Scheme by luigi1111:
Multisig for RingCT on Monero
2 of 2
User A (coordinator):
Spendkey b,B
Viewkey a,A (shared)
User B:
Spendkey c,C
Viewkey a,A (shared)
Public Address: C+B, A
Both have their own watch only wallet via C+B, a
A will coordinate spending process (though B could easily as well, coordinator is more needed for more participants)
A and B watch for incoming outputs
B creates "half" key images for discovered output D:
I2_D = (Hs(aR)+c) * Hp(D)
B also creates 1.5 random keypairs (one scalar and 2 pubkeys; one on base G and one on base Hp(D)) for each output, storing the scalar(k) (linked to D),
and sending the pubkeys with I2_D.
A also creates "half" key images:
I1_D = (Hs(aR)+b) * Hp(D)
Then I_D = I1_D + I2_D
Having I_D allows A to check spent status of course, but more importantly allows A to actually build a transaction prefix (and thus transaction).
A builds the transaction until most of the way through MLSAG_Gen, adding the 2 pubkeys (per input) provided with I2_D
to his own generated ones where they are needed (secret row L, R).
At this point, A has a mostly completed transaction (but with an invalid/incomplete signature). A sends over the tx and includes r,
which allows B (with the recipient's address) to verify the destination and amount (by reconstructing the stealth address and decoding ecdhInfo).
B then finishes the signature by computing ss[secret_index][0] = ss[secret_index][0] + k - cc[secret_index]*c (secret indices need to be passed as well).
B can then broadcast the tx, or send it back to A for broadcasting. Once B has completed the signing (and verified the tx to be valid), he can add the full I_D
to his cache, allowing him to verify spent status as well.
NOTE:
A and B *must* present key A and B to each other with a valid signature proving they know a and b respectively.
Otherwise, trickery like the following becomes possible:
A creates viewkey a,A, spendkey b,B, and sends a,A,B to B.
B creates a fake key C = zG - B. B sends C back to A.
The combined spendkey C+B then equals zG, allowing B to spend funds at any time!
The signature fixes this, because B does not know a c corresponding to C (and thus can't produce a signature).
2 of 3
User A (coordinator)
Shared viewkey a,A
"spendkey" j,J
User B
"spendkey" k,K
User C
"spendkey" m,M
A collects K and M from B and C
B collects J and M from A and C
C collects J and K from A and B
A computes N = nG, n = Hs(jK)
A computes O = oG, o = Hs(jM)
B anc C compute P = pG, p = Hs(kM) || Hs(mK)
B and C can also compute N and O respectively if they wish to be able to coordinate
Address: N+O+P, A
The rest follows as above. The coordinator possesses 2 of 3 needed keys; he can get the other
needed part of the signature/key images from either of the other two.
Alternatively, if secure communication exists between parties:
A gives j to B
B gives k to C
C gives m to A
Address: J+K+M, A
3 of 3
Identical to 2 of 2, except the coordinator must collect the key images from both of the others.
The transaction must also be passed an additional hop: A -> B -> C (or A -> C -> B), who can then broadcast it
or send it back to A.
N-1 of N
Generally the same as 2 of 3, except participants need to be arranged in a ring to pass their keys around
(using either the secure or insecure method).
For example (ignoring viewkey so letters line up):
[4 of 5]
User: spendkey
A: a
B: b
C: c
D: d
E: e
a -> B, b -> C, c -> D, d -> E, e -> A
Order of signing does not matter, it just must reach n-1 users. A "remaining keys" list must be passed around with
the transaction so the signers know if they should use 1 or both keys.
Collecting key image parts becomes a little messy, but basically every wallet sends over both of their parts with a tag for each.
Thia way the coordinating wallet can keep track of which images have been added and which wallet they come from. Reasoning:
1. The key images must be added only once (coordinator will get key images for key a from both A and B, he must add only one to get the proper key actual key image)
2. The coordinator must keep track of which helper pubkeys came from which wallet (discussed in 2 of 2 section). The coordinator
must choose only one set to use, then include his choice in the "remaining keys" list so the other wallets know which of their keys to use.
You can generalize it further to N-2 of N or even M of N, but I'm not sure there's legitimate demand to justify the complexity. It might
also be straightforward enough to support with minimal changes from N-1 format.
You basically just give each user additional keys for each additional "-1" you desire. N-2 would be 3 keys per user, N-3 4 keys, etc.
