Git-Mirrors/portapack-mayhem
1
0
Fork 0
mirror of https://github.com/eried/portapack-mayhem.git synced 2024-12-25 15:29:37 -05:00
Code Issues Packages Projects Releases Wiki Activity
2,123 Commits 2 Branches 494 Tags 490 MiB
8cb5ddb9ce
Commit Graph

1140 Commits

Author SHA1 Message Date
Jared Boone
42d98c3b45 RecentEntries: Remove Packet template arg. 2016-09-03 16:38:44 -07:00
Jared Boone
4d781df76c RecentEntries: Don't reference Entry template arg directly. 2016-09-03 12:58:11 -07:00
Jared Boone
c6f7d7f844 RecentEntriesView: Extract duplicate focus+selection style code. 2016-09-02 22:44:40 -07:00
Jared Boone
1e0d452f57 RecentEntriesView: Generalize draw_header() implementations. 2016-09-02 22:38:05 -07:00
Jared Boone
42a07bb10c Remove repeated code in RF path Config. 2016-08-30 21:26:55 -07:00
furrtek
808f99647e Soundboard: Arbitrary samplerate support for wave files 
Screenshots
 2016-08-26 09:54:17 +02:00
furrtek
f7e0f36bd9 Added Soundboard 
file.cpp: scan_root_files
proc_audiotx.cpp: bandwidth setting
ui_widget.cpp: button on_focus
 2016-08-26 08:11:24 +02:00
furrtek
5de6349199 Bitrate and flags for POCSAG packets, trim bugfix 2016-08-25 16:20:19 +02:00
furrtek
04cdafe387 Bugfix: POCSAG alphanum messages not showing 
Bugfix: Range limit for afsk config
 2016-08-24 14:44:57 +02:00
furrtek
86e3b55a54 Bugfix: forgot bit reversal for POCSAG alphanumeric messages 2016-08-23 17:50:18 +02:00
furrtek
1b9465716f HH:MM in POCSAG RX 2016-08-23 14:35:14 +02:00
furrtek
0a549c8192 Manual frequency input in POCSAG RX 
Changed firmware file name
 2016-08-23 11:27:10 +02:00
furrtek
02f0271553 Added basic POCSAG receiver 
Added Yes/no modal screen (for future tx warnings)
 2016-08-23 08:45:33 +02:00
Jared Boone
81517b3f4d SD debug: Enlarge stack for long filenames, etc. 2016-08-21 22:16:08 -07:00
Jared Boone
ed791ac5bd File: Widen size/offset types for 64-bit filesystems. 2016-08-21 22:15:19 -07:00
Jared Boone
f7bfde73b6 FatFs: Enable long file name support. 
Lots of re-plumbing to make this work, including a bunch of Unicode stuff now in the binary. Bloat City, I'm sure.

TODO: FatFs using unsigned (uint16_t) for UTF16 representation is kinda inconvenient. Lots of reinterpret_cast<>().
 2016-08-21 18:06:39 -07:00
Jared Boone
43a11ba048 Rename time files/namespace to not conflict with existing defs. 2016-08-21 17:49:06 -07:00
Jared Boone
f20647feb4 MAX2837: Expose trim/bias/calibration adjustments. 2016-08-21 11:42:05 -07:00
Jared Boone
77016b9a40 Rename CPLD "Q_INVERT" to signal to "INVERT". 
Don't expose detail in name about how the task is accomplished.
 2016-08-21 11:35:40 -07:00
Jared Boone
b0a3f680e5 CPLD: Remove decimation feature. 2016-08-21 11:31:37 -07:00
furrtek
c2fbc0c8d5 AudioTX, fixed about screen and an LCR address list bug 2016-08-17 04:17:24 +02:00
furrtek
45a754645e Merge remote-tracking branch 'upstream/master' 
# Conflicts:
#	firmware/application/bitmap.hpp
#	firmware/application/receiver_model.cpp
#	firmware/application/receiver_model.hpp
#	firmware/application/touch.hpp
#	firmware/application/ui_setup.cpp
#	firmware/baseband/proc_ais.hpp
#	firmware/baseband/proc_ert.hpp
#	firmware/bootstrap/CMakeLists.txt
#	firmware/common/portapack_persistent_memory.cpp
#	firmware/common/portapack_persistent_memory.hpp
 2016-08-17 02:55:34 +02:00
furrtek
e686c7437e Fixed OOK clk setting 2016-08-06 12:55:39 +02:00
furrtek
38e506a108 OOK transmit is mostly working, bit durations are wrong 
Simplified messages carrying data (uses shared_memory instead)
Added SymField widget (bitfield, symbol field...)
Added some space for baseband code
BMP palette loading bugfix
 2016-08-06 08:49:45 +02:00
Jared Boone
447a7a5661 Add TXGainField user interface element. 2016-08-03 16:14:34 -07:00
Jared Boone
ef9b4051b7 Expose TX gain on ReceiverModel. 
Obviously, ReceiverModel is an even worse name/concept than it was before.
 2016-08-03 16:13:54 -07:00
Jared Boone
1e39b7ea45 Expose TX gain in radio API. 2016-08-03 16:12:22 -07:00
Jared Boone
45a1ccbc53 Correctly map TX gain from dB to register value. 2016-08-03 16:12:01 -07:00
furrtek
787f656500 Testing OOK TX baseband module 2016-08-03 08:53:50 +02:00
furrtek
1b44b22419 Wrote most of the Encoders TX app (lacks baseband module) 
Fixed menu scroll glitch
Added set_range to NumberField widget
 2016-08-03 04:53:51 +02:00
furrtek
e2218a0f32 More AFSK options, scan lists, 2016-08-02 12:44:31 +02:00
furrtek
72f3c08e9b Added raw ASCII char field in keyboard view 2016-08-01 20:06:17 +02:00
furrtek
94b27ec45c Scrollable menuview 2016-07-30 05:27:28 +02:00
Jared Boone
e9d97dfd0f FatFs: Update application ffconf.h from template. 2016-07-28 23:15:10 -07:00
furrtek
c58039e557 Fixed LCR scan and alt format, console widget, text input autotrim 2016-07-29 04:52:51 +02:00
Jared Boone
16a6d7efe0 Touch: Adjust thresholds and parameters for new scan. 2016-07-27 21:58:35 -07:00
Jared Boone
dd2097a447 Touch: Simplify scanning. 2016-07-27 21:57:51 -07:00
Jared Boone
8a8e84d763 Remove debugging code. 2016-07-27 21:57:00 -07:00
furrtek
1d697d2201 Added PWM RSSI output for NBFM and WFM 2016-07-28 05:25:33 +02:00
Jared Boone
c424bf08f3 Touch: Migrate touch calibration to persistent memory. 2016-07-27 15:30:43 -07:00
Jared Boone
aa1b8f63fc Remove errant debug #define. 2016-07-27 15:12:08 -07:00
furrtek
1beac3bdbd Added repeat setting for AFSK TX, fixed LCR scan, cleaned up LCR 
Added max setting for progressbars, default = 100
 2016-07-28 00:08:05 +02:00
Jared Boone
f85d83475c ReceiverModel: Clean up Mode enum. 2016-07-27 14:57:50 -07:00
Jared Boone
f05d917a7c ReceiverModel: Use Mode instead of integer. 2016-07-27 14:51:37 -07:00
Jared Boone
371c6e0906 ReceiverModel: Eliminate now-redundant BasebandConfiguration. 2016-07-27 14:42:46 -07:00
Jared Boone
b60e88ef68 ReceiverModel: More method renaming. 
update_baseband_configuration() -> update_sampling_rate().
 2016-07-27 14:41:36 -07:00
Jared Boone
5a05a758a1 ReceiverModel: Use accessor method. 2016-07-27 14:40:30 -07:00
Jared Boone
44a1b7d9d7 ReceiverModel: Method renaming. 
update_modulation_configuration() -> update_modulation().
 2016-07-27 14:39:49 -07:00
Jared Boone
24fa97439d Touch: Add touch configuration UI. 2016-07-27 14:15:21 -07:00
Jared Boone
cd9b76ef78 Touch: Average/threshold tweaks. 2016-07-27 14:08:24 -07:00
Jared Boone
7492d50f0b Touch: Use calibration matrix. 2016-07-27 14:08:02 -07:00
Jared Boone
e813db16fd Touch: Missing #include. 2016-07-27 14:04:04 -07:00
Jared Boone
5e5417b456 Touch: Default and active calibration API of sorts. 2016-07-27 14:03:06 -07:00
Jared Boone
c022a72ef4 Touch: Add Calibration class. 
Matrix transforms coordinates from digitizer to display.
