because eventually we might still want to add concurrent swap tests with multiple Bobs. The refactoring I had in mind would not allow such kind of tests.
Generally, the current state of the changes already contains enough added value to open the PR :)
Follow ups out of scope
- [ ] Parametrize database with role (Alice / Bob) and remove all the (currently useless) mapping between DB and protocol types.
- [ ] Alice: Wait for transfer proof ack before transitioning to new `XmrLocked`
Co-authored-by: Daniel Karzel <daniel@comit.network>
This allows loading the seller-peer-id from the database upon resuming a swap.
Thus, the parameters `--seller-peer-id` is removed for the `resume` command.
Other than the peer-id the multi address of a seller can change and thus is
still a parameter. This parameter might become optional once we add DHT support.
In order for the re-construction of TxLock to be meaningful, we limit
`Message2` to the PSBT instead of the full struct. This is a breaking
change in the network layer.
The PSBT is valid if:
- It has at most two outputs (we allow a change output)
- One of the outputs pays the agreed upon amount to a shared output script
Resolves#260.
Our strategy of searching for a english string to determine if
monero_wallet_rpc is ready is not compatible with languages other than
english. Instead we assume the monero rpc is ready if it has stopped
writing to stdout. We make a json rpc request to confirm this. A better
solution would have been to configure the monero_wallet_rpc to always
output in english but there is not command line argument to configure
the language.
Closes#353.
