Jared Boone
365c2ef946
Handle baseband::dma::wait_for_rx_buffer() returning empty buffer.
...
Was technically OK before, because sample count was zero. But seems silly (and vaguely dangerous) to call all that code with a nullptr.
2016-01-09 12:20:57 -08:00
Jared Boone
c3167ac27c
Missing #includes.
2016-01-09 12:17:17 -08:00
Jared Boone
8fba47b7d8
FIFO in and out indices should be volatile.
...
Later code revealed that the receiving core never notices (reads anew) the _in member variable when waiting for the FIFO to be empty (_in == _out).
2016-01-07 10:53:27 -08:00
Jared Boone
7710b2d1fa
ChannelSpectrumConfig message subsumes FIFONotify.
...
Separate channel spectrum config from spectrum data. This will permit sending config info only when necessary.
Use type information of ChannelSpectrum to statically define number of FFT bins elsewhere.
TODO: Posting configuration message way too often. Fixing that is the next step.
2016-01-06 12:10:30 -08:00
Jared Boone
ba33cc737d
Transmit DisplayFrameSync message, handle in WaterfallSpectrum.
...
More kludginess, especially around initialization and timing. But it addresses the flickering lines of pixels at the bottom of the waterfall scroll area!
2016-01-06 11:36:57 -08:00
Jared Boone
aaa1bc3a09
Transmit ChannelSpectrum data through separate FIFO.
...
Allows handling of data during LCD "vertical retrace", independent of other baseband->application messages. A bit kludgy still...
2016-01-06 11:34:41 -08:00
Jared Boone
2cd28fcc0c
Make FIFO::in() more consistent with other functions.
2016-01-06 11:04:25 -08:00
Jared Boone
4059e9cebe
Reintroduce FIFO in/out for templated FIFO element type.
2016-01-06 11:01:02 -08:00
Jared Boone
b05923eab6
Change FIFO is_full() to make more sense.
2016-01-06 10:58:42 -08:00
Jared Boone
dcb2c46c57
Add wideband FM spectrum waterfall.
2016-01-04 17:27:18 -08:00
Jared Boone
36021689f9
Remove commented, dead code.
2016-01-04 15:42:19 -08:00
Jared Boone
73671ca5f6
Update sample rate and buffer size comments in execute() methods.
2016-01-04 15:41:49 -08:00
Jared Boone
c1e5577669
Eliminate duplicate code between event_m4.hpp, event.hpp.
...
event.* is common code, _m0 and _m4 contain specific event mask definitions.
2016-01-04 12:54:05 -08:00
Jared Boone
229c1e9a3c
Move M4 MAPP IRQ handler to be with the event handler class.
...
event.[ch]pp and event_m4.[ch]pp are looking almost the same now...
2016-01-04 12:44:28 -08:00
Jared Boone
0fe5409357
Move M4TXEVENT interrupt control into event handler run().
2016-01-04 12:15:35 -08:00
Jared Boone
69b258cc2b
Consolidate event handler code, including IRQ.
2016-01-04 12:15:10 -08:00
Jared Boone
b058c0fe00
Consolidate M0-specific code.
2016-01-04 12:07:30 -08:00
Jared Boone
a27489eb21
Consolidating M4-specific saturation flag code.
2016-01-04 12:00:52 -08:00
Jared Boone
b42d3cc9d5
Move BasebandStatsCollector code into .cpp, as much as possible.
...
Still have template for callback, but hopefully will mitigate bloat when BasebandStatsCollector is used in multiple places.
2016-01-04 11:49:39 -08:00
Jared Boone
6d3cdb9bbf
Separate template/callback code from method code.
...
...for more small reductions in code size.
2016-01-04 11:45:33 -08:00
Jared Boone
cd3a5afdb1
More templating elimination (MatchedFilter), some #include clean-up.
...
592 bytes!
2016-01-04 11:32:47 -08:00
Jared Boone
e6f69c90f2
Reduce inlining of FIR configuration due to templating.
...
80 bytes!
