Commit Graph

128 Commits

Author SHA1 Message Date
Erwin Ried
8949662eee Version bump 2020-09-15 22:10:17 +02:00
Erwin Ried
303d9c8a9d Version bump 2020-08-15 16:01:15 +02:00
Erwin Ried
ccef06c088 Margin for footer elements 2020-08-15 15:47:23 +02:00
klockee
90d2dbb49c More cleanup 2020-08-08 04:48:29 -04:00
klockee
b300cc258e Cleaned up and tweaked 2020-08-08 04:24:57 -04:00
klockee
9c9021f63b Added new toolbar in main menu 2020-08-05 01:03:51 -04:00
BuildTools
246e628df8 Added interactive titlebar! 2020-08-01 21:55:09 -04:00
eried
e6c5b3ede5 Version bump 2020-06-28 21:43:22 +02:00
eried
7d5d9054e1 Version bump 2020-06-09 23:44:16 +02:00
eried
934f4b07c4 Speaker option for the H1 2020-06-08 01:23:44 +02:00
Erwin Ried
477635a100 Version bump 2020-05-30 01:42:08 +02:00
Erwin Ried
687b1187d1 Version bump 2020-05-24 23:37:27 +02:00
Erwin Ried
c80ea840d7 Version bump 2020-05-20 14:50:44 +02:00
Erwin Ried
7058c872f3 Fork rename 2020-05-12 16:12:16 +02:00
Erwin Ried
4597c61c57 Removing playdead calls, non-implemented entries in main menu, and small UI tweaks 2020-05-11 11:07:45 +02:00
Ziggy
b690165da3 UI Redesign for Portapack-Havoc (#268)
* Power: Turn off additional peripheral clock branches.

* Update schematic with new symbol table and KiCad standard symbols.
Fix up wires.

* Schematic: Update power net labels.

* Schematic: Update footprint names to match library changes.

* Schematic: Update header vendor and part numbers.

* Schematic: Specify (arbitrary) value for PDN# net.

* Schematic: Remove fourth fiducial. Not standard practice, and was taking up valuable board space.

* Schematic: Add reference oscillator -- options for clipped sine or HCMOS output.

* Schematic: Update copyright year.

* Schematic: Remove CLKOUT to CPLD. It was a half-baked idea.

* Schematic: Add (experimental) GPS circuit.
Add note about charging circuit.
Update date and revision to match PCB.

* PCB: Update from schematic change: now revision 20180819.
Diff was extensive due to net renumbering...

* PCB: Fix GPS courtyard to accommodate crazy solder paste recommendation in integration manual.
PCB: Address DRC clearance violation between via and oscillator pad.

* PCB: Update copyright on drawing.

* Update schematic and PCB date and revision.

* gitignore: Sublime Text editor project/workspace files

* Power: Power up or power down peripheral clock at appropriate times, so firmware doesn't freeze...

* Clocking: Fix incorrect shift for CGU IDIVx_CTRL.PD field.

* LPC43xx: Add CGU IDIVx struct/union type.

* Power: Switch off unused IDIV dividers. Make note of active IDIVs and their use.

* HackRF Mode: Upgrade firmware to 2018.01.1 (API 1.02)

* MAX V CPLD: Refactor class to look more like Xilinx CoolRunner II CPLD class.

* MAX V CPLD: Add BYPASS, SAMPLE support.
Rename enter_isp -> enable, exit_isp -> disable.
Use SAMPLE at start of flash process, which somehow addresses the problem where CFM wouldn't load into SRAM (and become the active bitstream) after flashing.

* MAX V CPLD: Reverse verify data checking logic to make it a little faster.

* CPLD: After reprogramming flash, immediately clamp I/O signals, load to SRAM, and "execute" the new bitstream.

* Si5351: Refactor code, make one of the registers more type-safe.
Clock Manager: Track selected reference clock source for later use in user interface.

* Clock Manager: Add note about PPM only affecting Si5351C PLLA, which always runs from the HackRF 25MHz crystal.
It is assumed an external clock does not need adjustment, though I am open to being convinced otherwise...

