qubes-doc/common-tasks/usb.md

layout	title	permalink	redirect_from
doc	Using and Managing USB Devices	/doc/usb/	/doc/stick-mounting/ /en/doc/stick-mounting/ /doc/StickMounting/ /wiki/StickMounting/ /doc/usbvm/ /en/doc/usbvm/ /doc/USBVM/ /wiki/USBVM/ /doc/sys-usb/

Using and Managing USB Devices

Creating and Using a USB qube

The connection of an untrusted USB device to dom0 is a security risk since dom0, like almost every OS, reads partition tables automatically and since the whole USB stack is put to work to parse the data presented by the USB device in order to determine if it is a USB mass storage device, to read its configuration, etc. This happens even if the drive is then assigned and mounted in another qube.

To avoid this risk, it is possible to prepare and utilize a USB qube.

A USB qube acts as a secure handler for potentially malicious USB devices, preventing them from coming into contact with dom0 (which could otherwise be fatal to the security of the whole system). With a USB qube, every time you connect an untrusted USB drive to a USB port managed by that USB controller, you will have to attach it to the qube in which you wish to use it (if different from the USB qube itself), either by using Qubes VM Manager or the command line (see instructions above). You can create a USB qube using the management stack by performing the following steps as root in dom0:

1. Enable sys-usb:

   qubesctl top.enable qvm.sys-usb
   

2. Apply the configuration:

   qubesctl state.highstate
   

Alternatively, you can create a USB qube manually as follows:

1. Read the Assigning Devices page to learn how to list and identify your USB controllers. Carefully check whether you have a USB controller that would be appropriate to assign to a USB qube. Note that it should be free of input devices, programmable devices, and any other devices that must be directly available to dom0. If you find a free controller, note its name and proceed to step 2.

2. Create a new qube. Give it an appropriate name and color label (recommended: sys-usb, red). If you need to attach a networking device, it might make sense to create a NetVM. If not, an AppVM might make more sense. (The default sys-usb is a NetVM.)

3. In the qube's settings, go to the "Devices" tab. Find the USB controller that you identified in step 1 in the "Available" list. Move it to the "Selected" list.

   Caution: By assigning a USB controller to a USB qube, it will no longer be available to dom0. This can make your system unusable if, for example, you have only one USB controller, and you are running Qubes off of a USB drive.

4. Click "OK." Restart the qube.

5. Recommended: Check the box on the "Basic" tab which says "Start VM automatically on boot." (This will help to mitigate attacks in which someone forces your system to reboot, then plugs in a malicious USB device.)

If the USB qube will not start, see here.

How to hide all USB controllers from dom0

If you create a USB qube manually, there will be a brief period of time during the boot process during which dom0 will be exposed to your USB controllers (and any attached devices). This is a potential security risk, since even brief exposure to a malicious USB device could result in dom0 being compromised. There are two approaches to this problem:

1. Physically disconnect all USB devices whenever you reboot the host.
2. Hide (i.e., blacklist) all USB controllers from dom0.

Warning: If you use a USB AEM device, do not use the second option. Using a USB AEM device requires dom0 to have access to the USB controller to which your USB AEM device is attached. If dom0 cannot read your USB AEM device, AEM will hang.

The procedure to hide all USB controllers from dom0 is as follows:

1. Open the file /etc/default/grub in dom0.
2. Find the line that begins with GRUB_CMDLINE_LINUX.
3. Add rd.qubes.hide_all_usb to that line.
4. Save and close the file.
5. Run the command grub2-mkconfig -o /boot/grub2/grub.cfg in dom0.
6. Reboot.

(Note: Beginning with R3.2, rd.qubes.hide_all_usb is set automatically if you opt to create a USB qube during installation. This also occurs automatically if you choose to create a USB qube using the qubesctl method, which is the first pair of steps in the linked section.)

Warning USB keyboard cannot be used to type the disk passphrase if USB controllers were hidden from dom0. Before hiding USB controllers make sure your laptop keyboard is not internally connected via USB (by checking output of lsusb command) or that you have a PS/2 keyboard at hand (if using a desktop PC). Failure to do so will render your system unusable.

Removing a USB qube

Warning: This procedure will result in your USB controller(s) being attached directly to dom0.