The process is somewhat cumbersome:
To create a N/N multisig wallet:
- each participant creates a normal wallet
- each participant runs "prepare_multisig", and sends the resulting string to every other participant
- each participant runs "make_multisig N A B C D...", with N being the threshold and A B C D... being the strings received from other participants (the threshold must currently equal N)
As txes are received, participants' wallets will need to synchronize so that those new outputs may be spent:
- each participant runs "export_multisig FILENAME", and sends the FILENAME file to every other participant
- each participant runs "import_multisig A B C D...", with A B C D... being the filenames received from other participants
Then, a transaction may be initiated:
- one of the participants runs "transfer ADDRESS AMOUNT"
- this partly signed transaction will be written to the "multisig_monero_tx" file
- the initiator sends this file to another participant
- that other participant runs "sign_multisig multisig_monero_tx"
- the resulting transaction is written to the "multisig_monero_tx" file again
- if the threshold was not reached, the file must be sent to another participant, until enough have signed
- the last participant to sign runs "submit_multisig multisig_monero_tx" to relay the transaction to the Monero network
43f5269f Wallets now do not depend on the daemon rpc lib (moneromooo-monero)
bb89ae8b move connection_basic and network_throttle from src/p2p to epee (moneromooo-monero)
4abf25f3 cryptonote_core does not depend on p2p anymore (moneromooo-monero)
Partially implements #74.
Securely erases keys from memory after they are no longer needed. Might have a
performance impact, which I haven't measured (perf measurements aren't
generally reliable on laptops).
Thanks to @stoffu for the suggestion to specialize the pod_to_hex/hex_to_pod
functions. Using overloads + SFINAE instead generalizes it so other types can
be marked as scrubbed without adding more boilerplate.
3dffe71b new wipeable_string class to replace std::string passphrases (moneromooo-monero)
7a2a5741 utils: initialize easylogging++ in on_startup (moneromooo-monero)
54950829 use memwipe in a few relevant places (moneromooo-monero)
000666ff add a memwipe function (moneromooo-monero)
0d9c0db9 Do not build against epee_readline if it was not built (Howard Chu)
178014c9 split off readline code into epee_readline (moneromooo-monero)
a9e14a19 link against readline only for monerod and wallet-wallet-{rpc,cli} (moneromooo-monero)
437421ce wallet: move some scoped_message_writer calls from the libs (moneromooo-monero)
e89994e9 wallet: rejig to avoid prompting in wallet2 (moneromooo-monero)
ec5135e5 move input_line from command_line to simplewallet (moneromooo-monero)
082db75f move cryptonote command line options to cryptonote_core (moneromooo-monero)
This patch allows to filter out sensitive information for queries that rely on the pool state, when running in restricted mode.
This filtering is only applied to data sent back to RPC queries. Results of inline commands typed locally in the daemon are not affected.
In practice, when running with `--restricted-rpc`:
* get_transaction_pool will list relayed transactions with the fields "last relayed time" and "received time" set to zero.
* get_transaction_pool will not list transaction that have do_not_relay set to true, and will not list key images that are used only for such transactions
* get_transaction_pool_hashes.bin will not list such transaction
* get_transaction_pool_stats will not count such transactions in any of the aggregated values that are computed
The implementation does not make filtering the default, so developers should be mindful of this if they add new RPC functionality.
Fixes#2590.
ff7745bb Edited test readme for accuracy and depth (Cole Lightfighter)
c300ae56 Added test documentation & Keccak unit test (Cole Lightfighter)
f6119a8e Added test documentation & Keccak unit test (Cole Lightfighter)
Tests for checking proper error throwing for out-of-bounds subaddress
indexes, and proper addition of subaddresses.
Signed-off-by: Cole Lightfighter <cole@onicsla.bz>
The commands handler must not be destroyed before the config
object, or we'll be accessing freed memory.
An earlier attempt at using boost::shared_ptr to control object
lifetime turned out to be very invasive, though would be a
better solution in theory.
- internal nullptr checks
- prevent modifications to network_address (shallow copy issues)
- automagically works with any type containing interface functions
- removed fnv1a hashing
- ipv4_network_address now flattened with no base class
6137a0b9 blockchain: reject unsorted ins and outs from v7 (moneromooo-monero)
16afab90 core: sort ins and outs key key image and public key, respectively (moneromooo-monero)
0c36b9f9 common: add apply_permutation file and function (moneromooo-monero)
It was always returning true, and could not be foreseen to
usefully return errors in the future. This silences CID 162652
as well as saves some checking code in a few places.
And optimize import startup:
Remember start_height position during initial count_blocks pass
to avoid having to reread entire file again to arrive at start_height
If monerod is started with default sync mode, set it to SAFE after
synchronization completes. Set it back to FAST if synchronization
restarts (e.g. because another peer has a longer blockchain).
If monerod is started with an explicit sync mode, none of this
automation takes effect.
Add get_fork_version and add_ideal_fork_version to core so
cryptonote_protocol does not have to need the Blockchain
class directly, as it's not in its dependencies, and add
those to the fake core classes in tests too.
A block queue is now placed between block download and
block processing. Blocks are now requested only from one
peer (unless starved).
Includes a new sync_info coommand.
Existing tests: block, transaction, signature, cold outputs,
cold transaction.
Data for these is in tests/data/fuzz.
A convenience shell script is in contrib/fuzz_testing/fuzz.sh, eg:
contrib/fuzz_testing/fuzz.sh signature
The fuzzer will run indefinitely, ^C to stop.
Fuzzing is currently supported for GCC only. I can't get CLANG
to build Monero here as it dies on some system headers, so if
someone wants to make it work on both, that'd be great.
In particular, the __AFL_LOOP construct should be made to work
so that a given run can fuzz multiple inputs, as the C++ load
time is substantial.
- Performance improvements
- Added `span` for zero-copy pointer+length arguments
- Added `std::ostream` overload for direct writing to output buffers
- Removal of unused `string_tools::buff_to_hex`
Minimum mixin 4 and enforced ringct is moved from v5 to v6.
v5 is now used for an increased minimum block size (from 60000
to 300000) to cater for larger typical/minimum transaction size.
The fee algorithm is also changed to decrease the base per kB
fee, and add a cheap tier for those transactions which we do
not care if they get delayed (or even included in a block).
a427235e core: add a missing newline on a string to be logged (moneromooo-monero)
b6a2230e unit_tests: fix minor blockchain_db regression (moneromooo-monero)
c488eca5 hardfork: tone down some logs (moneromooo-monero)
5adcb5a4 tx_pool: add a debug message when adding a tx to the pool (moneromooo-monero)
9faef1f8 cryptonote_protocol: misc fluffy block fixes (moneromooo-monero)
7403e56f performance_tests: report small time per call in microseconds (moneromooo-monero)
cadada2d performance_tests: add tests for sc_reduce32 and cn_fast_hash (moneromooo-monero)
962c72b6 performance_tests: initialize logging at startup (moneromooo-monero)
- fix wrong block being used when a new block is received between
a node elaying a fluffy block and sending a new fluffy block
with txes a peer did not have
- misc a neverending ping pong requesting the same missing txids
when a new block is received in the meantime, causing the top
block to not be the one we need
- send the original fluffy block message block height when sending
a new fluffy block, not the current top height, which might
have been updated since
- avoid sending back the whole block blob when asking for txes,
send only the hash instead
- plus misc cleanup and additional debugging logs
In simple terms, add_subdirectory() is replaced with ExternalProject_Add().
This change is inspired by https://crascit.com/2015/07/25/cmake-gtest/
with one difference, no download, using the source we already have.
Before this change, make debug-test must be preceded by make clean.
Otherwise, a subsequent build would be polluted by cmake options made
by tests/gtest/.
Also removed the changed compiler flags. My test build did not have
the affected warnings.
3ae79a59 core: set missing verifivation_failed flag when rejecting a tx (moneromooo-monero)
ea6549e9 core_tests: decrease trace level from trace to debug (moneromooo-monero)
- http_simple_client now uses std::chrono for timeouts
- http_simple_client accepts timeouts per connect / invoke call
- shortened names of epee http invoke functions
- invoke command functions only take relative path, connection
is not automatically performed
This replaces the epee and data_loggers logging systems with
a single one, and also adds filename:line and explicit severity
levels. Categories may be defined, and logging severity set
by category (or set of categories). epee style 0-4 log level
maps to a sensible severity configuration. Log files now also
rotate when reaching 100 MB.
