Commit Graph

2196 Commits

Author SHA1 Message Date
euquiq
13ce56f7bf Added "RESOLUTION" parameter
Discord User jteich did some investigation (Thanks!) and helped me understanding this rather obscure parameter:

Internally, is called "TRIGGER", and is passed into the baseband when configuring the desired spectrum sample rate.

Please forgive me in advance if this explanation is not 100% correct. It's only my interpretation, based on my own observation and jteich's comments over Discord chat.

This trigger parameter apparently determines the amount of data over time used for calculating the signal's power inside each specttrum's bin, before considering it "done".

In short, if you lower this resolution value then the cascade will tend to be rendered a bit faster, while kind of blind to tiny signals.

On the other hand, a bigger value will help rendering and distinguishing different signals on the cascade.

Too big a value can easily clutter up the cascade. But then it may be a "blessing" when inspecting higher freuqencies -where hackrf is more deaf"

The default value of 32 is quite decent. But then, now you can experiment with it. Cheers
2020-10-26 23:43:35 -03:00
euquiq
210ec9dd1b Looking Glass with PRESETS
Added a PRESETS.TXT file (inside /LOOKINGGLASS folder).

Also optimized the way the spectrum signal is integrated into the cascade.

Added provision for ranges lower than 240MHz but I am afraid that at this time it will not be advisable to lower ranges any more than 240MHz, since some artifacts and frequency running - moving out of place- occurs.

I can only hope that someone with a better understanding of hackrf's inner code can fix this issue and perhaps enhance the scanning speed.

I found some "original commenting" inside the code:

	// TODO: Move more low-level radio control stuff to M4. It'll enable tighter
	// synchronization for things like wideband (sweeping) spectrum analysis, and
	// protocols that need quick RX/TX turn-around.

Which makes me think that there are things "missing"  from the portapack side of the code, for allowing serious speed sweeping. So I am concluding that with current "portapack framework" this might be "the best possible thing".

It is to be noted that the "new" internal sweep mode code is signed by:

 * Copyright 2016 Mike Walters, Dominic Spill
 *
 * This file is part of HackRF.

Maybe Mike or Dominic can be contacted and hopefully lend a hand on enhancing this code.
2020-10-26 12:53:10 -03:00
euquiq
3e1d726064 Enhancement and bug
Added a nicer MARKER (thanks to XSX(H1) contributor for the suggestion)

Fixed a bug that made the screen scroll from top, when using a popup "window" and returning (like, when pressing the DC VOLTAGE enable / disable" button on top bar) THanks to GregoryFenton for the testing and bug spotting!
2020-10-23 12:19:57 -03:00
euquiq
01ba7a57ea New "looking Glass" app
Capable of showing a cascade with full bandwidth scan. You can select Min and Max Mhz for the cascade.

You can move a marker so to (aproximately) know  a particular frequency on the cascade. If you press the select button, the app will jump into the RX -> AUDIO app, already tuned into the just "marked" frequency.

