^C while in manual refresh will cancel the refresh, since that's
often an annoying thing to have to wait for. Also, a manual refresh
command will interrupt any running background refresh and take
over, rather than wait for the background refresh to be done, and
look to be hanging.
9ee48e9 wallet2: speed up wallet refresh for large miners (moneromooo-monero)
4905903 wallet2: parallelize pulling blocks and processing them on refresh (moneromooo-monero)
d0eaf1d wallet2: maintain the short chain manually when refreshing (moneromooo-monero)
a4e9506 wallet2: split pull blocks between pulling and processing (moneromooo-monero)
The daemon will be polled every 90 seconds for new blocks.
It is enabled by default, and can be turned on/off with
set auto-refresh 1 and set auto-refresh 0 in the wallet.
This allows them to be saved as a fixed (one byte) chunk whatever
the value. Using a varint will use two bytes as the high bit gets
set.
This is backward compatible with current usage (0-2 values).
d887c18 hardfork: fix more major/minor issues (moneromooo-monero)
3b47ca2 hardfork: fix rescan on load (moneromooo-monero)
4cea2b1 Add IP blocking for misbehaving nodes (adapted from Boolberry) (Javier Smooth)
9c64b12 quiet down p2p logging a bit (Javier Smooth)
53c75ab blockchain: log versions as numbers, not characters (moneromooo-monero)
edade8d hardfork: fix actual/voting confusion (moneromooo-monero)
9b945f5 wallet: make the refresh optimizations selectable via command line (moneromooo-monero)
d2c0313 wallet: speedup refresh from daemon (moneromooo-monero)
ea707c7 wallet2: minor cleanup (moneromooo-monero)
55a2da7 wallet2: speedup refresh a bit (moneromooo-monero)
Also add some more tests, and rename some instances of
"version" and "add" for clarity.
NOTE: the starting height values are sometimes wrong.
I suspect this is due to the hard fork reorg code being
buggy, since they're good when syncing after the fact.
However, they're not actually used by the consensus code,
so I'm ignoring this for now, but this needs debugging.
Assume the whole of a coinbase goes to the same address (so that
if the first output isn't for us, none of it is), and only look
for payment id when we received something in the transaction.
Height seemed to be flying all over the place on a rescan here.
Logging to a file shows the heights are actually correct, and
this is some kind of screen refresh artifact. Flush after \r
and update less often to reduce this effect a lot.
f3724ae Fix startup crash when using a locale boost does not like (moneromooo-monero)
0c1dae3 i18n: allow language to be passed as a parameter (moneromooo-monero)
There are various locale related bugs in various versions of boost,
where exceptions are thrown in boost::filesystem APIs when the
current locale is not to boost's liking. It's not clear what "not
to boost's liking" means in detail, though "en" and "en_US.UTF-8"
are not to its liking.
Fix it by running a test function that's known to throw in such
a case, and resetting LANG and LC_ALL to C if an exception is
thrown. In simplewallet, the locale is queried before that so the
correct translations will still be used.
The last relayed time of a transaction is maintained, and
transactions will be relayed again if they are still in the
pool after a certain amount of time, which increases with
the transaction's age. All such transactions are resent,
whether or not they originated on the local node.
baf101e More changes for 2-min blocks Use the correct block time for realtime fuzz on locktime Use the correct block time to calculate next_difficulty on alt chains (will not work as-is with voting) Lock unit tests to original block time for now (Javier Smooth)
4fea1a5 Adjust difficulty target (2 min) and full reward zone (60 kbytes) for block version 2 (Javier Smooth)
It looks like some of the indices passed to the DB access functions
are already bumped by 1. Moreover, the existing code was not
throwing DB errors with 0 keys, and this is unlikely if it really
was using 0 keys. Last, this patch broke sync from scratch in at
least one case. So I'm calling it bad and reverting it.
This reverts commit bfc97401ae.
Use the correct block time for realtime fuzz on locktime
Use the correct block time to calculate next_difficulty on alt chains (will not work as-is with voting)
Lock unit tests to original block time for now
They check whether they're running on testnet by accessing the
m_rpc_server object, which does not exist when in RPC mode.
Also, fix hard_fork_info being called with the wrong API.
43bca0d blockchain_utilities: new blockchain_dump diagnostic tool (moneromooo-monero)
5f397e4 Add functions to iterate through blocks, txes, outputs, key images (moneromooo-monero)
0a5a5e8 db_bdb: record numbers for recno databases start at 1 (moneromooo-monero)
50dfdc0 db_bdb: DB_KEYEMPTY is also not found for non-top recon fields (moneromooo-monero)
572780e blockchain_db: use the DNE exceptions where appropriate (moneromooo-monero)
Displays current block height and target, net hash, hard fork
basic info, and connections.
Useful as a basic user friendly "what's going on here" command.
The wallet and the daemon applied different height considerations
when selecting outputs to use. This can leak information on which
input in a ring signature is the real one.
Found and originally fixed by smooth on Aeon.
