qubes-doc/external/security-guides/yubi-key.md

layout	title	permalink	redirect_from
doc	YubiKey in Qubes	/doc/yubi-key/	/en/doc/yubi-key/ /doc/YubiKey/

Using YubiKey to Qubes authentication

You can use YubiKey to enhance Qubes user authentication, for example to mitigate risk of snooping the password. This can also slightly improve security when you have USB keyboard.

There (at least) two possible configurations: using OTP mode and using challenge-response mode.

OTP mode

This can be configured using app-linux-yubikey package. This package does not support sharing the same key slot with other applications (it will deny further authentications if you try).

Contrary to instruction there, currently there is no binary package in the Qubes repository and you need to compile it yourself. This might change in the future.

Challenge-response mode

In this mode, your YubiKey will generate a response based on the secret key, and random challenge (instead of counter). This means that it isn't possible to generate a response in advance even if someone gets access to your YubiKey. This makes it reasonably safe to use the same YubiKey for other services (also in challenge-response mode).

Same as in the OTP case, you will need to set up your YubiKey, choose a separate password (other than your login password!) and apply the configuration.

To use this mode you need to:

1. Install yubikey personalization the packages in your TemplateVM on which your USB VM is based.

   For Fedora.

   sudo dnf install ykpers yubikey-personalization-gui
   

   For Debian.

   sudo apt-get install yubikey-personalization yubikey-personalization-gui
   

   Shut down your TemplateVM. Then reboot your USB VM (so changes inside the TemplateVM take effect in your TemplateBased USB VM or install the packages inside your USB VM if you would like to avoid rebooting your USB VM.

2. Configure your YubiKey for challenge-response HMAC-SHA1 mode, for example following this tutorial.

   On Debian, you can run the graphical user interface yubikey-personalization-gui from the command line.

   • Choose configuration slot 2.
   • It is recommended to enable Require user input (button press) but this is optional.
   • Note: Different from the above video, use the following settings select HMAC-SHA1 mode: fixed 64 bit input.
   • We will refer the Secret Key (20 bytes hex) as AESKEY.
     • It is recommended to keep a backup of your AESKEY in an offline VM used as vault.
     • Consider to keep a backup of your AESKEY on paper and store it in a safe place.
     • In case you have multiple YubiKeys for backup purposes (in case a yubikey gets lost, stolen or breaks) you can write the same settings into other YubiKeys.

3. Install qubes-app-yubikey in dom0.

   sudo qubes-dom0-update qubes-yubikey-dom0
   

4. Adjust USB VM name in case you are using something other than the default sys-usb by editing /etc/qubes/yk-keys/yk-vm in dom0.

5. Paste your AESKEY from step 2 into /etc/qubes/yk-keys/yk-secret-key.hex in dom0.

6. Paste your hashed password (other than your standard Qubes password) into /etc/qubes/yk-keys/yk-login-pass-hashed.hex in dom0.

   You can calculate your hashed password using the following two commands. First run the following command to store your password in a temporary variable password. (This way your password will not leak to the terminal command history file.)

   read password
   

   Now run the following command to calculate your hashed password.

   echo -n "$password" | openssl dgst -sha1
   

7. Edit /etc/pam.d/login in dom0. Add this line at the beginning:

   auth include yubikey
   

8. Edit /etc/pam.d/xscreensaver (or appropriate file if you are using other screen locker program) in dom0. Add this line at the beginning:

    auth include yubikey
   

9. Edit /etc/pam.d/lightdm (or appropriate file if you are using other display manager) in dom0. Add this line at the beginning:

    auth include yubikey
   

Usage

When you want to unlock your screen...

1. Plug YubiKey into USB slot.
2. Enter password associated with YubiKey.
3. Press Enter.
4. If you configured so, YubiKey will request confirmation by pressing button on it (it will blink).

When everything is ok, your screen will be unlocked.

In any case you can still use your login password, but do it in a secure location where no one can snoop your password.

Mandatory YubiKey Login

Edit /etc/pam.d/yubikey (or appropriate file if you are using other screen locker program) and remove default=ignore so the line looks like this.

auth [success=done] pam_exec.so expose_authtok quiet /usr/bin/yk-auth

Locking the screen when YubiKey is removed

You can setup your system to automatically lock the screen when you unplug your YubiKey. This will require creating a simple qrexec service which will expose the ability to lock the screen to your USB VM, and then adding a udev hook to actually call that service.

In dom0:

1. First configure the qrexec service. Create /etc/qubes-rpc/custom.LockScreen with a simple command to lock the screen. In the case of xscreensaver (used in Xfce) it would be:

    DISPLAY=:0 xscreensaver-command -lock
   

2. Allow your USB VM to call that service. Assuming that it's named sys-usb it would require creating /etc/qubes-rpc/policy/custom.LockScreen with:

    sys-usb dom0 allow
   

In your USB VM:

3. Create udev hook. Store it in /rw/config to have it persist across VM restarts. For example name the file /rw/config/yubikey.rules. Add the following line:

    ACTION=="remove", SUBSYSTEM=="usb", ENV{ID_SECURITY_TOKEN}=="1", RUN+="/usr/bin/qrexec-client-vm dom0 custom.LockScreen"
   

4. Ensure that the udev hook is placed in the right place after VM restart. Append to /rw/config/rc.local:

    ln -s /rw/config/yubikey.rules /etc/udev/rules.d/
    udevadm control --reload
   

5. Then make /rw/config/rc.local executable.

    sudo chmod +x /rw/config/rc.local
   

6. For changes to take effect, you need to call this script manually for the first time.

    sudo /rw/config/rc.local
   

If you use KDE, the command(s) in first step would be different:

    # In the case of USB VM being autostarted, it will not have direct access to D-Bus
    # session bus, so find its address manually:
    kde_pid=`pidof kdeinit4`
    export `cat /proc/$kde_pid/environ|grep -ao 'DBUS_SESSION_BUS_ADDRESS=[[:graph:]]*'`
    qdbus org.freedesktop.ScreenSaver /ScreenSaver Lock