qubes-doc/user/security-in-qubes/yubi-key.md

lang	layout	permalink	redirect_from	ref	title
en	doc	/doc/yubikey/	/doc/yubi-key/ /en/doc/yubi-key/ /doc/YubiKey/	169	YubiKey

"The YubiKey is a hardware authentication device manufactured by Yubico to protect access to computers, networks, and online services that supports one-time passwords (OTP), public-key cryptography, and authentication, and the Universal 2nd Factor (U2F) and FIDO2 protocols[1] developed by the FIDO Alliance." (Wikipedia)

General usage in Qubes OS

Most use cases for the YubiKey can be achieved exactly as described by the manufacturer or other instructions found online. One usually just needs to attach the YubiKey to the corresponding app qube to get the same result (see the documentation on how to use USB devices in Qubes OS accordingly). The recommended way for using CTAP in Qubes is described here.

Multi-factor login for Qubes OS

You can use a YubiKey to enhance the user authentication in Qubes. The following instructions explain how to setup the YubiKey as an additional way to login.

After setting it up, you can login by providing both - a password typed in via keyboard and the YubiKey plugged in. Someone eavesdropping your login attempt would not be able to login by only observing and remembering your password. Stealing your YubiKey would not suffice to login either. Only if an attacker has both, the password and the Yubikey, it would be possible to login (it is thus called Multi-factor authentication).

The following instructions keep your current login password untouched and recommends to define a new, additional password that is used in combination with the YubiKey only. This ensures that you a) do not accidentally lock yourself out during setup and b) you do not need to fear shoulder surfing so much (i.e. by not using your standard login password in public).

Setup login with YubiKey

To use the YubiKey for multi-factor authentication you need to

• install software for the YubiKey,
• configure the YubiKey for the Challenge-Response mode,
• store the password for YubiKey Login and the Challenge-Response secret in dom0,
• enable YubiKey authentication for every service you want to use it for.

All these requirements are described below, step by step.

1. Install YubiKey software in the template on which your USB VM is based. Without this software the challenge-response mechanism is not working.

   For Fedora.

   sudo dnf install ykpers
   

   For Debian.

   sudo apt-get install yubikey-personalization
   

   Shut down your template. Then, either reboot your USB VM (so changes inside the template take effect in your USB app qube) or install the packages inside your USB VM as well if you would like to avoid rebooting it.

2. Install qubes-app-yubikey in dom0. This provides the program to authenticate with password and YubiKey.

   sudo qubes-dom0-update qubes-yubikey-dom0
   

3. Configure your YubiKey for challenge-response HMAC-SHA1 mode. This can be done on any qube, e.g. a disposable (you need to attach the YubiKey to this app qube though) or directly on the sys-usb vm.

   You need to (temporarily) install the package "yubikey-personalization-gui" and run it by typing yubikey-personalization-gui in the command line.

   • In the program go to Challenge-Response,
   • select HMAC-SHA1,
   • choose Configuration Slot 2,
   • optional: enable Require user input (button press) (recommended),
   • use fixed 64 bit input for HMAC-SHA1 mode,
   • insert the YubiKey (if not done already) and make sure that it is attached to the vm,
   • press Write Configuration once you are ready.

   We will refer the Secret Key (20 bytes hex) as AESKEY.

   • It is recommended to keep a backup of your AESKEY in an offline VM used as a vault.
   • Consider keeping a backup of your AESKEY on paper and storing it in a safe place.
   • If you have multiple YubiKeys for backup purposes (in case a yubikey gets lost, stolen or breaks) you can write the same settings into other YubiKeys. You can choose "Program multiple YubiKeys" in the program, make sure to select Same secret for all keys in this case.

4. Paste your AESKEY into /etc/qubes/yk-keys/yk-secret-key.hex in dom0.

5. As mentioned before, you need to define a new password that is only used in combination with the YubiKey. You can write this password in plain text into /etc/qubes/yk-keys/yk-login-pass in dom0. This is considered safe as dom0 is ultimately trusted anyway.