Using major version would cause older daemons to reject those
blocks as they fail to deserialize blocks with a major version
which is not 1. There is no such restriction on the minor
version, so switching allows older daemons to coexist with
newer ones till the actual fork date, when most will hopefully
have updated already.
Also, for the same reason, we consider a vote for 0 to be a
vote for 1, since older daemons set minor version to 0.
33affd2 blockchain: on hardfork 2, require mixin 2 at least if possible (moneromooo-monero)
434e0f4 hardfork: make the voting window a week (moneromooo-monero)
0a7421b hardfork: rescan speedup (moneromooo-monero)
fec98b8 hardfork: remove use of GNU extension for initializing object (moneromooo-monero)
4bbf944 blockchain: on hardfork 2, allow miners to claim less money than allowed (moneromooo-monero)
088bc56 hardfork: change window semantics to not count the newly added block (moneromooo-monero)
198f557 blockchain: use different hard fork settings for testnet and mainnet (moneromooo-monero)
This allows knowing the hard fork a block must obey in order to be
added to the blockchain. The previous semantics would use that new
block's version vote to determine this hard fork, which made it
impossible to use the rules to validate transactions entering the
tx pool (and made it impossible to validate a block before adding
it to the blockchain).
3c10239 unbound: use the mini event fallback implementation (moneromooo-monero)
4e138a0 dns_utils: remove unnecessary string conversion (moneromooo-monero)
f928468 dns_utils: factor the fetching code for different DNS record types (moneromooo-monero)
4ef0da1 dns_utils: simplify string handling and fix leak (moneromooo-monero)
ae5f28c dns_utils: add a const where possible (moneromooo-monero)
f43d465 dns_utils: lock access to the singleton (moneromooo-monero)
5990344 dns: make ctor private (moneromooo-monero)
This ensures one can't instanciate a DNSResolver object by
mistake, but uses the singleton. A separate create static
function is added for cases where a new object is explicitely
needed.
0a4bc84 Added ref10 shen_ed25519_ref code, which includes code that can replace crypto-ops with a version straight from Bernstein's ref 10 (ShenNoether)
0d70fdc revert to 776b4fc91a (ShenNoether)
b01f286 Added shen_ed25519_ref to crypto ops subfolder, the point is to directly have bitmonero's crypto code come from bernstein et al's ref 10 code (ShenNoether)
f197599 wallet: encrypt the cache file (moneromooo-monero)
98c76a3 chacha8: add a key generation variant that take a pointer and size (moneromooo-monero)
It contains private data, such as a record of transactions.
The key is derived from the view and spend secret keys.
The encryption currently is one shot, so may require a lot of
memory for large wallet caches.
7c4d6f1 simplewallet: Use default log file name when executable's file path is unknown (warptangent)
b5b0f08 epee: Don't set log file name when process path name isn't found (warptangent)
Default to "simplewallet.log" in current directory when file path isn't
obtained from epee.
In this situation previously, it defaulted to the file name of ".log"
("" + ".log") in the current directory.
(Thanks to @sammy007 for reporting bug.)
An earlier version yet used "" + "/" + ".log" = "/.log", which resulted
in silently not logging in most cases, due to lack of permission.
Test:
PATH=$PATH:</path/to/simplewallet/folder> && simplewallet --wallet-file /dev/null
This results in epee not finding the executable's file path, so
simplewallet will now use a default log filename.
The height function apparently used to return the index of
the last block, rather than the height of the chain. This now
seems to be incorrect, judging the the code, so we remove the
now wrong comment, as well as a couple +/- 1 adjustments
which now cause the median calculation to differ from the
original blockchain_storage version.
This obsoletes the need for a lengthy blockchain rescan when
a transaction doesn't end up in the chain after being accepted
by the daemon, or any other reason why the wallet's idea of
spent and unspent outputs gets out of sync from the blockchain's.
The original code removed key images from a tx from the blockchain
when an non to-key nor gen input was found in that tx. Additionally,
the remainder of the tx data was added to the blockchain only after
the double spend check passed.
2634307 daemon: omit extra set of <> in error message (moneromooo-monero)
0822933 daemon: print a decoded tx in print_tx (moneromooo-monero)
1d678b1 daemon: fix print_tx not find transactions (moneromooo-monero)
It was only used by the older blockchain_storage.
We also move the code to the calling blockchain level, to avoid
replicating the code in every DB implementation. This also makes
the get_random_out method obsolete, and we delete it.
Pros:
- smaller on the blockchain
- shorter integrated addresses
Cons:
- less sparseness
- less ability to embed actual information
The boolean argument to encrypt payment ids is now gone from the
RPC calls, since the decision is made based on the length of the
payment id passed.
A payment ID may be encrypted using the tx secret key and the
receiver's public view key. The receiver can decrypt it with
the tx public key and the receiver's secret view key.
