qubes-doc/BackupRestore.md

layout	title	permalink
wiki	BackupRestore	/wiki/BackupRestore/

Qubes Backup, Restoration, and Migration

1. Qubes Backup, Restoration, and Migration
   1. Creating a Backup
   2. Restoring from a Backup
   3. Emergency Backup Recovery without Qubes
   4. Migrating Between Two Physical Machines
   5. Troubleshooting and Technical Details

With Qubes, it's easy to back up and restore your whole system, as well as to migrate between two physical machines.

As of Qubes R2B3, these functions are integrated into the Qubes VM Manager GUI. There are also two command-line tools available which perform the same functions: qvm-backup and qvm-backup-restore.

Creating a Backup

1. In Qubes VM Manager, click System on the menu bar, then click Backup VMs in the dropdown list. This brings up the Qubes Backup VMs window.

2. Move the AppVMs which you desire to back up to the right-hand Selected column. AppVMs in the left-hand Available column will not be backed up.

Note: An AppVM must be shut down in order to be backed up. Currently running AppVMs appear in red.

Once you have selected all desired AppVMs, click Next.

1. Select the destination for the backup:

• If you wish to send your backup to a USB mass storage device, select the device in the dropdown box next to Device.
• If you wish to send your backup to a (currently running) AppVM, select the AppVM in the dropdown box next to Target AppVM.

You must also specify a directory on the device or in the AppVM as a destination for your backup. For example, if you wish to send your backup to a the ~/backups folder in the target AppVM, you would simply type backups in this field. This destination directory must already exist. If it does not exist, you must create it manually prior to backing up.

At this point, you must also choose whether to encrypt your backup by checking or unchecking the Encrypt backup box.

Note: It is strongly recommended that you encrypt all backups which will be sent to untrusted destinations!

Note: The supplied passphrase is used for both encryption/decryption and integrity verification. If you decide not to encrypt your backup (by unchecking the Encrypt backup box), the passphrase you supply will be used only for integrity verification. If you supply a passphrase but do not check the Encrypt backup box, your backup will not be encrypted!

1. When you are ready, click Next. Qubes will proceed to create your backup. Once the progress bar has completed, you may click Finish.

Restoring from a Backup

1. In Qubes VM Manager, click System on the menu bar, then click Restore VMs from backup in the dropdown list. This brings up the Qubes Restore VMs window.

2. Select the source location of the backup to be restored:

• If your backup is located on a USB mass storage device, select the device in the dropdown box next to Device.
• If your backup is located on a (currently running) AppVM, select the AppVM in the dropdown box next to AppVM.

You must also specify the directory in which the backup resides. If you followed the instructions in the previous section, "Creating a Backup," then your backup is most likely in the location you chose as the destination in step 3. For example, if you had chosen the ~/backups directory of an AppVM as your destination in step 3, you would now select the same AppVM and again type backups into the Backup directory field.

Note: After you have typed the directory location of the backup in the Backup directory field, click the elipsis button (...) to the right of the field.

1. There are three options you may select when restoring from a backup:

   1. ignore missing: If any of the AppVMs in your backup depended upon a NetVM, ProxyVM, or TemplateVM which is not present in (i.e., "missing from") the current system, checking this box will ignore the fact that they are missing and restore the AppVMs anyway.
   2. ignore username mismatch: This option applies only to the restoration of dom0's home directory. If your backup was created on a Qubes system which had a different dom0 username than the dom0 username of the current system, then checking this box will ignore the mismatch between the two usernames and proceed to restore the home directory anyway.
   3. skip dom0: If this box is checked, dom0's home directory will not be restored from your backup.

2. If your backup is encrypted, you must check the Encrypted backup box. If a passphrase was supplied during the creation of your backup (regardless of whether it is encrypted), then you must supply it here.

Note: The passphrase which was supplied when the backup was created was used for both encryption/decryption and integrity verification. If the backup was not encrypted, the supplied passphrase is used only for integrity verification.