* PPM UI: Show "EXT" when showing PPM adjustment and reference clock is external.

* CPLD: Add pins and logic for new PortaPack hardware feature(s).

* CPLD: Bitstream to support new hardware features.

* Clock Generator: Add a couple more setter methods for ClockControl registers.

* Clock Manager: Use shared MCU CLKIN clock control configuration constant.

* Clock Manager: Reduce MCU CLKIN driver current. 2mA should be plenty.

* Clock Manager: Remove redundant clock generator output enable.

* Bootstrap: Remove unnecessary ldscript hack to locate SPIFI mode change code in RAM.

* Bootstrap: Get CPU operating at max frequency as soon as possible.
Update SPIFI speed comment.
Make some more LPC43xx types into unions with uint32_t.

* Bootstrap: Explicitly configure IDIVB for SPIFI, despite LPC43xx bootloader setting it.

* Clock Manager: Init peripherals before CPLD reconfig. Do the clock generator setup after, so we can check presence of PortaPack reference clock with the help of the latest CPLD bitstream.

* Clock Manager: Reverse sense of conditional that determines crystal or non-crystal reference source. This is for an expected upcoming change where multiple external options can be differentiated.

* Bootstrap: Consolidate clock configuration, update SPIFI rate comment.

* Clock Manager: Use IDIVA for clock source for all peripherals, instead of PLL1. Should make switching easier going forward.
Don't use IRC as clock during initial clock manager configuration. Until we switch to GP_CLKIN, we should go flat out...

* ChibiOS M0: Change default clock speed to 204MHz, since bootstrap now maxes out clock speed before starting M0 execution.

* PortaPack IO: Expose method to set reference oscillator enable pin.

* Pin configuration: Do SPIFI pin config with other pins, in preparation for eliminating separate bootloader.

* Pin configuration: Disable input buffers on pins that are never read.

* Revert "ChibiOS M0: Change default clock speed to 204MHz, since bootstrap now maxes out clock speed before starting M0 execution."

This reverts commit c0e2bb6cc4cc656769323bdbb8ee5a16d2d5bb03.

* PCB: Change PCB stackup, Tg, clarify solder mask color, use more metric.

* PCB: Move HackRF header P9 to B.CrtYd layer.

* PCB: Change a Tg reference I missed.

* PCB: Update footprints for parts with mismatched CAD->tape rotation.
Adjust a few layer choice and line thickness bits.

* PCB: Got cold feet, switched back to rectangular pads.

* PCB: Add Eco layers to be visible and Gerber output.

* PCB: Use aux origin for plotting, for tidier coordinates.

* PCB: Output Gerber job file, because why not?

* Schematic: Correct footprints for two reference-related components.

* Schematic: Remove manfuacturer and part number for DNP component.

* Schematic: Specify resistor value, manufacturer, part number for reference oscillator series termination.

* PCB: Update netlist and footprints from schematic.

* Netlist: Updated component values, footprints.

* PCB: Nudge some components and traces to address DRC clearance violations.

* PCB: Allow KiCad to update zone timestamps (again?!).

* PCB: Generate *all* Gerber layers.

* Schematic, PCB: Update revision to 20181025.

* PCB: Adjust fab layer annotations orientation and font size.

* PCB: Hide mounting hole reference designators on silk layer.

* PCB: Shrink U1, U3 pads to get 0.2mm space between pads.

* PCB: Set pad-to-mask clearance to zero, leave up to fab. Set minimum mask web to 0.2mm for non-black options.

* PCB: Revise U1 pad shape, mask, paste, thermal drills.
Clearance is improved at corner pads.

* PCB: Tweak U3 for better thermal pad/drill/mask/paste design.

* PCB: Change solder mask color to blue.

* Schematic, PCB: Update revision to 20181029.

* PCB: Bump minimum mask web down a tiny bit because KiCad is having trouble with math.

* Update schematic

* Remove unused board files.

* Add LPC43xx functions.

* chibios: Replace code with per-peripheral structs defining clocks, interrupts, and reset bits.

* LPC43xx: Add MCPWM peripheral struct.