 2016-07-27 14:01:20 -07:00
furrtek
e958b4bd7d Fixed LCR transmit and AFSK baseband module 2016-07-27 21:26:03 +02:00
Jared Boone
8d330784b2 CFlags: Add "-g" compiler option for debug symbols. 2016-07-27 11:46:09 -07:00
Jared Boone
9500da4b1b Touch: Fix small loss of precision calculating X/Y positions. 2016-07-27 11:14:11 -07:00
Jared Boone
f1a3201940 Touch: Add bitmaps for calibration UI. 2016-07-27 11:13:07 -07:00
Jared Boone
6c2eb37248 Bitmap: Add note about how data is structured. 2016-07-26 21:29:59 -07:00
furrtek
79f2134d91 Cleaned up Xylos TX, J/N works again 2016-07-27 05:54:55 +02:00
furrtek
739956b42b Sync with Sharebrained's fw, only Xylos TX works for now 2016-07-27 03:03:40 +02:00
Jared Boone
d0fd56bc78 Touch: Expose metrics calculation struct/function. 2016-07-26 15:13:07 -07:00
Jared Boone
3759e142d8 ERT: Add RSSI to app UI. 2016-07-25 16:12:32 -07:00
Jared Boone
5e362534c3 Transponder apps: Use gains from receiver model. 2016-07-25 16:07:22 -07:00
Jared Boone
c573f3b57d ERT: Fix initial focus. 2016-07-25 16:06:26 -07:00
Jared Boone
00f542e96b ERT: Add gain controls. 2016-07-25 16:06:09 -07:00
Jared Boone
aaa0e389b9 AIS: Add gain controls, RSSI and channel indications. 2016-07-25 15:46:37 -07:00
Jared Boone
4eb3f044a0 TPMS: Close row between controls and table header. 2016-07-25 15:29:52 -07:00
furrtek
fdfa7c9776 Merge remote-tracking branch 'upstream/master' 
Conflicts:
	firmware/Makefile
	firmware/application/Makefile
	firmware/application/event_m0.cpp
	firmware/application/ui_setup.cpp
	firmware/application/ui_setup.hpp
	firmware/baseband/baseband_thread.cpp
	firmware/baseband/baseband_thread.hpp
	firmware/bootstrap/CMakeLists.txt
	firmware/common/message.hpp
	firmware/common/portapack_shared_memory.hpp
	hardware/.gitignore
 2016-07-25 16:35:42 +02:00
furrtek
966a758a0b Added frequency manager skeleton, LCR alt encoding, GPS jammer 2016-07-25 16:21:27 +02:00
Jared Boone
ffa797b926 File: Remove puts(), add write_line(), cascade changes in interface. 2016-07-24 20:39:21 -07:00
Jared Boone
c2d971d59e WAVFileWriter: Error handling while updating header. 2016-07-24 19:14:48 -07:00
Jared Boone
ff17f8f293 File: Do not use f_error() in puts(), it doesn't return the reason for failure. 
TODO: Improve puts() behavior to return a more specific error than FR_EOF.
 2016-07-24 19:13:39 -07:00
Jared Boone
d556ef38b4 File: Make incomplete write()s return FR_DISK_FULL. 2016-07-24 19:12:37 -07:00
Jared Boone
931853a55f Make File::Result::value() const. 2016-07-24 19:12:09 -07:00
Jared Boone
8b02e40602 Move touch ADC data collection to M0. 
...so it continues when M4 is shut down.

It's not as pretty as using DMA, but it's far simpler, even if it involves letting the ADC run continuously and taking the last samples even if not synchronizing to the phase of the sampling of the channels.
 2016-07-24 15:31:53 -07:00
Jared Boone
b3f4ea8978 Clean up SharedMemory placement new. 2016-07-24 15:27:05 -07:00
Jared Boone
49d6cda731 Move BasebandConfiguration to receiver_model.hpp. 
That's the only place it's being used now -- it's no longer moving between cores.
 2016-07-19 17:11:32 -07:00
Jared Boone
74b5571e8b Remove baseband::start()/stop() and related message. 2016-07-19 17:06:22 -07:00
Jared Boone
6f65cdf41e Add frequency step control to capture app. 
Redistribute other controls, remove empty row that had been reserved for options views.
 2016-07-19 10:48:45 -07:00
Jared Boone
a98ada0cb7 Extract FrequencyStepView from FrequencyOptionsView. 
...for use in capture app.
 2016-07-19 10:47:15 -07:00
Jared Boone
77291b4e31 On PortaPack shutdown, init HackRF CPLD to EEPROM bitstream. 2016-07-18 11:32:14 -07:00
Jared Boone
c0b9761fe5 Move CPLD management into PortaPack::init(). 2016-07-18 11:30:45 -07:00
Jared Boone
3f3fe3bb67 JTAG: Report if HackRF CPLD bitstream matches released version. 
TODO: Could be better reporting (CRC?), and could not pause while checking CPLD EEPROM, and could offer a means to program the bitstream if it doesn't match...
 2016-07-17 15:56:24 -07:00
Jared Boone
204408d288 JTAG: Load HackRF CPLD bitstream into SRAM from firmware image. 
No further concerns about the HackRF CPLD having an ancient bitstream on it! At least in PortaPack mode...
 2016-07-17 15:54:02 -07:00
Jared Boone
c8b1a8fbf6 JTAG: Add functions to check EEPROM, load SRAM of HackRF CPLD. 2016-07-17 15:52:58 -07:00
Jared Boone
1d58f05163 JTAG: Auto-generate HackRF CPLD data from SVF. 2016-07-17 15:50:36 -07:00
Jared Boone
ad4a68f90a CMake: Generate portapack_cpld_data.cpp from SVF via tool. 2016-07-05 12:45:31 -07:00
Jared Boone
740edc4d49 Remove PortaPack CPLD checksum display. 
No point in calculating or showing, since full compare against desired bits is done at every startup -- way better than a CRC, and if it fails tries to program. If programming fails, the PortaPack panics and LED flashes.
 2016-07-05 12:08:56 -07:00
Jared Boone
42190b9587 CMake: Fix ldscript dependencies. 2016-07-03 18:48:39 -07:00
Jared Boone
b6fe392512 CMake: Improve dependencies, how output files are managed/cleaned. 
I almost think I understand CMake, now. Almost.
 2016-07-03 18:32:50 -07:00
Jared Boone
45ca3cf7e6 CMake: reduce intermediate targets, add script dependencies. 2016-07-03 11:32:21 -07:00
Jared Boone
c52f5fa26c Expose static EventDispatcher to stop main loop. 
Used to fix reboot into HackRF firmware.
 2016-07-02 16:38:01 -07:00
Jared Boone
57293bc5eb Clear application message queue after baseband is shut down. 2016-07-02 16:19:41 -07:00
Jared Boone
30efa53956 Clear M4->M0 interrupt before M4 image is loaded. 
...out of an abundance of caution.
 2016-07-02 16:15:43 -07:00
Jared Boone
34e45412d1 Dumb baseband-running state tracking to ease use of baseband API. 2016-07-02 16:12:36 -07:00
Jared Boone
eac4cf678a Capture M4 chDbgPanic msg, show in application. 2016-07-02 15:33:03 -07:00
Jared Boone
97ba19af24 Change M4 loader to use image tags. 
Also finish moving HackRF binary to tagged image region.
 2016-07-01 10:37:22 -07:00
Jared Boone
97760a2f9d Remove GNU Make files, now using CMake to build firmware. 2016-06-30 12:04:10 -07:00
Jared Boone
cf5ac441ae Add CMake firmware build system. 2016-06-30 12:02:43 -07:00
Jared Boone
d41c6ee36a Simplify app->baseband message handling. 
No need for a FIFO when all messages are intended to be synchronous.
 2016-06-24 14:16:45 -07:00
Jared Boone
e263420ea3 Enable M4 interrupt on M0 core only when M4 image is running. 2016-06-24 11:32:24 -07:00
Jared Boone
c7497577a0 Make all app->baseband messages synchronous. 
No idea why they shouldn't be...
 2016-06-24 11:31:41 -07:00
Jared Boone
303bfeaafc Run baseband image per application. 
First step toward having separate baseband images per app or function.
 2016-06-24 11:30:54 -07:00
Jared Boone
ac0bdc35a6 Set TPMS app initial focus. 2016-06-23 22:11:47 -07:00
Jared Boone
fead46cc46 Fix state management in Capture mode. 
Don't alter ReceiverModel modulation/mode when capturing.
 2016-06-23 12:03:47 -07:00
Jared Boone
3cdce88e5d TPMS: Allow band selection: 315 or 433.92 (~434) MHz. 2016-06-21 15:36:57 -07:00
Jared Boone
003ce4990d Move CaptureThread::static_fn into .cpp. 2016-06-21 12:15:57 -07:00
Jared Boone
264c19b312 Rename CaptureThread message, callback method, handle success. 2016-06-21 12:05:55 -07:00
Jared Boone
81d4e59aeb Add CaptureThread success_callback. 2016-06-21 11:53:07 -07:00
Jared Boone
4ffb05212e Pass error_callback by value. 2016-06-21 11:52:05 -07:00
Jared Boone
0e33d7e5d0 Refresh UIRecordVide status display when appropriate. 2016-06-21 11:35:41 -07:00
Jared Boone
44fb66b4f9 Rename UIRecordView::on_tick_second() -> update_status_display(). 2016-06-21 11:35:15 -07:00
Jared Boone
19e5e111a9 Move UIRecordView::set_sampling_rate to .cpp. 2016-06-21 11:33:23 -07:00
Jared Boone
59aa99c8ff Whoops, use events_flag(), not events_flag_isr(). 2016-06-21 11:19:22 -07:00
Jared Boone
320d979924 Simplify CaptureThread error callback functions. 2016-06-21 11:13:58 -07:00
Jared Boone
cfaa44b02a Send CaptureThread error into app-local message queue. 2016-06-21 11:04:10 -07:00
Jared Boone
76c5fe96af Use app-local queue for messages coming from application. 
