mirror of
https://github.com/QubesOS/qubes-doc.git
synced 2024-10-01 01:25:40 -04:00
82 lines
2.4 KiB
Markdown
82 lines
2.4 KiB
Markdown
---
|
||
layout: wiki
|
||
title: AssigningDevices
|
||
permalink: /wiki/AssigningDevices/
|
||
---
|
||
|
||
Assigning Devices to VMs
|
||
========================
|
||
|
||
In order to assign a whole PCI(e) device to a VM, one should use `qvm-pci` tool. E.g.
|
||
|
||
``` {.wiki}
|
||
lspci
|
||
```
|
||
|
||
Find the BDF address of the device you want to assign, and then:
|
||
|
||
``` {.wiki}
|
||
qvm-pci -a <vmname> <bdf>
|
||
```
|
||
|
||
E.g. assuming 00:1a.0 is a BDF of the device I want to assign to the "personal" domain:
|
||
|
||
``` {.wiki}
|
||
qvm-pci -a personal 00:1a.0
|
||
```
|
||
|
||
Note that one can only assign full PCI or PCI Express devices. This means one cannot assign single USB devices -- only the whole USB controller with whatever USB devices connected to it. This limit is imposed by PC and VT-d architecture.
|
||
|
||
Using Qubes Manager
|
||
-------------------
|
||
|
||
TODO
|
||
|
||
\<screenshot\>
|
||
|
||
Finding the right USB controller
|
||
--------------------------------
|
||
|
||
If you want assign certain USB device to a VM (by attaching a whole USB controller), you need to figure out which PCI device is the right controller. First check to which USB bus the device is connected:
|
||
|
||
``` {.wiki}
|
||
lsusb
|
||
```
|
||
|
||
For example I want assign a broadband modem to the netvm. In lsusb output it can be listed as something like this (in this case device isn't fully identified):
|
||
|
||
``` {.wiki}
|
||
Bus 003 Device 003: ID 413c:818d Dell Computer Corp.
|
||
```
|
||
|
||
The device is connected to the USB bus \#3. Then check which other devices are connected to the same bus - all of them will be assigned to the same VM. Now is the time to find right USB controller:
|
||
|
||
``` {.wiki}
|
||
readlink /sys/bus/usb/devices/usb3
|
||
```
|
||
|
||
This should output something like:
|
||
|
||
``` {.wiki}
|
||
../../../devices/pci-0/pci0000:00/0000:00:1a.0/usb3
|
||
```
|
||
|
||
Now you see BDF address in the path (right before final usb3). Strip leading "0000:" and pass the rest to qvm-pci tool:
|
||
|
||
``` {.wiki}
|
||
qvm-pci -a netvm 00:1a.0
|
||
```
|
||
|
||
Possible issues
|
||
---------------
|
||
|
||
VMs with assigned PCI devices in Qubes have allocated a small buffer for DMA operations (called swiotlb). By default it is 2MB, but some devices need a larger buffer. To change this allocation, edit VM's kernel parameters (this is expressed in 512B chunks):
|
||
|
||
``` {.wiki}
|
||
# qvm-prefs netvm |grep kernelopts
|
||
kernelopts : iommu=soft swiotlb=2048 (default)
|
||
# qvm-prefs -s netvm kernelopts "iommu=soft swiotlb=4096"
|
||
```
|
||
|
||
This is [known to be needed](https://groups.google.com/group/qubes-devel/browse_thread/thread/631c4a3a9d1186e3) for Realtek RTL8111DL Gigabit Ethernet Controller.
|