* clock generator: Use recommended PLL reset register value.

Datasheet recommends a value. AN619 is quiet on the topic, claims the low nibble is default 0b0000.

* GPIO: Tweak masking of SCU function.

I don't remember why I thought this was necessary...

* HAL: Explicitly turn on timer peripheral clocks used as systicks, during init.

* SCU: Add struct to hold pin configuration.

* PAL: Add functions to address The Glitch.

https://greatscottgadgets.com/2018/02-28-we-fixed-the-glitch/

* PAL/board: New IO initialization code

Declare initial state for SCU pin config, GPIOs. Apply initial state during PAL init. Perform VAA slow turn-on to address The Glitch.

* Merge M0 and M4 to eliminate need for bootstrap firmware

During _early_init, detect if we're running on the M4 or M0.
If M4: do M4-specific core initialization, reset peripherals, speed up SPIFI clock, start M0, go to sleep.
If M0: do all the other things.

* Pins: Miscellaneous SCU configuration tweaks.

* Little code clarity improvement.

* bootstrap: Remove, not necessary.

* Clock Manager: Large re-working to support external references.

* Clock Manager: Actually store chosen clock reference

Similarly-named local was covering a member and discarding the value.

* Clock Manager: Reference type which contains source, frequency.

* Setup: Display reference source, frequency in frequency correction screen.

* LPC43xx API: Add extern "C" for use from C++.

* Use LPC43xx API for SGPIO, GPDMA, I2S initialization.

* I2S: Add BASE_AUDIO_CLK management.

* Add MOTOCON_PWM clock/reset structure.

* Serial: Fix dumb typos.

* Serial: Remove extra reference operator.

* Serial: Cut-and-paste error in structure type name.

* Move SCU structure from PAL to LPC43xx API.

It'd be nice if I gave some thought to where code should live before I commit it.

* VAA power: Move code to HackRF board file

It doesn't belong in PAL.

* MAX5 CPLD: Add SAMPLE and EXTEST methods.

* Flash image: Change packing scheme to use flash more efficiently.

Application is now a single image for both M4 bootstrap and M0.
Baseband images come immediately after application binary. No need to align to large blocks (and waste lots of flash).

* Clock Manager: Remove PLL1 power down function.

* Move and rename peripherals reset function to board module.

* Remove unused peripheral/clock management.

* Clock Manager: Extract switch to IRC into separate function.

* Clock Manager: More explicit shutdown of clocks, clock generator.

* Move initialization to board module.

* ChibiOS: Rename "application" board, add "baseband" board.

There are now two ChibiOS "boards", one which runs the application and does the hardware setup. The other board, "baseband", does very little setup.

* Clock Manager: Remove unused crystal enable/disable code.

* Clock Manager: Restore clock configuration to SPIFI bootloader state before app shutdown.

* Reset peripherals on app shutdown.

Be careful not to reset M0APP (the core we're running on) or GPIO (which is holding the hardware in a stable state).

* M4/baseband hal_lld_init: use IDIVA, which is configured earlier by M0.

This was causing problems during restart into HackRF mode. Baseband hal_lld_init changed M4 clock from IDIVA (set by M0) to PLL1, which was unceremoniously turned off during shutdown.

* Audio app: Stop audio PLL on shutdown.

* M4 HAL: Make LPC43XX_M4_CLK_SRC optional.

This was changing the BASE_M4_CLK when a baseband was run.

* LPC43xx C++ layer: Fix IDIVx constructor IDIV narrow field width.

* Application board: hide the peripherals_reset function, as it isn't useful except during hardware init.

* Consolidate hardware init code to some degree.

ClockManager is super-overloaded and murky in its purpose.
Migrate audio from IDIVC to IDIVD, to more closely resemble initial clock scheme, so it's simpler to get back to it during shutdown.

* Migrate some startup code to application board.

* Si5351: Use correct methods for reset().

update_output_enable_control() doesn't reset the enabled outputs to the reset state, unless the object is freshly initialized, which it isn't when performing firmware shutdown.
For similar reasons, use set_clock_control() instead of setting internal state and then using the update function.