Messages are now deferred until application thread call stack unwinds, events are checked.
 2016-06-21 11:00:42 -07:00
Jared Boone
dbe735233a Add app-local MessageQueue. 2016-06-21 10:57:44 -07:00
Jared Boone
c990963298 Expose filesystem_error code. 2016-06-21 10:54:13 -07:00
Jared Boone
420adea180 Move capture start/stop into baseband API. 
Hide more calls to baseband/shared memory.
 2016-06-20 10:52:59 -07:00
Jared Boone
6bd191349a Hide MessageHandlerMap. 
Definitely didn't belong in message.hpp, saw no reason to expose it outside translation unit (.cpp file).
 2016-06-19 22:56:06 -07:00
Jared Boone
f731366248 Hide some M0 EventDispatcher event masks. 2016-06-19 11:41:38 -07:00
Jared Boone
dbc2a5c9ea Hide CaptureThread event mask, only used internally. 2016-06-19 11:20:45 -07:00
Jared Boone
0da48b099c Add RF amp field to TPMS, capture modes. 2016-06-06 10:34:39 -07:00
Jared Boone
9190fe7e4f Move common code to LNA/VGA field widgets. 2016-06-06 10:27:33 -07:00
Jared Boone
5ee035fbb3 Move RF amp control code into new class. 2016-06-06 10:13:36 -07:00
Jared Boone
a0e7fdf90b TPMS: Add gain controls. 2016-06-06 09:50:48 -07:00
furrtek
e15f659a6a RDS radiotext transmit (group 2A) 
Keyboard/Unistroke text input method selection
 2016-05-29 12:06:47 +02:00
furrtek
ceced96673 Started fixing RDS and adding more group types 2016-05-28 01:59:13 +02:00
furrtek
9c3e3bddad LCR scanner and bugfixes, keyboard bugfixes 2016-05-27 09:26:43 +02:00
furrtek
6a0816ba56 Added carrier wake up in Xylos TX and cute icons 2016-05-27 06:48:04 +02:00
Jared Boone
e7aaf0e8cf Format TPMS signal type details in log file. 2016-05-25 18:03:43 -07:00
Jared Boone
04c472e802 Push SignalType inside tpms::Packet. 2016-05-25 17:58:32 -07:00
Jared Boone
83e4aec49c Hack to paint over last options view when none should be visible. 2016-05-25 11:39:03 -07:00
Jared Boone
6a294e7d0e Shameful hack to hide RecordView when sampling_rate == 0. 
Switch visibility of child widgets -- UI fields/controls vs. a black rectangle. TODO: Fix painting and state management, which right now is just terrible.
 2016-05-25 11:33:23 -07:00
Jared Boone
05df04df7e TPMS: Quick implementation of "flags" column. 
For now, shows only for Schrader OOK packets: top (left) nibble is function code, bottom nibble has two-bit checksum.
 2016-05-17 14:23:03 -07:00
furrtek
7a90eab407 3MHz-wide fast close call works :) >3MHz doesn't work anymore :( 2016-05-17 20:27:51 +02:00
Jared Boone
65d2f263f2 Center modal view message. 2016-05-17 11:06:37 -07:00
Jared Boone
ac49726707 Rename display_error() -> display_modal(), add title argument. 2016-05-17 10:15:34 -07:00
Jared Boone
6a3cd4c144 Centralize handling of modal error display. 2016-05-17 09:33:16 -07:00
Jared Boone
682a1706a3 Improve File error handling. Massive effects... 
API is somewhat stolen from Rust std::fs::File. Static factories didn't work out so well, though. Move semantics made my head explode.
TODO: Still a lot of places where errors aren't handled, but it's an improvement...
 2016-05-16 14:01:44 -07:00
furrtek
e959d9a8ec More messagepack 2016-05-16 12:02:45 +02:00
furrtek
61fdb57b8f Testing Messagepack for saving/loading stuff from SD card 2016-05-15 02:35:08 +02:00
Jared Boone
d905c446bf Fix integer width oops calculating disk space(). 2016-05-13 18:10:23 -07:00
furrtek
7267de234d Added EPAR transmit (slow FSK), bit bug for now 2016-05-13 09:34:15 +02:00
Jared Boone
ff5e20a7a4 Refactor capture file writer classes -- lots of common code. 2016-05-12 22:31:56 -07:00
Jared Boone
537296b8c3 Stop capture on error. 2016-05-12 22:03:25 -07:00
Jared Boone
8de12ff570 Display modal error when RecordView experiences an error. 2016-05-12 22:00:40 -07:00
Jared Boone
9dc12fca3c Check for filesystem errors in RecordView. 2016-05-12 21:59:46 -07:00
Jared Boone
92d75fa46d Very crude ModalMessageView. 
Initially for displaying filesystem errors.
 2016-05-12 21:58:54 -07:00
Jared Boone
ebf0e765ce Expose Writer errors through CaptureThread. 2016-05-12 21:58:15 -07:00
Jared Boone
87505f833b Expose filesystem errors on Writer. 2016-05-12 21:57:38 -07:00
Jared Boone
8655b6d915 Adapt filesystem_error to new File error handling, expose on File. 2016-05-12 21:55:39 -07:00
Jared Boone
1df505331a Handle File errors beyond FatFs. 2016-05-12 21:55:01 -07:00
Jared Boone
b21758781c Preserve File error state once error occurs. 2016-05-12 21:54:13 -07:00
Jared Boone
0f1ae96ba4 Move File definition below std::filesystem. 2016-05-12 21:44:37 -07:00
Jared Boone
4567db2fdb Add std::filesystem::filesystem_error object. 
Not a standards-compliant implementation, but has the same vague shape, so should be easier to port later(?).
 2016-05-12 18:19:28 -07:00
furrtek
9149508c83 Improved close call precision 2016-05-13 01:18:04 +02:00
Jared Boone
479a96fc22 Move Painter into EventDispatcher. 2016-05-12 15:52:18 -07:00
Jared Boone
d64344a84f Un-template MessageHandlerRegistration, move code to .cpp. 2016-05-12 15:24:08 -07:00
Jared Boone
7d4dd03418 Wrap message handler registrations in class to subscribe/unsubscribe automatically. 2016-05-11 22:53:09 -07:00
furrtek
7d193c3445 Close call tuning fix, more UI elements 2016-05-11 23:57:22 +02:00
Jared Boone
e298e1ec5a Fix SD capture remaining time formatting -- zero pad minutes. 2016-05-11 12:34:09 -07:00
Jared Boone
46d4c919fb Show SD card capture time remaining even when not capturing. 2016-05-11 12:07:58 -07:00
Jared Boone
7fd508dfbe Format remaining time on SD card as "HHH:MM:SS". 2016-05-11 12:02:39 -07:00
Jared Boone
7d3e697ea8 Rename SD record variables: "free"/"recorded" -> "available" 2016-05-11 11:50:40 -07:00
Jared Boone
b2322370a9 Display remaining capture time on SD card. 2016-05-11 11:22:57 -07:00
Jared Boone
f157c13442 Implement std::filesystem::space(). 2016-05-11 10:58:57 -07:00
furrtek
fb21c1332e Started close call dev 2016-05-11 12:45:03 +02:00
furrtek
b4a113be59 Handwriting fixes 2016-05-11 01:03:42 +02:00
Jared Boone
c48a88539a Check capture FIFO before waking M0 capture thread. 2016-05-10 14:39:24 -07:00
Jared Boone
b82eff51dd Refactor of capture buffer management between cores. 
Instead of copying data into and out of FIFO, passing buffer pointers between cores that are sized to match preferred/ideal SD card write size.
 2016-05-10 14:12:37 -07:00
Jared Boone
4c57c1205f SD debug display more informative card type. 2016-05-09 22:49:26 -07:00
Jared Boone
91ae692f90 SD debug display CSD value. 2016-05-09 22:48:33 -07:00
Jared Boone
cc9c5acc3c Remove SD card debug "detected" field. 2016-05-09 22:42:54 -07:00
furrtek
a42f5beb9b Handwriting recognition 2016-05-10 07:20:24 +02:00
Jared Boone
03c6c80332 Factor out some SD card info formatting. 2016-05-09 21:53:01 -07:00
furrtek
4511090eae Unistroke in dirty code 2016-05-10 04:24:19 +02:00
furrtek
c8d37e215b Merge remote-tracking branch 'upstream/master' 
Conflicts:
	firmware/application/audio_thread.cpp
	firmware/application/event_m0.cpp
	firmware/application/time.cpp
	firmware/baseband-tx/clock_recovery.cpp
	firmware/baseband/stream_input.hpp
	firmware/common/message.hpp
 2016-05-09 21:16:24 +02:00
furrtek
569f299f42 Merge 2016-05-09 21:05:11 +02:00
furrtek
d40016ffda Fixed LCR and Xylos transmitters 2016-05-09 20:42:20 +02:00
Jared Boone
56a7b841cb Remove CaptureThread LED control. 2016-05-02 12:53:33 -07:00
Jared Boone
eeb4645242 Move lots of capture_thread code to .cpp. 2016-05-02 12:50:49 -07:00
Jared Boone
697df07501 Move Writer implementations to ui_record_view.cpp. 2016-05-02 12:34:42 -07:00
Jared Boone
97af4585b0 Missing #includes. 2016-05-02 12:26:53 -07:00
Jared Boone
2e6230e29c Rearrange UI code RecordView::start() to keep consistent in failure. 2016-05-02 11:55:53 -07:00
Jared Boone
3f36d8b7bf Push record file type support into RecordView. 2016-05-02 11:44:37 -07:00
Jared Boone
68faccfd10 Update Writer default destructor syntax. 2016-05-02 11:22:14 -07:00
Jared Boone
fa8105266c WAVFileWriter saves WAV files! 2016-05-01 11:31:20 -07:00
Jared Boone
80f94cbc29 Add File seek support. 2016-05-01 11:29:44 -07:00
Jared Boone
c5cae1034e Forgot virtual destructor on interface class. 