Using integrated addresses now cause the payment IDs to be
encrypted. Payment IDs used manually are not encrypted by default,
but can be encrypted using the new 'encrypt_payment_id' field
in the transfer and transfer_split RPC calls. It is not possible
to use an encrypted payment ID by specifying a manual simplewallet
transfer/transfer_new command, though this is just a limitation
due to input parsing.
If there's no blocks in database (m_height == 0):
Don't assign incorrect block range to check.
Skip average block size check.
Test:
Run blockchain_converter with an existing source blockchain.bin and
a non-existent LMDB destination database.
The converter creates a BlockchainLMDB instance with zero height, due to
not being initialized with a genesis block, normally done by
Blockchain::init(). While different than the behavior of bitmonerod,
blockchain_import, and blockchain_export, the initialization hasn't been
strictly necessary.
The db batch size estimation normally uses an average block size, or a
default minimum block size, whichever is greater. In this case, as
there's no existing blocks to check for an average block size, the
default should be used.
It should avoid a lot of the issues sending more than half the
wallet's contents due to change.
Actual output selection is still random. Changing this would
improve the matching of transaction amounts to output sizes,
but may have non obvious effects on blockchain analysis.
Mapped to the new transfer_new command in simplewallet, and
transfer uses the existing algorithm.
To use in RPC, add "new_algorithm: true" in the transfer_split
JSON command. It is not used in the transfer command.
boost doesn't support %zu for size_t, and the previous change
to %u could technically lose bits (though it would require splitting
a transfer into 4 billion transactions, which seems unlikely).
Bockchain:
1. Optim: Multi-thread long-hash computation when encountering groups of blocks.
2. Optim: Cache verified txs and return result from cache instead of re-checking whenever possible.
3. Optim: Preload output-keys when encoutering groups of blocks. Sort by amount and global-index before bulk querying database and multi-thread when possible.
4. Optim: Disable double spend check on block verification, double spend is already detected when trying to add blocks.
5. Optim: Multi-thread signature computation whenever possible.
6. Patch: Disable locking (recursive mutex) on called functions from check_tx_inputs which causes slowdowns (only seems to happen on ubuntu/VMs??? Reason: TBD)
7. Optim: Removed looped full-tx hash computation when retrieving transactions from pool (???).
8. Optim: Cache difficulty/timestamps (735 blocks) for next-difficulty calculations so that only 2 db reads per new block is needed when a new block arrives (instead of 1470 reads).
Berkeley-DB:
1. Fix: 32-bit data errors causing wrong output global indices and failure to send blocks to peers (etc).
2. Fix: Unable to pop blocks on reorganize due to transaction errors.
3. Patch: Large number of transaction aborts when running multi-threaded bulk queries.
4. Patch: Insufficient locks error when running full sync.
5. Patch: Incorrect db stats when returning from an immediate exit from "pop block" operation.
6. Optim: Add bulk queries to get output global indices.
7. Optim: Modified output_keys table to store public_key+unlock_time+height for single transaction lookup (vs 3)
8. Optim: Used output_keys table retrieve public_keys instead of going through output_amounts->output_txs+output_indices->txs->output:public_key
9. Optim: Added thread-safe buffers used when multi-threading bulk queries.
10. Optim: Added support for nosync/write_nosync options for improved performance (*see --db-sync-mode option for details)
11. Mod: Added checkpoint thread and auto-remove-logs option.
12. *Now usable on 32-bit systems like RPI2.
LMDB:
1. Optim: Added custom comparison for 256-bit key tables (minor speed-up, TBD: get actual effect)
2. Optim: Modified output_keys table to store public_key+unlock_time+height for single transaction lookup (vs 3)
3. Optim: Used output_keys table retrieve public_keys instead of going through output_amounts->output_txs+output_indices->txs->output:public_key
4. Optim: Added support for sync/writemap options for improved performance (*see --db-sync-mode option for details)
5. Mod: Auto resize to +1GB instead of multiplier x1.5
ETC:
1. Minor optimizations for slow-hash for ARM (RPI2). Incomplete.
2. Fix: 32-bit saturation bug when computing next difficulty on large blocks.
[PENDING ISSUES]
1. Berkely db has a very slow "pop-block" operation. This is very noticeable on the RPI2 as it sometimes takes > 10 MINUTES to pop a block during reorganization.
This does not happen very often however, most reorgs seem to take a few seconds but it possibly depends on the number of outputs present. TBD.
2. Berkeley db, possible bug "unable to allocate memory". TBD.
[NEW OPTIONS] (*Currently all enabled for testing purposes)
1. --fast-block-sync arg=[0:1] (default: 1)
a. 0 = Compute long hash per block (may take a while depending on CPU)
b. 1 = Skip long-hash and verify blocks based on embedded known good block hashes (faster, minimal CPU dependence)
2. --db-sync-mode arg=[[safe|fast|fastest]:[sync|async]:[nblocks_per_sync]] (default: fastest:async:1000)
a. safe = fdatasync/fsync (or equivalent) per stored block. Very slow, but safest option to protect against power-out/crash conditions.
b. fast/fastest = Enables asynchronous fdatasync/fsync (or equivalent). Useful for battery operated devices or STABLE systems with UPS and/or systems with battery backed write cache/solid state cache.
