qubes-doc/managing-os/linux-hvm-tips.md
2016-01-10 18:41:30 -05:00

1.6 KiB

layout title permalink redirect_from
doc Linux HVM Tips /doc/linux-hvm-tips/
/en/doc/linux-hvm-tips/
/doc/LinuxHVMTips/
/wiki/LinuxHVMTips/

Tips for Linux in HVM domain

Screen resolution

Some kernel/Xorg combination use only 640x480 in HVM, which is quite small. To enable maximum resolution, some changes in Xorg configuration are needed:

  1. Force "vesa" video driver
  2. Provide wide horizontal synchronization range

To achieve it (all commands run as root):

  1. Generate XOrg configuration (if you don't have it):

    X -configure :1 && mv ~/xorg.conf.new /etc/X11/xorg.conf
    
  2. Add HorizSync line to Monitor section, it should look something like:

    Section "Monitor"
            Identifier   "Monitor0"
            VendorName   "Monitor Vendor"
            ModelName    "Monitor Model"
            HorizSync    30.0 - 60.0
    EndSection
    
  3. Change driver to "vesa" in Device section:

    Section "Device"
            # (...)
            Identifier  "Card0"
            Driver      "vesa"
            VendorName  "Technical Corp."
            BoardName   "Unknown Board"
            BusID       "PCI:0:2:0"
    EndSection
    

Now you should get at least 1280x1024 and be able to choose other modes.

Qubes agents

Linux Qubes agents are written with PV domain in mind, but it looks to be possible to run them also in HVM domain. However some work is required to achieve it. Check this thread.