So my Files weren't getting closed properly!
 2016-05-01 11:29:19 -07:00
Jared Boone
0445a842db Rename args on Writer interface. 2016-05-01 11:07:50 -07:00
Jared Boone
2be105853e Shrink CaptureThread stack, undid earlier increase. 
Moved File into Writer abstraction, passed in now, not created on stack.
 2016-04-30 16:55:52 -07:00
Jared Boone
6a17be1f2c Abstract CaptureThread target class into Writer, implement RawFileWriter. 2016-04-30 16:34:50 -07:00
Jared Boone
b5fbab8e29 Pass a File into CaptureThread. 
Groundwork for having a general output-stream interface.
 2016-04-30 16:26:49 -07:00
Jared Boone
a2a2de9a23 Increase CaptureThread stack, now that File is created in new thread. 2016-04-30 15:13:54 -07:00
Jared Boone
0d6103916d Converge File object with std::fstream. Simplify LogFile. 
LogFile no longer watches SD card presence and tries to open/close files dynamically.
 2016-04-30 15:09:34 -07:00
Jared Boone
4d6fccd8ea Extract RecordView from AnalogAudioApp, CaptureApp. 2016-04-30 13:56:54 -07:00
Jared Boone
24192b4043 Capture: Write simple metadata for baseband and audio files. 
Will probably turn the audio metadata file into .wav data, eventually.
 2016-04-30 11:25:04 -07:00
Jared Boone
a6d41547a0 Make CaptureAppView capture functions same as AnalogAudioView. 2016-04-30 11:09:39 -07:00
Jared Boone
12b8a1b2a9 Change next-file naming functions to work on filename stems. 
This paves the way for writing metadata files with similar prefixes, and avoids confusing numbering of capture files with different extensions (e.g. BAD_0000.S16 and BBD_0000.S8).
 2016-04-29 11:27:12 -07:00
furrtek
d55a420dfd Fixed module loading (again), only audio tx works for now 2016-04-28 14:59:14 +02:00
Jared Boone
be9f3362da Display percent of data dropped during capture to SD card. 2016-04-27 12:07:31 -07:00
Jared Boone
6ee886b90e Expose capture state to the UI. 2016-04-27 12:06:47 -07:00
Jared Boone
11d15ec5b5 Add second tick handler for CaptureThread. 2016-04-27 12:03:43 -07:00
Jared Boone
8188b44439 Add Signal for per-second tick callbacks. 2016-04-27 12:02:17 -07:00
Jared Boone
7430e31578 Extract CaptureConfig from StreamOutput to CaptureThread. 
So capture stats can be exposed by CaptureThread.
 2016-04-27 10:56:50 -07:00
Jared Boone
75159fcc00 Use static StreamOutput::fifo for accessor methods. 2016-04-27 10:52:11 -07:00
Jared Boone
dc1ba7e6f3 Move CaptureThread::write_size into run(). 2016-04-27 10:44:44 -07:00
Jared Boone
ca5dadab93 Set CaptureThread::thread to null after thread is released. 
Was having a timing problem where ISR was still trying to signal thread after thread was nulled.
 2016-04-27 10:13:50 -07:00
Jared Boone
4a348e2c6c Revise CaptureThread loop to not get stuck if SD write speed too slow. 2016-04-27 10:12:21 -07:00
Jared Boone
91ee2dbb67 Move FIFO and write size to CaptureConfig structure. 
Now configured from baseband, where write size and appropriate FIFO size is known.
 2016-04-26 22:26:30 -07:00
Jared Boone
0662196905 Fix audio codec I2C reliability for some HackRF units. 2016-04-26 13:06:46 -07:00
Jared Boone
c585f3d4ea Rename EVT_FIFO_HIGHWATER -> EVT_MASK_CAPTURE_THREAD. 2016-04-23 17:30:55 -07:00
Jared Boone
3103e9b80e Remove unused EventDispatcher::thread_record. 2016-04-23 17:26:54 -07:00
Jared Boone
d5e21ce972 Use CaptureConfig to share state between cores. 
Remove awful FIFO_HACK.
TODO: Lots of repeated code...
TODO: Capture thread is signalled too frequently.
 2016-04-23 15:07:44 -07:00
Jared Boone
8b8b394792 Hide FIFO hack inside StreamOutput. 
First step in a long refactor and evolution of the capture code.
 2016-04-22 16:21:31 -07:00
Jared Boone
adf573be20 Add simple record UI to audio app. 2016-04-22 12:30:02 -07:00
Jared Boone
a6538bc48b Rename AudioThread -> CaptureThread. 
...since it's doing baseband capturing too, and doesn't really know what kind of data it's moving.
 2016-04-22 12:15:51 -07:00
Jared Boone
b8196ee2be Rename capture UI record objects and functions. 2016-04-22 12:08:01 -07:00
Jared Boone
f2453dd639 Consolidate bitmaps for reuse. 2016-04-22 11:57:46 -07:00
Jared Boone
27a1423309 De-constexpr a few UI constructors. 
Because it was silly.
 2016-04-22 11:18:35 -07:00
Jared Boone
61b5faf8b5 Clean up AnalogAudioView::on_show_options_modulation(). 2016-04-22 10:22:47 -07:00
Jared Boone
760c73a7be Move field.set_style()s after all participating widgets' styles are reset. 2016-04-22 10:16:42 -07:00
Jared Boone
c650536934 Hide remove_widget() in set_options_widget(). 2016-04-22 10:01:17 -07:00
furrtek
2fcfdba9ea "At least it builds !" 2016-04-21 22:12:51 +02:00
Jared Boone
09a39f780a Show capture file name. 2016-04-21 11:45:57 -07:00
Jared Boone
ee51d7fa67 Make room in capture mode for other controls. 2016-04-21 11:45:37 -07:00
furrtek
1b0da68d65 Merge remote-tracking branch 'upstream/master' 
Conflicts:
	firmware/application/Makefile
	firmware/application/core_control.cpp
	firmware/application/touch.cpp
	firmware/application/ui_debug.cpp
	firmware/application/ui_debug.hpp
	firmware/application/ui_navigation.cpp
	firmware/baseband/baseband_thread.cpp
 2016-04-21 20:36:19 +02:00
Jared Boone
857fba6309 Change justification of spectrum right tick label. 2016-04-21 11:36:07 -07:00
Jared Boone
e4b86d149c Change file recording behavior to create new file instead of appending. 2016-04-20 10:24:39 -07:00
Jared Boone
f38fca168e Use sequential file naming for baseband capture files. 2016-04-20 10:23:59 -07:00
Jared Boone
9d635b3fcf Use sequential file naming for audio recording. 2016-04-20 10:22:50 -07:00
Jared Boone
1c544a663b Use automatic file naming for screen capture .png files. 2016-04-20 10:22:05 -07:00
Jared Boone
f49d04fe7a Functions to select next filename based on matching pattern. 
Used for capture, audio, screenshot file naming.
 2016-04-20 09:57:17 -07:00
Jared Boone
7492984144 Add filesystem directory enumeration. 
Borrow API from std::filesystem -- Boost and C++17.
 2016-04-20 09:56:35 -07:00
Jared Boone
8119980370 Widen capture mode sampling rate, baseband filter. 2016-04-20 09:54:19 -07:00
Jared Boone
6de2df7c99 Enable FatFs f_findfirst, f_findnext. 2016-04-19 11:57:22 -07:00
Jared Boone
75cf0c2f4e Update ffconf.h 
Had to change codepage to 437 due to deprication of prior codepage 1252.
 2016-04-19 10:09:17 -07:00
Jared Boone
ec75c00da2 Add capture mode waterfall. 2016-04-13 11:09:18 -07:00
Jared Boone
2201a9e95f Change capture start/stop to toggle image button. 2016-04-12 11:37:58 -07:00
Jared Boone
cee5417a4a Capture UI basic controls. 
Tuning, LNA/VGA gain, second IF and "channel" RSSI. Use ReceiverModel, so that audio receiver parameters come across for quicker capture configuration.
 2016-04-12 10:56:00 -07:00
Jared Boone
10b28429e4 Add show-options event for VGAGainField. 2016-04-12 10:49:07 -07:00
Jared Boone
3e8b097588 Extract VGAGainField. 2016-04-12 10:48:24 -07:00
Jared Boone
40df73b923 Start/stop control of baseband capture. 2016-04-11 11:22:35 -07:00
Jared Boone
5558ca60d7 Enlarge capture buffers -- inter-core FIFO, SDC 2016-04-11 11:00:47 -07:00
Jared Boone
743dc9f542 Rough implementation of capture mode 2016-04-11 10:59:55 -07:00
Jared Boone
4a1d3b14a1 Open AudioThread file on new thread. 
