mirror of
https://github.com/tillitis/tillitis-key1.git
synced 2024-12-30 01:46:26 -05:00
59 lines
2.2 KiB
Markdown
59 lines
2.2 KiB
Markdown
# Threat model
|
|
|
|
## Introduction
|
|
The Tillitis Key 1 is a platform for running secure applications in a
|
|
restricted execution environment physically separate from the
|
|
device host. The secure applications provide functionality and
|
|
controlled access to derived secrets on the device. The purpose of the
|
|
device is to solve typical end user authentication problems.
|
|
|
|
This document describes the threat model for device. Based on the
|
|
system description and use cases, the threat model tries to capture and
|
|
describe the threats that needs to be mitigated in order for the
|
|
device to meet its purpose and objectives.
|
|
|
|
|
|
## Version information
|
|
The threat model will get updated and expanded for each release.
|
|
|
|
### engineering-release-1
|
|
This is an early release aimed at developers interested
|
|
in writing applications for Tillitis Key 1. The design allows easy access to
|
|
the board, and is even shipped with a programmer to download new FPGA bitstreams.
|
|
|
|
|
|
#### Known weakneses
|
|
The bitstream, which includes the Unique Device Secret (UDS) as well as the firmware
|
|
implementing the measured boot are stored as part of the bitstream in an external
|
|
Flash memory connected to the FPFGA.
|
|
|
|
The CH552 MCU providing USB host communication contains FW that implements the UART
|
|
communication with the FPGA. The firmware can be updated by performing *port knocking*.
|
|
The knock sequence is to apply 3.3V through a 10k resistor to the D+ line,
|
|
while powering on the device.
|
|
|
|
There may be possible buffer overflows via the USB host interface to the FW of the CH552,
|
|
allowing both execution and modification of the FW CH552.
|
|
|
|
|
|
#### Out of scope
|
|
- All physical and electrical attacks applied to the board, including:
|
|
- Reading out of the UDS from the external Flash chip
|
|
- Triggering of the FPGA warm boot functionality
|
|
- Triggering FW update of the CH552 MCU, using the port knocking mechanism
|
|
|
|
- Glitching attacks including:
|
|
- Faulting of the execution by the CPU in the FPGA and the CH552 MCU
|
|
- Disturbance of the TRNG entropy generation
|
|
|
|
- EM leakage
|
|
|
|
|
|
#### In scope
|
|
(Attacks we really would like to have investigated.)
|
|
|
|
- Digital attacks from the host against the FW in the FPGA, and the FPGA design itself
|
|
via the host interface.
|
|
|
|
- Timing attacks on the FW in the FPGA.
|