Git-Mirrors/qubes-doc
1
0
Fork 0
mirror of https://github.com/QubesOS/qubes-doc.git synced 2024-10-01 01:25:40 -04:00
Code Issues Packages Projects Releases Wiki Activity
ab51edeb9e
qubes-doc/configuration/resize-disk-image.md
awokd 940f0e8d69
add r4.0 template resize
2018-02-21 15:10:14 +00:00

4.5 KiB
Raw Blame History

layout title permalink redirect_from
doc Resize Disk Image /doc/resize-disk-image/
/en/doc/resize-disk-image/
/en/doc/resize-root-disk-image/
/doc/ResizeDiskImage/
/doc/ResizeRootDiskImage/
/wiki/ResizeDiskImage/
/wiki/ResizeRootDiskImage/

Resize Disk Image

There are several disk images which can be easily extended, but pay attention to the overall consumed space of your sparse/thin disk images. See also OS Specific Follow-up Instructions at the end of this page.

Template disk image (R4.0)

If you want install a lot of software in your TemplateVM, you may need to increase the amount of disk space your TemplateVM can use. Make sure changes in the TemplateVM between reboots don't exceed 10G.

  1. Resize the root image using Qubes version specific procedure below.
  2. Start the template.
  3. Resize the filesystem using OS appropriate tools (Qubes will handle this automatically under Linux).
  4. Verify available space in the template using df -h or OS specific tools.
  5. Shutdown the template.

Template disk image (R3.2)

If you want install a lot of software in your TemplateVM, you may need to increase the amount of disk space your TemplateVM can use. Make sure changes in the TemplateVM between reboots don't exceed 10G.

  1. Make sure that all the VMs based on this template are shut down (including netvms etc).
  2. Resize the root image using Qubes version specific procedure below.
  3. If any netvm/proxyvm used by this template is based on it, set template's netvm to none.
  4. Start the template.
  5. Resize the filesystem using OS appropriate tools (Linux is sudo resize2fs /dev/mapper/dmroot).
  6. Verify available space in the template using df -h or OS specific tools.
  7. Shutdown the template.
  8. Restore original netvm setting (if changed), and check firewall settings (setting netvm to none causes the firewall to reset to "block all")

Expand disk image (R4.0)

1048576 MiB is the maximum size which can be assigned to storage through Qube Manager.

To grow the root or private disk image of an AppVM beyond this limit, qvm-volume can be used:

qvm-volume extend <vm_name>:root <size>

OR

qvm-volume extend <vm_name>:private <size>

Note: Size is the target size (i.e. 4096MB or 16GB, ...), not the size to add to the existing disk.

Expand disk image (R3.2)

1048576 MB is the maximum size which can be assigned to storage through Qubes Manager.

To grow the private disk image of an AppVM beyond this limit, qvm-grow-root or qvm-grow-private can be used:

qvm-grow-root <vm-name> <size>

OR

qvm-grow-private <vm-name> <size>

Note: Size is the target size (i.e. 4096MB or 16GB, ...), not the size to add to the existing disk.

Resize a StandaloneVM Root Image

For more flexibility, you may also turn your TemplateVM into a StandaloneVM. Doing this means it will have its own root filesystem (StandaloneVMs use a copy of the template, instead of smart sharing). To do this run qvm-create --standalone from dom0 console, then perform the OS Specific Follow-up Instructions below.

Shrinking a disk image

Ext4 and most other filesystems do not support online shrinking, so it can't be done as conveniently as growing the image. Note that we don't want to touch the VM filesystem directly in dom0 for security reasons.

  1. Create a new qube with smaller disk using Qube Manager or qvm-create
  2. Move data to the new qube using qvm-copy, backup & restore, or OS utilities
  3. Delete old qube using Qube Manager or qvm-remove

OS Specific Follow-up Instructions

After expanding volumes, the partition table and file-system may need to be adjusted. Use tools appropriate to the OS in your qube. Brief instructions for Windows 7, FreeBSD, and Linux are provided below.

Windows 7

  1. Click Start
  2. type "diskmgmt.msc" - this takes you to Disk Management
  3. Right-click on your existing volume, select "Extend Volume..."
  4. Click through the wizard.

No reboot required.

FreeBSD

gpart recover ada0
sysctl kern.geom.debugflags=0x10
gpart resize -i index ada0
zpool online -e poolname ada0

Linux

Qubes will automatically grow the filesystem for you on AppVMs but not HVMs (or Template root images on R3.2). You will see that there is unallocated free space at the end of your primary disk. You can use standard linux tools like fdisk and resize2fs to make this space available.