Opening it in constructor was causing UI pauses.
 2016-04-11 10:20:19 -07:00
Jared Boone
03dfd2b48e ...and more AudioThread cleanup. 2016-04-11 10:20:19 -07:00
Jared Boone
14d1b5fd72 Further AudioThread cleanup. 2016-04-11 10:20:19 -07:00
Jared Boone
feeb5bff6f Move AudioThread con/destruction to proper places. 2016-04-11 10:20:19 -07:00
Jared Boone
08f4542954 Marginal attempt to simplify stream write loop. 2016-04-11 10:20:19 -07:00
Jared Boone
fc8bb635a6 Consider an incomplete write as an error. 2016-04-11 10:20:19 -07:00
Jared Boone
ba3c9dd8d1 Insist on writing stream data in buffer-sized blocks. 
Maintaining alignment improves SD card write performance significantly.
 2016-04-11 10:20:19 -07:00
Jared Boone
b3e2e89e51 Create audio recording thread in the right place. 
Was always creating, finding a timing issue when switching baseband modes, would freeze, probably due to a dangling pointer. TODO: Make stream recording setup synchronous.
 2016-04-11 10:20:19 -07:00
Jared Boone
8e14d2f4e8 Signal SD card write thread from M4 event. 2016-04-11 10:20:19 -07:00
Jared Boone
daa2f7aed0 Drain write FIFO, don't read just one block. 2016-04-11 10:20:19 -07:00
Jared Boone
aca19ae997 Factor out SD card write size. 2016-04-11 10:20:19 -07:00
Jared Boone
f94938db8e De-template FIFO. 2016-04-11 10:20:19 -07:00
Jared Boone
59f1a32566 Semi-naive audio recording to SD card. 2016-04-11 10:20:19 -07:00
Jared Boone
f09d803e61 Use correct SDC card present function. 
Was using the LLD function directly -- no!
 2016-04-10 17:29:14 -07:00
Jared Boone
9e1b88d85f Enable FATFS fast seek feature. 
Handy when appending to large baseband files.
 2016-04-10 17:27:36 -07:00
Jared Boone
4ac2c540c9 Disable SDC "nice waiting" for performance. 
Quick test indicates 4.5% better average write performance. No change in reads.
 2016-04-10 17:24:28 -07:00
Jared Boone
0cb923be6d Add SD card debug view. 
Bus and card configuration data, write and read testing.
 2016-04-10 17:16:39 -07:00
Jared Boone
0a9d7ec8d8 Add File::open_for_reading(). 
Barf.
 2016-04-10 15:56:34 -07:00
Jared Boone
38ba02a68f Change File::open to File::open_for_writing. 
Not thrilled about the File API right now...
 2016-04-10 15:55:01 -07:00
Jared Boone
b35a8c4501 Add TPMS signal_type. 2016-04-06 17:04:40 -07:00
Jared Boone
635b1fd4c3 Extract TPMS packet stuff to separate files. 2016-04-06 17:01:54 -07:00
Jared Boone
b7c0efbb64 Add ERT commodity type. 2016-04-06 16:16:10 -07:00
Jared Boone
bf348cf30a Move message handling loops to MessageQueue. 2016-02-27 21:07:11 -08:00
Jared Boone
7f663f7e0c Remove unused code. 2016-02-22 14:18:20 -08:00
Jared Boone
52016defd5 Capture screen image, save to PNG file on SD card. 2016-02-19 15:34:02 -08:00
Jared Boone
ac6af17b94 Fix extra, empty menu items in DebugMenuView. 
Added TODO to prevent default construction of menu items, making this a compiler error in the future.
 2016-02-19 11:22:22 -08:00
Jared Boone
40d7f3a134 Add screen capture button. 2016-02-18 21:35:46 -08:00
Jared Boone
7cf55cef52 Add File::write() that takes std::array. 2016-02-18 21:34:03 -08:00
Jared Boone
083711ceb2 Add File::open(), use inside File::open_for_append(). 2016-02-18 21:33:38 -08:00
Jared Boone
6b97490794 Fix SD error icon. 
Was missing the left half of the "X".
 2016-02-18 21:32:25 -08:00
Jared Boone
1e0d34c98b CRC internal type more suitable for ARM. 2016-02-18 21:31:51 -08:00
Jared Boone
c12833a288 Factor out a common rectangle. 2016-02-16 15:17:06 -08:00
Jared Boone
0681f9c5df Init message queues in M0 event dispatcher. 2016-02-16 11:23:02 -08:00
Jared Boone
7ec476cb79 Rename m4_startup.* to more appropriate core_control.* 
Now that there is M0- and M4-related code.
 2016-02-16 11:09:00 -08:00
Jared Boone
7fbe57931e Push M0 halt code into a function. 2016-02-16 11:04:35 -08:00
Jared Boone
64da082306 Remove dead test code. 2016-02-16 10:28:35 -08:00
Jared Boone
3e2b6087c2 Tighten up radio API, stop leaking 1st/2nd IF instances. 2016-02-16 10:28:13 -08:00
Jared Boone
7d60b940d6 Push hardware peripherals debug views into a sub-menu. 2016-02-12 15:05:47 -08:00
Jared Boone
c72a443738 Relabel ChibiOS core free bytes. 2016-02-12 13:51:14 -08:00
Jared Boone
937dad62ee Create log files on heap. 
...for imminent refactor where user can manually start/stop logging, and maybe even change the filename! *swoon*
 2016-02-10 20:53:14 -08:00
Jared Boone
58864ebbe7 Remove extra #includes. 2016-02-10 20:19:27 -08:00
Jared Boone
22e44605b6 Hide baseband queue code inside baseband "API". 2016-02-10 20:11:19 -08:00
Jared Boone
49a89b9dee Single function to configure/enable radio. 2016-02-10 16:58:25 -08:00
Jared Boone
692a262f41 Use TPMS sampling_rate variable instead of literal. 2016-02-10 16:48:09 -08:00
Jared Boone
f5cdf8ed76 Remove unused radio:: function. 2016-02-10 16:47:36 -08:00
Jared Boone
472b0a2e79 ReceiverModel no longer uses some baseband modes. 2016-02-10 16:32:25 -08:00
Jared Boone
5cdbae495a Digital modes no longer use ReceiverModel. 
AIS/TPMS/ERT were changing receiver mode settings -- not my intent.
 2016-02-10 16:31:52 -08:00
Jared Boone
3587300701 Remove extra #include. 2016-02-10 16:19:31 -08:00
Jared Boone
6c06549b6e Remove reference PPM methods from ReceiverModel. 2016-02-10 15:34:33 -08:00
Jared Boone
3a709c51c4 Hide more Widget member variables. 2016-02-07 10:40:06 -08:00
Jared Boone
8f8a9f2b63 Fix back button repaint/focus quirks. 2016-02-07 10:33:15 -08:00
Jared Boone
7cb3bbc9f8 Make Widget flags private, expose via methods. 2016-02-07 10:32:38 -08:00
Jared Boone
9a33fc884a More arguments pass-by-reference. 2016-02-06 16:44:19 -08:00
Jared Boone
cd56847326 Remove some unused member variables. 2016-02-06 16:23:38 -08:00
Jared Boone
3172fb1ad6 Make assorted arguments pass-by-reference. 2016-02-06 16:23:20 -08:00
furrtek
ba94ce55ef Loadmodule emergency fix 2016-02-06 23:19:28 +01:00
Jared Boone
a9451c17b4 Move PPB clock adjustment out of ReceiverModel. 2016-02-05 16:52:34 -08:00
Jared Boone
682c87e3ff Wrap baseband sampling rate function to radio:: function. 2016-02-05 16:36:36 -08:00
Jared Boone
0294165481 Extract LOTS of stuff into an audio API. 
Prevent all manner of type and implementation leakage.
 2016-02-05 16:25:43 -08:00
Jared Boone
1b793da17f Expose I2C0 via portapack.hpp. 2016-02-05 16:21:03 -08:00
Jared Boone
9430c94dec Move I2S management to application side. 2016-02-05 15:25:08 -08:00
furrtek
c81ba5be8e "At least it builds, now" 2016-02-05 17:40:14 +01:00
Jared Boone
94a6d8340d Add left key navigation out of newer menus. 
TODO: Ripe for a base class or something.