Fast - Write meta-data but defer data flush.
Fastest - Defer meta-data and data flush.
Sync - Flush data after nblocks_per_sync and wait.
Async - Flush data after nblocks_per_sync but do not wait for the operation to finish.
3. --prep-blocks-threads arg=[n] (default: 4 or system max threads, whichever is lower)
Max number of threads to use when computing long-hash in groups.
4. --show-time-stats arg=[0:1] (default: 1)
Show benchmark related time stats.
5. --db-auto-remove-logs arg=[0:1] (default: 1)
For berkeley-db only. Auto remove logs if enabled.
**Note: lmdb and berkeley-db have changes to the tables and are not compatible with official git head version.
At the moment, you need a full resync to use this optimized version.
[PERFORMANCE COMPARISON]
**Some figures are approximations only.
Using a baseline machine of an i7-2600K+SSD+(with full pow computation):
1. The optimized lmdb/blockhain core can process blocks up to 585K for ~1.25 hours + download time, so it usually takes 2.5 hours to sync the full chain.
2. The current head with memory can process blocks up to 585K for ~4.2 hours + download time, so it usually takes 5.5 hours to sync the full chain.
3. The current head with lmdb can process blocks up to 585K for ~32 hours + download time and usually takes 36 hours to sync the full chain.
Averate procesing times (with full pow computation):
lmdb-optimized:
1. tx_ave = 2.5 ms / tx
2. block_ave = 5.87 ms / block
memory-official-repo:
1. tx_ave = 8.85 ms / tx
2. block_ave = 19.68 ms / block
lmdb-official-repo (0f4a036437)
1. tx_ave = 47.8 ms / tx
2. block_ave = 64.2 ms / block
**Note: The following data denotes processing times only (does not include p2p download time)
lmdb-optimized processing times (with full pow computation):
1. Desktop, Quad-core / 8-threads 2600k (8Mb) - 1.25 hours processing time (--db-sync-mode=fastest:async:1000).
2. Laptop, Dual-core / 4-threads U4200 (3Mb) - 4.90 hours processing time (--db-sync-mode=fastest:async:1000).
3. Embedded, Quad-core / 4-threads Z3735F (2x1Mb) - 12.0 hours processing time (--db-sync-mode=fastest:async:1000).
lmdb-optimized processing times (with per-block-checkpoint)
1. Desktop, Quad-core / 8-threads 2600k (8Mb) - 10 minutes processing time (--db-sync-mode=fastest:async:1000).
berkeley-db optimized processing times (with full pow computation)
1. Desktop, Quad-core / 8-threads 2600k (8Mb) - 1.8 hours processing time (--db-sync-mode=fastest:async:1000).
2. RPI2. Improved from estimated 3 months(???) into 2.5 days (*Need 2AMP supply + Clock:1Ghz + [usb+ssd] to achieve this speed) (--db-sync-mode=fastest:async:1000).
berkeley-db optimized processing times (with per-block-checkpoint)
1. RPI2. 12-15 hours (*Need 2AMP supply + Clock:1Ghz + [usb+ssd] to achieve this speed) (--db-sync-mode=fastest:async:1000).
fd73d9c Check and resize if needed at batch transaction start (warptangent)
f9e4afd blockchain_utilities: Increase debug statement's log level (warptangent)
699e4b3 blockchain_utilities: Pass expected number of blocks when starting batch (warptangent)
6e170c8 Optionally allow DB to know expected number of blocks at batch transaction start (warptangent)
This currently only affects blockchain_import and blockchain_converter.
When the number of blocks expected for the batch transaction is
provided, make an estimate of the DB space needed. If not enough free
space remains, resize the DB.
The estimate is made based on:
- the average size of the last 500 blocks, or if larger, a min. block
size of 4k
- a factor for the expanded size a block occupies in the DB across the
sub-dbs/tables
- a safety factor (1.7) to allow for a "reasonable" average block size
increase over the batch
Increase the DB size by whichever is greater: the estimated size needed
or a minimum increase size, currently 128 MB.
The conservative factors in the estimate help in testing that the resize
occurs when needed, and without gratuitous size increases. For common
use, the safety factor and minimum increase size could reasonably be
increased.
For testing, setting DEFAULT_MAPSIZE (blockchain_db/lmdb/db_lmdb.h) to 1
<< 27 (128 MB) and recompiling will ensure DB resizes take place sooner
and more frequently.
dc4dbc1 simplewallet: allow creating a wallet from a public address and view secret key (moneromooo-monero)
6a0f61d account: allow creating an account from a public address and view secret key (moneromooo-monero)
e05a58a wallet2: fix write_watch_only_wallet comment description (moneromooo-monero)
4bf6f0d simplewallet: forbid seed commands for watch only wallets (moneromooo-monero)
It uses the async console handler differently than simplewallet,
and wasn't running the same exit code, causing it to never actually
exit after breaking out of the console entry loop.
