mirror of
https://github.com/tillitis/tillitis-key1.git
synced 2024-09-09 03:02:42 +00:00
58 lines
2.6 KiB
Markdown
58 lines
2.6 KiB
Markdown
# trng
|
|
Implementation of the Tillitis True Random Number Generator (TRNG).
|
|
|
|
## Introduction
|
|
Applications running on the Tillitis TKey device may have a need of random numbers.
|
|
As unpredictable initial vectors, as challnges, random tokens etc.
|
|
|
|
The Tillitis TRNG supports these applications by providing a hardware based
|
|
source of entropy (digital noise) with a uniform distribution.
|
|
|
|
Note that the data provided by the TRNG is entropy, not processed random numbers.
|
|
The data should NOT be used directly, but used as seed for a (cryptographically safe)
|
|
random number generator algorithm.
|
|
|
|
|
|
## Status
|
|
First version completed. In testing. Use with caution.
|
|
|
|
## How to use
|
|
The ready bit in the status register indicates that there is a new word of
|
|
entropy available to read out. Applications requiring multiple words of
|
|
entropy MUST wait for the ready bit to be set before reading ut
|
|
subseqent words. Not waiting for the ready bit to be set will lead to reading out
|
|
the same entropy data more than once.
|
|
|
|
Applications that need cryptographically safe random number should use the output
|
|
from the TRNG as seed to a Digital Random Bit Generator (DRBG), for example a Hash_DRBG.
|
|
|
|
|
|
## Implementation details
|
|
The implementation is based on free running digital oscillators. The implementation creates
|
|
two sets of oscillators by instantiating a number if LCs configured as one bit inverter gates,
|
|
where the output of the inverter is connected to its own input. The oscillators will have a toggle
|
|
rate based on the given internal gate delay and the wire delay through given by the feedback
|
|
circuit.
|
|
|
|
After a given number of clock cycles the outputs from the oscillators in each group are
|
|
XOR combined and sampled into two separate registers. This process is repeated a second time,
|
|
producing two more bits, one for each group. These two sets of two bits are then XOR combined
|
|
to produce a single entropy bit. This means that an entropy bit is the XOR combined result
|
|
from two oscillator groups over two sampling events.
|
|
|
|
Entropy bits are collected into an entropy word. When at least 32 bits have been collected,
|
|
the ready bit is set, indicating to SW that a new entropy word is available.
|
|
|
|
Note that the entropy word is not held for the SW to read out. Sampling and collection is running
|
|
continuosly, and the word read by SW will contain the latest 32 bits collected. Entropy bits
|
|
not read by SW will be discarded at the same rate as new bits are collected.
|
|
|
|
Currently the following build time parameters are used to configure the implementation:
|
|
|
|
- 4096 cycles between sampling
|
|
- 16 oscillators in each group
|
|
- 64 bits collected before setting the ready flag
|
|
|
|
|
|
---
|