 2016-02-04 12:17:10 -08:00
furrtek
8009a9b543 Merge remote-tracking branch 'upstream/master' 
Conflicts:
	firmware/application/Makefile
	firmware/application/analog_audio_app.cpp
	firmware/application/analog_audio_app.hpp
	firmware/application/event.cpp
	firmware/application/irq_ipc.hpp
	firmware/application/portapack.hpp
	firmware/application/receiver_model.cpp
	firmware/application/receiver_model.hpp
	firmware/application/recent_entries.cpp
	firmware/application/string_format.hpp
	firmware/application/ui_debug.cpp
	firmware/application/ui_debug.hpp
	firmware/application/ui_menu.cpp
	firmware/application/ui_navigation.cpp
	firmware/application/ui_navigation.hpp
	firmware/application/ui_receiver.cpp
	firmware/application/ui_receiver.hpp
	firmware/application/ui_sd_card_status_view.cpp
	firmware/application/ui_sd_card_status_view.hpp
	firmware/application/ui_setup.cpp
	firmware/application/ui_setup.hpp
	firmware/application/ui_spectrum.hpp
	firmware/baseband-tx/dsp_fir_taps.cpp
	firmware/baseband-tx/dsp_fir_taps.hpp
	firmware/baseband-tx/irq_ipc_m4.cpp
	firmware/baseband-tx/irq_ipc_m4.hpp
	firmware/baseband-tx/proc_audiotx.cpp
	firmware/baseband/Makefile
	firmware/baseband/audio_output.cpp
	firmware/baseband/audio_output.hpp
	firmware/baseband/block_decimator.hpp
	firmware/baseband/dsp_decimate.cpp
	firmware/baseband/dsp_decimate.hpp
	firmware/baseband/dsp_demodulate.cpp
	firmware/baseband/dsp_demodulate.hpp
	firmware/baseband/dsp_fir_taps.cpp
	firmware/baseband/irq_ipc_m4.cpp
	firmware/baseband/irq_ipc_m4.hpp
	firmware/baseband/proc_am_audio.cpp
	firmware/baseband/proc_am_audio.hpp
	firmware/baseband/proc_nfm_audio.cpp
	firmware/baseband/proc_nfm_audio.hpp
	firmware/baseband/proc_wfm_audio.cpp
	firmware/baseband/proc_wfm_audio.hpp
	firmware/baseband/spectrum_collector.hpp
	firmware/common/dsp_fir_taps.cpp
	firmware/common/dsp_fir_taps.hpp
	firmware/common/event.hpp
	firmware/common/message.hpp
	firmware/common/ui_painter.cpp
	firmware/common/ui_painter.hpp
 2016-02-04 11:35:55 +01:00
furrtek
6e496e2b26 Merge fixing, commit to catch up on recent files 2016-02-04 10:27:53 +01:00
Jared Boone
5d4e59271a Switch display sleep button to ImageButton. 2016-02-03 16:14:34 -08:00
Jared Boone
dd6d56cff8 SD card status view inherits from new Image class. 2016-02-03 15:50:14 -08:00
Jared Boone
e57659d4cf Convert SD card view to show icon/color for status. 2016-02-03 13:24:38 -08:00
Jared Boone
e2a82061d4 Update SD card status when view is shown. 2016-02-03 10:34:17 -08:00
Jared Boone
d9be5677e3 Simplify handling of modulation config changes via UI. 2016-02-02 15:20:14 -08:00
Jared Boone
10c7c57fd1 Expose modulation configuration indices. 2016-02-02 15:19:43 -08:00
Jared Boone
1cf38387c1 Initialize modulation from ReceiverModel. 2016-02-02 15:01:04 -08:00
Jared Boone
d82cbcb1c4 Rework modulation options views handling. 
Still not pretty, but a bit simpler. I think...
 2016-02-02 14:26:00 -08:00
Jared Boone
3f86a7c4ae Add AM/NBFM configuration options views. 2016-02-02 13:42:00 -08:00
Jared Boone
fece0a5e1b Move modulation configuration into ReceiverModel. 2016-02-02 13:39:02 -08:00
Jared Boone
cbaa04ff07 Reorganize analog audio configs structures. 2016-02-02 11:02:07 -08:00
Jared Boone
ee67948a63 Simplify AnalogAudioView mode switching. 2016-02-01 09:17:32 -08:00
Jared Boone
afffdba150 AnalogAudioView::on_show() is a no-op, remove. 2016-02-01 09:13:17 -08:00
Jared Boone
c5f8daa210 Restore use of ReceiverModel::Mode enum. 2016-02-01 09:12:55 -08:00
Jared Boone
4d3294c228 Move ReceiverView code to AnalogAudioView. 
ReceiverView predated the "app" model, was serving as a shell for *all* radio activity, but became outmoded and redundant when non-audio modes were split out into separate apps.

Some stuff is broken in this change, will be fixed imminently.
 2016-01-31 09:13:44 -08:00
furrtek
44638e504b SYNC 2016-01-31 09:34:24 +01:00
furrtek
7e56183986 Sync 2016-01-31 08:37:08 +01:00
Jared Boone
f134e63f05 Initialize Spectrum FIFO pointer to nullptr. 2016-01-30 22:23:22 -08:00
Jared Boone
a97cd642ac Multiple AM modes selection in application API. 2016-01-30 19:03:32 -08:00
Jared Boone
e778be6472 Selection of AM/SSB from application side. 2016-01-30 18:02:28 -08:00
Jared Boone
f2dff16820 Use complex channel filter taps for AM/SSB. 2016-01-30 17:30:54 -08:00
Jared Boone
1915ff980f Add AM processor decim_2. 2016-01-30 17:28:11 -08:00
Jared Boone
b029bacd8c Remove channel decimation from AMConfigureMessage. 2016-01-30 17:21:48 -08:00
Jared Boone
2fd8b1c4d4 Bodge in preset control of NBFM bandwidth/deviation. 2016-01-29 21:05:43 -08:00
Jared Boone
aead1d8798 Change NBFM audio fs->24k, AM ->12k. 
Send channel decimation factor from application to baseband.
 2016-01-29 19:23:30 -08:00
Jared Boone
96898f82b2 Pass IIR configs from application to baseband. 2016-01-29 15:57:20 -08:00
Jared Boone
db642cac8d Change audio sampling rates on NBFM, AM modes. 2016-01-29 15:33:01 -08:00
furrtek
107c212d88 Completely useless "about" screen 
Paved road for talking Xylos RX and logger
Added test button for Xylos TX
Fixed jammer crashing after loading second time
 2016-01-30 00:28:05 +01:00
Jared Boone
0cf839bc93 Expose instance clock_manager in portapack.hpp. 2016-01-29 15:21:33 -08:00
Jared Boone
a03a72474d Insert IDIVC into audio MCLK path, so it can be divided. 2016-01-29 15:17:05 -08:00
Jared Boone
b801366e4e Recover from display sleep, use LCD sleep function. 2016-01-27 21:05:28 -08:00
Jared Boone
894d4b955c Unclever first attempt at display sleep. 2016-01-27 20:33:54 -08:00
Jared Boone
1caf6952d8 Remove GCC-isms interfering with host-based testing. 2016-01-27 20:20:34 -08:00
Jared Boone
10f6554a1b Remove extra #include. 2016-01-27 20:17:35 -08:00
Jared Boone
234ac5c50b Additional audio receiver step sizes. 
Requested in issue #52, pull request #56. Added with qualifications the smaller step sizes, and a couple of more VHF-/UHF-y step sizes.
 2016-01-27 16:04:23 -08:00
Jared Boone
7876eb0877 Remove PPM "Corr." label. 2016-01-27 15:26:39 -08:00
Jared Boone
87dc5a055b More application of range_t methods. 2016-01-27 14:55:03 -08:00
Jared Boone
7519b83379 Make better use of range_t methods. 2016-01-27 14:46:45 -08:00
Jared Boone
ca3b1a2c5a Remove more commented code. 2016-01-27 14:25:08 -08:00
Jared Boone
3b7bec542c Move and adjust variable controlling size of audio RX waterfall. 
Closes recently-opened gap between control UI and waterfall.
 2016-01-27 14:20:15 -08:00
Jared Boone
6917a38106 Improve clipping of RSSI, baseband, audio bar graphs. 2016-01-27 12:50:33 -08:00
Jared Boone
c761d3aaa8 Fix RSSI meter scaling, clean up limits code. 2016-01-27 11:48:22 -08:00
Jared Boone
87a6f931c9 Remove commented and unused code. 2016-01-27 11:03:37 -08:00
Jared Boone
34434c088c Clean up audio receiver UI fields layout. 2016-01-27 11:01:50 -08:00
Jared Boone
60778c5591 Another tweak to sane-ify transponder apps initial focus. 2016-01-27 10:49:17 -08:00
Jared Boone
07b8c6c661 Fix initial focus on ERT, TPMS apps. 2016-01-27 10:18:44 -08:00
Jared Boone
cb403160b3 Really dumb list view columns structures. 2016-01-27 09:02:17 -08:00
Jared Boone
cac9f02c48 Add simple column headers to recents list views. 2016-01-26 17:25:51 -08:00
Jared Boone
bd829d7d85 Add titles for transponder apps. 2016-01-26 13:08:46 -08:00
Jared Boone
7fe8288737 Set Navigation title with View.title() if not empty. 2016-01-26 13:04:44 -08:00
Jared Boone
dc42525dcb Oops, removed line that should've been in prior commit. 2016-01-26 13:04:19 -08:00
Jared Boone
a13e19a907 Paint background of Text object before string. 2016-01-26 13:00:36 -08:00
Jared Boone
c1f7f23367 Add AIS channel control. 2016-01-25 11:47:59 -08:00
Jared Boone
8b0e6e65c8 Configure radio in AIS, ERT, TPMS apps. 2016-01-25 11:22:39 -08:00
Jared Boone
15800eea33 Move nav back button outside of ReceiverView. 2016-01-25 11:13:19 -08:00
Jared Boone
029a44e24c Missing header. 2016-01-24 22:38:45 -08:00
Jared Boone
5ecc6d0330 Add Receiver sub-menu, Transponders item and sub-menu. 2016-01-24 22:38:36 -08:00
Jared Boone
e04e72abe7 Remove unused ReceiverView() receiver_model arg. 2016-01-24 22:12:16 -08:00
Jared Boone
db2f78f0f8 ERTAppView, recent entries tracking and display. 2016-01-23 22:24:48 -08:00
Jared Boone
56218565c1 Use TPMS declared invalid_key as default initializer values. 2016-01-23 21:52:42 -08:00
Jared Boone
fedecbeca5 Extract ERT formatting code to free functions. 2016-01-23 21:46:41 -08:00
Jared Boone
d888c77661 Remove TPMS commented code. 2016-01-23 21:38:43 -08:00
Jared Boone
4d5697cda7 Simplify TPMS units static_casts. 2016-01-23 21:38:33 -08:00
Jared Boone
798b5eb972 Extract Temperature, Pressure into units header. 2016-01-23 21:37:22 -08:00
Jared Boone
45a8759d7b Remove silly types on Temperature/Pressure getters. 2016-01-23 21:29:27 -08:00
Jared Boone
45ae222ab5 Extract Optional to own header. 2016-01-23 21:26:06 -08:00
Jared Boone
cca8c6dc06 ERTModel -> ERTLogger, now ERTApp does setup. 2016-01-23 21:17:04 -08:00
Jared Boone
e4f5539407 Remove unused variables. 2016-01-23 17:53:33 -08:00
Jared Boone
14f18d5cf7 Reduce use of unsigned integers when signed will do fine. 2016-01-23 17:53:16 -08:00
Jared Boone
ce481c0b5a Clean up UI type static_casts. 