The new save_watch_only saves a copy of the keys file without the
spend key. It can then be given away to be used as a normal keys
file, but with no spend ability.
Sends all the dust to your own wallet. May fail (if the fee required
is more than the dust total). May end up paying most of the dust in fees.
Unlocked dust total is now also displayed in "balance".
5680604 Replace hardcoded value with existing constant of same value (warptangent)
f37ee2f Update database resize behavior (warptangent)
f85cd8e Include database error in more error messages (warptangent)
Replace --set_log with --log-level for consistency.
Show default log level in usage.
Add --log-file for specifying log file path.
Document log file path.
Display log file path at startup.
As with display of seed, don't log view key and spend key.
Includes:
- display of viewkey at wallet creation
- "viewkey" command output
- "spendkey" command output
Add fix for compile error with multiple uses of peerid_type (uint64_t)
variable in lambda expression.
- known GCC issue: https://gcc.gnu.org/bugzilla/show_bug.cgi?id=65843
epee: replace return value of nullptr for expected boolean with false.
Fixes#231.
The random selection of a node shouldn't favor repeats that occur in the
hardcoded and DNS seed node lists.
Remove hardcoded ":18080" address which gives parse error.
Test: bitmonerod --log-level 2
The seed node list displayed at startup shouldn't show duplicate
addresses (includes port).
Based on tewinget's update.
Make OpenAlias address format independent of existing DNS functions.
Add tests.
Test:
make debug-test
cd build/debug/tests/unit_tests
# test that regular DNS functions work, including IPv4 lookups.
# also test function that converts OpenAlias address format
make && ./unit_tests --gtest_filter=DNSResolver*
# test that OpenAlias addresses like donate@getmonero.org work from
# wallet tools
make && ./unit_tests --gtest_filter=AddressFromURL.Success
Add public method blockchain_storage::debug_pop_block_from_blockchain()
Ensure blockchain_import calls destructors before exit.
To test:
DATABASE=memory make release
// create blockchain.bin from blockchain.raw if needed
build/release/bin/blockchain_import --block-stop 1000
// try popping a single block
build/release/bin/blockchain_import --pop-blocks 1
Some filesystems (*cough* NTFS *cough*) aren't good with sparse files,
so this makes LMDB dynamically resize its mapsize as needed. Note: the
check interval is currently every 10 blocks (for testing) and will
probably need to change to 1000 or something. Default mapsize set to
1GiB.
Blockchain conversion tools using batching will probably segfault, I'll
fix that in the next commit.
Remove repeated coinbase tx in each exported block's data.
Add resume from last exported height to blockchain_export, making it the
default behavior when the file already exists.
Start reorganizing the utilities.
Various cleanup.
Update output, including referring to both height and block numbers as
zero-based instead of one-based. This better matches the block data,
rather than just some parts of the existing codebase.
Use smaller default batch sizes for importer when verifying, so progress
is saved more frequently.
Use small default batch size (1000) for importer on Windows, due to
current issue with big transaction sizes on LMDB.
file format
-----------
[4-byte magic | variable-length header | block data]
header
------
4-byte file_info length
file_info struct
file format major version
file format minor version
header length (includes file_info struct)
[rest of header, padded with 0 bytes up to header length]
block data
----------
4-byte chunk/block_package length
block_package struct
block
txs (coinbase/miner tx included already in block)
block_size
cumulative_difficulty
coins_generated
4-byte chunk/block_package length
block_package struct
[...]
7d8acd1 explicitly disable AES on ARM (Riccardo Spagni)
4222b37 add arm6 target and flags (Riccardo Spagni)
5675325 new makefile targets for static builds (Riccardo Spagni)
9519526 Only compile BerkeleyDB as an option in non-static (Thomas Winget)
7b14d4a Steps toward multiple dbs available -- working (Thomas Winget)
dbdcf11 blockchain_converter: Add support for resume from last block (warptangent)
4880803 blockchain_import: lengthen string for line clear (warptangent)
7476d2e blockchain_export: show progress during export (warptangent)
4bedd68 Update Blockchain::get_db() to return reference instead of pointer (warptangent)
0386e99 Add README for blockchain converter, importer, and exporter utilities (warptangent)
ead7fad BerkeleyDB implementation of BlockchainDB seems to be working! (Thomas Winget)
ffadb65 blockchain_export: Add compile-time support for BlockchainDB (warptangent)
f6cbfb6 Add blockchain_export utility (warptangent)
275cbd4 Add support for database open with flags (warptangent)