* GPIO: Set SPIFI CS pin to match input buffer state coming out of bootloader.

* Change application board.c to .cpp, with required dependent changes

* Board: Clean up SCU configuration code/data.

* I2S: Add shutdown code and use it.

* LPC43xx: Consolidate a bunch of structures that had been scattered all over.

...because I'm an undisciplined coder.

* I2S: Fix ordering of branch and base clock disable.

Core was hanging, presumably because the register interface on the branch/peripheral was unresponsive after the base clock was disabled.

* Controls: Save and expose raw navigation wheel switch state

I need to do some work on debouncing and ignoring simultaneous key presses.

* Controls: Add debug view for switches state.

* Controls: Ignore all key presses until all keys are released.

This should address some mechanical quirks of the navigation wheel used on the PortaPack.

* Clock Manager: Wait for only the necessary PLL to lock.

Wasn't working on PortaPacks without a built-in clock reference, as that uses the other PLL.
TODO: Switching PLLs may be kind of pointless now...

* CMake: Pull HackRF project from GitHub and build.

* CMake: Remove commented code.

* CMake: Clone HackRF via HTTPS, not SSH.

* CMake: Extra pause for slow post-DFU firmware boot-up.

* CMake: TODO to fix SVF/XSVF file source.

* CMake: Ask HackRF hackrf_usb to make DFU binary.

* Travis-CI: Add dfu-util, now that HackRF firmware is being built for inclusion.

* Travis-CI: Update build environment to Ubuntu xenial

Previously Trusty.

* Travis-CI: Incorrectly structured my request for dfu-util package.

I'm soooo talented.

* ldscript: Mark flash, ram with correct R/W/X flags.

* ldscript: Enlarge M0 flash region to 1Mbyte, the size of the HackRF SPI flash.

* Receiver: Hide PPM adjustment if clock source is not HackRF crystal.

* Documentation: Update product photos and README.

* Documentation: Add TCXO feature to README description.

* Application: Rearrange files to match HAVOC directory structure.

* Map view in AIS (#213)

* Added GeoMapView to AISRecentEntryDetailView

* Added autoupdate in AIS map

* Revert "Map view in AIS (#213)"

This reverts commit 262c030224.

This commit will be cherry-picked onto a clean branch, then re-committed after a troublesome pull request is reverted.

* Revert "Upstream merge to make new revision of PortaPack work (#206)"

This reverts commit 920b98f7c9.

This pull request was missing some changes and was preventing firmware from functioning on older PortaPacks.

* CPLD: Pull bitstream from HackRF project.

* SGPIO: Identify pins on CPLD by their new functions. Pull down HOST_SYNC_EN.

* CPLD: Don't load HackRF CPLD bitstream into RAM.

Trying to converge CPLD implementations, so this shouldn't be necesssary. HOWEVER, it would be good to *check* the CPLD contents and provide a way to update, if necessary.

* CPLD: Tweak clock generator config to match CPLD timing changes in HackRF.

* PinConfig: Drive CPLD pins correctly.

* CMake: Use jboone/hackrf master branch, now that CPLD fixes are there.

* CMake: Fix HackRF CPLD SVF dependency.

Build would break on the first pass, but work if you restarted make.

* CMake: Fix my misuse of the HackRF CMake configuration -- was building from too deep in the directory tree

* CMake: Work-around for CMake 3.5 not supporting ExternalProject_Add SOURCE_SUBDIR.

* CMake: Choose a CMP0005 policy to quiet CMake warnings.

* Settings: Show active clock reference. Only show PPM adjustment for HackRF source.

* Setup: Format clock reference frequency in MHz, not Hz.

* Radio Settings: Change reference clock text color.

Make consistent color with other un-editable text.
TODO: This is a bit of a hack to get ui::Text objects to support custom colors, like the Label structures used elsewhere.

* Pin config: VREGMODE=1, add other pins for completeness, comment detail

* Pin setup: More useful comments.

* Pin setup: Change some defaults, only set up PortaPack pins if detected.