So disgusting, but not entirely gone yet...
 2016-01-23 17:02:16 -08:00
Jared Boone
60b8b38652 UI to turn on antenna bias voltage. 2016-01-23 11:32:10 -08:00
Jared Boone
25fac90d4f Improve radio state management re: antenna bias voltage. 
Responsibility for radio state is still rather muddy...
 2016-01-23 11:31:50 -08:00
Jared Boone
10d4172d5c RF antenna bias voltage control API. 2016-01-23 11:30:00 -08:00
Jared Boone
02b3e891f7 TPMS RecentEntriesView and related stuff. 
Replaces Console listing of raw records.
 2016-01-22 15:00:25 -08:00
Jared Boone
13c0999c3c Move Optional outside tpms namespace. 2016-01-22 13:41:01 -08:00
Jared Boone
54fb85a9d0 Un-const Optional class members. 2016-01-22 13:40:15 -08:00
Jared Boone
b70138ad58 Introduce TPMS measurement types, change formatting. 2016-01-22 10:59:41 -08:00
Jared Boone
bd0ec913f5 Invert TPMS Manchester decoding, fix dependent CRC/checksums. 2016-01-20 09:02:25 -08:00
Jared Boone
5e6a76dfe7 Use a proper enum for TPMS signal type. 2016-01-18 22:28:33 -08:00
Jared Boone
9a41961aeb Store TPMS "packet type". 
For now, completely dumb CRC-OK packet length, since I only handle three packet types, which differ in length.
 2016-01-18 22:18:49 -08:00
Jared Boone
7ad9ad2596 TPMS packets to IDs and values. 2016-01-18 21:42:26 -08:00
Jared Boone
dbea30b9e4 Check TPMS CRCs for packets I know, don't display the rest. 2016-01-18 20:43:54 -08:00
Jared Boone
fbcf784959 Make tpms::Packet into real type. 2016-01-18 14:34:30 -08:00
Jared Boone
feec99ac6a Move TPMS packet handling to TPMSAppView. 
Also rename TPMSModel to TPMSLogger, considering that's what it was *really* doing.
 2016-01-18 14:21:24 -08:00
Jared Boone
32818ee9ab Introduce tpms::Packet type. 2016-01-18 13:54:07 -08:00
Jared Boone
be328c5f38 Rearrange TPMS app/UI code. 2016-01-18 13:41:19 -08:00
Jared Boone
1a280149e2 Rename TPMSView -> TPMSAppView. 2016-01-18 13:29:11 -08:00
Jared Boone
6e5e48cc7c Clear region below RecentEntries list. 2016-01-17 21:56:06 -08:00
Jared Boone
05d7e0222f Extract RecentEntries stuff to separate files. 2016-01-17 21:42:15 -08:00
Jared Boone
df3ce07c5c Template AISRecentEntriesView. 
More teasing apart, not sure where this will end...
 2016-01-17 20:49:41 -08:00
Jared Boone
eda6e6a5be Move AIS recent items list draw function back into class. 2016-01-17 19:08:08 -08:00
Jared Boone
fb8e5b21df Use AIS MMSI string formatter, remove right-justification. 2016-01-17 18:07:39 -08:00
Jared Boone
3ee6fd3d87 Generalize AISRecentEntries -> templated RecentEntries. 
Also access Entry unique key via key().
 2016-01-17 18:06:31 -08:00
Jared Boone
5a864d8d44 Generalize RecentEntries find() method name. 2016-01-17 15:56:29 -08:00
Jared Boone
fc7a7d753d Extract general File class from LogFile. 2016-01-17 14:20:02 -08:00
Jared Boone
be44c21172 Move AIS received packet count to bottom of details view. 2016-01-15 18:15:50 -08:00
Jared Boone
93aea59847 Add AIS last position timestamp to details view. 2016-01-15 18:15:34 -08:00
Jared Boone
6ead63d02d Extract timestamp formatting to string_format. 2016-01-15 18:15:05 -08:00
Jared Boone
de98dfe10b AUS consolidated lat/lon formatting. 2016-01-15 17:59:02 -08:00
Jared Boone
b5ac76afc4 Tiny code clean-up. 2016-01-15 17:58:27 -08:00
Jared Boone
8fd8815e95 Remove irrelevant comments. 2016-01-15 16:00:21 -08:00
Jared Boone
cb5f563b92 Push more common AIS lat/lon formatting into common function. 2016-01-15 15:59:04 -08:00
Jared Boone
8fa8a26298 Read SD card status in SDCardStatusView constructor. 
View was not showing correct status if card was present at boot.
 2016-01-15 15:31:32 -08:00
Jared Boone
5ddb99237e Move AIS entry details "done" button down a bit. 2016-01-15 15:26:04 -08:00
Jared Boone
f3989050e8 Clean up AIS lat/lon types and formatting. 2016-01-15 15:25:32 -08:00
Jared Boone
1e92d416c7 More AIS position report detail. 2016-01-15 15:21:45 -08:00
Jared Boone
70d349e1a7 Change default AIS navigational status to "unknown". 2016-01-15 13:39:40 -08:00
Jared Boone
8603c567ca Unjustify AIS RX packet count. 2016-01-15 13:25:17 -08:00
Jared Boone
f292d5038a Set AISRecentEntryDetailView dirty when entry changes. 2016-01-15 11:39:39 -08:00
Jared Boone
e163ed7463 Update recent entry detail when recent entry changes. 
This doesn't feel like the right implementation, but I'm feeling impatient today...
 2016-01-15 11:38:49 -08:00
Jared Boone
c4f7d9bf54 Return updated AIS RecentEntry. 2016-01-15 11:38:09 -08:00
Jared Boone
19e3b273ad Expose current RecentEntry from detail view. 2016-01-15 11:37:37 -08:00
Jared Boone
089ef25df9 Draw AIS entry details. 2016-01-15 11:23:28 -08:00
Jared Boone
aa249cbad4 Add AIS detail view. 2016-01-14 22:39:58 -08:00
Jared Boone
b1707298b7 Extract weird range-of-entries algorithm out of view. 2016-01-14 11:49:19 -08:00
Jared Boone
f8d9cb318d Prevent AISAppView painting. 
View is always filled with children, no need to clear background before painting children.
 2016-01-14 09:56:06 -08:00
Jared Boone
9fd93b0af6 Remove redundant focus tracking code. 2016-01-14 09:45:29 -08:00
Jared Boone
6e0aa79d44 Move app-level config to new AISAppView class. 2016-01-14 09:41:58 -08:00
Jared Boone
1f2b28b2b8 Add AISAppView. 2016-01-14 09:30:23 -08:00
Jared Boone
fc16bc7867 Rename AISView to AISRecentEntriesView. 
Coming soon, top-layer AISAppView.
 2016-01-14 09:19:16 -08:00
Jared Boone
bd07e4e7e5 Modify LogFile to open/close file on SD card status. 
Previously, would only open on construction, which was only when the receiver mode changed, which wasn't all that useful.
 2016-01-13 23:11:19 -08:00
Jared Boone
30ca545b52 Expose current SD card status. 2016-01-13 23:08:22 -08:00
Jared Boone
8a30003ab6 Move entry update code into AISRecentEntry. 2016-01-13 22:27:30 -08:00
Jared Boone
8efeb049ca Use std::begin(), std::end() where appropriate. 2016-01-13 18:06:45 -08:00
Jared Boone
af8630a6f3 Dedupe code, call AISRecentEntries::find_by_mmsi(). 2016-01-13 18:04:50 -08:00
Jared Boone
3df003a678 Rename AISRecentEntries::find -> find_by_mmsi. 2016-01-13 18:04:04 -08:00
Jared Boone
2888257167 Extract AISRecentEntries from AISView. 2016-01-13 18:01:38 -08:00
Jared Boone
01741f3c7c Rename AISModel to AISLogger. 
That's really what it is. Also move receiver initialization to AISView. It'll eventually move further out to an AISApp, once I figure out what an App looks like...
