mirror of
https://github.com/QubesOS/qubes-doc.git
synced 2024-10-01 01:25:40 -04:00
105 lines
5.0 KiB
Markdown
105 lines
5.0 KiB
Markdown
---
|
|
layout: doc
|
|
title: Upgrading to R4.0
|
|
permalink: /doc/upgrade-to-r4.0/
|
|
redirect_from:
|
|
- /en/doc/upgrade-to-r4.0/
|
|
- /doc/UpgradeToR4.0/
|
|
- /doc/UpgradeToR4.0rc1/
|
|
---
|
|
|
|
Upgrading Qubes R3.2 to R4.0
|
|
============================
|
|
|
|
**Before attempting either an in-place upgrade or a clean installation, we strongly recommend that users [back up their systems](/doc/backup-restore/).**
|
|
|
|
Current Qubes R3.2 systems cannot be upgraded in-place to R4.0.
|
|
A full backup, clean 4.0 install, and restore is required.
|
|
This can be done by following the procedure below.
|
|
|
|
|
|
Preparation
|
|
-----------
|
|
|
|
1. Go to [downloads](/downloads/) and prepare a USB drive or DVD with the R4.0 installer.
|
|
|
|
2. If this is your only computer, and you do not have a R3.2 installer, you should also create a separate R3.2 USB drive or DVD installer at this time.
|
|
|
|
|
|
Backup R3.2
|
|
-----------
|
|
|
|
1. Attach the backup drive you will be using.
|
|
These steps assume it is a USB drive.
|
|
|
|
2. Shutdown all non-essential VMs.
|
|
Typically, `sys-usb` will be the only VM you need to leave running.
|
|
|
|
3. Follow the **Creating a Backup** section in the [Backup, Restoration, and Migration](/doc/backup-restore/) guide to back up **all VMs** except sys-usb.
|
|
|
|
6. Verify the integrity of your backup by following the **Restoring from a Backup** section in the [Backup, Restoration, and Migration](/doc/backup-restore/) guide and:
|
|
|
|
* If you're using Qubes Manager, check the box under "Restore options" that says, "Verify backup integrity, do not restore the data."
|
|
* If you're using `qvm-backup-restore` from the command-line, use the `--verify-only` option.
|
|
|
|
7. If your backup verifies successfully, proceed to the next section.
|
|
If it does not, **stop**.
|
|
Go back and repeat the backup steps, review the documentation or search the qubes-users mailing list, or ask for assistance on the [qubes-users mailing list](/mailing-lists/#qubes-users) or IRC.
|
|
|
|
|
|
Install R4.0
|
|
------------
|
|
|
|
This section provides general guidance on installing R4.0 as part of migrating from R3.2.
|
|
For further details, please see the [installation guide](/doc/installation-guide/).
|
|
|
|
1. Shut down R3.2 and boot the R4.0 installer.
|
|
|
|
2. Follow the installation prompts until you get to the drive selection screen.
|
|
Choose **I want to make additional space available**.
|
|
Select the box at the top of the list in order to select all partitions.
|
|
**This will erase the entire drive**, so do this only if Qubes is the only OS installed on your computer.
|
|
If you did not successfully verify your backup in the previous section, cancel the installation, and go back to do that now.
|
|
|
|
3. Complete the R4.0 installation.
|
|
Ask for assistance on the [qubes-users mailing list](/mailing-lists/#qubes-users) if you run into trouble.
|
|
|
|
4. If you are unable to successfully install R4.0 on your system, all is not lost.
|
|
Use the R3.2 installer to reinstall R3.2, then restore from your backup.
|
|
|
|
|
|
Restore from your backup
|
|
------------------------
|
|
|
|
1. Welcome to Qubes R4.0!
|
|
The first thing you might notice is that **Qubes Manager** is not started by default.
|
|
We won't need it for the next step, but we will be starting it later.
|
|
|
|
2. Since patches may have been released since your installation image was created, update Qubes R4.0 by going to the dom0 command line (**Qubes menu -> Terminal Emulator**) then running:
|
|
|
|
sudo qubes-dom0-update
|
|
|
|
3. Reboot dom0.
|
|
|
|
4. Go to **Qubes menu -> System Tools -> Qubes Manager** to start it.
|
|
|
|
5. Follow the **Restoring from a Backup** section in the [Backup, Restoration, and Migration](/doc/backup-restore/) guide.
|
|
We recommend that you restore only your [TemplateBasedVMs](/doc/glossary/#templatebasedvm) and [StandaloneVMs](/doc/glossary/#standalonevm) from R3.2.
|
|
Using [TemplateVMs](/doc/templates/) and [SystemVMs](/doc/glossary/#systemvm) from R3.2 is not fully supported (see [#3514](https://github.com/QubesOS/qubes-issues/issues/3514)).
|
|
Instead, we recommend using the TemplateVMs that were created specifically for R4.0, which you can [customize](/doc/software-update-vm/) according to your needs.
|
|
For the TemplateVM OS versions supported in R4.0, see [Supported Versions](/doc/supported-versions/#templatevms).
|
|
If the restore tool complains about missing templates, you can select the option to restore the AppVMs anyway, then change them afterward to use one of the default R4.0 templates.
|
|
|
|
|
|
Upgrade all Template and Standalone VM(s)
|
|
-----------------------------------------
|
|
|
|
We strongly recommend that you update **all** TemplateVMs and StandaloneVMs before use so that you have the latest security patches from upstream distributions.
|
|
In addition, if the default templates have reached EOL (end-of-life) by the time you install R4.0, we strongly recommend that you upgrade them before use.
|
|
Please see [Supported Versions](/doc/supported-versions/) for information on supported OS versions and consult the guides below for specific upgrade instructions:
|
|
|
|
* [Upgrading Fedora TemplateVMs](/doc/templates/fedora/#upgrading)
|
|
* [Upgrading Debian TemplateVMs](/doc/templates/debian/#upgrading)
|
|
* [Updating Whonix TemplateVMs](/doc/whonix/update/)
|
|
|