To select which logs to output, use the MONERO_LOGS environment
variable, with a comma separated list of categories (globs are
supported), with their requested severity level after a colon.
If a log matches more than one such setting, the last one in
the configuration string applies. A few examples:
This one is (mostly) silent, only outputting fatal errors:
MONERO_LOGS=*:FATAL
This one is very verbose:
MONERO_LOGS=*:TRACE
This one is totally silent (logwise):
MONERO_LOGS=""
This one outputs all errors and warnings, except for the
"verify" category, which prints just fatal errors (the verify
category is used for logs about incoming transactions and
blocks, and it is expected that some/many will fail to verify,
hence we don't want the spam):
MONERO_LOGS=*:WARNING,verify:FATAL
Log levels are, in decreasing order of priority:
FATAL, ERROR, WARNING, INFO, DEBUG, TRACE
Subcategories may be added using prefixes and globs. This
example will output net.p2p logs at the TRACE level, but all
other net* logs only at INFO:
MONERO_LOGS=*:ERROR,net*:INFO,net.p2p:TRACE
Logs which are intended for the user (which Monero was using
a lot through epee, but really isn't a nice way to go things)
should use the "global" category. There are a few helper macros
for using this category, eg: MGINFO("this shows up by default")
or MGINFO_RED("this is red"), to try to keep a similar look
and feel for now.
Existing epee log macros still exist, and map to the new log
levels, but since they're used as a "user facing" UI element
as much as a logging system, they often don't map well to log
severities (ie, a log level 0 log may be an error, or may be
something we want the user to see, such as an important info).
In those cases, I tried to use the new macros. In other cases,
I left the existing macros in. When modifying logs, it is
probably best to switch to the new macros with explicit levels.
The --log-level options and set_log commands now also accept
category settings, in addition to the epee style log levels.
3ff54bdd Check for correct thread before ending batch transaction (Howard Chu)
eaf8470b Must wait for previous batch to finish before starting new one (Howard Chu)
c903c554 Don't cache block height, always get from DB (Howard Chu)
eb1fb601 Tweak default db-sync-mode to fast:async:1 (Howard Chu)
0693cff9 Use batch transactions when syncing (Howard Chu)
If a checksum word is present, language detection would use
just the word prefixes. However, a set of word prefixes may
be found in more than one language, and so the wrong language
may be found first, which could then fail the checksum, since
the check may be done with a different unique prefix length
from the one it was created from.
We now make a checksum test when we we detect a language from
prefixes only, to make sure we have the correct one.
5783dd8c tests: add unit tests for uri parsing (moneromooo-monero)
82ba2108 wallet: add API and RPC to create/parse monero: URIs (moneromooo-monero)
d9001b43 epee: add functions to convert from URL format (ie, %XX values) (moneromooo-monero)
48b57d8 monero.supp: valgrind suppressions file (moneromooo-monero)
ffd8c41 ringct: check the size of amount_keys is the same as destinations (moneromooo-monero)
836669d ringct: always shutdown the boost io service (moneromooo-monero)
The fee will vary based on the base reward and the current
block size limit:
fee = (R/R0) * (M0/M) * F0
R: base reward
R0: reference base reward (10 monero)
M: block size limit
M0: minimum block size limit (60000)
F0: 0.002 monero
Starts applying at v4
8b20cbf libwallet_api: do not use fast-refresh on recovery (Ilya Kitaev)
10fe626 libwallet_api: fast-refresh in case of opening non-synced wallet (Ilya Kitaev)
0019e31 libwallet_api: fix unhandled exception on address check (Ilya Kitaev)
1f73f80 libwallet_api: fast-refresh for new wallet (Ilya Kitaev)
4789347 libwallet_api: test for create/init wallet on mainnet (Ilya Kitaev)
bba6af9 wallet: cold wallet transaction signing (moneromooo-monero)
9872dcb wallet: fix log confusion between bytes and kilobytes (moneromooo-monero)
d9b0bf9 cryptonote_core: make extra field removal more generic (moneromooo-monero)
98f19d4 serialization: add support for serializing std::pair and std::list (moneromooo-monero)
This change adds the ability to create a new unsigned transaction
from a watch only wallet, and save it to a file. This file can
then be moved to another computer/VM where a cold wallet may load
it, sign it, and save it. That cold wallet does not need to have
a blockchain nor daemon. The signed transaction file can then be
moved back to the watch only wallet, which can load it and send
it to the daemon.
