Jared Boone
cff314cbc8
Convince compiler to not inline member constructors.
2016-02-03 19:59:41 -08:00
Jared Boone
ceef8d32d3
Use more accurate arctan for NBFM demodulation.
2016-02-02 16:15:14 -08:00
Jared Boone
ab2c5b256f
Reinstate and slightly tweak NBFM squelch.
2016-02-02 16:08:18 -08:00
Jared Boone
faf0fd6b91
Remove some spurious comments.
2016-01-30 21:11:59 -08:00
Jared Boone
e778be6472
Selection of AM/SSB from application side.
2016-01-30 18:02:28 -08:00
Jared Boone
f2dff16820
Use complex channel filter taps for AM/SSB.
2016-01-30 17:30:54 -08:00
Jared Boone
ad4d7a2e8a
Add SSB demodulator, switch between AM and SSB.
2016-01-30 17:30:03 -08:00
Jared Boone
1915ff980f
Add AM processor decim_2.
2016-01-30 17:28:11 -08:00
Jared Boone
b029bacd8c
Remove channel decimation from AMConfigureMessage.
2016-01-30 17:21:48 -08:00
Jared Boone
220b7b0a6a
Add SSB demodulator.
2016-01-29 22:27:18 -08:00
Jared Boone
a558565886
Further template BlockDecimator by element type, use for audio buffer.
...
Appropriating for use as a buffer accumulator that will save up enough audio samples to put into an audio DMA buffer.
2016-01-29 19:25:08 -08:00
Jared Boone
aead1d8798
Change NBFM audio fs->24k, AM ->12k.
...
Send channel decimation factor from application to baseband.
2016-01-29 19:23:30 -08:00
Jared Boone
28e5b7e4af
Remove some filter constructors, reset Z on configure().
2016-01-29 17:06:22 -08:00
Jared Boone
d984532190
Converging AM, NBFM processors for eventual merging.
2016-01-29 16:18:03 -08:00
Jared Boone
7c65a2d650
Clean up baseband processor statics.
2016-01-29 16:11:00 -08:00
Jared Boone
96898f82b2
Pass IIR configs from application to baseband.
2016-01-29 15:57:20 -08:00
Jared Boone
01e14ecbcf
Move IIR struct and configs to common/.
2016-01-29 15:43:39 -08:00
Jared Boone
db642cac8d
Change audio sampling rates on NBFM, AM modes.
2016-01-29 15:33:01 -08:00
Jared Boone
0e436ded14
Add IIR configs for lower audio sampling rates.
2016-01-29 15:32:32 -08:00
Jared Boone
a2a169352c
Rename existing IIR configs to reflect fs=48k design.
2016-01-29 15:24:31 -08:00
Jared Boone
1aa391bac8
Whoops. Revert to baseband -O3 compiler flag.
...
Was running out of CPU in ERT mode.
2016-01-17 14:08:49 -08:00
Jared Boone
8d2a86a499
Change baseband optimization from -O3 to -O2
...
Significant size benefit with negligable performance effect.
2016-01-16 14:10:22 -08:00
Jared Boone
58e6d26910
Move AudioOutput back to inside audio processor classes.
...
Was wasting precious RAM making it static. I lose 400 bytes of .text, not sure why, but I think the trade is worth it.
2016-01-16 13:56:23 -08:00
Jared Boone
1d0de2240d
Protect/private some ThreadBase implementation details.
2016-01-15 20:25:29 -08:00
Jared Boone
f06d5989db
Move EventDispatcher code out of .hpp.
2016-01-12 22:20:13 -08:00
Jared Boone
731cea1b96
Move event.* code into event_m[04].*.
...
Slightly more duplication of code now. Need a base class...
2016-01-12 22:00:42 -08:00
Jared Boone
e73a9f98a1
Move EventDispatcher code into event_*.hpp.
...
More code redistribution coming shortly...