2016-01-04 11:20:28 -08:00
Jared Boone
359fb6f3c6
...and more pass-by-reference.
...
Another 176 bytes!
2016-01-04 11:04:28 -08:00
Jared Boone
05a1c22426
More tweaks to pass buffers by reference.
...
144 bytes less code!
2016-01-04 11:00:17 -08:00
Jared Boone
778e2d2381
A little code consolidation -- M0APP IRQ.
2016-01-04 10:12:18 -08:00
Jared Boone
cd17f414b7
ChannelDecimator now unused, remove from Makefile, remove commented code.
2016-01-04 09:49:48 -08:00
Jared Boone
168bd02dea
Move AudioStatsCollector code into .cpp.
2016-01-04 09:25:43 -08:00
Jared Boone
c5b234d9f6
Remove BasebandProcessor virtual method replaced by message.
2016-01-04 09:13:17 -08:00
Jared Boone
222b878629
Use BasebandProcessor::mute_audio(), remove I2S #include dependencies.
2016-01-04 09:07:07 -08:00
Jared Boone
ef6ae8ed94
Add mute_audio() function to baseband processor.
2016-01-04 09:06:17 -08:00
Jared Boone
8fb3ffaedc
Reorder squelch code to group things a bit more logically.
2016-01-04 09:01:51 -08:00
Jared Boone
b0855b3c4d
Pass buffers by reference to save significant text section code size.
...
752 bytes!
2016-01-03 23:09:06 -08:00
Jared Boone
b03da8d693
Fix calculation of work_audio_buffer item count.
2016-01-03 22:42:40 -08:00
Jared Boone
d9017530c6
Moved baseband temporary buffers back into class member variables.
...
Significant performance hit when declaring on stack. C++ wants to initialize std::array or even raw array with element constructors, was resulting in ~7% CPU utilization, for a buffer that was immediately written over anyway.
2016-01-03 22:31:44 -08:00
Jared Boone
5547782f5a
Improve FFT twiddle factor precisions using Python SymPy.
...
Python math, numpy, scipy produce values with significant rounding errors.
2016-01-03 21:02:44 -08:00
Jared Boone
963b6e257a
FFT twiddles can be used for all K <= table length.
...
Change assert to allow FFTs < 8.
2016-01-03 20:25:31 -08:00
Jared Boone
54e59cc224
Hard-code K=8 FFT twiddle constants for now.
...
So low on baseband RAM! This eliminates the sin_f32() function and table, which is only used in the FFT, for the moment.
2016-01-03 20:08:26 -08:00
Jared Boone
65dd385c94
Little FFT loop indexing tweak.
2016-01-03 17:47:08 -08:00
Jared Boone
78992c2f8d
Adjust default FM squelch threshold.
2016-01-03 17:05:00 -08:00
Jared Boone
8adaddac5f
Make FM squelch runtime-configurable.
2016-01-03 17:03:16 -08:00
Jared Boone
86cf967464
Simplify FM demodulator class. Remove duplicate code.
2016-01-03 16:58:36 -08:00
Jared Boone
10bce4b845
Clean up #includes.
2016-01-03 16:58:08 -08:00
Jared Boone
28be223ace
Fix for merge-breakage. Argh.
2016-01-03 16:37:47 -08:00
Jared Boone
3f299c74c6
More old GCC fussiness fixes.
2016-01-03 16:32:45 -08:00
Jared Boone
62ee26e763
OK... Nuke list initializations.
2016-01-03 16:28:09 -08:00
Jared Boone
422f6c6960
Don't pass by reference in message constructors.
2016-01-03 16:21:17 -08:00
Jared Boone
b5aa2b205f
Implement AMConfigureMessage from M0 to M4.
2016-01-03 14:31:39 -08:00
Jared Boone
f2f7032615
Wideband FM configuration messages from M0.
2016-01-03 13:38:55 -08:00
Jared Boone
317ec53638
Handle NBFM configuration message on M4 processor side.
