mirror of
https://gitlab.com/veilid/veilid.git
synced 2024-12-27 00:09:28 -05:00
618b092e8b
Guides and config templates for use in setting up private Veilid networks for independent or development needs.
90 lines
2.3 KiB
Markdown
Executable File
90 lines
2.3 KiB
Markdown
Executable File
# Starting a Generic/Public Veilid Bootstrap Server
|
|
|
|
## Instance Recommended Setup
|
|
|
|
CPU: Single
|
|
RAM: 1GB
|
|
Storage: 25GB
|
|
IP: Static v4 & v6
|
|
Firewall: 5150/TCP/UDP inbound allow all
|
|
|
|
## Install Veilid
|
|
|
|
Follow instructions in [INSTALL.md](./INSTALL.md)
|
|
|
|
## Configure Veilid as Bootstrap
|
|
|
|
### Stop the Veilid service
|
|
|
|
```shell
|
|
sudo systemctl stop veilid-server.service
|
|
```
|
|
|
|
### Setup the config
|
|
|
|
In _/etc/veilid-server/veilid-server.conf`_ ensure _bootstrap: ['bootstrap.<your.domain>']_ in the _routing_table:_ section
|
|
|
|
If you came here from the [dev network setup](./dev-setup/dev-network-setup.md) guide, this is when you set the network key.
|
|
|
|
**Switch to veilid user**
|
|
|
|
```shell
|
|
sudo -u veilid /bin/bash
|
|
```
|
|
|
|
### Generate a new keypair
|
|
|
|
Copy the output to secure storage such as a password manager. This information will be used in the next step and can be used for node recovery, moving to a different server, etc.
|
|
|
|
```shell
|
|
veilid-server --generate-key-pair
|
|
```
|
|
|
|
### Create new node ID and flush existing route table
|
|
|
|
Include the brackets [] when pasting the keys. Use the public key in the command. Secret key will be requested interactively and will not echo when pasted.
|
|
|
|
```shell
|
|
veilid-server --set-node-id [PUBLIC_KEY] --delete-table-store
|
|
```
|
|
|
|
### Generate the DNS TXT record
|
|
|
|
Copy the output to secure storage. This information will be use to setup DNS records.
|
|
|
|
```shell
|
|
veilid-server --dump-txt-record
|
|
```
|
|
|
|
### Start the Veilid service
|
|
|
|
Disconnect from the Veilid user and start veilid-server.service.
|
|
|
|
```shell
|
|
exit
|
|
```
|
|
|
|
```shell
|
|
sudo systemctl start veilid-server.service
|
|
```
|
|
|
|
Optionally configure the service to start at boot `sudo systemctl enable veilid-server.service`
|
|
|
|
_REPEAT FOR EACH BOOTSTRAP SERVER_
|
|
|
|
## Enter DNS Records
|
|
|
|
Create the following DNS Records for your domain:
|
|
|
|
(This example assumes two bootstrap serves are being created)
|
|
|
|
| Record | Value | Record Type |
|
|
|-----------|-----------------------------|-------------|
|
|
|bootstrap | 1,2 | TXT |
|
|
|1.bootstrap| IPv4 | A |
|
|
|1.bootstrap| IPv6 | AAAA |
|
|
|1.bootstrap| output of --dump-txt-record | TXT |
|
|
|2.bootstrap| IPv4 | A |
|
|
|2.bootstrap| IPv6 | AAAA |
|
|
|2.bootstrap| output of --dump-txt-record | TXT |
|