The bitcoind wallet required the user to run a bitcoind node. It was replaced with a bdk wallet which allows the user to connect to an electrum instance hosted remotely. An electrum and bitcoind testcontainer were created to the test the bdk wallet. The electrum container reads the blockdata from the bitcoind testcontainer through a shared volume. bitcoind-harness was removed as bitcoind initialisation code was moved into test_utils. The bdk wallet differs from the bitcoind wallet in that it needs to be manually synced with an electrum node. We synchronise the wallet once upon initialisation to prevent a potentially long running blocking task from interrupting protocol execution. The electrum HTTP API was used to get the latest block height and the transaction block height as this functionality was not present in the bdk wallet API or it required the bdk wallet to be re-synced to get an up to date value.
190: Do not pass Monero amount to the CLI r=D4nte a=D4nte
The CLI user only pass the Bitcoin amount they want to sell.
The CLI then do a quote request to nectar which provides the Monero amount the taker can get.
Co-authored-by: Franck Royer <franck@coblox.tech>
188: Tor cleanup r=da-kami a=da-kami
We never removed Tor install from CI. I don't think it should be necessary given that Tor was removed in code.
Co-authored-by: Daniel Karzel <daniel@comit.network>
To allow the related timelock to be defined with the
transaction that uses it. This will allow the access to the
timelock's struct inner field with defining `From` impl.
Hence, reducing complexity of the codebase. Note that the seed will be
used by both nectar and the cli whereas the config mod will be different
so this changes helps with the next step of having a dedicated config
module for each binary.
The punish test needs re-work due to the fact that Alice runs continuously
Currently focusing on the CLI (Bob), so we can re-introduce this test
once we want to ensure that nectar (Alice) punishes.
The test do not work without acks as we stop the event loop as soon
as a message is considered as "sent" when actually the event loop
and swarm may not have yet sent the message.
The ack allow to avoid this issue as the message was considered "sent"
only once the other party sent a response. However, the ack brings
other issue so a review needs to be done to select the appropriate
solution.
We are aware of issues of timeouts when waiting for acknowledgements.
Also, to properly supports acks in a multiple swap context, we need to
revert to doing event processing on the behaviour so that we can link
leverage the `RequestResponse` libp2p behaviour and link the messages
requests ids to swap ids when receiving an ack or response.
Acks are usefully for specific scenarios where we queue a message on the
behaviour to be sent, save as sent in the DB but crash before the
message is actually sent. With acks we are able to resume the swap,
without ack, the swap will abort (refund).
`alice::swap::run_until` will be called once the execution setup is
done. The steps before are directly handled by the event loop,
hence no channels are needed for said steps: connection established,
swap request/response & execution setup.
The `EventLoop` will use the `Builder` interface to instantiate a
`Swap` upon receiving a `SwapRequest` and successfully doing an
execution setup.
Before this change, the `EventLoop` would have to hold the path to the
db and re-open the db everytime it wants to construct a swap.
With this change, we can open the DB once and then hold a
`Arc<Database>` in the `EventLoop` and pass it to new `Swap`s structs.
This was introduced due to a CI run, where Bob included tx_refund, but Alice had waited until T2 had expired,
and then went for punishing Bob instead of refunding.
Weirdly, Alice's punich transaction did not fail in that scenario.
If dialing Bob fails Alice waits for the acknowledgement of the transfer proof indefinitely.
The timout prevents her execution from hanging.
Added a ToDo to re-visit the ack receivers. They don't add value at the moment and should be removed.
Alice was attempting to create a new event loop using the same listen addr as the old one which was still running. This commit aborts the event loop before creating a new one.
Upgrade bitcoin harness dependency to latest commit
Upgrade backoff to fix failing tests. The previous version of backoff had a broken version of the retry function. Upgraded to a newer comit which fixes this problem.
Upgrade hyper to 0.14 as the 0.13 was bringing in tokio 0.2.24
Upgraded bitcoin harness to version that uses tokio 1.0 and reqwest 0.11
Upgrade reqwest to 0.11. Reqwest 0.11 uses tokio 1.0
Upgrade libp2p to 0.34 in preparation for tokio 1.0 upgrade
As per the proposed changed in the sequence diagram.