cb862cb Add mdb_flags variable to LMDB database open (warptangent)
260cc56 Add blockchain_import utility (warptangent)
ca75b47 Blockchain: add get_db() accessor, needed for blockchain_import (warptangent)
a3dd9d1 blockchain_converter: Add support for batch transactions (warptangent)
acb5d29 Update and relocate comment that applies class wide (warptangent)
bd9da6d Merges #33 (Thomas Winget)
6e9e8ab Move db_drivers/ to external/ (Thomas Winget)
56a1bf5 fixed BUILD_64 option (Riccardo Spagni)
c97a685 fixed arch_width option (Riccardo Spagni)
3a3c07c fixed msys2 / mingw folders based on architecture, added license to unbound CMakeList as that is not part of standard Unbound (Riccardo Spagni)
3b3da86 moved 32-bit/64-bit detection into main CMakeLists (Riccardo Spagni)
a0cbf73 removed findlmdb.cmake, no longer required (Riccardo Spagni)
0e8bbdb 32-bit LMDB, removed check for in-system LMDB as it is consensus-critical (Riccardo Spagni)
11e8157 Revert "Moved db_drivers/ into external/ for consistency" (Thomas Winget)
daf2a8f Revert "Build fixed, goofed up some CMake" (Thomas Winget)
e146027 BlockchainBDB passes unit tests (Thomas Winget)
43477b7 BerkeleyDB Blockchain building, not working yet (Thomas Winget)
cade0da CMake wiring, minor cleanup, minor test addition (Thomas Winget)
1bc8939 BerkeleyDB BlockchainDB impl copy/paste/modify (Thomas Winget)
5112dc3 Try to not pollute cryptonote namespace (Thomas Winget)
edef0bb Initial commit of BDB BlockchainDB implementation (Thomas Winget)
eee3ee7 BlockchainDB implementations have names now (Thomas Winget)
5d2a2b7 Fixed includes in BlockchainDB unit tests (Thomas Winget)
8b82f3c Build fixed, goofed up some CMake (Thomas Winget)
b213356 Moved db_drivers/ into external/ for consistency (Thomas Winget)
5eab480 Moved BlockchainDB into its own src/ subfolder (Thomas Winget)
0ad0784 Changed log level of debug message -- too spammy (Thomas Winget)
6485dac BlockchainLMDB: Add profiling to tx_exists() (warptangent)
83fb6d8 BlockchainLMDB: Add batch transaction support to tx_exists() (warptangent)
8529c0e BlockchainDB, BlockchainLMDB: Add profiling for DB commits (warptangent)
7a66b8b BlockchainDB: Add virtual function declarations for batch transactions (warptangent)
b7a2d84 BlockchainLMDB: Add check for open database to two functions (warptangent)
58ecc58 BlockchainLMDB: Add support for batch transactions (warptangent)
8909d7d Improve block and tx processing efficiency by less repeat hashing (warptangent)
3676ac5 Add profiling to block and tx processing (warptangent)
ce71abd Move LMDB storage to subfolder (warptangent)
42f8fe5 Fix formatting (warptangent)
aa82f78 Fix log statement (warptangent)
26873db Remove unused variable (warptangent)
4b90fd3 Add log statement (warptangent)
2531aa3 Add and extend log statements (warptangent)
59305d3 Blockchain: match original function declaration from blockchain_storage (warptangent)
cd972bd Update year and formatting in license (warptangent)
b88ab64 Fix Blockchain::get_tail_id() to set parameter to last block number instead of height (warptangent)
963bc09 Revert "Bounds error, should fix#27" (warptangent)
6f1c4b4 Bounds error, should fix#27 (Thomas Winget)
84fe5fb Add compile-time support for both db implementations: in-memory and LMDB (warptangent)
8bd1983 Blockchain: reflect log updates from blockchain_storage (warptangent)
7f9b070 Blockchain: reflect log and assert updates from blockchain_storage (warptangent)
70342ec Blockchain: reflect log level of blockchain_storage (warptangent)
c8d27fb Blockchain: reflect assert behavior of blockchain_storage for get_tx_outputs_gindexs() (warptangent)
d00ee78 Update recently added log statement to fix possible null dereference (warptangent)
acd4c36 Should fix std::min issues related to size_t (Thomas Winget)
3488359 Add in-source lmdb to build process (Thomas Winget)
4e45fae Initial import of lmdb source (Thomas Winget)
800d9b9 Remove code previously made unused and marked unused (warptangent)
0840c2f Fix height assertion in Blockchain::handle_alternative_block() (warptangent)
63051be Fix comparison between main and alternate chain's cumulative difficulty. (warptangent)
909ea81 Remove a have_block() check so alternate block can be processed (warptangent)
4d0a94b Complete implementation of transaction removal (warptangent)
1701c26 Use block index when obtaining block's difficulty for log statement (warptangent)
4eba21f Fix transfers to support mixins (warptangent)
d045dfa Fix transfers (without mixins) (warptangent)
429a740 throw inline functions need to keep exception type (Thomas Winget)
14555ee Fixes segfault in Blockchain::handle_alternative_block (Thomas Winget)
5086ca1 add BlockchainDB tests to new cmake (Thomas Winget)
c5c100c Obtain tx hash and tx output index from amount and output offset (warptangent)
