qubes-doc/user/security-in-qubes/firewall.md

lang	layout	permalink	redirect_from	ref	title
en	doc	/doc/firewall/	/doc/qubes-firewall/ /en/doc/qubes-firewall/ /doc/QubesFirewall/ /wiki/QubesFirewall/	166	Firewall

Understanding firewalling in Qubes

Every qube in Qubes is connected to the network via a FirewallVM, which is used to enforce network-level policies. By default there is one default FirewallVM, but the user is free to create more, if needed.

For more information, see the following:

• https://groups.google.com/group/qubes-devel/browse_thread/thread/9e231b0e14bf9d62
• https://blog.invisiblethings.org/2011/09/28/playing-with-qubes-networking-for-fun.html

How to edit rules

In order to edit rules for a given qube, select it in the Qube Manager and press the "firewall" button.

If the qube is running, you can open Settings from the Qube Popup Menu.

R4.0 note: ICMP and DNS are no longer accessible in the GUI, but can be changed via qvm-firewall described below. Connections to Updates Proxy are not made over a network so can not be allowed or blocked with firewall rules, but are controlled using the relevant policy file (see R4.0 Updates proxy for more detail).

Note that if you specify a rule by DNS name it will be resolved to IP(s) at the moment of applying the rules, and not on the fly for each new connection. This means it will not work for servers using load balancing, and traffic to complex web sites which draw from many servers will be difficult to control.

Instead of using the firewall GUI, you can use the qvm-firewall command in Dom0 to edit the firewall rules by hand. This gives you greater control than by using the GUI.

The firewall rules for each qube are saved in an XML file in that qube's directory in dom0:

/var/lib/qubes/appvms/<vm-name>/firewall.xml

Rules are implemented on the netvm.

You can also manually create rules in the qube itself using standard firewalling controls. See Where to put firewall rules. In complex cases, it might be appropriate to load a ruleset using iptables-restore called from /rw/config/rc.local. if you do this, be aware that rc.local is called after the network is up, so local rules should not be relied upon to block leaks.

Reconnecting qubes after a NetVM reboot

Normally Qubes doesn't let the user stop a NetVM if there are other qubes running which use it as their own NetVM. But in case the NetVM stops for whatever reason (e.g. it crashes, or the user forces its shutdown via qvm-kill via terminal in Dom0), Qubes R4.0 will often automatically repair the connection. If it does not, then there is an easy way to restore the connection to the NetVM by issuing in dom0:

qvm-prefs <vm> netvm <netvm>

Normally qubes do not connect directly to the actual NetVM which has networking devices, but rather to the default sys-firewall first, and in most cases it would be the NetVM that will crash, e.g. in response to S3 sleep/restore or other issues with WiFi drivers. In that case it is only necessary to issue the above command once, for the sys-firewall (this assumes default VM-naming used by the default Qubes installation):

qvm-prefs sys-firewall netvm sys-net

Network service qubes

Qubes does not support running any networking services (e.g. VPN, local DNS server, IPS, ...) directly in a qube that is used to run the Qubes firewall service (usually sys-firewall) for good reasons. In particular, if you want to ensure proper functioning of the Qubes firewall, you should not tinker with iptables or nftables rules in such qubes.

Instead, you should deploy a network infrastructure such as

sys-net <--> sys-firewall-1 <--> network service qube <--> sys-firewall-2 <--> [client qubes]

Thereby sys-firewall-1 is only needed if you have other client qubes connected there, or you want to manage the traffic of the local network service qube. The sys-firewall-2 proxy ensures that:

1. Firewall changes done in the network service qube cannot render the Qubes firewall ineffective.
2. Changes to the Qubes firewall by the Qubes maintainers cannot lead to unwanted information leakage in combination with user rules deployed in the network service qube.
3. A compromise of the network service qube does not compromise the Qubes firewall.

If you adopt this model, you should be aware that all traffic will arrive at the network service qube appearing to originate from the IP address of sys-firewall-2.

For the VPN service please also look at the VPN documentation.

Enabling networking between two qubes

Normally any networking traffic between qubes is prohibited for security reasons. However, in special situations, you might want to selectively allow specific qubes to establish networking connectivity between each other. For example, this might be useful in some development work, when you want to test networking code, or to allow file exchange between HVM domains (which do not have Qubes tools installed) via SMB/scp/NFS protocols.