* Pin setup: Disable LPC pull-ups on PP CPLD data bus, as CPLD is pulling up.

* Baseband: Allow larger HackRF firmware image.

* HackRF: Remove USER_INTERFACE CMake variable.

* CPLD: Make use of HackRF CPLD tool to generate code.

* Release: Add generation of MD5SUMS, SHA256SUMS during "make release"

* Clock generator: Match clock output currents to HackRF firmware.

Someday, we will share a code base again...

* CMake: Make "firmware" target part of the "all" target.

So now an unqualified "make" will make the firmware binary.

* CMake: Change how HackRF firmware is incorporated into binary.

Use the separate HackRF "RAM" binary. Get rid of the strip-dfu utility, since there's no longer a need to extract the binary from the DFU.

* CMake: Renamed GIT_REVISION* -> GIT_VERSION* to match HackRF build env.

* CMake: Bring git version handling closer to HackRF for code reuse.

* Travis-CI: Rework CI release artifact output.

* Travis-CI: Don't assign PROJECT_NAME within deploy-nightly.sh

* Travis-CI: Oops, don't include distro package for compiler...

...when also installing it from a third-party PPA.

* Travis-CI: Update GCC package, old one seems "retired"?

* Travis-CI: OK, the gcc-arm-none-eabi package is NOT current. Undoing...

* Travis-CI: Path oopsies.

* Travis-CI: More path confusion. I think this will do it. *touch wood*

* Travis-CI: Update build message sent to FreeNode #portapack IRC.

* Travis-CI: Break out BUILD_DATE from BUILD_NAME.

* Travis-CI: Introduce build directories, include MD5 and SHA256 hashes.

* Travis-CI: Fix MD5SUMS/SHA256SUMS paths.

* Travis-CI: Fix typo generating name for binary links.

* Power: Keep 1V8 off until after VAA is brought up.

* Power: Bring up VAA in several steps to keep voltage swing small.

* About: Show longer commit/tag version string.

* Versioning: Report non-CI builds with "local-" version prefix.

* Travis-CI: Report new nightly build site in IRC notification.

* Change use of GIT_VERSION to VERSION_STRING
Required by prior merge.

* Git: add "hackrf" submodule.

* CMake: Use hackrf submodule for build, stop pulling during build.

* Travis: Fix build paths due to CMake submodule changes.

* Travis: Explicitly update submodules recursively

* Revert "Travis: Explicitly update submodules recursively"

This reverts commit b246438d805f431e727e01b7407540e932e89ee1.

* Travis: Try to sort out hackrf submodule output paths...

* Travis: I don't know what I'm doing.

* CMake: "make firmware" problem due to target vs. path used for dependency.

* HackRF: Incorporate YAML security fix.

* CMake: Fix more places where targets should be used...

...instead of paths to outputs.

* CMake: Add DFU file to "make firmware" outputs

* HackRF: Update submodule for CMake m0_bin.s path fix.

* added encoder support to alphanum

* added encoder support to freq-keypad

* UI Redesign -
added BtnGrid & NewButton widgets and created a new button-based
layout, with both encoder and touchscreen are supported.

* Scanner changes:
- using SCANNER.TXT for frequencies, ranges also supported. file
format is the same as any other frequency file, thus can be edited
via the Frequency Manager.
- add nfm bw selector & time-to-wait to the UI
- add SCANNER.TXT to sdcard dir

orignal idea & scanner file adopted from user 'bicurico'

* small changes to scanner

* remember last category on frequency manager

* fix: cast int16_t instead of uint16_t (although i doubt we will
have more than 32767 buttons in the array...)