1. Shut down the USB qube.
2. In Qubes Manager, right-click on the USB qube and select "Remove VM."
3. Open the file /etc/default/grub in dom0.
4. Find the line(s) that begins with GRUB_CMDLINE_LINUX.
5. If rd.qubes.hide_all_usb appears anywhere in those lines, remove it.
6. Save and close the file.
7. Run the command grub2-mkconfig -o /boot/grub2/grub.cfg in dom0.
8. Reboot.

Security Warning about USB Input Devices

Important security warning. Please read this section carefully!

If you connect USB input devices (keyboard and mouse) to a VM, that VM will effectively have control over your system. Because of this, the benefits of using a USB qube are much smaller than using a fully untrusted USB qube. In addition to having control over your system, such VM can also sniff all the input your enter there (for example, passwords in the case of a USB keyboard).

There is no simple way to protect against sniffing, but you can make it harder to exploit control over input devices.

If you have only a USB mouse connected to a USB qube, but the keyboard is connected directly to dom0 (using a PS/2 connector, for example), you simply need to lock the screen when you are away from your computer. You must do this every time you leave your computer unattended, even if there no risk of anyone else having direct physical access to your computer. This is because you are guarding the system not only against anyone with local access, but also against possible actions from a potentially compromised USB qube.

If your keyboard is also connected to a USB qube, things are much harder. Locking the screen (with a traditional password) does not solve the problem, because the USB qube can simply sniff this password and later easily unlock the screen. One possibility is to set up the screen locker to require an additional step to unlock (i.e., two-factor authentication). One way to achieve this is to use a YubiKey, or some other hardware token, or even to manually enter a one-time password.

How to use a USB keyboard

Caution: Please carefully read the Security Warning about USB Input Devices before proceeding.

In order to use a USB keyboard, you must first attach it to a USB qube, then give that qube permission to pass keyboard input to dom0. Edit the qubes.InputKeyboard policy file in dom0, which is located here:

/etc/qubes-rpc/policy/qubes.InputKeyboard

Add a line like this one to the top of the file:

sys-usb dom0 ask,user=root

(Change sys-usb to your desired USB qube.)

You can now use your USB keyboard.

How to use a USB mouse

Caution: Please carefully read the Security Warning about USB Input Devices before proceeding.

In order to use a USB mouse, you must first attach it to a USB qube, then give that qube permission to pass mouse input to dom0. Edit the qubes.InputMouse policy file in dom0, which is located here:

/etc/qubes-rpc/policy/qubes.InputMouse

Add a line like this to the op of the file:

sys-usb dom0 ask,user=root

(Change sys-usb to your desired USB qube.)

You can now use your USB mouse.

How to attach USB drives

(Note: In the present context, the term "USB drive" denotes any USB mass storage device. In addition to smaller flash memory sticks, this includes things like USB external hard drives.)

Qubes OS supports the ability to attach a USB drive (or just one or more of its partitions) to any qube easily, no matter which qube actually handles the USB controller. (The USB controller may be assigned on the Devices tab of a qube's settings page in Qubes VM Manager or by using the qvm-pci command. For guidance on finding the correct USB controller, see here.)

USB drive mounting is integrated into the Qubes VM Manager GUI. Simply insert your USB drive, right-click on the desired qube in the Qubes VM Manager list, click Attach/detach block devices, and select your desired action and device. This, however, only works for the whole device. If you would like to attach individual partitions, you must use the command-line tool.

The command-line tool you may use to mount whole USB drives or their partitions is qvm-block. This tool can be used to assign a USB drive to a qube as follows:

1. Insert your USB drive.

2. In a dom0 console (running as a normal user), list all available block devices:

   qvm-block -l
   

   This will list all available block devices connected to any USB controller in your system, no matter which qube hosts the controller. The name of the qube hosting the USB controller is displayed before the colon in the device name. The string after the colon is the name of the device used within the qube, like so:

   dom0:sdb1     Cruzer () 4GiB
   
   usbVM:sdb1    Disk () 2GiB
   

   Note: If your device is not listed here, you may refresh the list by calling (from the qube to which the device is connected):

   sudo udevadm trigger --action=change
   

3. Assuming your USB drive is attached to dom0 and is sdb, we attach the device to a qube with the name personal like so:

   qvm-block -a personal dom0:sdb
   

   This will attach the device to the qube as /dev/xvdi if that name is not already taken by another attached device, or /dev/xvdj, etc.

   You may also mount one partition at a time by using the same command with the partition number after sdb.