2016-01-03 12:49:00 -08:00
Jared Boone
7496c2aced
Send NBFM configuration message from M0 to M4.
2016-01-03 12:47:22 -08:00
Jared Boone
0497dbf62f
NBFM configuration message.
...
Allows changing NBFM filter configurations from M0.
2016-01-03 12:46:21 -08:00
Jared Boone
a5012427d8
Remove little bit of dead code.
2016-01-03 12:45:34 -08:00
Jared Boone
c179b9e1cd
Move FIR filter configs to common/, so M0 can use it.
...
Planning to pass from M0 to M4 so M4 doesn't need to keep all these different filter configs in text section.
2016-01-03 12:45:15 -08:00
Jared Boone
39ca6fec62
Transform update spectrum event into message.
2016-01-03 12:05:47 -08:00
Jared Boone
c9f9d97d07
Move BasebandConfiguration message handling into baseband thread.
2016-01-03 11:49:01 -08:00
Jared Boone
fd612dc207
Baseband: Pass unhandled messages to baseband thread, processor.
2016-01-02 22:59:31 -08:00
Jared Boone
07cd99d85d
Removing baseband MessageHandlerMap.
...
It's a bit heavy (362 bytes smaller with switch/case implementation), hard to access to add/remove handlers, doesn't bubble events like I'd like. (I'm going to bubble events to the baseband processor shortly.)
2016-01-02 22:54:09 -08:00
Jared Boone
fea5dd536f
Move baseband working buffers from member variables to stack.
...
It's temporary, after all...
2016-01-02 12:08:21 -08:00
Jared Boone
e7be7c5121
Comments about IFIR filter taps design parameters.
2016-01-02 10:49:37 -08:00
Jared Boone
410d4d7fc3
Use IFIR decimator for TPMS.
2016-01-02 10:42:40 -08:00
Jared Boone
e720bfb054
Use IFIR decimation for broadcast FM receiver.
2016-01-02 10:35:23 -08:00
Jared Boone
a02bfe55d0
Decimators for wider IFIR output bandwidth.
2016-01-02 10:34:17 -08:00
Jared Boone
096ebe47d8
Turn almost-zeros in TPMS matched filter to actual zeros.
2016-01-02 10:24:49 -08:00
Jared Boone
0e04939439
Broadcast FM de-emphasis using 75us time constant.
2016-01-01 20:56:30 -08:00
Jared Boone
2e90edbf39
Add 30Hz high-pass IIR filter for wideband FM.
2016-01-01 20:55:00 -08:00
Jared Boone
9a0fb2cab7
Rename IIR filter for 300Hz high-pass.
2016-01-01 20:53:11 -08:00
Jared Boone
ff05833b02
Use new decimation filters in AIS processor.
2016-01-01 13:20:02 -08:00
Jared Boone
316d5d433b
Move IIR code into .cpp file.
...
A few hundred more text section bytes saved.
2015-12-31 10:52:28 -08:00
Jared Boone
9fb22dfd1f
Reduce type size for int16_t squared values.
2015-12-31 10:09:42 -08:00
Jared Boone
ef37bbd851
Small FM squelch simplification.
2015-12-31 10:08:41 -08:00
Jared Boone
0962343190
Use decimation variable, not hard-coded value.
...
Break in form from NBFM code.
2015-12-30 12:20:25 -08:00
Jared Boone
7de80edcd3
Move baseband FIR filter defs to common file.
...
They will likely be shared with multiple decimators/demodulators.
Also added normalized filter pass/stop values to each set of taps.
2015-12-30 12:19:42 -08:00
Jared Boone
3db0820b54
Remove LOCATE_IN_RAM from DMA IRQ handler
...
Not needed for M4, was causing code to be located in data RAM, and veneers to jump between code and data RAM. Reclaimed a few hundred bytes of code RAM.
2015-12-29 11:24:23 -08:00
Jared Boone
bbfcca8ec0
Rebake of AM, NFM demodulators -- more flexible filtering/configuration.
...
Also make SpectrumCollector dynamically configurable.