ad8200a db_lmdb: fix global index calculation off by 1 (moneromooo-monero)
57b80c5 db_lmdb: remove redundant checks (moneromooo-monero)
1362846 blockchain_converter: add --testnet for converting testnet blockchain (moneromooo-monero)
c50cd95 Fixes a bug with getting output metadata from BlockchainDB (Thomas Winget)
c3fa07b update comments to reflect changed code (Thomas Winget)
59d2b0e db_lmdb: do not give the group database write permissions (moneromooo-monero)
4c2a452 db_lmdb: catch attempt to remove block from an empty blockchain (moneromooo-monero)
3a3459d db_lmdb: factor all the log+throw code paths (moneromooo-monero)
3fcb8da db_lmdb: factor the MDB_val setup code (moneromooo-monero)
609cf7f blockchain_converter: a bit more user friendly output (moneromooo-monero)
2b9f737 blockchain_converter: only call data path function once (moneromooo-monero)
1860658 blockchain: do not append "testnet" to the data directory (moneromooo-monero)
1c578ad db_lmdb: remove block timestamp too when removing a block (moneromooo-monero)
c93a186 db_lmdb: do not cast const away (moneromooo-monero)
198368b blockchain: fix wallet syncing from scratch (moneromooo-monero)
1d23db2 db_lmdb: do not keep a dangling pointer to stack objects (moneromooo-monero)
29b5876 db_lmdb: make cursor internal members private (moneromooo-monero)
a3157d7 blockchain_storage: refactor genesis block creation (moneromooo-monero)
8e41b1e blockchain_storage: add consts where appropriate (moneromooo-monero)
98bdadc blockchain_converter: delete blockchain on succesful exit (moneromooo-monero)
256162f checkpoints: add consts where appropriate (moneromooo-monero)
b7270ab blockchain: add consts where appropriate (moneromooo-monero)
23f3cb4 blockchain_db: add consts where appropriate (moneromooo-monero)
10fd6ca blockchain_db: factor some exception code (moneromooo-monero)
11129b9 blockchain_converter: use the actual blockchain location (moneromooo-monero)
0886183 build: add liblmdb to the cmake autodetection system (moneromooo-monero)
215e63b extraneous semicolon in Blockchain::complete_timestamps_vector (Thomas Winget)
8e1b7e2 raised maximum mapsize for lmdb to ~16GB (Thomas Winget)
6c8b8ac more blockchain height-related fixes, syncing other nodes code this time (Thomas Winget)
9455e0c ~ didn't work, need hard path. debug print. (Thomas Winget)
4af0918 very, VERY primitive blockchain converter (Thomas Winget)
26a7db3 add new checkpointing behavior to Blockchain class (Thomas Winget)
767aac2 Remove unused dependency (Thomas Winget)
006e106 Store output pubkeys separately, bug fixes (Thomas Winget)
ab7951d Minor bugfixes, redundancy removal (Thomas Winget)
71b18d7 moar bug fixes, removed debug prints (Thomas Winget)
0915913 BlockchainLMDB seems to be working*! (Thomas Winget)
1a546e3 some bug fixes, but still needs work (Thomas Winget)
006afe2 Minor bug fixes and debug prints (Thomas Winget)
90f402e minor fixes to Blockchain.cpp (Thomas Winget)
74a1a89 Integrate BlockchainDB into cryptonote_core (Thomas Winget)
d8c570b All LMDB BlockchainDB implemented, not tested (Thomas Winget)
e47e343 LMDB blockchain: remove outputs and spent keys (Thomas Winget)
a0af217 Adding block data to LMDB BlockchainDB coded (Thomas Winget)
db00ce0 Parts of LMDB impl of BlockchainDB done and working (Thomas Winget)
1240cf8 BlockchainDB unit tests, lmdb linker flag (Thomas Winget)
b98b964 Initial commit of lmdb BlockchainDB impl (Thomas Winget)
bc44bc1 Initial commit of BlockchainDB tests, other misc (Thomas Winget)
90d6f8b Adding libglim as an external library (Thomas Winget)
07733f9 update new blockchain to build with new changes (Thomas Winget)
1ffbeb2 stupid past me, fixing typos and shit... (Thomas Winget)
67515b8 missing typedef (Thomas Winget)
aba548c import of BlockchainDB files (Thomas Winget)
Due to a bug in unbound, we were passing a string containing a null
character to ub_ctx_resolvconf and ub_ctx_hosts rather than a NULL
pointer. On *nix this wasn't causing headache, but on Windows this was
causing unbound to not correctly load DNS settings from the OS.
Note on the bug: in a Windows-specific code branch in the function
ub_ctx_hosts(), if the hosts file specified was a NULL pointer, a call
to getenv() was stored in a local char* and later freed. This is
incorrect, as we do not own that data, and caused the program to crash.
Daemon interactive mode is now working again.
RPC mapped calls in daemon and wallet have both had connection_context
removed as an argument as that argument was not being used anywhere.
b43716c Do store transaction's blob size in transaction_chain_entry (Sergey Kazenyuk)
3be518f Use single get_transaction_hash to get both id and blob size (Sergey Kazenyuk)
There will need to be some more refactoring for these changes to be
considered complete/correct, but for now it's working.
new daemon cli argument "--db-type", works for LMDB and BerkeleyDB.
