mirror of
https://github.com/QubesOS/qubes-doc.git
synced 2024-12-29 01:06:24 -05:00
142 lines
3.8 KiB
Markdown
142 lines
3.8 KiB
Markdown
---
|
||
layout: doc
|
||
title: Apple MacBook Troubleshooting
|
||
permalink: /doc/macbook-troubleshooting/
|
||
---
|
||
|
||
Apple MacBook Troubleshooting
|
||
=============================
|
||
|
||
MacBook Air 13" mid 2011 (MacBookAir 4,2)
|
||
-----------------------------------------
|
||
|
||
In this section, I explain how to install Qubes on a MacBook Air 13" mid 2011
|
||
(MacBookAir 4,2).
|
||
|
||
This model has the following features:
|
||
|
||
* Dual Intel i7-2677M 1.80 Ghz CPU (2 dual cores)
|
||
* Intel HD Graphics 3000
|
||
* 4Gb RAM
|
||
* 256Gb SDD
|
||
* Broadcom BCM43224 802.11 a/b/g/n wifi and Bluetooth adapter
|
||
* Intel DSL2310 Thunderbolt controller
|
||
* It has 1 DVI/Thunderbolt display port, 2 USB2.0 ports, a Magsafe power
|
||
adapter, a standard 3.5mm audio jack and SD reader.
|
||
|
||
I first tried to install Qubes using the UEFI boot, but it failed. Not wanting
|
||
to waste too much time, I quickly opted for the legacy BIOS install.
|
||
|
||
### 1. Boot from Mac OS X (or Internet Recovery Image with `CMD`+`R` during bootup)
|
||
|
||
Run in a terminal [[1]]:
|
||
|
||
~~~
|
||
# diskutil list
|
||
(find your usb device)
|
||
# bless –device /dev/diskX –legacy –setBoot –nextonly # bless the disk not the partition
|
||
# reboot
|
||
~~~
|
||
|
||
Insert your Qubes 3.2 USB flash drive. The ISOLINUX boot screen should come up.
|
||
Install Qubes normally.
|
||
|
||
If you try to boot Qubes now, it will freeze while "setting up networking." You
|
||
need to put the Broadcom wireless device into PCI passtrough [[2],[3]]. Or, as
|
||
an alternative [remove it from your Mac][bluetooth-replacement] and Qubes will
|
||
boot up smoothly. If you choose to remove the card, jump to step 3.
|
||
|
||
### 2. Boot from Mac OS X again
|
||
|
||
Run in a terminal:
|
||
|
||
~~~
|
||
# diskutil list
|
||
(find your usb device)
|
||
# bless –device /dev/diskX –legacy –setBoot –nextonly # bless the disk not the partition
|
||
# reboot
|
||
~~~
|
||
|
||
Insert your Qubes 3.2 USB flash drive. The ISOLINUX boot screen should come up.
|
||
Select Troubleshooting and Boot the Rescue image. Enter your disk password when
|
||
prompted. Select continue and after mounting the HD filesystem and launching a
|
||
shell, `chroot` as instructed.
|
||
|
||
Then find your Bluetooth card:
|
||
|
||
~~~
|
||
# lspci
|
||
..
|
||
02:00.0 Network controller: Broadcom Corporation BCM43224 802.11a/b/g/n (rev 01)
|
||
…
|
||
# qvm-pci -a sys-net 02:00.0 # this assigns the device to sys-net VM
|
||
~~~
|
||
|
||
Then create `/etc/systemd/system/qubes-pre-netvm.service` with:
|
||
|
||
~~~
|
||
[Unit]
|
||
Description=Netvm fix for Broadcom
|
||
Before=qubes-netvm.service
|
||
|
||
[Service]
|
||
ExecStart=/bin/sh -c 'echo 02:00.0 > /sys/bus/pci/drivers/pciback/permissive'
|
||
Type=oneshot
|
||
RemainAfterExit=yes
|
||
|
||
[Install]
|
||
WantedBy=multi-user.target
|
||
~~~
|
||
|
||
Run:
|
||
|
||
~~~
|
||
systemctl enable qubes-pre-netvm.service
|
||
~~~
|
||
|
||
And that's it.
|
||
|
||
### 3. After reboot, boot Mac OS X again
|
||
|
||
Run in a terminal:
|
||
|
||
~~~
|
||
# diskutil list
|
||
(find the HD device where you installed Qubes)
|
||
# bless –device /dev/diskX –legacy –setBoot # bless the disk not the partition
|
||
# reboot
|
||
~~~
|
||
|
||
Results:
|
||
|
||
* System booted and running smoothly
|
||
* Youtube video: OK (including full screen after configuration)
|
||
* Trackpad: OK
|
||
* Audio control: OK
|
||
* Brightness control: OK
|
||
* Keyboard light control:OK
|
||
* SD card access: OK (tested at dom0)
|
||
* Lid-close suspend: OK
|
||
* Wifi: +10%-20% ICMP packet loss when comparing with OSX (have similar rates
|
||
with tails Linux, more tests are required)
|
||
|
||
### References
|
||
|
||
1. <https://github.com/QubesOS/qubes-issues/issues/794>
|
||
2. <https://github.com/QubesOS/qubes-issues/issues/1261>
|
||
3. <https://www.qubes-os.org/doc/assigning-devices/>
|
||
|
||
|
||
MacBook Air 2012 (MacBookAir 5,1)
|
||
---------------------------------
|
||
|
||
Please see [this thread o the qubes-devel mailing list][macbook-air-2012-5-1].
|
||
|
||
|
||
[1]: https://github.com/QubesOS/qubes-issues/issues/794
|
||
[2]: https://github.com/QubesOS/qubes-issues/issues/1261
|
||
[3]: https://www.qubes-os.org/doc/assigning-devices/
|
||
[bluetooth-replacement]: https://www.ifixit.com/Guide/MacBook+Air+13-Inch+Mid+2011+AirPort-Bluetooth+Card+Replacement/6360
|
||
[macbook-air-2012-5-1]: https://groups.google.com/d/topic/qubes-devel/uLDYGdKk_Dk/discussion
|
||
|