Add deemphasis filter to NFM.
2015-12-29 11:02:07 -08:00
Jared Boone
df593c2f0f
Run codec at 1 x baseband sample rate. Do not use CPLD decimator.
...
Codec performance appears to be unaffected by <8MHz sample rate. Saves a bit of power, eliminates dependency on CPLD decimation feature.
2015-12-29 10:55:55 -08:00
Jared Boone
549e5b9ddc
Unrolled FIR filters for more flexible baseband filtering (using IFIR technique).
2015-12-29 10:48:29 -08:00
Jared Boone
87c9772128
More M4 instruction wrappers, with vector typed arguments.
2015-12-28 16:52:10 -08:00
Jared Boone
f74e6690cb
Utilize class types for member variables -- slightly more generic.
2015-12-28 16:51:34 -08:00
Jared Boone
9505d367c3
Add SMMULR "intrinsic".
2015-12-28 16:50:01 -08:00
Jared Boone
90cd2a6794
Improve argument and retval types for my M4 SIMD intrinsics.
2015-12-28 16:49:31 -08:00
Jared Boone
8453741252
Saturate IIR filter output to int16_t.
2015-12-28 16:33:26 -08:00
Jared Boone
7ec1a1f85b
Move comment about FM squelch IIR filter.
2015-12-28 16:24:43 -08:00
Jared Boone
ef7aeaafa9
Tweak (and document!) audio HPF IIR.
2015-12-28 16:01:26 -08:00
Jared Boone
4ee0385530
Add FM class default constructor.
...
For classes that configure FM demodulation at runtime.
2015-12-28 15:51:20 -08:00
Jared Boone
4910bacfa2
Un-comment angle_precise(). Not used, but no reason to comment out.
2015-12-28 15:50:19 -08:00
Jared Boone
49215c3ae6
Remove garbage DSP filter code.
2015-12-28 15:49:47 -08:00
Jared Boone
ccc3402869
Add complex32_t type.
2015-12-28 10:14:35 -08:00
Jared Boone
dc86db5b87
Reminder to my future self to not over-optimize complex conjugate multiply.
2015-12-28 10:12:40 -08:00
Jared Boone
b8726b6ecf
Un-bitfield PinConfig, GCC 5 didn't like it.
...
And GCC 4.9 was very touchy about it. Attempts to fix by other means broke MAX2837 register readback (but not writing?). It suggests there might be a deeper issue -- setup/hold timing?
2015-12-24 10:36:26 -08:00
Jared Boone
5ace32a1ee
Fix inaccurate comment.
2015-12-20 13:33:08 -08:00
Jared Boone
bddd26d557
Perform frequency-domain windowing of spectrum.
...
Reduces sidelobes a bit, improves apparent resolution. Avoids windowing (more RAM and CPU) in baseband.
2015-12-20 13:31:00 -08:00
Jared Boone
b38338efc0
Keep MAX2837 in standby so temperature can be read.
...
I think this won't significantly impact power consumption.
2015-12-17 20:59:21 -08:00
Jared Boone
1146d1fa06
Clean up temperature sensor rendering.
2015-12-17 20:36:58 -08:00
Jared Boone
188f692195
Center temperature graph in view.
2015-12-17 12:18:25 -08:00
Jared Boone
c3116eac63
Use reference to temperature logger, more concise.
2015-12-17 12:16:26 -08:00
Jared Boone
c92138f4b3
Extract calculation of temperature from raw sensor value.
2015-12-17 12:14:28 -08:00
Jared Boone
146a06b0d1
Method to read TemperatureLogger record capacity.
2015-12-17 12:12:22 -08:00
Jared Boone
17d405ccec
Weird syntax burp on my part.
2015-12-17 10:30:40 -08:00
Jared Boone
b65cd72a68
Remove some pointless GCC-isms.
2015-12-17 10:12:03 -08:00
Jared Boone
3151100e50
Correct aesthetic typo in MAX2837 register defaults.
2015-12-16 22:37:55 -08:00