* added a missing last_category_id on freq manager
2019-10-29 22:53:54 +01:00
furrtek
609235b19f Testing external clock detection and auto-switch
Simplified audio spectrum computation and transfer
ACARS RX in debug mode
Disabled ABI warnings
Updated binary
2018-06-12 07:55:12 +01:00
furrtek
b29c1d9749 Finally found what was eating all the RAM :D
Re-enabled the tone key selector in Soundboard
Soundboard now uses OutputStream, like Replay
Constexpr'd a bunch of consts which were going to BSS section
Exiting an app now goes back to main menu
Cleaned up Message array
2018-05-15 23:35:30 +01:00
furrtek
f0c912be2e Added Bias-T toggle confirmation
Backlight setting save bugfix
Updated binary
2018-01-08 03:47:37 +00:00
furrtek
3193c6ee99 Added bias-T status icon
Merged radio settings in one screen
2018-01-07 23:13:08 +00:00
furrtek
c0f51c2690 Date and time display widget
Disabled handwriting text input (not that useful for now)
Bugfix: Trim long filenames in fileman
Slight cleanup of 7-seg display widget
2017-09-20 07:50:59 +01:00
furrtek
b3aa4bf0b9 Reorganized menus 2017-05-25 21:36:30 +01:00
furrtek
089eeeafe4 Tones bugfix, numbers station voice files search 2017-03-22 03:21:06 +00:00
furrtek
44b2fc469c Added microphone TX (very basic for now) 2017-03-12 07:09:22 +00:00
furrtek
21de81bb85 POCSAG TX: Support for numeric only and address only messages 2017-02-08 01:19:29 +00:00
furrtek
fc8279aa30 POCSAG TX text and bitrate can be changed
Modal view message can be multiline now
2017-02-07 19:54:18 +00:00
furrtek
f9dd3f5a96 Icons and icon tool update 2017-02-03 08:21:12 +00:00
furrtek
688a012443 Transmitter config widget
Frequency manager duplicate alert
Tone sets
2017-01-30 13:10:30 +00:00
furrtek
0642d633c3 Frequency manager empty file bugfix 2017-01-30 01:09:00 +00:00
furrtek
e4abcea9a3 Added bitrate option for POCSAG baseband, PWMRSSI frequency option
Split SD card wiper app
Cleanup for -Weffc++
2017-01-16 08:40:17 +00:00
furrtek
5e40669cbc Merge 'upstream/master' - At least it builds... 2017-01-16 03:45:44 +00:00
furrtek
3ec725c172 Added SD card wiper tool
Frequency manager now creates FREQMAN.TXT if not found
Moved graphics files
2017-01-10 18:40:33 +00:00
furrtek
7df5987b3b Added utilities > Frequency manager + load/save 2016-12-26 01:31:38 +01:00
furrtek
6bcb7dc1b1 # This is a combination of 2 commits.
# The first commit's message is:

Updated RDS transmitter: flags, PI and date/time

Merging baseband audio tone generators

Merging DTMF baseband with "tones" baseband

Added stealth transmit mode

App flash section bumped to 512k
RX and TX LEDs are now used
Play dead should work again, added login option
Morse frame gen. for letters and fox hunt codes
Merged EPAR with Xylos
Made EPAR use encoders for frame gen.
Moved OOK encoders data in encoders.hpp
Simplified about screen, ui_about_demo.* files are still there

