qubes-doc/security/multifactor-authentication.md
2016-11-23 15:38:09 -08:00

187 lines
7.5 KiB
Markdown

---
layout: doc
title: Multifactor Authentication
permalink: /doc/multifactor-authentication/
redirect_from:
- /en/doc/multifactor-authentication/
- /doc/Multi-factorAuthentication/
---
Using Multi-factor Authentication with Qubes
============================================
(Note: This page concerns multi-factor authentication for logging into external
services, not for logging into Qubes itself. For the latter, see
[here][YubiKey].)
[Multi-factor authentication (MFA)][MFA] today most commonly takes the form of a
numerical code generated by a smartphone app or sent via SMS (text message)
which the user must enter in addition to a password in order to log in to a
website or other service.
One of the primary features of Qubes is that it allows us to create securely
isolated VMs which can run arbitrary programs. (These VMs are securely isolated
not only from each other but also, optionally, from the network.) This means
that we can create a dedicated, network-isolated VM to function as a secure
authenticator.
This guide will show you how to set up a VM which uses [oathtool][], an
open-source one-time password tool, to generate authentication codes. This
method presents several benefits over relying on a consumer smartphone app or
SMS:
* `oathtool` includes the [time-based one-time password (TOTP)][TOTP]
algorithm, which is the same algorithm used by [Google Authenticator][], one
of the most commonly used authenticator apps. This means that we can use
`oathtool` as a complete open-source replacement for Google Authenticator
(which became propriety (closed-source) in May 2013 after version 2.21).
* By keeping all of our authenticator data as plain text files in a dedicated
VM, we have complete control over the secret keys used to generate our
authentication tokens, and we can back up, copy, and transfer our
authenticator data at will.
* By creating a minimal environment in which to run `oathtool` from the command
line, we can minimize our attack surface relative to most smartphone apps and
SMS. Consumer smartphones are typically internet-facing devices which are
increasingly targeted by malware. Most smartphones are bundled with
proprietary software which allows service providers almost complete control
over the device. Likewise, consumer SMS messages are often cleartext
communications which can feasibly be intercepted and read by third parties.
(In cases in which SMS messages are encrypted on the network by the service
provider, the service provider itself still has full access, which means that
the contents of such messages could be read by unscrupulous admins or turned
over to government agencies.)
* Using `oathtool` in a dedicated, network-isolated Qubes VM allows us to
achieve a unique combination of security and convenience. The strong isolation
Qubes provides allows us to reap the full security benefits of MFA, while
virtualization frees us from having to worry about finding and handling a
second physical device.
Optional Preparation Steps
--------------------------
1. Start with a minimal template. In this example, we'll use the
[minimal Fedora template][FedoraMinimal]. Get it if you haven't already done
so:
[user@dom0 ~]$ sudo qubes-dom0-update qubes-template-fedora-24-minimal
2. Since we'll be making some modifications, you may want to clone the minimal
template:
[user@dom0 ~]$ qvm-clone fedora-24-minimal fedora-24-min-mfa
3. Since this is going to be a minimal environment in which we run `oathtool`
from the command line, we'll install only a couple of packages:
[user@fedora-24-min-mfa ~]$ su -
[user@fedora-24-min-mfa ~]# yum install oathtool vim-minimal
[user@fedora-24-min-mfa ~]$ poweroff
4. Create an AppVM and set it to use the TemplateVM we just created:
[user@dom0 ~]$ qvm-create -l black mfa
[user@dom0 ~]$ qvm-prefs -s mfa template fedora-24-min-mfa
5. Isolate the new AppVM from the network:
[user@dom0 ~]$ qvm-prefs -s mfa netvm none
Using the MFA AppVM
-------------------
Now that we have an AppVM set up to use `oathtool` securely, let's use it with
an external service. This process will vary slightly from service to service but
is largely the same.
1. Proceed with setting up multi-factor authentication as you normally would.
If you are prompted to scan a QR code, instead select the option (if
available) to view the secret key as text:
![Secret Key Example 0](/attachment/wiki/Multi-factorAuthentication/secret-key-example-0.png)
You should then see the secret key as text:
![Secret Key Example 1](/attachment/wiki/Multi-factorAuthentication/secret-key-example-1.png)
Note that the length and format of the secret key may vary by service:
![Secret Key Example 2](/attachment/wiki/Multi-factorAuthentication/secret-key-example-2.png)
2. In your MFA AppVM, you can now use `oathtool` to generate base32 TOTP
authentication tokens just like Google Authenticator would. In this example,
we'll use the secret key `xd2n mx5t ekg6 h6bi u74d 745k n4m7 zy3x` from the
second image above (substitute your own):
[user@mfa ~]$ oathtool --base32 --totp "xd2n mx5t ekg6 h6bi u74d 745k n4m7 zy3x"
279365
The output is `279365`. This is what you would enter when prompted for an
authenticator code. (Note that this is a *time*-based one-time password,
which means that your VM's clock must be sufficiently accurate in order to
generate a valid token. Qubes handles VM time syncing automatically, so you
normally shouldn't have to worry about this. As usual, the token will change
after a short period of time.)
3. To make this easier on ourselves in the future, we can create a simple shell
script for each service we use. (The example service here is a Google
account, using the example key from above. You'll get a unique secret key
from each service.) Create the script like so:
[user@mfa ~]$ > google
[user@mfa ~]$ vi google
#!/bin/bash
##My Google Account
##me@gmail.com
oathtool --base32 --totp "xd2n mx5t ekg6 h6bi u74d 745k n4m7 zy3x"
[user@mfa ~]$ chmod +x google
Since the secret key stored in the script never changes, we should never
have to update this script, but we can easily do so if we ever want to.
4. Now, whenever Google prompts us for an authenticator code, all we have to do
is this:
[user@mfa ~]$ ./google
640916
Done!
5. Now you can create scripts for any other TOTP-supporting services you use,
and enjoy the security and ease of quickly generating authentication tokens
right from your Qubes VM command-line:
[user@mfa ~]$ ./github
495272
[user@mfa ~]$ ./aws
396732
[user@mfa ~]$ ./facebook
851956
[user@mfa ~]$ ./dropbox
294106
[user@mfa ~]$ ./microsoft
295592
[user@mfa ~]$ ./slack
501731
[user@mfa ~]$ ./wordpress
914625
[user@mfa ~]$ ./tumblr
701463
For a more complete list of compatible services, see [here][usage].
[YubiKey]: /doc/YubiKey/
[MFA]: https://en.wikipedia.org/wiki/Multi-factor_authentication
[oathtool]: http://www.nongnu.org/oath-toolkit/man-oathtool.html
[TOTP]: https://en.wikipedia.org/wiki/Time-based_One-time_Password_Algorithm
[Google Authenticator]: https://en.wikipedia.org/wiki/Google_Authenticator
[FedoraMinimal]: /doc/Templates/FedoraMinimal/
[usage]: https://en.wikipedia.org/wiki/Google_Authenticator#Usage