   Warning: when working with single partitions, it is possible to assign the same partition to multiple qubes. For example, you could attach sdb1 to qube1 and then sdb to qube2. It is up to the user not to make this mistake. The Xen block device framework currently does not provide an easy way around this. Point 2 of this comment on issue 1072 gives details about this.

4. The USB drive is now attached to the qube. If using a default qube, you may open the Nautilus file manager in the qube, and your drive should be visible in the Devices panel on the left.

5. When you finish using your USB drive, click the eject button or right-click and select Unmount.

6. In a dom0 console, detach the stick

   qvm-block -d <device>
   

   or

   qvm-block -d <vmname>
   

7. You may now remove the device.

Warning: Do not remove the device before detaching it from the VM! Otherwise, you will not be able to attach it anywhere later. See issue 1082 for details.

If the device does not appear in Nautilus, you will need to mount it manually. The device will show up as /dev/xvdi (or /dev/xvdj if there is already one device attached -- if two, /dev/xvdk, and so on).

What if I removed the device before detaching it from the VM?

Currently (until issue 1082 gets implemented), if you remove the device before detaching it from the qube, Qubes OS (more precisely, libvirtd) will think that the device is still attached to the qube and will not allow attaching further devices under the same name. The easiest way to recover from such a situation is to reboot the qube to which the device was attached, but if this isn't an option, you can manually recover from the situation by following these steps:

1. Physically connect the device back. You can use any device as long as it will be detected under the same name (for example, sdb).

2. Attach the device manually to the same VM using the xl block-attach command. It is important to use the same "frontend" device name (by default, xvdi). You can get it from the qvm-block listing:

   [user@dom0 ~]$ qvm-block
   sys-usb:sda DataTraveler_2.0 () 246 MiB (attached to 'testvm' as 'xvdi')
   [user@dom0 ~]$ xl block-attach testvm phy:/dev/sda backend=sys-usb xvdi
   

   In above example, all xl block-attach parameters can be deduced from the output of qvm-block. In order:

   • testvm - name of target qube to which device was attached - listed in brackets by qvm-block command
   • phy:/dev/sda - physical path at which device appears in source qube (just after source qube name in qvm-block output)
   • backend=sys-usb - name of source qube, can be omitted in case of dom0
   • xvdi - "frontend" device name (listed at the end of line in qvm-block output)

3. Now properly detach the device, either using Qubes VM Manager or the qvm-block -d command.

Attaching a single USB device to a qube (USB passthrough)

Stating with Qubes 3.2, it is possible to attach a single USB device to any Qube. While this is useful feature, it should be used with care, because there are many security implications from using USB devices and USB passthrough will expose your target qube for most of them. If possible, use method specific for particular device type (for example block devices described above), instead of this generic one.

To use this feature, you need to install qubes-usb-proxy package in the templates used for USB qube and qubes you want to connect USB devices to. Note you cannot pass through devices from dom0 (in other words: USB VM is required).

Listing available USB devices:

[user@dom0 ~]$ qvm-usb
sys-usb:2-4     04ca:300d 04ca_300d
sys-usb:2-5     058f:3822 058f_USB_2.0_Camera
sys-usb:2-1     03f0:0641 PixArt_HP_X1200_USB_Optical_Mouse

Attaching selected USB device:

[user@dom0 ~]$ qvm-usb -a conferences sys-usb:2-5
[user@dom0 ~]$ qvm-usb
conferences:2-1 058f:3822 058f_USB_2.0_Camera
sys-usb:2-4     04ca:300d 04ca_300d
sys-usb:2-5     058f:3822 058f_USB_2.0_Camera (attached to conferences)
sys-usb:2-1     03f0:0641 PixArt_HP_X1200_USB_Optical_Mouse

Now, you can use your USB device (camera in this case) in conferences qube.

When you finish, detach the device:

[user@dom0 ~]$ qvm-usb -d sys-usb:2-5
[user@dom0 ~]$ qvm-usb
sys-usb:2-4     04ca:300d 04ca_300d
sys-usb:2-5     058f:3822 058f_USB_2.0_Camera
sys-usb:2-1     03f0:0641 PixArt_HP_X1200_USB_Optical_Mouse

This feature is not yet available in Qubes Manager however, if you would like to contribute to Qubes OS project by implementing it and are a student please consider applying for the Google Summer of Code scholarship and choosing QubesOS Project as a mentor organization. You can find list of our our Project Ideas here.