BHT city DB, keywords removed

BHT cities DB, keywords removed

Update README.md

RDS radiotext and time group generators

# This is the 2nd commit message:

Update README.md
2016-12-24 11:52:11 +01:00
furrtek
75e8a664b0 3D buttons, to make UI clearer 2016-12-23 18:31:03 +01:00
furrtek
e56fa0f479 Numbers station works, very basic
Added utilities, whip antenna length calculator
Modal errors/abort
2016-12-23 18:31:02 +01:00
furrtek
bb6eefe2be Started ADS-B TX UI and frame encoding 2016-11-30 07:41:55 +01:00
Jared Boone
46b3d9d087 Disallow copy constructors/assignments.
For classes containing pointers/state that should not be copied.
2016-11-26 16:52:57 -08:00
Jared Boone
4eb0facacb Add lots of value constructors. 2016-11-26 16:50:44 -08:00
furrtek
02f0271553 Added basic POCSAG receiver
Added Yes/no modal screen (for future tx warnings)
2016-08-23 08:45:33 +02:00
furrtek
fdfa7c9776 Merge remote-tracking branch 'upstream/master'
Conflicts:
	firmware/Makefile
	firmware/application/Makefile
	firmware/application/event_m0.cpp
	firmware/application/ui_setup.cpp
	firmware/application/ui_setup.hpp
	firmware/baseband/baseband_thread.cpp
	firmware/baseband/baseband_thread.hpp
	firmware/bootstrap/CMakeLists.txt
	firmware/common/message.hpp
	firmware/common/portapack_shared_memory.hpp
	hardware/.gitignore
2016-07-25 16:35:42 +02:00
furrtek
e15f659a6a RDS radiotext transmit (group 2A)
Keyboard/Unistroke text input method selection
2016-05-29 12:06:47 +02:00
Jared Boone
65d2f263f2 Center modal view message. 2016-05-17 11:06:37 -07:00
Jared Boone
ac49726707 Rename display_error() -> display_modal(), add title argument. 2016-05-17 10:15:34 -07:00
Jared Boone
6a3cd4c144 Centralize handling of modal error display. 2016-05-17 09:33:16 -07:00
Jared Boone
92d75fa46d Very crude ModalMessageView.
Initially for displaying filesystem errors.
2016-05-12 21:58:54 -07:00
furrtek
569f299f42 Merge 2016-05-09 21:05:11 +02:00
furrtek
d55a420dfd Fixed module loading (again), only audio tx works for now 2016-04-28 14:59:14 +02:00
Jared Boone
f2453dd639 Consolidate bitmaps for reuse. 2016-04-22 11:57:46 -07:00
furrtek
1b0da68d65 Merge remote-tracking branch 'upstream/master'
Conflicts:
	firmware/application/Makefile
	firmware/application/core_control.cpp
	firmware/application/touch.cpp
	firmware/application/ui_debug.cpp
	firmware/application/ui_debug.hpp
	firmware/application/ui_navigation.cpp
	firmware/baseband/baseband_thread.cpp
2016-04-21 20:36:19 +02:00
Jared Boone
40d7f3a134 Add screen capture button. 2016-02-18 21:35:46 -08:00
Jared Boone
8f8a9f2b63 Fix back button repaint/focus quirks. 2016-02-07 10:33:15 -08:00
furrtek
8009a9b543 Merge remote-tracking branch 'upstream/master'
Conflicts:
	firmware/application/Makefile
	firmware/application/analog_audio_app.cpp
	firmware/application/analog_audio_app.hpp
	firmware/application/event.cpp
	firmware/application/irq_ipc.hpp
	firmware/application/portapack.hpp
	firmware/application/receiver_model.cpp
	firmware/application/receiver_model.hpp
	firmware/application/recent_entries.cpp
	firmware/application/string_format.hpp
	firmware/application/ui_debug.cpp
	firmware/application/ui_debug.hpp
	firmware/application/ui_menu.cpp
	firmware/application/ui_navigation.cpp
	firmware/application/ui_navigation.hpp
	firmware/application/ui_receiver.cpp
	firmware/application/ui_receiver.hpp
	firmware/application/ui_sd_card_status_view.cpp
	firmware/application/ui_sd_card_status_view.hpp
	firmware/application/ui_setup.cpp
	firmware/application/ui_setup.hpp
	firmware/application/ui_spectrum.hpp
	firmware/baseband-tx/dsp_fir_taps.cpp
	firmware/baseband-tx/dsp_fir_taps.hpp
	firmware/baseband-tx/irq_ipc_m4.cpp
	firmware/baseband-tx/irq_ipc_m4.hpp
	firmware/baseband-tx/proc_audiotx.cpp
	firmware/baseband/Makefile
	firmware/baseband/audio_output.cpp
	firmware/baseband/audio_output.hpp
	firmware/baseband/block_decimator.hpp
	firmware/baseband/dsp_decimate.cpp
	firmware/baseband/dsp_decimate.hpp
	firmware/baseband/dsp_demodulate.cpp
	firmware/baseband/dsp_demodulate.hpp
	firmware/baseband/dsp_fir_taps.cpp
	firmware/baseband/irq_ipc_m4.cpp
	firmware/baseband/irq_ipc_m4.hpp
	firmware/baseband/proc_am_audio.cpp
	firmware/baseband/proc_am_audio.hpp
	firmware/baseband/proc_nfm_audio.cpp
	firmware/baseband/proc_nfm_audio.hpp
	firmware/baseband/proc_wfm_audio.cpp
	firmware/baseband/proc_wfm_audio.hpp
	firmware/baseband/spectrum_collector.hpp
	firmware/common/dsp_fir_taps.cpp
	firmware/common/dsp_fir_taps.hpp
	firmware/common/event.hpp
	firmware/common/message.hpp
	firmware/common/ui_painter.cpp
	firmware/common/ui_painter.hpp
2016-02-04 11:35:55 +01:00
furrtek
6e496e2b26 Merge fixing, commit to catch up on recent files 2016-02-04 10:27:53 +01:00
Jared Boone
5d4e59271a Switch display sleep button to ImageButton. 2016-02-03 16:14:34 -08:00
Jared Boone
dd6d56cff8 SD card status view inherits from new Image class. 2016-02-03 15:50:14 -08:00
furrtek
44638e504b SYNC 2016-01-31 09:34:24 +01:00
furrtek
107c212d88 Completely useless "about" screen
Paved road for talking Xylos RX and logger
Added test button for Xylos TX
Fixed jammer crashing after loading second time
2016-01-30 00:28:05 +01:00
Jared Boone
894d4b955c Unclever first attempt at display sleep. 2016-01-27 20:33:54 -08:00
Jared Boone
7fe8288737 Set Navigation title with View.title() if not empty. 2016-01-26 13:04:44 -08:00
Jared Boone
15800eea33 Move nav back button outside of ReceiverView. 2016-01-25 11:13:19 -08:00
Jared Boone
5ecc6d0330 Add Receiver sub-menu, Transponders item and sub-menu. 2016-01-24 22:38:36 -08:00
Jared Boone
a340cbb74b Make NavigationView an implicit first argument to any instance pushed onto nav stack. 2015-12-14 11:18:59 -08:00
Jared Boone
0828c66b8a Move default constructor to .hpp. 2015-12-14 11:12:12 -08:00
Jared Boone
969d9bd070 Use std::unique_ptr inside NavigationView. 2015-12-14 11:11:49 -08:00
Jared Boone
18c4672ba2 Clean up navigation stack alloc/delete sequence. 2015-12-14 10:52:08 -08:00
Jared Boone
97f29f8336 Clean up UI navigation push constructor scheme. 2015-12-14 10:22:42 -08:00
Jared Boone
0c36a74351 Add SD card status view to receiver UI. 2015-12-01 10:45:34 -08:00
furrtek
835d581e6c Merged remote-tracking branch 'upstream/master' 2015-11-18 22:01:48 +01:00
furrtek
9a7657fb38 Play dead actually works, fixed 7bit AFSK, AFSK repeat, started whistle mode 2015-09-10 20:36:39 +02:00
furrtek
30531a20f2 Splash screen and Play Dead functionality 2015-09-04 20:37:27 +02:00
Jared Boone
24e398ca62 Add HackRF mode explanation text. 2015-09-01 20:23:11 -07:00
Jared Boone
b70f1d9506 Move RSSI/baseband/audio bars to receiver mode.
Addresses issue #38.
Side effects: more room in receiver for fields and data. More room for global status indications in full bar of SystemStatusView.
2015-08-01 18:07:09 -07:00
Jared Boone
30d249df26 Remove dead code. 2015-08-01 15:20:44 -07:00
Jared Boone
b5802aadda Clean up HackRF firmware mode message. 2015-08-01 14:32:22 -07:00
Jared Boone
fecbb7205e Menu item to launch HackRF firmware. 2015-08-01 13:46:15 -07:00
Jared Boone
154b40d3c9 Extract baseband stats into separate widget
Also removed baseband saturation indication on red (TX) LED. A saturation indicator needs to live somewhere else, and be thought out a bit more...
2015-07-09 11:53:10 -07:00
Jared Boone
dc6fee8370 Initial firmware commit. 2015-07-08 08:39:24 -07:00