In order to allow networking between qubes A and B follow these steps:

• Make sure both A and B are connected to the same firewall vm (by default all VMs use the same firewall VM).
• Note the Qubes IP addresses assigned to both qubes. This can be done using the qvm-ls -n command, or via the Qubes Manager preferences pane for each qube.
• Start both qubes, and also open a terminal in the firewall VM
• In the firewall VM's terminal enter the following iptables rule:

sudo iptables -I FORWARD 2 -s <IP address of A> -d <IP address of B> -j ACCEPT

• In qube B's terminal enter the following iptables rule:

sudo iptables -I INPUT -s <IP address of A> -j ACCEPT

• Now you should be able to reach B from A -- test it using e.g. ping issued from A. Note however, that this doesn't allow you to reach A from B -- for this you would need two more rules, with A and B swapped.
• If everything works as expected, then you should write the above iptables rules into firewallVM's qubes-firewall-user-script script. This script is run when the netvm starts up. You should also write relevant rules in A and B's rc.local script which is run when the qube is launched. Here's an example how to update the script:

[user@sys-firewall ~]$ sudo bash
[root@sys-firewall user]# echo "iptables -I FORWARD 2 -s 10.137.2.25 -d 10.137.2.6 -j ACCEPT" >> /rw/config/qubes-firewall-user-script
[root@sys-firewall user]# chmod +x /rw/config/qubes-firewall-user-script

• Here is an example how to update rc.local:

[user@B ~]$ sudo bash
[root@B user]# echo "iptables -I INPUT -s 10.137.2.25 -j ACCEPT" >> /rw/config/rc.local
[root@B user]# chmod +x /rw/config/rc.local

Opening a single TCP port to other network-isolated qube

In the case where a specific TCP port needs to be exposed from a qubes to another one, you do not need to enable networking between them but you can use the qubes RPC service qubes.ConnectTCP.

1. Simple port binding

Consider the following example. mytcp-service qube has a TCP service running on port 444 and untrusted qube needs to access this service.

• In dom0, add the following to /etc/qubes-rpc/policy/qubes.ConnectTCP:

  untrusted @default allow,target=mytcp-service
  

• In untrusted, use the Qubes tool qvm-connect-tcp:

  [user@untrusted #]$ qvm-connect-tcp 444:@default:444
  

Note: The syntax is the same as SSH tunnel handler. The first 444 correspond to the localport destination of untrusted, @default the remote machine and the second 444 to the remote machine port.

The service of mytcp-service running on port 444 is now accessible in untrusted as localhost:444.

Here @default is used to hide the destination qube which is specified in the Qubes RPC policy by target=mytcp-service. Equivalent call is to use the tool as follow:

  [user@untrusted #]$ qvm-connect-tcp ::444

which means to use default local port of unstrusted as the same of the remote port and unspecified destination qube is @default by default in qrexec call.

2. Binding remote port on another local port

Consider now the case where someone prefers to specify the destination qube and use another port in untrusted,for example 10044. Instead of previous case, add

untrusted mytcp-service allow

in /etc/qubes-rpc/policy/qubes.ConnectTCP and in untrusted, use the tool as follow:

  [user@untrusted #]$ qvm-connect-tcp 10444:mytcp-service:444

The service of mytcp-service running on port 444 is now accessible in untrusted as localhost:10444.

3. Binding to different qubes using RPC policies

One can go further than the previous examples by redirecting different ports to different qubes. For example, let assume that another qube mytcp-service-bis with a TCP service is running on port 445. If someone wants untrusted to be able to reach this service but port 445 is reserved to mytcp-service-bis then, in dom0, add the following to /etc/qubes-rpc/policy/qubes.ConnectTCP+445:

untrusted @default allow,target=mytcp-service-bis

In that case, calling qvm-connect-tcp like previous examples, will still bind TCP port 444 of mytcp-service to untrusted but now, calling it with port 445

  [user@untrusted #]$ qvm-connect-tcp ::445

will restrict the binding to only the corresponding TCP port of mytcp-service-bis.

4. Permanent port binding

For creating a permanent port bind between two qubes, systemd can be used. We use the case of the first example. In /rw/config (or any place you find suitable) of qube untrusted, create my-tcp-service.socket with content:

[Unit]
Description=my-tcp-service

[Socket]
ListenStream=127.0.0.1:444
Accept=true

[Install]
WantedBy=sockets.target

and my-tcp-service@.service with content:

[Unit]
Description=my-tcp-service

[Service]
ExecStart=qrexec-client-vm '' qubes.ConnectTCP+444
StandardInput=socket
StandardOutput=inherit

In /rw/config/rc.local, append the lines:

cp -r /rw/config/my-tcp-service.socket /rw/config/my-tcp-service@.service /lib/systemd/system/
systemctl daemon-reload
systemctl start my-tcp-service.socket

When the qube unstrusted has started (after a first reboot), you can directly access the service of mytcp-service running on port 444 as localhost:444.