This first version SURELY has space for lots of optimizations and improvement in general.
2020-10-21 13:21:34 -03:00
Erwin Ried
af3130faa8
Merge pull request #205 from texasyojimbo/next
TIMEFREQ.TXT
2020-10-03 01:15:30 +02:00
AD5NL
3419ece682
Create TIMEFREQ.TXT
HF Time and frequency standard stations
2020-10-02 16:47:04 -05:00
Erwin Ried
98ba332cda Version bump 2020-09-25 03:34:51 +02:00
Erwin Ried
f3503e6844 Fix for the freezing when no on_touch_release function 2020-09-25 03:34:05 +02:00
Erwin Ried
883a62238d Version bump 2020-09-24 22:04:59 +02:00
Erwin Ried
9021e43041
Create FUNDING.yml 2020-09-24 11:06:30 +02:00
Erwin Ried
e75dfdaf2d
Merge pull request #196 from strijar/morse_tx
Bug fix
2020-09-24 10:33:06 +02:00
Белоусов Олег
cafc4fdec4 Bug fix 2020-09-24 11:04:00 +03:00
Erwin Ried
99af859e13 Default null for on touch release and press
Fixes https://github.com/eried/portapack-mayhem/issues/194
2020-09-24 03:15:40 +02:00
Erwin Ried
4f2b306784
Merge pull request #195 from strijar/morse_tx
Morse TX - speed in WPS and repeat loop
2020-09-22 21:54:51 +02:00
Белоусов Олег
25ba2f1391 Morse TX loops 2020-09-22 16:12:46 +03:00
Белоусов Олег
a5a3ba184a Morse TX speed in WPS 2020-09-22 11:46:44 +03:00
Erwin Ried
17cb092978
Merge pull request #191 from dqs105/siggen_fix
SigGen "Stop after" freeze fix & stronger CW signal
2020-09-20 15:08:26 +02:00
Erwin Ried
1ff027ed01
Merge pull request #192 from RobertoD91/next
Add VHF marine frequence on SD
2020-09-20 15:06:22 +02:00
dqs105
e89b7683ef
Fixed "Stop After" freeze & stronger CW signal 2020-09-19 14:24:40 +08:00
dqs105
1029322405
Fix "Stop After" Freeze. 2020-09-19 14:22:28 +08:00
Roberto
d280054093
Add VHF marine frequence on SD 2020-09-19 00:10:53 +02:00
Erwin Ried
55783a60f5 Update ui_navigation.cpp 2020-09-15 23:13:31 +02:00
Erwin Ried
e76ec66023 Adding contributors 2020-09-15 23:13:01 +02:00
Erwin Ried
bf068abba3 Microphone app button rename 2020-09-15 23:12:50 +02:00
Erwin Ried
8949662eee Version bump 2020-09-15 22:10:17 +02:00
Erwin Ried
3d9ce8a037 Merge branch 'pr/166' into Radiosonde-vaisala-add-temp-humidity-merge-conflicts-fix 2020-09-14 23:11:08 +02:00
Erwin Ried
7fd9adf3f2
Merge pull request #171 from euquiq/mic-tx-rx-into-main-menu
Menu changes
2020-09-14 22:51:49 +02:00
Erwin Ried
3aaa4a0ba1
Merge pull request #161 from dqs105/mic_tx_rfgain
Added TX Gain control & code simplification
2020-09-14 22:50:35 +02:00
Erwin Ried
875db13917
Merge pull request #170 from dqs105/siggen_amp
Remove hard-coded rf_amp on.
2020-09-14 22:46:53 +02:00
Erwin Ried
1a94f4a1ab
Merge pull request #174 from ITAxReal/ax_fork
SoundBoard App Improvements
2020-09-14 22:46:00 +02:00
Erwin Ried
4390647e28
Merge pull request #184 from rascafr/rascafr/freq-manager-hide-tmp-dot-files
Hide temporary & OS system files from category files list
2020-09-11 22:18:20 +02:00
Rascafr
fcdbedca98 Bad emplace_back code position fix 2020-09-11 20:46:41 +02:00
Rascafr
ccb3937e37 Hide .dot tmp / system files from list in frequency manager module 2020-09-11 20:34:15 +02:00
Erwin Ried
c4052064a9
Merge pull request #182 from rascafr/file-manager-hide-tmp-dot-files
Hide temporary & OS system in Frequency Manager
2020-09-11 15:02:16 +02:00
Rascafr
dd5e63abd3 Hide empty & .dot tmp / system files in freq manager 2020-09-11 12:25:10 +02:00
ITAxReal
8a4e6492d9 More Improvements on SoundBoard
Optimizing and fixing
2020-08-28 23:59:33 +03:00
ITAxReal
668afccc28 > But it's a sound board not a music player....  Maybe make it say sounds instead of songs? Paging was a great idea however.
Okay, okay.
2020-08-28 22:22:39 +03:00
ITAxReal
e466c14c88 Improved SoundBoard app:
* No device freeze when you try to close app while it's transmitting
* Bypassed 100 .wav files limit by implementing paging functionality
* Removed useless progressbar and implemented page info line instead
2020-08-28 21:47:56 +03:00
euquiq
a2b28c097c Menu changes
Moved the MIC TX RX into the main menu.

Changed scanner color from yellow to green, since it is kind of rounded up into an acceptable functionality.

Also, did a bit of cleanup on the code spacing inside the menues.
2020-08-26 10:48:09 -03:00
dqs105
7fae33eb49
Remove hard-coded rf_amp on.
Removed hard-coded turning rf_amp on when enabling transmitting.
It will be handled by TransmitterView.
2020-08-26 15:39:17 +08:00
Erwin Ried
3425ca8d54
Update generate_world_map.bin.py 2020-08-26 01:40:51 +02:00
Erwin Ried
dbf8d2e130
Merge pull request #167 from euquiq/fix-backlight-timer-bug
fix-portapack-backlight-timer-bug
2020-08-25 10:11:31 +02:00
euquiq
a445bfa444 fix-portapack-backlight-timer-bug
The selected time for backlight off on Options-> Interface was not working ok for most of the selectable time options.
2020-08-24 18:12:46 -03:00
euquiq
13abb620f6 Radiosonde-vaisala-add-temp-humidity
Also added the fields "DateTime" which just shows the raw timestamp that portapack assigned the last packet received, in the format: YYYYMMDDHHMMSS ... And "Frame" which shows the packet # (or frame) for correlating with other software / verify that there are new packets being received.

Also moved a string function for returning rounded-up decimals, originally inside the whipcalc tool app, into the string_format functions library, because I used that function on TEMP and HUMIDITY values inisde the radiosonde app.

Finally, the whole UI has its widgets moved a bit, giving space for these new parameters.
2020-08-24 17:31:27 -03:00
dqs105
8833b2fce5
Restored radio.cpp 2020-08-24 11:21:30 +08:00
dqs105
94eea961b5
Merge Button and TxButton & Minor bug fix
- TxButton and Button now merged into one widget(with compatibility).
- Fixed Tx stuck when pressing the button with key at the first time.
- Other small bug fix.
2020-08-24 11:18:57 +08:00
dqs105
7d6fb56c7e Minor bug fix
- Key press & touch isolation
2020-08-24 11:09:10 +08:00
dqs105
911eb36210 Merged TxButton and Button & minor bug fix 2020-08-24 11:02:42 +08:00
dqs105
af0d9d8b68
Merge dqs105/mic_tx_rx_dev
Various enhancements

- Separate TX and RX frequency control
- Fixed the TX led bug(What does those code do?)
- UI tweaks
- New PTT button instead of "Right Button" (allowing right button to be always available)
2020-08-24 02:17:36 +08:00
dqs105
a09db01821
Merge dqs105/mic_tx_rx_dev_ui
UI tweak & new PTT button
2020-08-24 01:59:22 +08:00