Two new simplewallet commands to use it:
sign_transfer (on the cold wallet)
submit_transfer (on the watch only wallet)
The transfer command used on a watch only wallet now writes an
unsigned transaction set in a file called 'unsigned_monero_tx'
instead of submitting the tx to the daemon as a normal wallet does.
The signed tx file is called 'signed_monero_tx'.
Keep the immediate direct deps at the library that depends on them,
declare deps as PUBLIC so that targets that link against that library
get the library's deps as transitive deps.
Break dep cycle between blockchain_db <-> crytonote_core.
No code refactoring, just hide cycle from cmake so that
it doesn't complain (cycles are allowed only between
static libs, not shared libs).
This is in preparation for supproting BUILD_SHARED_LIBS cmake
built-in option for building internal libs as shared.
Since this queries block heights for blocks that may or may not
exist, queries for non existing blocks would throw an exception,
and that would slow down the loop a lot. 7 seconds to go through
a 30 hash list.
Fix this by adding an optional return block height to block_exists
and using this instead. Actual errors will still throw an
exception.
This also cuts down on log exception spam.
When RingCT is enabled, outputs from coinbase transactions
are created as a single output, and stored as RingCT output,
with a fake mask. Their amount is not hidden on the blockchain
itself, but they are then able to be used as fake inputs in
a RingCT ring. Since the output amounts are hidden, their
"dustiness" is not an obstacle anymore to mixing, and this
makes the coinbase transactions a lot smaller, as well as
helping the TXO set to grow more slowly.
Also add a new "Null" type of rct signature, which decreases
the size required when no signatures are to be stored, as
in a coinbase tx.
This allows the key to be not the same for two outputs sent to
the same address (eg, if you pay yourself, and also get change
back). Also remove the key amounts lists and return parameters
since we don't actually generate random ones, so we don't need
to save them as we can recalculate them when needed if we have
the correct keys.
The whole rct data apart from the MLSAGs is now included in
the signed message, to avoid malleability issues.
Instead of passing the data that's not serialized as extra
parameters to the verification API, the transaction is modified
to fill all that information. This means the transaction can
not be const anymore, but it cleaner in other ways.
Since these are needed at the same time as the output pubkeys,
this is a whole lot faster, and takes less space. Only outputs
of 0 amount store the commitment. When reading other outputs,
a fake commitment is regenerated on the fly. This avoids having
to rewrite the database to add space for fake commitments for
existing outputs.
This code relies on two things:
- LMDB must support fixed size records per key, rather than
per database (ie, all records on key 0 are the same size, all
records for non 0 keys are same size, but records from key 0
and non 0 keys do have different sizes).
- the commitment must be directly after the rest of the data
in outkey and output_data_t.
The mixRing (output keys and commitments) and II fields (key images)
can be reconstructed from vin data.
This saves some modest amount of space in the tx.
It may be suboptimal, but it's a pain to have to rebuild everything
when some of this changes.
Also, no clue why there seems to be two different code paths for
serializing a tx...
This plugs a privacy leak from the wallet to the daemon,
as the daemon could previously see what input is included
as a transaction input, which the daemon hadn't previously
supplied. Now, the wallet requests a particular set of
outputs, including the real one.
This can result in transactions that can't be accepted if
the wallet happens to select too many outputs with non standard
unlock times. The daemon could know this and select another
output, but the wallet is blind to it. It's currently very
unlikely since I don't think anything uses non default
unlock times. The wallet requests more outputs than necessary
so it can use spares if any of the returns outputs are still
locked. If there are not enough spares to reach the desired
mixin, the transaction will fail.
Compilation of bitmonero on Arch with gcc 6.1 results in the following
error:
/home/mwo/bitmonero/tests/unit_tests/hardfork.cpp: In member function ‘virtual void TestDB::set_hard_fork_version(uint64_t, uint8_t)’:
/home/mwo/bitmonero/tests/unit_tests/hardfork.cpp:132:5: error: this ‘if’ clause does not guard... [-Werror=misleading-indentation]
if (versions.size() <= height) versions.resize(height+1); versions[height] = version;
This can be fixed by simply unfolding this line into three lines.
The tests for rejection of unmixable outputs in v2 are commented out,
as there are no unmixable outputs created anymore. This should be
restored at some point.