The aim is to have a unique terminology per message instead of having
the same name for 2 consequent messages that share the same behaviour.
Note that the aim is to remove the shared `RequestResponse` behaviours.
Rust fmt automatically groups the imports (from top to bottom) as `pub use` `use crate` and `use`.
There is no need to introduce sections which cause annoyance when auto importing using the IDE.
149: Fix Alice redeem scenario r=da-kami a=da-kami
Follow up of #144, partial fix of https://github.com/comit-network/xmr-btc-swap/issues/137
Fix Alice redeem scenario
- Properly check the timelocks before trying to redeem
- Distinguish different failure scenarios and reactions to it.
- if we fail to construct the redeem transaction: wait for cancel.
- if we fail to publish the redeem transaction: wait for cancel but let the user know that restarting the application will result in retrying to publish the tx.
- if we succeed to publish the tx but then fail when waiting for finality, print error to the user (secreat already leaked, the user has to check manually if the tx was included)
Co-authored-by: Daniel Karzel <daniel@comit.network>
- Properly check the timelocks before trying to redeem
- Distinguish different failure scenarios and reactions to it.
- if we fail to construct the redeem transaction: wait for cancel.
- if we fail to publish the redeem transaction: wait for cancel but let the user know that restarting the application will result in retrying to publish the tx.
- if we succeed to publish the tx but then fail when waiting for finality, print error to the user (secreat already leaked, the user has to check manually if the tx was included)
This is not really a factory as a factory design pattern is about
producing several instances.
In the current usage, we are only interested in one swap instance. Once
the swap instance is created, the factory becomes useless. Hence, it is
more of a builder pattern.
Currently this code is actually not reachable, but that is semantically applied by the program's flow (the resume command includes the swap direction).
It is still preferred to have an error message rather than an unreachable statement.
- Introduce Test abstraction instead of tow harnesses, move test specific data into Test
- Change the abstraction from actors to swap, because we are creating swaps, not actors
- rename actor::swap to run, because we are running a swap
145: Make lock-tx id available in redeem/punish state to be able to assert exact fees r=da-kami a=da-kami
We can do exact assertions for Bob's redeem as well, but have to store Bob's tx_lock id in the respective final state. Make tx_lock available in BtcRedeemed and BtcPunished to have better assertions / harmonize test behaviour.
Storing this information is strictly speaking not needed for the production environment. But it is static information that can be seen as additional information that can be handy for a user. We could potentially extract it inside the tests as well (for redeem without restart would be a bit tricky), but I think this solution is more elegant.
Co-authored-by: Daniel Karzel <daniel@comit.network>
Co-authored-by: Franck Royer <franck@coblox.tech>
Co-authored-by: bors[bot] <26634292+bors[bot]@users.noreply.github.com>
144: Test refactor r=da-kami a=da-kami
This PR is pure refactoring, keeping the logic of the tests we had before. No production code is touched besides re-exports in early commits (no logic changes).
In the follow ups improvements will be introduced, that touch the production code as well.
All remaining tasks actioned since Friday:
- [x] `happy_path_bob _restart` (trivial)
- [x] add refund assertions to harnesses (trivial)
- [x] convert all refund scenarios currently being tested (trivial)
- [x] remove dead test init code once all old tests are converted
- [ ] ~~(optional) move alice and bob harness code into separate files~~ -> might action this once re-using test code in production.
Out of scope, follow up:
- [x] https://github.com/comit-network/xmr-btc-swap/pull/145 - We can do exact assertions for Bob's redeem as well, but have to store Bob's `tx_lock` id in the respective final state. Make `tx_lock` available in `BtcRedeemed` and `BtcPunished` to have better assertions / harmonize test behaviour.
- [ ] update the production code to use the `Alice` and `Bob` structs to bundle the params - update tests to use the production struct.
- [ ] Re-use test swap setup in production (i.e. `Alice-/BobHarness::new`) to setup the swap.
- [ ] add additional tests
- [ ] re-try moving the tests from `test` to `src` (if the peer_id was the only problem this should be trivial now - but should be done after the refactor is finished)
- [ ] creating new wallets upon restart
- [ ] aborting the old event loop after restart
Co-authored-by: rishflab <rishflab@hotmail.com>
Co-authored-by: Daniel Karzel <daniel@comit.network>
136: Testnet resume fixes r=da-kami a=da-kami
Add a few log statements on Bob's side to make the user experience better.