 2016-01-13 17:05:19 -08:00
Jared Boone
8c34e116af Remove Signal use, register message handler in View. 
Changed my mind from earlier commit...
 2016-01-13 17:00:53 -08:00
Jared Boone
94b73d7825 AISView constructors out of header. 2016-01-13 16:44:01 -08:00
Jared Boone
f8a063312c AISModel receive packets from baseband, notifies AISView. 
Use Signal class to distribute packets to multiple listeners.
 2016-01-13 16:32:56 -08:00
Jared Boone
9cab3c9978 Remove message_map from Context. 
It doesn't belong in a display/rendering context object, it has much broader significance, mostly distributing messages via the M4->M0 IPC mechanism.
 2016-01-13 15:46:04 -08:00
Jared Boone
d380ffe52b Extract AIS record renderer from AISView. 2016-01-13 11:56:23 -08:00
Jared Boone
a29b76ac38 Pull AIS record types out of AISView. 2016-01-13 11:52:39 -08:00
Jared Boone
4b2157a938 Push AIS list item draw style into render method. 2016-01-13 11:43:21 -08:00
Jared Boone
f06d5989db Move EventDispatcher code out of .hpp. 2016-01-12 22:20:13 -08:00
Jared Boone
731cea1b96 Move event.* code into event_m[04].*. 
Slightly more duplication of code now. Need a base class...
 2016-01-12 22:00:42 -08:00
Jared Boone
e73a9f98a1 Move EventDispatcher code into event_*.hpp. 
More code redistribution coming shortly...
 2016-01-12 21:49:29 -08:00
Jared Boone
146caaab6f Consolidate baseband disable code. 2016-01-10 11:10:13 -08:00
Jared Boone
d9bfaaf805 Stop baseband streaming when switching radio configuration. 
Probably unnecessary, but feeling paranoid about changing sample rates while there's a processor actively handling samples, and potentially maxing out the M4 core.
 2016-01-10 11:01:54 -08:00
Jared Boone
d821afc60d Spectrum streaming control, spectrum attributes back in each frame. 
TODO: This feels kinda complex, and there's some repeated Processor code that needs to be refactored into a base class.
 2016-01-10 10:42:20 -08:00
Jared Boone
0647f26707 Move SGPIO configuration and control to baseband firmware. 
Addresses long-standing and annoying bug where SGPIO DMA channel would not disable -- and not configure cleanly next time it was needed. My theory is that the DMA channel couldn't disable until it got a request from the peripheral, and sometimes the peripheral was disabled before that last request.

Anyway, the baseband firmware should control the SGPIO, methinks, despite the impact on baseband code size.
 2016-01-10 10:23:39 -08:00
Jared Boone
43d6098c48 Move baseband_sgpio.* to common/. 
It'll soon be used by M4 code, not M0. SGPIO baseband streaming needs to be tightly controlled by... the baseband!
 2016-01-09 17:57:37 -08:00
Jared Boone
c3167ac27c Missing #includes. 2016-01-09 12:17:17 -08:00
furrtek
1e71a10346 UI options: backlight auto-off, splash screen toggle 2016-01-07 14:17:39 +01:00
Jared Boone
7710b2d1fa ChannelSpectrumConfig message subsumes FIFONotify. 
Separate channel spectrum config from spectrum data. This will permit sending config info only when necessary.
Use type information of ChannelSpectrum to statically define number of FFT bins elsewhere.
TODO: Posting configuration message way too often. Fixing that is the next step.
 2016-01-06 12:10:30 -08:00
Jared Boone
ba33cc737d Transmit DisplayFrameSync message, handle in WaterfallSpectrum. 
More kludginess, especially around initialization and timing. But it addresses the flickering lines of pixels at the bottom of the waterfall scroll area!
 2016-01-06 11:36:57 -08:00
Jared Boone
aaa1bc3a09 Transmit ChannelSpectrum data through separate FIFO. 
Allows handling of data during LCD "vertical retrace", independent of other baseband->application messages. A bit kludgy still...
 2016-01-06 11:34:41 -08:00
furrtek
496c77fe3e Module loading should work again 
Modules won't load if already loaded (dirty footprint hack)
 2016-01-05 20:17:55 +01:00
furrtek
3477a2691a Added missing files, ENUMed modulation modes 2016-01-05 11:47:46 +01:00
Jared Boone
c1e5577669 Eliminate duplicate code between event_m4.hpp, event.hpp. 
event.* is common code, _m0 and _m4 contain specific event mask definitions.
 2016-01-04 12:54:05 -08:00
Jared Boone
0fe5409357 Move M4TXEVENT interrupt control into event handler run(). 2016-01-04 12:15:35 -08:00
Jared Boone
69b258cc2b Consolidate event handler code, including IRQ. 2016-01-04 12:15:10 -08:00
Jared Boone
b058c0fe00 Consolidate M0-specific code. 2016-01-04 12:07:30 -08:00
Jared Boone
b5aa2b205f Implement AMConfigureMessage from M0 to M4. 2016-01-03 14:31:39 -08:00
Jared Boone
f2f7032615 Wideband FM configuration messages from M0. 2016-01-03 13:38:55 -08:00
Jared Boone
7496c2aced Send NBFM configuration message from M0 to M4. 2016-01-03 12:47:22 -08:00
furrtek
802ac496e9 Xylos (CCIR tones) TX, jammer update, SD card mod load 
Xylos TX (CCIR tones) ;)
Jammer update, still buggy and inefficient
SD card module loader update
 2016-01-03 07:24:30 +01:00
Jared Boone
df593c2f0f Run codec at 1 x baseband sample rate. Do not use CPLD decimator. 
Codec performance appears to be unaffected by <8MHz sample rate. Saves a bit of power, eliminates dependency on CPLD decimation feature.
 2015-12-29 10:55:55 -08:00
Jared Boone
b38338efc0 Keep MAX2837 in standby so temperature can be read. 
I think this won't significantly impact power consumption.
 2015-12-17 20:59:21 -08:00
Jared Boone
1146d1fa06 Clean up temperature sensor rendering. 2015-12-17 20:36:58 -08:00
Jared Boone
188f692195 Center temperature graph in view. 2015-12-17 12:18:25 -08:00
Jared Boone
c3116eac63 Use reference to temperature logger, more concise. 2015-12-17 12:16:26 -08:00
Jared Boone
c92138f4b3 Extract calculation of temperature from raw sensor value. 2015-12-17 12:14:28 -08:00
Jared Boone
146a06b0d1 Method to read TemperatureLogger record capacity. 2015-12-17 12:12:22 -08:00
Jared Boone
17d405ccec Weird syntax burp on my part. 2015-12-17 10:30:40 -08:00
Jared Boone
3151100e50 Correct aesthetic typo in MAX2837 register defaults. 2015-12-16 22:37:55 -08:00
Jared Boone
86edf01def Quick and dirty temperature logger, debug view of temp vs. time. 2015-12-16 22:36:51 -08:00
Jared Boone
d34499d920 Remove ui::BasebandBandwidthField. 2015-12-16 22:29:29 -08:00
Jared Boone
7a4604e24e Move code out of ui_spectrum.hpp. 2015-12-16 19:33:30 -08:00
Jared Boone
4ce27f51d4 Add WM8731 registers view. 2015-12-14 12:09:31 -08:00
Jared Boone
ee3a77f32c Center RegistersWidget painting. 2015-12-14 11:47:43 -08:00
Jared Boone
56c3167156 Move RegistersWidget/Views methods to .cpp. 2015-12-14 11:30:24 -08:00
Jared Boone
2ee072aa7b Invert register number column colors in RegistersWidget. 2015-12-14 11:24:48 -08:00
Jared Boone
a340cbb74b Make NavigationView an implicit first argument to any instance pushed onto nav stack. 2015-12-14 11:18:59 -08:00
Jared Boone
0828c66b8a Move default constructor to .hpp. 2015-12-14 11:12:12 -08:00
Jared Boone
969d9bd070 Use std::unique_ptr inside NavigationView. 2015-12-14 11:11:49 -08:00
Jared Boone
18c4672ba2 Clean up navigation stack alloc/delete sequence. 2015-12-14 10:52:08 -08:00
Jared Boone
97f29f8336 Clean up UI navigation push constructor scheme. 2015-12-14 10:22:42 -08:00
Jared Boone
a1aa6ecdbf Eliminate per-device Views and RegisterWidgets, virtual methods. 
Nice code size improvement, despite supporting three device register sets instead of just one.
 2015-12-13 21:28:39 -08:00
Jared Boone
a0fbfcf6a2 Consolidate code and improve reuse between RegistersWidgets. 2015-12-13 13:22:09 -08:00
Jared Boone
94805285e2 Remove RegisterMap accessors. 2015-12-13 13:20:22 -08:00
Jared Boone
2fe1285c11 Un-inline register read/write functions. 2015-12-13 13:18:37 -08:00
Jared Boone
041e211841 Expose register read functions. 2015-12-13 13:18:05 -08:00
Jared Boone
74aa2112f4 Add Si5351C register view, make more space in all register views. 2015-12-13 12:34:51 -08:00
Jared Boone
5df1665994 Class divider comments. 2015-12-13 11:50:55 -08:00
Jared Boone
32108a8229 Field for register set name was too narrow. 2015-12-13 11:50:31 -08:00