qubes-doc/common-tasks/backup-emergency-restore-v3.md

104 lines
5.7 KiB
Markdown

---
layout: doc
title: Emergency Backup Recovery - format version 3
permalink: /doc/backup-emergency-restore-v3/
redirect_from:
- /en/doc/backup-emergency-restore-v3/
- /doc/BackupEmergencyRestoreV3/
---
Emergency Backup Recovery without Qubes - format version 3
==========================================================
This page describes how to perform an emergency restore of a backup created on Qubes R2 or later (which uses backup format version 3).
The Qubes backup system has been designed with emergency disaster recovery in mind. No special Qubes-specific tools are required to access data backed up by Qubes. In the event a Qubes system is unavailable, you can access your data on any GNU/Linux system with the following procedure.
**Note:** In the following example, the backup file is both *encrypted* and *compressed*.
1. Untar the main backup file.
[user@restore ~]$ tar -i -xvf qubes-backup-2015-06-05T123456
backup-header
backup-header.hmac
qubes.xml.000
qubes.xml.000.hmac
vm1/private.img.000
vm1/private.img.000.hmac
vm1/icon.png.000
vm1/icon.png.000.hmac
vm1/firewall.xml.000
vm1/firewall.xml.000.hmac
vm1/whitelisted-appmenus.list.000
vm1/whitelisted-appmenus.list.000.hmac
dom0-home/dom0user.000
dom0-home/dom0user.000.hmac
2. Verify the integrity of the `backup-header` file, which contains basic information about your backup.
[user@restore ~]$ openssl dgst -sha512 -hmac "your_passphrase" backup-header
HMAC-SHA512(backup-header)= 5b266783e116fe3b2601a54c249ca5f5f96d421dfe6828eeaeb2dcd014e9e945c27b3d7b0f952f5d55c927318906d9c360f387b0e1f069bb8195e96543e2969c
[user@restore ~]$ cat backup-header.hmac
(stdin)= 5b266783e116fe3b2601a54c249ca5f5f96d421dfe6828eeaeb2dcd014e9e945c27b3d7b0f952f5d55c927318906d9c360f387b0e1f069bb8195e96543e2969c
**Note:** The hash values should match. If they do not match, then the backup file may have been tampered with, or there may have been a storage error.
**Note:** If your backup was hashed with a message digest algorithm other than `sha512`, you must substitute the correct message digest command. This information is contained in the `backup-header` file (see step 3), however it is not recommended to open this file until its integrity and authenticity has been verified (the current step). A complete list of supported message digest algorithms can be found with `openssl list-message-digest-algorithms`.
3. Read the `backup-header`. You'll need some of this information later. The file will look similar to this:
[user@restore ~]$ cat backup-header
version=3
hmac-algorithm=SHA512
crypto-algorithm=aes-256-cbc
encrypted=True
compressed=True
compression-filter=gzip
**Note:** If you see `version=2` here, go to [Emergency Backup Recovery - format version 2](/doc/backup-emergency-restore-v2/) instead.
4. Verify the integrity of the `private.img` file which houses your data.
[user@restore ~]$ cd vm1/
[user@restore vm1]$ openssl dgst -sha512 -hmac "your_passphrase" private.img.000
HMAC-SHA512(private.img.000)= cf83e1357eefb8bdf1542850d66d8007d620e4050b5715dc83f4a921d36ce9ce47d0d13c5d85f2b0ff8318d2877eec2f63b931bd47417a81a538327af927da3e
[user@restore vm1]$ cat private.img.000.hmac
(stdin)= cf83e1357eefb8bdf1542850d66d8007d620e4050b5715dc83f4a921d36ce9ce47d0d13c5d85f2b0ff8318d2877eec2f63b931bd47417a81a538327af927da3e
**Note:** The hash values should match. If they do not match, then the backup file may have been tampered with, or there may have been a storage error.
**Note:** If your backup was hashed with a message digest algorithm other than `sha512`, you must substitute the correct message digest command. This information is contained in the `backup-header` file (see step 3). A complete list of supported message digest algorithms can be found with `openssl list-message-digest-algorithms`.
5. Decrypt the `private.img` file.
[user@restore vm1]$ cat private.img.??? | openssl enc -d -pass pass:your_passphrase -aes-256-cbc -out private.img.dec
**Note:** If your backup was encrypted with a cipher algorithm other than `aes-256-cbc`, you must substitute the correct cipher command. This information is contained in the `backup-header` file (see step 3). A complete list of supported cipher algorithms can be found with `openssl list-cipher-algorithms`.
6. Decompress the decrypted `private.img` file.
[user@restore vm1]$ zforce private.img.dec
private.img.dec -- replaced with private.img.dec.gz
[user@restore vm1]$ gunzip private.img.dec.gz
**Note:** If your backup was compressed with a program other than `gzip`, you must substitute the correct compression program. This information is contained in the `backup-header` file (see step 3).
7. Untar the decrypted and decompressed `private.img` file.
[user@restore vm1]$ tar -xvf private.img.dec
vm1/private.img
8. Mount the private.img file and access your data.
[user@restore vm1]$ sudo mkdir /mnt/img
[user@restore vm1]$ sudo mount -o loop vm1/private.img /mnt/img/
[user@restore vm1]$ cat /mnt/img/home/user/your_data.txt
This data has been successfully recovered!
9. Success! If you wish to recover data from more than one VM in your backup, simply repeat steps 4--8 for each additional VM.
**Note:** You may wish to store a copy of these instructions with your Qubes backups in the event that you fail to recall the above procedure while this web page is inaccessible. All Qubes documentation, including this page, is available in plain text format in the following Git repository:
https://github.com/QubesOS/qubes-doc.git