Update / remove ToDos.
I set the log level to `Info` in main again, `Debug` heavily clutters the output. In order to make `Debug` more usable we might want to review printing all those `rpc` messages. But this goes beyond the scope of this PR.
Co-authored-by: Daniel Karzel <daniel@comit.network>
This makes the redeem assertion reusable for all tests with a redeem scenario.
Since the factory was not a clean factory before and is now doing even more it was renamed to harness.
If we wait for lock transaction confirmations immediately after sending the transaction without saving this state to the DB this might cause locking the money twice.
An additional state is needed for such a scenario.
This includes the introduction of the --data-dir parameter instead of the --database.
Both the seed file and the database are stored in the data-dir, the database in sub-folder `database`.
We already select waiting for this message with the cancellation expiry,
we do not need add another guard that tries to guess how long it would
for the Monero transaction to be finalised.
Created network, storage and protocol modules. Organised
files into the modules where the belong.
xmr_btc crate moved into isolated modulein swap crate.
Remove the xmr_btc module and integrate into swap crate.
Consolidate message related code
Reorganise imports
Remove unused parent Message enum
Remove unused parent State enum
Remove unused dependencies from Cargo.toml
We have overridden a number of clippy warnings such as
"large enum variant".
Considering that we have a number of issues
with the stack size in CI, it is more prudent to follow clippy's advice
and box larger items so that the enum does not take larger space.
Do note that an instance of the enum always takes as much space as its
largest variant.
There are no refund timelock, only a cancellation timelock and punish
timelock.
Refund can be done as soon as the cancellation transaction is published.
107: Ensure that Bob can cancel correctly if T1 expired and Alice did not … r=da-kami a=da-kami
Bob has to check for the possibility to cancel in every state after he locked the BTC.
Otherwise Bob will try to perform actions that don't have any point and it might be impossible to use the `resume` command because it will always fail in trying to go on with Alice even though that might not be possible.
Co-authored-by: Daniel Karzel <daniel@comit.network>
Bob has to check for the possibility to cancel in every state after he locked the BTC.
Otherwise Bob will try to perform actions that don't have any point.
As Bob is dialing Alice, we now ensure that we are connected to Alice
at each step that needs communication.
If we are not connected, we proceed with dialing.
In an attempt to improve libp2p usage, we also add known address of
Alice first and only use peer_id to dial.
This ensures that we use the expected peer id.
98: Remove tor module r=da-kami a=da-kami
This removes the currently unused `tor module`.
Different `tokio` versions have been causing issues with the `tor` module in the past (i.e. `Cargo.lock` broken problem...). It started causing issues again when adding a dependency to `jsonrpc_client` working on https://github.com/comit-network/xmr-btc-swap/pull/97
We don't support `tor` at the moment and are no planning to add this feature initially as it is not super important to users.
The functionality can easily added again at a later point.
Co-authored-by: Daniel Karzel <daniel@comit.network>
This module was intended to contain helper functions for each step.
However, those are not needed except for the negotiate step.
A dedicated module is not needed for one function.
The usage of the peer id is incorrect as we do not even check it when
dialing. For now, we can ignore it.
We can then re-introduce it and use it properly at a later stage.
Reworked Alice XmrLocked state transition handler to handle the
scenario when Alice received the encsig but Bob refunds.
Previously Alice was trying to redeem after receiving the encsig
without checking if t1 had elapsed.
Previously state0 had to be set after creating Alice's behaviour.
With the event loop we no longer has access to the swarm so
set_state0() has to be called indirectly through a channel. This
means it is difficult to guarantee state0 is being set due to the
asynchronous nature of channels. This was solved by initialising
Alice with state0.
Previously the libp2p swarm had to be manually polled within the
protocol execution code to execute actions such as sending a
message. The swarm is now wrapped in SwarmDriver which polls the
swarm in a seperate task
Tracing should be initialized by test and the `_guard` kept alive within the test.
Re-using this code in different tests does not really have any additional value.
Instead of specifying what messages we want to include, I went for a filter that excludes noise.
That way we get more useful logging.