2016-01-12 21:49:29 -08:00
Jared Boone
b993e3d73e
Consolidate spectrum collector message handling.
2016-01-12 10:32:00 -08:00
Jared Boone
a577bc9664
Refactor naughty static variable hiding in WidebandSpectrum.
2016-01-11 17:18:24 -08:00
Jared Boone
1f3c182b7f
Add missing message handler for wideband spectrum.
...
Spectrum processing was not enabled, and hence wideband spectrum was not being displayed.
2016-01-11 16:31:49 -08:00
Jared Boone
55e3a70fde
Change baseband audio processing pipeline to all floats.
2016-01-11 16:15:42 -08:00
Jared Boone
5e917ebb2c
Cache IIR filter state because compiler *sometimes* doesn't want to.
2016-01-11 15:44:42 -08:00
Jared Boone
e169a46367
Un-static squelch history.
2016-01-11 11:38:33 -08:00
Jared Boone
64966d4539
Fix NaNs coming out of angle_approx_0deg27().
...
Used in FM demodulator, was causing downstream problems when using the floating point values directly.
2016-01-11 11:17:54 -08:00
Jared Boone
5a532f34a7
Remove extra buffer structs/copies.
2016-01-11 09:35:58 -08:00
Jared Boone
877a66ca78
Create AudioOutput singleton, from extracted BasebandProcessor code.
2016-01-10 20:25:24 -08:00
Jared Boone
364217a2b5
Rename IIR filter config variables.
2016-01-10 20:20:07 -08:00
Jared Boone
13d260f936
Add IIR passthrough filter config.
2016-01-10 20:18:12 -08:00
Jared Boone
5dac0bbe49
Squelch special case when threshold == 0, do not squelch.
2016-01-10 20:16:21 -08:00
Jared Boone
01df79641c
Rename squelch algorithm variable for clarity.
...
Helps to understand meaning of threshold.
2016-01-10 20:14:26 -08:00
Jared Boone
6f00687d88
Add configure() for IIR filter.
2016-01-10 20:11:27 -08:00
Jared Boone
497adda390
IIR default constructor passes no audio.
...
Debugging mechanism -- filter must be configured to pass audio.
2016-01-10 20:11:05 -08:00
Jared Boone
172a6da36c
Unconst IIR configuration and filter.
2016-01-10 20:06:58 -08:00
Jared Boone
eb5b2d7d30
Fix broken audio stats when audio is muted.
2016-01-10 11:34:06 -08:00
Jared Boone
4ea84301c6
For non-audio modes, don't bother muting audio.
...
It's assumed base class will start with audio muted.
2016-01-10 11:33:44 -08:00
Jared Boone
d6f797540d
Remove baseband message from queue after it is processed.
...
Application code can now wait on queue empty and know the baseband's state.
2016-01-10 11:15:37 -08:00
Jared Boone
136ba895ef
Clear spectrum FIFO when streaming is stopped.
2016-01-10 11:00:09 -08:00
Jared Boone
62e5ec1dbb
Postpone clearing channel_spectrum_request_update until finished with data in array.
...
There was potential for new samples to be copied into array as the FFT and post-processing were occuring.
2016-01-10 10:45:22 -08:00
Jared Boone
d821afc60d
Spectrum streaming control, spectrum attributes back in each frame.
...
TODO: This feels kinda complex, and there's some repeated Processor code that needs to be refactored into a base class.
2016-01-10 10:42:20 -08:00
Jared Boone
0647f26707
Move SGPIO configuration and control to baseband firmware.
...
Addresses long-standing and annoying bug where SGPIO DMA channel would not disable -- and not configure cleanly next time it was needed. My theory is that the DMA channel couldn't disable until it got a request from the peripheral, and sometimes the peripheral was disabled before that last request.
Anyway, the baseband firmware should control the SGPIO, methinks, despite the impact on baseband code size.
2016-01-10 10:23:39 -08:00