Note: An AppVM cannot be restored from a backup if an AppVM with the same name already exists on the current system. You must first remove or change the name of any AppVM with the same name in order to restore such an AppVM.

1. When you are ready, click Next. Qubes will proceed to restore from your backup. Once the progress bar has completed, you may click Finish.

Emergency Backup Recovery without Qubes

The Qubes backup system was been designed with emergency disaster recovery in mind. No special Qubes-specific tools are required to access data backed up by Qubes. In the event a Qubes system is unavailable, you can access your data on any GNU/Linux system with the following procedure.

1. Untar the main backup file.

   [user@restore ~]$ cd backups
   [user@restore backups]$ tar -i -xvf qubes-backup-2013-12-26-123456
   qubes.xml.000
   qubes.xml.000.hmac
   vm1/private.img.000
   vm1/private.img.000.hmac
   vm1/icon.png.000
   vm1/icon.png.000.hmac
   vm1/firewall.xml.000
   vm1/firewall.xml.000.hmac
   vm1/whitelisted-appmenus.list.000
   vm1/whitelisted-appmenus.list.000.hmac
   dom0-home/dom0user.000
   dom0-home/dom0user.000.hmac
   

2. Verify the integrity of the private.img file which houses your data.

   [user@restore backups]$ openssl dgst -hmac "your_passphrase" vm1/private.img.000
   HMAC-SHA1(vm1/private.img.000)= 0d5855222a697d0568cf97792318fe53fe963a05
   [user@restore backups]$ cat vm1/private.img.000.hmac 
   (stdin)= 0d5855222a697d0568cf97792318fe53fe963a05
   

Note: The hash values should match. If they do not match, then the backup file may have been tampered with, or there may have been a storage error.

1. Decrypt the private.img file.

   [user@restore ~]$ cd vm1
   [user@restore vm1]$ openssl enc -d -pass pass:your_passphrase -aes-256-cbc -in private.img.000 -out private.img.dec.000
   

Note: For multi-part files, a loop can be used:

for f in private.img.*; do
  openssl enc -d -pass pass:your_passphrase -aes-256-cbc -in $f -out
${f/.img/.img.dec}
done

Note: If your backup was encrypted with a cipher other than aes-256-cbc, you must replace it with the correct cipher command. Available ciphers commands can be found with openssl --help.

1. Untar the decrypted private.img file.

   [user@restore vm1]$ tar -M -xvf private.img.dec.000
   vm1/private.img
   

   Note: For multi-part files, a script is required:

   1. Create a new-volume-script:

      #!/bin/sh
      name=`expr $TAR_ARCHIVE : '\(.*\)\..*'`
      suffix=`printf %03d $[ $TAR_VOLUME - 1 ]`
      echo $name.$suffix >&$TAR_FD
      

   2. chmod +x new-volume-script.

   3. tar --new-volume-script=./new-volume-script -xvf private.img.dec.000. (The --new-volume-script option enables multi-volume untaring.)

2. Mount the private.img file and access your data.

   [user@restore vm1]$ cd vm1
   [user@restore vm1]$ sudo mkdir /mnt/recovered-image
   [user@restore vm1]$ sudo mount -o loop private.img /mnt/recovered-image
   [user@restore vm1]$ cd
   [user@restore ~]$ cat /mnt/recovered-image/home/user/recovered-data.txt
   This data has been recovered successfully!
   

Migrating Between Two Physical Machines

In order to migrate your Qubes system from one physical machine to another, simply follow the backup procedure on the old machine, install Qubes on the new machine, and follow the restoration procedure on the new machine. All of your settings and data will be preserved!

Troubleshooting and Technical Details

• For troubleshooting (especially if you encounter a bug or error message during the backup or restore process), please refer to ​this thread.

• For the technical details of the backup system, please refer to ​this thread.