Port forwarding to a qube from the outside world

In order to allow a service present in a qube to be exposed to the outside world in the default setup (where the qube has sys-firewall as network VM, which in turn has sys-net as network VM) the following needs to be done:

• In the sys-net VM:
  • Route packets from the outside world to the sys-firewall VM
  • Allow packets through the sys-net VM firewall
• In the sys-firewall VM:
  • Route packets from the sys-net VM to the VM
  • Allow packets through the sys-firewall VM firewall
• In the qube:
  • Allow packets through the qube firewall to reach the service

As an example we can take the use case of a web server listening on port 443 that we want to expose on our physical interface eth0, but only to our local network 192.168.x.0/24.

Note: To have all interfaces available and configured, make sure the 3 qubes are up and running

Note: Issue #4028 discusses adding a command to automate exposing the port.

1. Identify the IP addresses you will need to use for sys-net, sys-firewall and the destination qube.

You can get this information from the Settings Window for the qube, or by running this command in each qube: ifconfig | grep -i cast Note the IP addresses you will need.

Note: The vifx.0 interface is the one used by qubes connected to this netvm so it is not an outside world interface.

2. Route packets from the outside world to the FirewallVM

In the sys-net VM's Terminal, code a natting firewall rule to route traffic on the outside interface for the service to the sys-firewall VM

iptables -t nat -A PREROUTING -i eth0 -p tcp --dport 443 -d 192.168.x.x -j DNAT --to-destination 10.137.1.x

Code the appropriate new filtering firewall rule to allow new connections for the service

iptables -I FORWARD 2 -i eth0 -d 10.137.1.x -p tcp --dport 443 -m conntrack --ctstate NEW -j ACCEPT

If you want to expose the service on multiple interfaces, repeat the steps described in part 1 for each interface. In Qubes R4, at the moment (QubesOS/qubes-issues#3644), nftables is also used which imply that additional rules need to be set in a qubes-firewall nft table with a forward chain.

nft add rule ip qubes-firewall forward meta iifname eth0 ip daddr 10.137.0.x tcp dport 443 ct state new counter accept

Verify you are cutting through the sys-net VM firewall by looking at its counters (column 2)

iptables -t nat -L -v -n
iptables -L -v -n

Note: On Qubes R4, you can also check the nft counters

nft list table ip qubes-firewall

Send a test packet by trying to connect to the service from an external device

telnet 192.168.x.x 443

Once you have confirmed that the counters increase, store these command in /rw/config/rc.local so they get set on sys-net start-up

sudo nano /rw/config/rc.local

#!/bin/sh


####################
# My service routing

# Create a new firewall natting chain for my service
if iptables -w -t nat -N MY-HTTPS; then

# Add a natting rule if it did not exit (to avoid cluter if script executed multiple times)
  iptables -w -t nat -A MY-HTTPS -j DNAT --to-destination 10.137.1.x

fi


# If no prerouting rule exist for my service
if ! iptables -w -t nat -n -L PREROUTING | grep --quiet MY-HTTPS; then

# add a natting rule for the traffic (same reason)
  iptables -w -t nat -A PREROUTING -i eth0 -p tcp --dport 443 -d 192.168.0.x -j MY-HTTPS
fi


######################
# My service filtering

# Create a new firewall filtering chain for my service
if iptables -w -N MY-HTTPS; then

# Add a filtering rule if it did not exit (to avoid cluter if script executed multiple times)
  iptables -w -A MY-HTTPS -s 192.168.x.0/24 -j ACCEPT

fi

# If no forward rule exist for my service
if ! iptables -w -n -L FORWARD | grep --quiet MY-HTTPS; then

# add a forward rule for the traffic (same reason)
  iptables -w -I FORWARD 2 -d 10.137.1.x -p tcp --dport 443 -m conntrack --ctstate NEW -j MY-HTTPS

fi

Note: Again in R4 the following needs to be added:

#############
# In Qubes R4

# If not already present
if nft -nn list table ip qubes-firewall | grep "tcp dport 443 ct state new"; then

# Add a filtering rule
  nft add rule ip qubes-firewall forward meta iifname eth0 ip daddr 10.137.0.x tcp dport 443 ct state new counter accept

fi

3. Route packets from the FirewallVM to the VM

In the sys-firewall VM's Terminal, code a natting firewall rule to route traffic on its outside interface for the service to the qube

iptables -t nat -A PREROUTING -i eth0 -p tcp --dport 443 -d 10.137.1.x -j DNAT --to-destination 10.137.2.y

Code the appropriate new filtering firewall rule to allow new connections for the service

iptables -I FORWARD 2 -i eth0 -s 192.168.x.0/24 -d 10.137.2.y -p tcp --dport 443 -m conntrack --ctstate NEW -j ACCEPT

Note: If you do not wish to limit the IP addresses connecting to the service, remove the -s 192.168.0.1/24

Note: On Qubes R4

nft add rule ip qubes-firewall forward meta iifname eth0 ip saddr 192.168.x.0/24 ip daddr 10.137.0.y tcp dport 443 ct state new counter accept

Once you have confirmed that the counters increase, store these command in /rw/config/qubes-firewall-user-script

sudo nano /rw/config/qubes-firewall-user-script

#!/bin/sh


####################
# My service routing

# Create a new firewall natting chain for my service
if iptables -w -t nat -N MY-HTTPS; then

# Add a natting rule if it did not exit (to avoid cluter if script executed multiple times)
  iptables -w -t nat -A MY-HTTPS -j DNAT --to-destination 10.137.2.y

fi


# If no prerouting rule exist for my service
if ! iptables -w -t nat -n -L PREROUTING | grep --quiet MY-HTTPS; then

# add a natting rule for the traffic (same reason)
  iptables -w -t nat -A PREROUTING -i eth0 -p tcp --dport 443 -d 10.137.1.x -j MY-HTTPS
fi


######################
# My service filtering

# Create a new firewall filtering chain for my service
if iptables -w -N MY-HTTPS; then

# Add a filtering rule if it did not exit (to avoid cluter if script executed multiple times)
  iptables -w -A MY-HTTPS -s 192.168.x.0/24 -j ACCEPT

fi

# If no forward rule exist for my service
if ! iptables -w -n -L FORWARD | grep --quiet MY-HTTPS; then

# add a forward rule for the traffic (same reason)
  iptables -w -I FORWARD 4 -d 10.137.2.y -p tcp --dport 443 -m conntrack --ctstate NEW -j MY-HTTPS

fi

################
# In Qubes OS R4

# If not already present
if ! nft -nn list table ip qubes-firewall | grep "tcp dport 443 ct state new"; then

# Add a filtering rule
  nft add rule ip qubes-firewall forward meta iifname eth0 ip saddr 192.168.x.0/24 ip daddr 10.137.0.y tcp dport 443 ct state new counter accept

fi

Finally make this file executable (so it runs at every Firewall VM update)

sudo chmod +x /rw/config/qubes-firewall-user-script

4. Allow packets into the qube to reach the service

Here no routing is required, only filtering. Proceed in the same way as above but store the filtering rule in the /rw/config/rc.local script.

sudo name /rw/config/rc.local

######################
# My service filtering

# Create a new firewall filtering chain for my service
if iptables -w -N MY-HTTPS; then

# Add a filtering rule if it did not exit (to avoid cluter if script executed multiple times)
  iptables -w -A MY-HTTPS -j ACCEPT

fi

# If no input rule exists for my service
if ! iptables -w -n -L INPUT | grep --quiet MY-HTTPS; then

# add a forward rule for the traffic (same reason)
  iptables -w -I INPUT 5 -d 10.137.2.x -p tcp --dport 443 -m conntrack --ctstate NEW -j MY-HTTPS

fi

This time testing should allow connectivity to the service as long as the service is up :-)

Where to put firewall rules

Implicit in the above example scripts, but worth calling attention to: for all qubes except those supplying networking, iptables commands should be added to the /rw/config/rc.local script. For app qubes supplying networking (sys-firewall inclusive), iptables commands should be added to /rw/config/qubes-firewall-user-script.

Firewall troubleshooting

Firewall logs are stored in the systemd journal of the qube the firewall is running in (probably sys-firewall). You can view them by running sudo journalctl -u qubes-firewall.service in the relevant qube. Sometimes these logs can contain useful information about errors that are preventing the firewall from behaving as you would expect.