mirror of
https://github.com/QubesOS/qubes-doc.git
synced 2024-10-01 01:25:40 -04:00
94 lines
4.2 KiB
Markdown
94 lines
4.2 KiB
Markdown
---
|
|
layout: doc
|
|
title: Secondary Storage
|
|
permalink: /doc/secondary-storage/
|
|
redirect_from:
|
|
- /en/doc/secondary-storage/
|
|
- /doc/SecondaryStorage/
|
|
- /wiki/SecondaryStorage/
|
|
---
|
|
|
|
Storing AppVMs on Secondary Drives
|
|
==================================
|
|
|
|
Suppose you have a fast but small primary SSD and a large but slow secondary HDD.
|
|
You want to store a subset of your AppVMs on the HDD.
|
|
|
|
## Instructions ##
|
|
|
|
Qubes 4.0 is more flexible than earlier versions about placing different VMs on different disks.
|
|
For example, you can keep templates on one disk and AppVMs on another, without messy symlinks.
|
|
|
|
These steps assume you have already created a separate [volume group](https://access.redhat.com/documentation/en-us/red_hat_enterprise_linux/6/html/logical_volume_manager_administration/vg_admin#VG_create) and [thin pool](https://access.redhat.com/documentation/en-us/red_hat_enterprise_linux/6/html/logical_volume_manager_administration/thinly_provisioned_volume_creation) (not thin volume) for your HDD.
|
|
See also [this example](https://www.linux.com/blog/how-full-encrypt-your-linux-system-lvm-luks) if you would like to create an encrypted LVM pool (but note you can use a single logical volume if preferred, and to use the `-T` option on `lvcreate` to specify it is thin). You can find the commands for this example applied to Qubes at the bottom of this R4.0 section.
|
|
|
|
First, collect some information in a dom0 terminal:
|
|
|
|
sudo pvs
|
|
sudo lvs
|
|
|
|
Take note of the VG and thin pool names for your HDD, then register it with Qubes:
|
|
|
|
# <pool_name> is a freely chosen pool name
|
|
# <vg_name> is LVM volume group name
|
|
# <thin_pool_name> is LVM thin pool name
|
|
qvm-pool --add <pool_name> lvm_thin -o volume_group=<vg_name>,thin_pool=<thin_pool_name>,revisions_to_keep=2
|
|
|
|
Now, you can create qubes in that pool:
|
|
|
|
qvm-create -P <pool_name> --label red <vmname>
|
|
|
|
It isn't possible to directly migrate an existing qube to the new pool, but you can clone it there, then remove the old one:
|
|
|
|
qvm-clone -P <pool_name> <sourceVMname> <cloneVMname>
|
|
qvm-remove <sourceVMname>
|
|
|
|
If that was a template, or other qube referenced elsewhere (NetVM or such), you will need to adjust those references manually after moving.
|
|
For example:
|
|
|
|
qvm-prefs <appvmname_based_on_old_template> template <new_template_name>
|
|
|
|
In theory, you can still use file-based disk images ("file" pool driver), but it lacks some features such as you won't be able to do backups without shutting down the qube.
|
|
|
|
### Example HDD setup ###
|
|
|
|
Assuming the secondary hard disk is at /dev/sdb (it will be completely erased), you can set it up for encryption by doing in a dom0 terminal (use the same passphrase as the main Qubes disk to avoid a second password prompt at boot):
|
|
|
|
sudo cryptsetup luksFormat --hash=sha512 --key-size=512 --cipher=aes-xts-plain64 --verify-passphrase /dev/sdb
|
|
sudo blkid /dev/sdb
|
|
|
|
Note the device's UUID (in this example "b209..."), we will use it as its luks name for auto-mounting at boot, by doing:
|
|
|
|
sudo nano /etc/crypttab
|
|
|
|
And adding this line (change both "b209..." for your device's UUID from blkid) to crypttab:
|
|
|
|
luks-b20975aa-8318-433d-8508-6c23982c6cde UUID=b20975aa-8318-433d-8508-6c23982c6cde none
|
|
|
|
Reboot the computer so the new luks device appears at /dev/mapper/luks-b209... and we can then create its pool, by doing this on a dom0 terminal (substitute the b209... UUIDs with yours):
|
|
|
|
First create the physical volume
|
|
|
|
sudo pvcreate /dev/mapper/luks-b20975aa-8318-433d-8508-6c23982c6cde
|
|
|
|
Then create the LVM volume group, we will use for example "qubes" as the <vg_name>:
|
|
|
|
sudo vgcreate qubes /dev/mapper/luks-b20975aa-8318-433d-8508-6c23982c6cde
|
|
|
|
And then use "poolhd0" as the <thin_pool_name> (LVM thin pool name):
|
|
|
|
sudo lvcreate -T -n poolhd0 -l +100%FREE qubes
|
|
|
|
Finally we will tell Qubes to add a new pool on the just created thin pool
|
|
|
|
qvm-pool --add poolhd0_qubes lvm_thin -o volume_group=qubes,thin_pool=poolhd0,revisions_to_keep=2
|
|
|
|
By default VMs will be created on the main Qubes disk (i.e. a small SSD), to create them on this secondary HDD do the following on a dom0 terminal:
|
|
|
|
qvm-create -P poolhd0_qubes --label red unstrusted-hdd
|
|
|
|
|
|
[Qubes Backup]: /doc/BackupRestore/
|
|
[TemplateVM]: /doc/Templates/
|
|
|