Git-Mirrors/tillitis-key
1
0
Fork 0
mirror of https://github.com/tillitis/tillitis-key1.git synced 2024-07-01 09:01:16 +00:00
Code Issues Packages Projects Releases Wiki Activity
f7f8ba3e16
tillitis-key/doc/toolchain_setup.md
Joachim Strömbergson f7f8ba3e16
Add instructions for updating the FW in the programmer
2022-09-21 14:30:16 +02:00

3.9 KiB
Raw Blame History

Toolchain setup

Here are instructions for setting up the tools required to build the project. Tested on Ubuntu 22.04 LTS.

Gateware: icestorm toolchain

These steps are used to build and install the icestorm toolchain (in /usr/local). Note that nextpnr replaces Arachne-PNR.

sudo apt install build-essential clang lld bison flex libreadline-dev \
                     gawk tcl-dev libffi-dev git mercurial graphviz   \
                     xdot pkg-config python3 libftdi-dev \
                     python3-dev libboost-dev libeigen3-dev \
                     libboost-dev libboost-filesystem-dev \
                     libboost-thread-dev libboost-program-options-dev \
                     libboost-iostreams-dev cmake libhidapi-dev

git clone https://github.com/YosysHQ/icestorm
cd icestorm
make -j$(nproc)
sudo make install
cd ..

# Custom iceprog for the RPi 2040-based programmer (will be upstreamed).
git clone -b interfaces https://github.com/tillitis/icestorm tillitis--icestorm
cd tillitis--icestorm/iceprog
make
sudo make PROGRAM_PREFIX=tillitis- install
cd ../..

git clone https://github.com/YosysHQ/yosys
cd yosys
# Avoiding current issue with yosys & icebram, filed in:
# https://github.com/YosysHQ/yosys/issues/3478
git checkout 06ef3f264afaa3eaeab45cc0404d8006c15f02b1
make -j$(nproc)
sudo make install
cd ..

git clone https://github.com/YosysHQ/nextpnr
cd nextpnr
cmake -DARCH=ice40 -DCMAKE_INSTALL_PREFIX=/usr/local .
make -j$(nproc)
sudo make install

References:

Firmware: riscv toolchain

The Tillitis Key 1 implements a picorv32 soft core CPU, which is a RISC-V microcontroller with the M and C instructions (RV32IMC). You can read more about it.

The project uses the LLVM/Clang suite, where version 14 is the latest stable (as of writing). Usually the LLVM/Clang packages that are part of your distro will work, if not, there are installations instructions for "Install (stable branch)" at https://apt.llvm.org/ for Debian and Ubuntu.

References:

Optional

These tools are used for specific sub-components of the project, and are not required for general development

Kicad 6.0: Circuit board designs

The circuit board designs were all created in KiCad 6.0.

mta1-usb-v1-programmer: RPi 2040 toolchain

These tools are needed to build the programmer firmware for the mta1-usb-v1-programmer

FW update of the programmer

The programmer runs a FW needed to program the devices, the source code is available on Githun:

https://github.com/Blinkinlabs/ice40_flasher

There is also a pre built FW binary for the programmer: https://github.com/Blinkinlabs/ice40_flasher/tree/main/bin

Download the file programmer FW file "main.uf2" to your host computer.

To program do the following.

  1. Press the "BOOTSEL" button on the RPi2040 board while connecting the board to the host
  2. Release the button after cvonnecting the board to the host. The board will now appear to the host as a USB connected storage device
  3. Open the storage device and drop the FW file ("main.uf2") into the storage device

The programmer will update its FW with the file and restart itself.

mta1-usb-v1: ch552 USB to Serial firmware

The USB to Serial firmware runs on the CH552 microcontroller, and provides a USB CDC profile which should work with the default drivers on all major operating systems.

TODO

References: