mirror of
https://github.com/QubesOS/qubes-doc.git
synced 2024-12-30 09:46:28 -05:00
159 lines
6.1 KiB
Markdown
159 lines
6.1 KiB
Markdown
---
|
|
lang: en
|
|
layout: doc
|
|
permalink: /doc/usb-devices/
|
|
redirect_from:
|
|
- /doc/usb/
|
|
ref: 195
|
|
title: USB Devices
|
|
---
|
|
|
|
# USB Devices
|
|
|
|
*This page is part of [device handling in qubes](/doc/device-handling/).*
|
|
|
|
If you are looking to handle USB *storage* devices (thumbdrives or USB-drives), please have a look at the [block device](/doc/block-devices/) page.
|
|
|
|
**Note:** Attaching USB devices to VMs requires a [USB qube](/doc/usb-qubes/).
|
|
|
|
**Important security warning:** USB passthrough comes with many security implications.
|
|
Please make sure you carefully read and understand the **[security considerations](/doc/device-handling-security/#usb-security)**.
|
|
Whenever possible, attach a [block device](/doc/block-devices/) instead.
|
|
|
|
Examples of valid cases for USB-passthrough:
|
|
|
|
- [microcontroller programming](https://www.arduino.cc/en/Main/Howto)
|
|
- [external audio devices](/doc/external-audio/)
|
|
- [optical drives](/doc/recording-optical-discs/) for recording
|
|
|
|
(If you are thinking to use a two-factor-authentication device, [there is an app for that](/doc/u2f-proxy/).
|
|
But it has some [issues](https://github.com/QubesOS/qubes-issues/issues/4661).)
|
|
|
|
## Attaching And Detaching a USB Device
|
|
|
|
### With Qubes Device Manager
|
|
|
|
Click the device-manager-icon: 
|
|
A list of available devices appears.
|
|
USB-devices have a USB-icon to their right: 
|
|
|
|
Hover on one device to display a list of VMs you may attach it to.
|
|
|
|
Click one of those.
|
|
The USB device will be attached to it.
|
|
You're done.
|
|
|
|
After you finished using the USB-device, you can detach it the same way by clicking on the Devices Widget.
|
|
You will see an entry in bold for your device such as **`sys-usb:2-5 - 058f_USB_2.0_Camera`**.
|
|
Hover on the attached device to display a list of running VMs.
|
|
The one to which your device is connected will have an eject button  next to it.
|
|
Click that and your device will be detached.
|
|
|
|
### With The Command Line Tool
|
|
|
|
In dom0, you can use `qvm-usb` from the commandline to attach and detach devices.
|
|
|
|
Listing available USB devices:
|
|
|
|
```shell_session
|
|
[user@dom0 ~]$ qvm-usb
|
|
BACKEND:DEVID DESCRIPTION USED BY
|
|
sys-usb:2-4 04ca:300d 04ca_300d
|
|
sys-usb:2-5 058f:3822 058f_USB_2.0_Camera
|
|
sys-usb:2-1 03f0:0641 PixArt_HP_X1200_USB_Optical_Mouse
|
|
```
|
|
|
|
Attaching selected USB device:
|
|
|
|
```shell_session
|
|
[user@dom0 ~]$ qvm-usb attach work sys-usb:2-5
|
|
[user@dom0 ~]$ qvm-usb
|
|
BACKEND:DEVID DESCRIPTION USED BY
|
|
sys-usb:2-4 04ca:300d 04ca_300d
|
|
sys-usb:2-5 058f:3822 058f_USB_2.0_Camera work
|
|
sys-usb:2-1 03f0:0641 PixArt_Optical_Mouse
|
|
```
|
|
|
|
Now, you can use your USB device (camera in this case) in the `work` qube.
|
|
If you see the error `ERROR: qubes-usb-proxy not installed in the VM` instead, please refer to the [Installation Section](#installation-of-qubes-usb-proxy).
|
|
|
|
When you finish, detach the device.
|
|
|
|
```shell_session
|
|
[user@dom0 ~]$ qvm-usb detach work sys-usb:2-5
|
|
[user@dom0 ~]$ qvm-usb
|
|
BACKEND:DEVID DESCRIPTION USED BY
|
|
sys-usb:2-4 04ca:300d 04ca_300d
|
|
sys-usb:2-5 058f:3822 058f_USB_2.0_Camera
|
|
sys-usb:2-1 03f0:0641 PixArt_Optical_Mouse
|
|
```
|
|
|
|
## Maintenance And Customisation
|
|
|
|
### Creating And Using a USB qube
|
|
|
|
If you've selected to install a usb-qube during system installation, everything is already set up for you in `sys-usb`.
|
|
If you've later decided to create a usb-qube, please follow [this guide](/doc/usb-qubes/).
|
|
|
|
### Installation Of `qubes-usb-proxy`
|
|
|
|
To use this feature, the `qubes-usb-proxy` package needs to be installed in the templates used for the USB qube and qubes you want to connect USB devices to.
|
|
This section exists for reference or in case something broke and you need to reinstall `qubes-usb-proxy`.
|
|
Under normal conditions, `qubes-usb-proxy` should already be installed and good to go.
|
|
|
|
If you receive this error: `ERROR: qubes-usb-proxy not installed in the VM`, you can install the `qubes-usb-proxy` with the package manager in the VM you want to attach the USB device to.
|
|
|
|
- Fedora: `sudo dnf install qubes-usb-proxy`
|
|
- Debian/Ubuntu: `sudo apt-get install qubes-usb-proxy`
|
|
|
|
### Using USB Keyboards And Other Input Devices
|
|
|
|
**Warning:** especially keyboards need to be accepted by default when using them to login! Please make sure you carefully read and understood the **[security considerations](/doc/device-handling-security/#usb-security)** before continuing!
|
|
|
|
Mouse and keyboard setup are part of [setting up a USB-qube](/doc/usb-qubes/#enable-a-usb-keyboard-for-login).
|
|
|
|
### Finding The Right USB Controller
|
|
|
|
Some USB devices are not compatible with the USB pass-through method Qubes employs.
|
|
In situations like these, you can try to pass through the entire USB controller to a qube as PCI device.
|
|
However, with this approach one cannot attach single USB devices but has to attach the whole USB controller with whatever USB devices are connected to it.
|
|
|
|
If you have multiple USB controllers, you must first figure out which PCI device is the right controller.
|
|
|
|
First, find out which USB bus the device is connected to (note that these steps need to be run from a terminal inside your USB qube):
|
|
|
|
```
|
|
lsusb
|
|
```
|
|
|
|
For example, I want to attach a broadband modem to the NetVM.
|
|
In the output of `lsusb` it may be listed as something like:
|
|
|
|
```
|
|
Bus 003 Device 003: ID 413c:818d Dell Computer Corp.
|
|
```
|
|
|
|
(In this case, the device isn't fully identified)
|
|
|
|
The device is connected to USB bus \#3.
|
|
Check which other devices are connected to the same bus, since *all* of them will be attach to the same VM.
|
|
|
|
To find the right controller, follow the usb bus:
|
|
|
|
```
|
|
readlink /sys/bus/usb/devices/usb3
|
|
```
|
|
|
|
This should output something like:
|
|
|
|
```
|
|
../../../devices/pci-0/pci0000:00/0000:00:1a.0/usb3
|
|
```
|
|
|
|
Now you see the path and the text between `/pci0000:00/0000:` and `/usb3` i.e. `00:1a.0` is the BDF address. Strip the address and pass it to the [`qvm-pci` tool](/doc/pci-devices/) to attach the controller to the targetVM.
|
|
|
|
For example, On R 4.0 the command would look something like
|
|
|
|
`qvm-pci attach --persistent personal dom0:00_1a.0`
|
|
|