A good deal of refactoring is also present in this commit, namely
Blockchain no longer instantiates BlockchainDB, but rather is passed a
pointer to an already-instantiated BlockchainDB on init().
DNSSEC is now implemented with the hardcoded key from unbound.
This will need to be not hardcoded in the future, but is okay for now.
Unit tests updated for DNSSEC (as well as for the fact that, contrary to
previous assumption, example.com does not have a static IP address).
This allows an LMDB database to be used as the blockchain to export.
Adjust SOURCE_DB in src/blockchain_converter/blockchain_export.h
depending on needs. Defaults to DB_MEMORY.
DB_MEMORY is a sensible default for users migrating to LMDB, as it
allows the exporter to use the in-memory blockchain while the other
binaries work with LMDB, without recompiling anything.
Everything except actually *using* BlockchainBDB is wired up, but the db
itself is not yet working. Some error about user mem not large enough.
I think I know what this error means, but I can't determine the cause.
Notes: BerkeleyDB does not allow 0-indexing in its recno type databases,
so block numbers *in the database* will be 1-indexed. Modifications
to indexing have been made as needed.
LMDB implementation code copy/paste/modified into the Berkeley DB
implementation. Need to test if it builds, then if it works, and so on,
but the code is all there.
Add support to:
- BlockchainDB, BlockchainLMDB
- blockchain_import utility to open LMDB database with one or more
LMDB flags.
Sample use:
$ blockchain_import --database lmdb#nosync
$ blockchain_import --database lmdb#nosync,nometasync
This imports to the blockchain database from an exported blockchain
file.
It can be used to bootstrap a new database or to add blocks to an
existing one.
Supports:
- both the in-memory and LMDB implementations
- optional: batching, verification, testnet
See help for usage.
Based on work by tomerkon.
See https://github.com/tomerkon
src/cryptonote_core/bootfileloader.{h,cpp}
Add log level support.
Add testnet support.
Add command-line options:
--help
--data-dir
--testnet-data-dir
--testnet
--log-level
--batch
--batch-size
--block-number
See help for usage. Run at log level 1 to see profiling stats.
In order to make things more general, BlockchainDB now has get_db_name()
which should return a string with the "name" of that type of db.
This "name" will be the subfolder name that holds that db type's files
within the monero folder.
Small bugfix: blockchain_converter was not correctly appending this in
the prior hard-coded-string implementation of the subfolder data
directory concept.
Ostensibly janitorial work, but should be more relevant later down the
line. Things that depend on core cryptonote things (i.e.
cryptonote_core) don't necessarily depend on BlockchainDB and thus
have no need to have BlockchainDB baked in with them.
+toc -doc -drmonero
Fixed the windows path, and improved logging and data
(for graph) logging, fixed some locks and added more checks.
Still there is a locking error,
not added by my patches, but present in master version
(locking of map/list of peers).
This was changed because sometimes the daemon does not complete its exit
routine with this method, but as it does correctly wind most things down
even if it gets stuck I've changed it back.
The RPC calls the daemon executable uses to talk to the running daemon
instance have mostly been added back in. Rate limiting has not been
added in upstream, but is on its way in a separate effort, so those
calls are still NOPed out.
many RPC functions added by the daemonize changes
(and related changes on the upstream dev branch that were not merged)
were commented out (apart from return). Other than that, this *should*
work...at any rate, it builds, and that's something.
new update of the pr with network limits
more debug options:
discarding downloaded blocks all or after given height.
trying to trigger the locking errors.
debug levels polished/tuned to sane values.
debug/logging improved.
warning: this pr should be correct code, but it could make
an existing (in master version) locking error appear more often.
it's a race on the list (map) of peers, e.g. between closing/deleting
them versus working on them in net-limit sleep in sending chunk.
the bug is not in this code/this pr, but in the master version.
the locking problem of master will be fixed in other pr.
problem is ub, and in practice is seems to usually cause program abort
(tested on debian stable with updated gcc). see --help for option
to add sleep to trigger the error faster.
Update of the PR with network limits
works very well for all speeds
(but remember that low download speed can stop upload
because we then slow down downloading of blockchain
requests too)
more debug options
fixed pedantic warnings in our code
should work again on Mac OS X and FreeBSD
fixed warning about size_t
tested on Debian, Ubuntu, Windows(testing now)
TCP options and ToS (QoS) flag
FIXED peer number limit
FIXED some spikes in ingress/download
FIXED problems when other up and down limit
commands and options for network limiting
works very well e.g. for 50 KiB/sec up and down
ToS (QoS) flag
peer number limit
TODO some spikes in ingress/download
TODO problems when other up and down limit
added "otshell utils" - simple logging (with colors, text files channels)
Usage:
default is lmdb for blockchain branch:
$ make release
same as:
$ DATABASE=lmdb make release
for original in-memory implementation:
$ DATABASE=memory make release