   However, if you prefer you can paste a hashed password instead into /etc/qubes/yk-keys/yk-login-pass-hashed.hex in dom0.

   You can calculate your hashed password using the following two commands. First run the following command to store your password in a temporary variable password. (This way your password will not leak to the terminal command history file.)

   read -r password
   

   Now run the following command to calculate your hashed password.

   echo -n "$password" | openssl dgst -sha1 | cut -f2 -d ' '
   

6. To enable multi-factor authentication for a service, you need to add

   auth include yubikey
   

   to the corresponding service file in /etc/pam.d/ in dom0. This means, if you want to enable the login via YubiKey for xscreensaver (the default screen lock program), you add the line at the beginning of /etc/pam.d/xscreensaver. If you want to use the login for a tty shell, add it to /etc/pam.d/login. Add it to /etc/pam.d/lightdm if you want to enable the login for the default display manager and so on.

   It is important, that auth include yubikey is added at the beginning of these files, otherwise it will most likely not work.

7. Adjust the USB VM name in case you are using something other than the default sys-usb by editing /etc/qubes/yk-keys/yk-vm in dom0.

Usage

When you want to authenticate

1. plug your YubiKey into an USB slot,
2. enter the password associated with the YubiKey,
3. press Enter and
4. press the button of the YubiKey, if you configured the confirmation (it will blink).

When everything is ok, your screen will be unlocked.

In any case you can still use your normal login password, but do it in a secure location where no one can snoop your password.

Optional: Enforce YubiKey Login

Edit /etc/pam.d/yubikey (or appropriate file if you are using other screen locker program) and remove default=ignore so the line looks like this.

auth [success=done] pam_exec.so expose_authtok quiet /usr/bin/yk-auth

Optional: Locking the screen when YubiKey is removed

Look into it You can setup your system to automatically lock the screen when you unplug your YubiKey. This will require creating a simple qrexec service which will expose the ability to lock the screen to your USB VM, and then adding a udev hook to actually call that service.

In dom0:

1. First configure the qrexec service. Create /etc/qubes-rpc/custom.LockScreen with a simple command to lock the screen. In the case of xscreensaver (used in Xfce) it would be:

   DISPLAY=:0 xscreensaver-command -lock
   

2. Then make /etc/qubes-rpc/custom.LockScreen executable.

   sudo chmod +x /etc/qubes-rpc/custom.LockScreen
   

3. Allow your USB VM to call that service. Assuming that it's named sys-usb it would require creating /etc/qubes-rpc/policy/custom.LockScreen with:

   sys-usb dom0 allow
   

In your USB VM:

3. Create udev hook. Store it in /rw/config to have it persist across VM restarts. For example name the file /rw/config/yubikey.rules. Add the following line:

   ACTION=="remove", SUBSYSTEM=="usb", ENV{ID_SECURITY_TOKEN}=="1", RUN+="/usr/bin/qrexec-client-vm dom0 custom.LockScreen"
   

4. Ensure that the udev hook is placed in the right place after VM restart. Append to /rw/config/rc.local:

   ln -s /rw/config/yubikey.rules /etc/udev/rules.d/
   udevadm control --reload
   

5. Then make /rw/config/rc.local executable.

   sudo chmod +x /rw/config/rc.local
   

6. For changes to take effect, you need to call this script manually for the first time.

   sudo /rw/config/rc.local
   

If you use KDE, the command(s) in first step would be different:

# In the case of USB VM being autostarted, it will not have direct access to D-Bus
# session bus, so find its address manually:
kde_pid=`pidof kdeinit4`
export `cat /proc/$kde_pid/environ|grep -ao 'DBUS_SESSION_BUS_ADDRESS=[[:graph:]]*'`
qdbus org.freedesktop.ScreenSaver /ScreenSaver Lock