Use reusable test init functions for happy path test
Extract tracing setup to reusable function
Move test initialization to seperate functions
Increase stack size in CI
Fix monero max finality time
Force Bob swarm polling to send message 2
Run Bob state to xmr_locked in punish test to force the sending of
message2. Previously Bob state was run until btc_locked. Although
this was the right thing to do, message2 was not being sent as the
swarm was not polled in btc_locked. Alice punish test passes.
Add info logging to executor
Move state machine executors into seperate files
Remove check for ack message from Alice. Seems like a bad idea to
rely on an acknowledgement message instead of looking at the
blockchain.
Fix warnings
Consolidate and simplify swap execution. Generators are no longer
needed. Consolidate recovery and swap data structures. The
recursive calls can be replaced with a loop if returning prior to
completion is desired for testing purposes.
Fill out alice abort path
Move state machine executors into seperate files
Not compiling due to recursion/async issues
Fix async recursion compilation errors
Fix Bob swap execution
Remove check for ack message from Alice. Seems like a bad idea to
rely on an acknowledgement message instead of looking at the
blockchain.
Fix Bob abort
Fix warnings
Xmr lock complete
Add TxCancel submit to XmrLocked
Bob swap completed
Remove alice
This introduces a lot of duplication between the binary and the
library, but it's okay because this module should only be a temporary
measure until we allow recovery to be handled by the original state
machine.
Also, fix a bug in `xmr_btc::alice::action_generator` caused by the
incorrect assumption that Alice's ability to punish Bob could be
determined before the cancel transaction hits the blockchain.
The numerous tor conditional compile flags were removed by
extracting transport creation to the main statement. A tor
transport is created if Alice specifies a tor port using the CLI.
The hardcoded configuration was replaced with CLI
configuration options. CLI based config was chosen
over a config file as it does not access and clutter
the user's file system. By CLI options depend on whether
the program is run in Alice or Bob mode.
Before this patch Bob is not sending message 3. This is because we are not
polling Bob's swarm correctly. To fix it we can just mimic the other NB's and
bubble up an event when Bob receives message 3 response from Alice, this way we
can `await` upon this event which triggers polling, making Bob's swarm send the
message.
Also use cosntant backoff retry strategy as opposed to exponential
backoff. This is in case retrying several times quickly causes the
retry intervals to become large enough that the test is very slow
and/or the Bitcoin lock transaction expires.
The current problem occurs on the last message i.e. Bob sending
tx_redeem_encsig to Alice. The action is yielded for Bob to do it, but
Alice appears to never receive it (unconfirmed claim, requires more
logging).
Unfortunately, I had to put the wrap the swarm in Alice's `Network`
struct in an `Arc<Mutex<T>>` in order to be able to use `backoff` to
control the retry mechanism. This is because the stream of events
cannot be turned into a `SharedFuture` (unlike Bob's).
It would be good to find an alternative solution.
Alice does not respond with anything when receiving message 2 from Bob. We don't
want to leave Bob's request/response protocol waiting so send an empty response
back.
It looks like the compiler can ascertain that `message0` will be
initialised by the time we use it, so it doesn't need to be an
`Option` and it doesn't need to be declared as mutable.
In order for Alice to complete the handshake she needs to transition to state 3,
for this she needs message 2 from Bob.
Send `bob::Message2` to Alice and transition to `State3` - completing the
handshake.
Anything that needs to be re-exported by this crate from
`curve25519_dalek` can be re-exported from the `monero` module. In
fact, the `Scalar` type was already being re-exported.
We model the getting of amounts as a network behaviour even though conceptually
it is a protocol. Refine/refactor the code a bit to make this more obvious.
- Use `Amounts` instead of `Messenger`
We only ever connect to a single peer, update peer tracker to reflect this. This
is a single patch because the handling of the two network behaviours is a
intertwined.
- Only track one peer connection
- Track the peer id and the multiaddr of the counterparty
- Emit an event for connection established on Alice's side as well as Bob's side
Add a binary crate `swap` that implements two nodes (Alice and Bob). With this
applied we can start up a node for each role and do:
- Bob: Requests current amounts using BTC is input
- Alice: Responds with amounts
- Bob: (mock) get user input to Ok the amounts
... continue with swap (TODO)
